From: Stephen Berman <stephen.berman@gmx.net>
To: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Peter Zijlstra <peterz@infradead.org>,
linux-kernel@vger.kernel.org
Subject: Re: power-off delay/hang due to commit 6d25be57 (mainline)
Date: Fri, 08 May 2020 23:30:45 +0200 [thread overview]
Message-ID: <87v9l65d2y.fsf@gmx.net> (raw)
In-Reply-To: <20200506215713.qoo4enq32ckcjmz7@linutronix.de> (Sebastian Andrzej Siewior's message of "Wed, 6 May 2020 23:57:13 +0200")
[-- Attachment #1: Type: text/plain, Size: 5002 bytes --]
On Wed, 6 May 2020 23:57:13 +0200 Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:
> On 2020-05-01 17:46:48 [+0200], Stephen Berman wrote:
>> I'm experiencing a delay or hang in powering off my computer after `halt
>> -d -f -i -p' and I've bisected it to this commit in the mainline tree:
>
> You refer to a normal "poweroff" or is this some kind of "shutdown now"
> kind of thing? Unless I'm mistaken, the `halt' command above will turn
> off the machine without stopping user tasks (as in "reaching shutdown
> level").
What I actually do is `shutdown -h now' but my understanding is that (at
least in LFS) the last thing that happens when `shutdown -h now' runs is
effectively the same as `halt -d -f -i -p'. The reason I wrote that
above is because I did not start timing immediately when I entered
`shutdown -h now', since it displays messages of the actions it takes,
like unmounting filesystems and so on. I start timing after the last
message before powering off (or before the hang/delay), which in LFS is
"Bringing down the loopback interface". When powering off succeeds
normally, it takes ~4 seconds after that message appears. I've since
tested directly entering `halt -d -f -i -p' with kernel 5.1.0: there
were no messages like with `shutdown -h now' and after ~4 seconds, the
machine powered off, which seems to confirm my understanding. I also
tested `halt -d -f -i -p' with kernel 5.6.4, and here, too, there were
no messages like with `shutdown -h now' but after ~7 seconds this
appeared in the tty:
sd 4:0:0:0: [sda] tag#13 timing out command, waited 7s
and after two minutes, this:
sr 5:0:0:0: tag#14 timing out command, waited 120s
and then I pressed the reset button.
> …
>> The delays have varied in length from ~20 seconds to seeminingly
>> indefinitely long (the longest I've waited before pressing the start
>> button on the machine is 6 minutes). With kernels prior to this commit,
>> my machine powers off within 4 seconds after the halt invocation.
>
> So you say that normally the machine shuts down immediately but now it
> takes 20secs+ if it shuts down at all?
Yes.
> …
>> sr 5:0:0:0: tag#21 timing out command, waited 120s
>
> The CD-drive is polled regularly so it notices when a CD us inserted /
> removed. It seems that one of the requests wasn't answered and it ended
> up in timeout.
But the drive is always not in use and empty when I run `shutdown -h
now' (in fact I rarely use that drive at all). And the message I
referred to above "sd 4:0:0:0: [sda] tag#13 timing out command, waited
7s" seems to indicate that other polling requests also aren't answered.
> …
>> minutes. But after running emacs in a tty (and then killing it), the
>> delay was seemingly indefinite, as it is with my usual workflow with X,
>> emacs, firefox, etc. running (but I always kill them before invoking
>> `shutdown -h now' from a tty). During the bisection I tested each
>> kernel build by running startx, emacs, firefox, killing these, then
>> `shutdown -h now'. I've attached the git log of the bisection augmented
>> with power-off timing notes. (FWIW, when I reboot the machine with
>> `shutdown -r now' there is no delay with the problematic kernels.)
>
> So reboot is not affected, just the halt.
Yes.
> Could you please check if the
> "poweroff" variant is also affected?
I have tried `poweroff' and also `shutdown -hP now' and these make no
difference: with kernel 5.1.0 and earlier, the machine powers off
promptly, with 5.2.0 and later it doesn't.
> …
>> Another pointer I got was to the recent commit 62849a96, which fixes a
>> bug due to the commit that causes my problem. I applied 62849a96 to
>> 5.6.4, but it did not prevent the delay/hang.
>
> You should see a warning if you were facing the problem described in the
> commit.
I didn't see any warning, so that doesn't seem related to my issue.
> …
>> Please let me know if there's any
>> other information I can provide or anything else I can do to help with
>> debugging this issue. I hope you can fix it.
>
> Can you send dmesg output of the system / lspci -k? I'm mainly
> interested what drivers are bound to storage devices (you can send it
> offlist if you want).
I've attached them (I included dmesg both from the "good" kernel 5.1.0
and the "bad" kernel 5.6.4; they differ somewhat but I don't know if the
differences are significant).
> Can you log the output on the serial console?
How do I do that?
> If the commit you cited is really the problem then it would mean that a
> worker isn't scheduled for some reason. Could you please enable
> CONFIG_WQ_WATCHDOG to see if workqueue core code notices that a worker
> isn't making progress?
How will I know if that happens, is there a specific message in the tty?
Thanks for your reply.
Steve Berman
[-- Attachment #2: dmesg-5.1.0 --]
[-- Type: application/octet-stream, Size: 58875 bytes --]
[ 0.000000] Linux version 5.1.0 (steve@strobe-jhalfs) (gcc version 9.3.0 (GCC)) #1 SMP Fri Apr 17 21:11:51 CEST 2020
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-lfs-SVN-20200401 root=/dev/nvme0n1p5
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000303defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000303df000-0x00000000303dffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000303e0000-0x00000000303e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000303e1000-0x0000000038be2fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000038be3000-0x0000000039054fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000039055000-0x00000000394cbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000394cc000-0x00000000395b4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000395b5000-0x0000000039efefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000039eff000-0x0000000039efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000039f00000-0x000000003f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004be7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x2e6e9018-0x2e6f9e57] usable ==> usable
[ 0.000000] e820: update [mem 0x2e6e9018-0x2e6f9e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000002e6e9017] usable
[ 0.000000] reserve setup_data: [mem 0x000000002e6e9018-0x000000002e6f9e57] usable
[ 0.000000] reserve setup_data: [mem 0x000000002e6f9e58-0x00000000303defff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000303df000-0x00000000303dffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000303e0000-0x00000000303e0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000303e1000-0x0000000038be2fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000038be3000-0x0000000039054fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000039055000-0x00000000394cbfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000394cc000-0x00000000395b4fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000395b5000-0x0000000039efefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000039eff000-0x0000000039efffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000039f00000-0x000000003f7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004be7fffff] usable
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x394e9000 ACPI=0x394e9000 SMBIOS=0x39c41000 SMBIOS 3.0=0x39c40000 ESRT=0x34f05998 MEMATTR=0x3717a018
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z390 M GAMING/Z390 M GAMING-CF, BIOS F5 03/14/2019
[ 0.000000] tsc: Detected 3200.000 MHz processor
[ 0.002695] tsc: Detected 3192.000 MHz TSC
[ 0.002695] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.002696] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.002699] last_pfn = 0x4be800 max_arch_pfn = 0x400000000
[ 0.002700] MTRR default type: write-back
[ 0.002701] MTRR fixed ranges enabled:
[ 0.002701] 00000-9FFFF write-back
[ 0.002702] A0000-BFFFF uncachable
[ 0.002702] C0000-FFFFF write-protect
[ 0.002702] MTRR variable ranges enabled:
[ 0.002703] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.002703] 1 base 0040000000 mask 7FC0000000 uncachable
[ 0.002704] 2 base 003C000000 mask 7FFC000000 uncachable
[ 0.002704] 3 base 003B000000 mask 7FFF000000 uncachable
[ 0.002704] 4 disabled
[ 0.002704] 5 disabled
[ 0.002705] 6 disabled
[ 0.002705] 7 disabled
[ 0.002705] 8 disabled
[ 0.002705] 9 disabled
[ 0.003621] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003958] last_pfn = 0x39f00 max_arch_pfn = 0x400000000
[ 0.008248] esrt: Reserving ESRT space from 0x0000000034f05998 to 0x0000000034f059d0.
[ 0.008255] check: Scanning 1 areas for low memory corruption
[ 0.008257] Using GB pages for direct mapping
[ 0.008259] BRK [0x307e01000, 0x307e01fff] PGTABLE
[ 0.008260] BRK [0x307e02000, 0x307e02fff] PGTABLE
[ 0.008260] BRK [0x307e03000, 0x307e03fff] PGTABLE
[ 0.008276] BRK [0x307e04000, 0x307e04fff] PGTABLE
[ 0.008277] BRK [0x307e05000, 0x307e05fff] PGTABLE
[ 0.008337] BRK [0x307e06000, 0x307e06fff] PGTABLE
[ 0.008371] BRK [0x307e07000, 0x307e07fff] PGTABLE
[ 0.008383] BRK [0x307e08000, 0x307e08fff] PGTABLE
[ 0.008404] BRK [0x307e09000, 0x307e09fff] PGTABLE
[ 0.008424] BRK [0x307e0a000, 0x307e0afff] PGTABLE
[ 0.008451] Secure boot disabled
[ 0.008462] ACPI: Early table checksum verification disabled
[ 0.008464] ACPI: RSDP 0x00000000394E9000 000024 (v02 ALASKA)
[ 0.008466] ACPI: XSDT 0x00000000394E90A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008469] ACPI: FACP 0x0000000039529D98 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.008471] ACPI: DSDT 0x00000000394E9208 040B8D (v02 ALASKA A M I 01072009 INTL 20160527)
[ 0.008473] ACPI: FACS 0x00000000395B4080 000040
[ 0.008474] ACPI: APIC 0x0000000039529EB0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.008475] ACPI: FPDT 0x0000000039529FA8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008477] ACPI: FIDT 0x0000000039529FF0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008478] ACPI: MCFG 0x000000003952A090 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.008479] ACPI: SSDT 0x000000003952A0D0 000204 (v01 ALASKA A M I 00001000 INTL 20160527)
[ 0.008480] ACPI: SSDT 0x000000003952A2D8 0017D5 (v02 ALASKA A M I 00003000 INTL 20160527)
[ 0.008482] ACPI: SSDT 0x000000003952BAB0 00794B (v01 ALASKA A M I 00000001 INTL 20160527)
[ 0.008483] ACPI: SSDT 0x0000000039533400 0031C7 (v02 ALASKA A M I 00003000 INTL 20160527)
[ 0.008484] ACPI: HPET 0x00000000395365C8 000038 (v01 ALASKA A M I 00000002 01000013)
[ 0.008486] ACPI: SSDT 0x0000000039536600 000F9E (v02 ALASKA A M I 00001000 INTL 20160527)
[ 0.008487] ACPI: SSDT 0x00000000395375A0 002D1B (v02 ALASKA A M I 00000000 INTL 20160527)
[ 0.008488] ACPI: UEFI 0x000000003953A2C0 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.008489] ACPI: LPIT 0x000000003953A308 00005C (v01 ALASKA A M I 00000002 01000013)
[ 0.008491] ACPI: SSDT 0x000000003953A368 0027DE (v02 ALASKA A M I 00001000 INTL 20160527)
[ 0.008492] ACPI: SSDT 0x000000003953CB48 000FFE (v02 ALASKA A M I 00000000 INTL 20160527)
[ 0.008493] ACPI: DBGP 0x000000003953DB48 000034 (v01 ALASKA A M I 00000002 01000013)
[ 0.008494] ACPI: DBG2 0x000000003953DB80 000054 (v00 ALASKA A M I 00000002 01000013)
[ 0.008496] ACPI: DMAR 0x000000003953DBD8 0000A8 (v01 ALASKA A M I 00000002 01000013)
[ 0.008497] ACPI: BGRT 0x000000003953DC80 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008498] ACPI: WSMT 0x000000003953DCB8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.008502] ACPI: Local APIC address 0xfee00000
[ 0.008779] No NUMA configuration found
[ 0.008780] Faking a node at [mem 0x0000000000000000-0x00000004be7fffff]
[ 0.008782] NODE_DATA(0) allocated [mem 0x4be7fc000-0x4be7fffff]
[ 0.008792] Zone ranges:
[ 0.008792] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.008793] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.008794] Normal [mem 0x0000000100000000-0x00000004be7fffff]
[ 0.008794] Movable zone start for each node
[ 0.008795] Early memory node ranges
[ 0.008795] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.008796] node 0: [mem 0x0000000000100000-0x00000000303defff]
[ 0.008796] node 0: [mem 0x00000000303e1000-0x0000000038be2fff]
[ 0.008797] node 0: [mem 0x0000000039055000-0x00000000394cbfff]
[ 0.008797] node 0: [mem 0x0000000039eff000-0x0000000039efffff]
[ 0.008797] node 0: [mem 0x0000000100000000-0x00000004be7fffff]
[ 0.009035] Zeroed struct page in unavailable ranges: 28681 pages
[ 0.009036] Initmem setup node 0 [mem 0x0000000000001000-0x00000004be7fffff]
[ 0.009036] On node 0 totalpages: 4159479
[ 0.009037] DMA zone: 64 pages used for memmap
[ 0.009037] DMA zone: 22 pages reserved
[ 0.009038] DMA zone: 3998 pages, LIFO batch:0
[ 0.009087] DMA32 zone: 3586 pages used for memmap
[ 0.009088] DMA32 zone: 229465 pages, LIFO batch:63
[ 0.013657] Normal zone: 61344 pages used for memmap
[ 0.013658] Normal zone: 3926016 pages, LIFO batch:63
[ 0.059303] Reserving Intel graphics memory at [mem 0x3b800000-0x3f7fffff]
[ 0.059809] ACPI: PM-Timer IO Port: 0x1808
[ 0.059810] ACPI: Local APIC address 0xfee00000
[ 0.059813] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.059814] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.059814] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.059814] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.059815] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.059815] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.059816] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.059816] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.059816] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.059817] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.059817] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.059817] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.059885] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.059886] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.059887] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.059887] ACPI: IRQ0 used by override.
[ 0.059888] ACPI: IRQ9 used by override.
[ 0.059889] Using ACPI (MADT) for SMP configuration information
[ 0.059890] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.059891] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.059900] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.059901] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.059902] PM: Registered nosave memory: [mem 0x2e6e9000-0x2e6e9fff]
[ 0.059903] PM: Registered nosave memory: [mem 0x2e6f9000-0x2e6f9fff]
[ 0.059903] PM: Registered nosave memory: [mem 0x303df000-0x303dffff]
[ 0.059904] PM: Registered nosave memory: [mem 0x303e0000-0x303e0fff]
[ 0.059905] PM: Registered nosave memory: [mem 0x38be3000-0x39054fff]
[ 0.059905] PM: Registered nosave memory: [mem 0x394cc000-0x395b4fff]
[ 0.059906] PM: Registered nosave memory: [mem 0x395b5000-0x39efefff]
[ 0.059907] PM: Registered nosave memory: [mem 0x39f00000-0x3f7fffff]
[ 0.059907] PM: Registered nosave memory: [mem 0x3f800000-0xdfffffff]
[ 0.059907] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.059908] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.059908] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.059909] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.059909] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.059909] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.059910] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.059910] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.059910] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.059911] [mem 0x3f800000-0xdfffffff] available for PCI devices
[ 0.059913] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.119736] random: get_random_bytes called from start_kernel+0x8b/0x489 with crng_init=0
[ 0.119739] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:12 nr_node_ids:1
[ 0.119909] percpu: Embedded 43 pages/cpu s138136 r8192 d29800 u262144
[ 0.119913] pcpu-alloc: s138136 r8192 d29800 u262144 alloc=1*2097152
[ 0.119913] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.119924] Built 1 zonelists, mobility grouping on. Total pages: 4094463
[ 0.119925] Policy zone: Normal
[ 0.119926] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-lfs-SVN-20200401 root=/dev/nvme0n1p5
[ 0.121979] Calgary: detecting Calgary via BIOS EBDA area
[ 0.121980] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.143694] Memory: 16164032K/16637916K available (14340K kernel code, 1322K rwdata, 3124K rodata, 1264K init, 1320K bss, 473884K reserved, 0K cma-reserved)
[ 0.143730] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.143733] Kernel/User page tables isolation: enabled
[ 0.143787] rcu: Hierarchical RCU implementation.
[ 0.143787] rcu: RCU event tracing is enabled.
[ 0.143788] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=12.
[ 0.143789] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.143789] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.143895] NR_IRQS: 4352, nr_irqs: 2152, preallocated irqs: 16
[ 0.144355] Console: colour dummy device 80x25
[ 0.144460] printk: console [tty0] enabled
[ 0.144467] ACPI: Core revision 20190215
[ 0.144843] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.144913] hpet clockevent registered
[ 0.144985] APIC: Switch to symmetric I/O mode setup
[ 0.144986] Switched APIC routing to physical flat.
[ 0.154635] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.158935] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e02c4a121d, max_idle_ns: 440795236083 ns
[ 0.158943] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.00 BogoMIPS (lpj=3192000)
[ 0.158945] pid_max: default: 32768 minimum: 301
[ 0.160973] LSM: Security Framework initializing
[ 0.160978] SELinux: Initializing.
[ 0.160984] *** VALIDATE SELinux ***
[ 0.162633] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.163243] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.163266] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.163286] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.163352] *** VALIDATE proc ***
[ 0.163366] *** VALIDATE cgroup1 ***
[ 0.163367] *** VALIDATE cgroup2 ***
[ 0.163382] mce: CPU supports 12 MCE banks
[ 0.163389] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.163403] process: using mwait in idle threads
[ 0.163405] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.163406] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.163407] Spectre V2 : Mitigation: Full generic retpoline
[ 0.163408] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.163409] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.163413] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.163414] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.163415] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.163584] Freeing SMP alternatives memory: 40K
[ 0.163848] TSC deadline timer enabled
[ 0.163860] smpboot: CPU0: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.163899] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.163918] ... version: 4
[ 0.163919] ... bit width: 48
[ 0.163920] ... generic registers: 4
[ 0.163921] ... value mask: 0000ffffffffffff
[ 0.163921] ... max period: 00007fffffffffff
[ 0.163922] ... fixed-purpose events: 3
[ 0.163923] ... event mask: 000000070000000f
[ 0.163937] rcu: Hierarchical SRCU implementation.
[ 0.163937] smp: Bringing up secondary CPUs ...
[ 0.163937] x86: Booting SMP configuration:
[ 0.163937] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.168413] smp: Brought up 1 node, 12 CPUs
[ 0.168413] smpboot: Max logical packages: 1
[ 0.168413] smpboot: Total of 12 processors activated (76608.00 BogoMIPS)
[ 0.169189] devtmpfs: initialized
[ 0.169189] PM: Registering ACPI NVS region [mem 0x303df000-0x303dffff] (4096 bytes)
[ 0.169189] PM: Registering ACPI NVS region [mem 0x394cc000-0x395b4fff] (954368 bytes)
[ 0.169189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.169189] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.169189] kworker/u24:0 (71) used greatest stack depth: 14632 bytes left
[ 0.169270] PM: RTC time: 06:37:56, date: 2020-05-08
[ 0.169312] NET: Registered protocol family 16
[ 0.169352] audit: initializing netlink subsys (disabled)
[ 0.169356] audit: type=2000 audit(1588919876.025:1): state=initialized audit_enabled=0 res=1
[ 0.169356] kworker/u24:0 (74) used greatest stack depth: 14168 bytes left
[ 0.169356] cpuidle: using governor menu
[ 0.169356] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.169356] ACPI: bus type PCI registered
[ 0.169356] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.169356] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.169356] PCI: Using configuration type 1 for base access
[ 0.170958] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.170971] ACPI: Added _OSI(Module Device)
[ 0.170972] ACPI: Added _OSI(Processor Device)
[ 0.170973] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.170974] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.170975] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.170976] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.170977] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.199923] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.722043] ACPI: Dynamic OEM Table Load:
[ 0.722048] ACPI: SSDT 0xFFFF96BAAB7F1800 000708 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.722321] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.723001] ACPI: Dynamic OEM Table Load:
[ 0.723005] ACPI: SSDT 0xFFFF96BAAB011800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.723234] ACPI: Dynamic OEM Table Load:
[ 0.723237] ACPI: SSDT 0xFFFF96BAABDF1C00 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.723440] ACPI: Dynamic OEM Table Load:
[ 0.723443] ACPI: SSDT 0xFFFF96BAAB7F2000 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.723804] ACPI: Dynamic OEM Table Load:
[ 0.723809] ACPI: SSDT 0xFFFF96BAAB7E5000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.724317] ACPI: Dynamic OEM Table Load:
[ 0.724320] ACPI: SSDT 0xFFFF96BAAB012400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.724557] ACPI: Dynamic OEM Table Load:
[ 0.724560] ACPI: SSDT 0xFFFF96BAAB012800 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.726998] ACPI: Interpreter enabled
[ 0.727016] ACPI: (supports S0 S3 S4 S5)
[ 0.727018] ACPI: Using IOAPIC for interrupt routing
[ 0.727038] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.727587] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.732525] ACPI: Power Resource [WRST] (on)
[ 0.732568] ACPI: Power Resource [DRST] (on)
[ 0.734273] ACPI: Power Resource [USBC] (on)
[ 0.736054] ACPI: Power Resource [V0PR] (on)
[ 0.736159] ACPI: Power Resource [V1PR] (on)
[ 0.736258] ACPI: Power Resource [V2PR] (on)
[ 0.738961] ACPI: Power Resource [WRST] (on)
[ 0.741250] ACPI: Power Resource [FN00] (off)
[ 0.741299] ACPI: Power Resource [FN01] (off)
[ 0.741347] ACPI: Power Resource [FN02] (off)
[ 0.741395] ACPI: Power Resource [FN03] (off)
[ 0.741443] ACPI: Power Resource [FN04] (off)
[ 0.741812] ACPI: Power Resource [PIN] (off)
[ 0.742076] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.742080] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.742159] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.742230] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.742231] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.742347] PCI host bridge to bus 0000:00
[ 0.742350] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.742352] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.742354] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.742355] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.742356] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.742357] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.742358] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.742359] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.742361] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.742362] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.742363] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.742364] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.742365] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.742366] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.742367] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.742369] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xdfffffff window]
[ 0.742370] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.742371] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.742376] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[ 0.742561] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[ 0.742568] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x50ffffff 64bit]
[ 0.742571] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.742574] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.742582] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.742819] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.742861] pci 0000:00:12.0: reg 0x10: [mem 0x5133d000-0x5133dfff 64bit]
[ 0.743131] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.743174] pci 0000:00:14.0: reg 0x10: [mem 0x51320000-0x5132ffff 64bit]
[ 0.743305] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.743435] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.743470] pci 0000:00:14.2: reg 0x10: [mem 0x51336000-0x51337fff 64bit]
[ 0.743488] pci 0000:00:14.2: reg 0x18: [mem 0x5133c000-0x5133cfff 64bit]
[ 0.743681] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.743720] pci 0000:00:16.0: reg 0x10: [mem 0x5133b000-0x5133bfff 64bit]
[ 0.743832] pci 0000:00:16.0: PME# supported from D3hot
[ 0.744017] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[ 0.744052] pci 0000:00:17.0: reg 0x10: [mem 0x51334000-0x51335fff]
[ 0.744066] pci 0000:00:17.0: reg 0x14: [mem 0x5133a000-0x5133a0ff]
[ 0.744080] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
[ 0.744094] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
[ 0.744108] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
[ 0.744122] pci 0000:00:17.0: reg 0x24: [mem 0x51339000-0x513397ff]
[ 0.744200] pci 0000:00:17.0: PME# supported from D3hot
[ 0.744353] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.744519] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.744655] pci 0000:00:1b.2: [8086:a342] type 01 class 0x060400
[ 0.744836] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
[ 0.744976] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[ 0.745156] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[ 0.745319] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[ 0.745490] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.745688] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.745858] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.746055] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[ 0.746290] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.746367] pci 0000:00:1f.3: reg 0x10: [mem 0x51330000-0x51333fff 64bit]
[ 0.746441] pci 0000:00:1f.3: reg 0x20: [mem 0x51000000-0x510fffff 64bit]
[ 0.746588] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.746801] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.746948] pci 0000:00:1f.4: reg 0x10: [mem 0x51338000-0x513380ff 64bit]
[ 0.747102] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.747362] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.747387] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.747556] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[ 0.747614] pci 0000:00:1f.6: reg 0x10: [mem 0x51300000-0x5131ffff]
[ 0.747853] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.747994] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.748100] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 0.748176] pci 0000:02:00.0: reg 0x10: [mem 0x51200000-0x51201fff 64bit]
[ 0.748450] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.748624] pci 0000:00:1b.2: PCI bridge to [bus 02]
[ 0.748633] pci 0000:00:1b.2: bridge window [mem 0x51200000-0x512fffff]
[ 0.748714] pci 0000:03:00.0: [144d:a808] type 00 class 0x010802
[ 0.748763] pci 0000:03:00.0: reg 0x10: [mem 0x51100000-0x51103fff 64bit]
[ 0.749070] pci 0000:00:1b.4: PCI bridge to [bus 03]
[ 0.749079] pci 0000:00:1b.4: bridge window [mem 0x51100000-0x511fffff]
[ 0.749150] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.749231] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.750187] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.750203] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.750218] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.750232] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.750247] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.750261] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.750276] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.750290] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.750613] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.750613] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.750613] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.750613] vgaarb: loaded
[ 0.750613] SCSI subsystem initialized
[ 0.750613] libata version 3.00 loaded.
[ 0.750613] ACPI: bus type USB registered
[ 0.750613] usbcore: registered new interface driver usbfs
[ 0.750613] usbcore: registered new interface driver hub
[ 0.750613] usbcore: registered new device driver usb
[ 0.750613] pps_core: LinuxPPS API ver. 1 registered
[ 0.750613] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.750613] PTP clock support registered
[ 0.750613] EDAC MC: Ver: 3.0.0
[ 0.750949] Registered efivars operations
[ 0.771163] Advanced Linux Sound Architecture Driver Initialized.
[ 0.771163] PCI: Using ACPI for IRQ routing
[ 0.856694] PCI: pci_cache_line_size set to 64 bytes
[ 0.856807] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.856808] e820: reserve RAM buffer [mem 0x2e6e9018-0x2fffffff]
[ 0.856808] e820: reserve RAM buffer [mem 0x303df000-0x33ffffff]
[ 0.856809] e820: reserve RAM buffer [mem 0x38be3000-0x3bffffff]
[ 0.856809] e820: reserve RAM buffer [mem 0x394cc000-0x3bffffff]
[ 0.856810] e820: reserve RAM buffer [mem 0x39f00000-0x3bffffff]
[ 0.856810] e820: reserve RAM buffer [mem 0x4be800000-0x4bfffffff]
[ 0.856943] NetLabel: Initializing
[ 0.856943] NetLabel: domain hash size = 128
[ 0.856943] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.856943] NetLabel: unlabeled traffic allowed by default
[ 0.856993] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.856996] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.858950] clocksource: Switched to clocksource tsc-early
[ 0.895206] VFS: Disk quotas dquot_6.6.0
[ 0.895214] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.895224] *** VALIDATE hugetlbfs ***
[ 0.895235] pnp: PnP ACPI init
[ 0.895347] system 00:00: [io 0x0a00-0x0a2f] has been reserved
[ 0.895349] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.895350] system 00:00: [io 0x0a40-0x0a4f] has been reserved
[ 0.895353] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.895793] pnp 00:01: [dma 0 disabled]
[ 0.895813] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.895861] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.895863] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.895866] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.895874] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.895914] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.895917] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.896001] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.896003] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.896004] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.896005] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.896006] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.896007] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.896009] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.896010] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.896013] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.896105] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.896106] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.896108] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.896109] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.896110] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.896112] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.896113] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.896116] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.896237] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.896240] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.896670] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.896986] pnp: PnP ACPI: found 9 devices
[ 0.902113] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.902118] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.902119] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.902120] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[ 0.902125] pci 0000:00:1d.0: BAR 8: assigned [mem 0x3f800000-0x3f9fffff]
[ 0.902130] pci 0000:00:1d.0: BAR 9: assigned [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.902132] pci 0000:00:1d.0: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.902134] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.902156] pci 0000:00:1b.2: PCI bridge to [bus 02]
[ 0.902163] pci 0000:00:1b.2: bridge window [mem 0x51200000-0x512fffff]
[ 0.902176] pci 0000:00:1b.4: PCI bridge to [bus 03]
[ 0.902182] pci 0000:00:1b.4: bridge window [mem 0x51100000-0x511fffff]
[ 0.902195] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.902214] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.902219] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
[ 0.902226] pci 0000:00:1d.0: bridge window [mem 0x3f800000-0x3f9fffff]
[ 0.902231] pci 0000:00:1d.0: bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.902240] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.902241] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.902241] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.902242] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.902242] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.902243] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.902243] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.902244] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.902244] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.902245] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.902245] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.902246] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.902246] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.902247] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.902247] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.902247] pci_bus 0000:00: resource 19 [mem 0x3f800000-0xdfffffff window]
[ 0.902248] pci_bus 0000:00: resource 20 [mem 0xfc800000-0xfe7fffff window]
[ 0.902249] pci_bus 0000:02: resource 1 [mem 0x51200000-0x512fffff]
[ 0.902249] pci_bus 0000:03: resource 1 [mem 0x51100000-0x511fffff]
[ 0.902250] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.902250] pci_bus 0000:05: resource 1 [mem 0x3f800000-0x3f9fffff]
[ 0.902251] pci_bus 0000:05: resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.902323] NET: Registered protocol family 2
[ 0.902388] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.902415] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.902509] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.902576] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.902596] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.902618] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.902656] NET: Registered protocol family 1
[ 0.902697] RPC: Registered named UNIX socket transport module.
[ 0.902698] RPC: Registered udp transport module.
[ 0.902699] RPC: Registered tcp transport module.
[ 0.902699] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.902743] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.902960] PCI: CLS 64 bytes, default 64
[ 0.902978] DMAR: Host address width 39
[ 0.902980] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.902985] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.902987] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.902990] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.902991] DMAR: RMRR base: 0x000000399d4000 end: 0x00000039c1dfff
[ 0.902992] DMAR: RMRR base: 0x0000003b000000 end: 0x0000003f7fffff
[ 0.902998] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.902999] software IO TLB: mapped [mem 0x2a6e9000-0x2e6e9000] (64MB)
[ 0.903047] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 0.903049] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.903049] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.903050] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.903051] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.903052] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 0.903168] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c4a121d, max_idle_ns: 440795236083 ns
[ 0.903177] clocksource: Switched to clocksource tsc
[ 0.903582] check: Scanning for low memory corruption every 60 seconds
[ 0.903957] Initialise system trusted keyrings
[ 0.903976] workingset: timestamp_bits=56 max_order=22 bucket_order=0
[ 0.905116] NFS: Registering the id_resolver key type
[ 0.905120] Key type id_resolver registered
[ 0.905121] Key type id_legacy registered
[ 0.905457] kworker/u24:4 (1187) used greatest stack depth: 14112 bytes left
[ 0.905908] Key type asymmetric registered
[ 0.905909] Asymmetric key parser 'x509' registered
[ 0.905913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.905915] io scheduler mq-deadline registered
[ 0.905917] io scheduler kyber registered
[ 0.906268] aer 0000:00:1b.2:pcie002: AER enabled with IRQ 121
[ 0.906504] aer 0000:00:1b.4:pcie002: AER enabled with IRQ 122
[ 0.906823] efifb: probing for efifb
[ 0.906830] efifb: framebuffer at 0x40000000, using 3072k, total 3072k
[ 0.906831] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.906832] efifb: scrolling: redraw
[ 0.906832] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.907660] Console: switching to colour frame buffer device 128x48
[ 0.908477] fb0: EFI VGA frame buffer device
[ 0.908586] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.908607] ACPI: Sleep Button [SLPB]
[ 0.908631] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.908651] ACPI: Power Button [PWRB]
[ 0.908673] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.908694] ACPI: Power Button [PWRF]
[ 0.939257] Monitor-Mwait will be used to enter C-1 state
[ 0.939261] Monitor-Mwait will be used to enter C-2 state
[ 0.939264] Monitor-Mwait will be used to enter C-3 state
[ 4.016088] ACPI: Invalid passive threshold
[ 6.064074] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.064085] ACPI: Thermal Zone [TZ10] (17 C)
[ 6.094144] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.094154] ACPI: Thermal Zone [TZ00] (28 C)
[ 6.094259] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.115173] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 6.115778] Non-volatile memory driver v1.3
[ 6.115796] Linux agpgart interface v0.103
[ 6.116391] checking generic (40000000 300000) vs hw (40000000 10000000)
[ 6.116391] fb0: switching to inteldrmfb from EFI VGA
[ 6.116407] Console: switching to colour dummy device 80x25
[ 6.116439] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 6.117394] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.117395] [drm] Driver supports precise vblank timestamp query.
[ 6.117810] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.117829] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
[ 6.117831] i915 0000:00:02.0: Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
[ 6.117832] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[ 6.389633] [drm] failed to retrieve link info, disabling eDP
[ 6.405288] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
[ 6.406312] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.406455] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 6.408514] loop: module loaded
[ 6.408703] nvme nvme0: pci function 0000:03:00.0
[ 6.408721] ahci 0000:00:17.0: version 3.0
[ 6.410922] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 6.410924] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst
[ 6.426443] scsi host0: ahci
[ 6.426505] scsi host1: ahci
[ 6.426553] scsi host2: ahci
[ 6.426605] scsi host3: ahci
[ 6.426649] scsi host4: ahci
[ 6.426692] scsi host5: ahci
[ 6.426726] ata1: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339100 irq 127
[ 6.426730] ata2: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339180 irq 127
[ 6.426732] ata3: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339200 irq 127
[ 6.426735] ata4: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339280 irq 127
[ 6.426738] ata5: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339300 irq 127
[ 6.426741] ata6: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339380 irq 127
[ 6.426802] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.426803] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.426808] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.426809] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.426815] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 6.426816] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.427017] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.445671] fbcon: inteldrmfb (fb0) is primary device
[ 6.490789] Console: switching to colour frame buffer device 320x90
[ 6.507371] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.520508] random: fast init done
[ 6.624805] nvme nvme0: missing or invalid SUBNQN field.
[ 6.624827] nvme nvme0: Shutdown timeout set to 8 seconds
[ 6.639554] nvme nvme0: 12/0/0 default/read/poll queues
[ 6.645703] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 6.648167] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 6.732249] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b4:2e:99:42:d4:53
[ 6.732264] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 6.732467] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[ 6.732489] sky2: driver version 1.30
[ 6.732636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.732668] ehci-pci: EHCI PCI platform driver
[ 6.732685] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.732699] ohci-pci: OHCI PCI platform driver
[ 6.732713] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.732841] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.732870] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 6.734021] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 6.734046] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.734183] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 6.734198] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.734211] usb usb1: Product: xHCI Host Controller
[ 6.734220] usb usb1: Manufacturer: Linux 5.1.0 xhci-hcd
[ 6.734230] usb usb1: SerialNumber: 0000:00:14.0
[ 6.734334] hub 1-0:1.0: USB hub found
[ 6.734359] hub 1-0:1.0: 16 ports detected
[ 6.734875] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.734910] ata4: SATA link down (SStatus 4 SControl 300)
[ 6.734953] ata2: SATA link down (SStatus 4 SControl 300)
[ 6.734990] ata3: SATA link down (SStatus 4 SControl 300)
[ 6.735045] ata1: SATA link down (SStatus 4 SControl 300)
[ 6.735086] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.735232] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.735309] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 6.735327] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 6.735359] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[ 6.735374] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.735387] usb usb2: Product: xHCI Host Controller
[ 6.735396] usb usb2: Manufacturer: Linux 5.1.0 xhci-hcd
[ 6.735406] usb usb2: SerialNumber: 0000:00:14.0
[ 6.735519] ata5.00: ATA-10: WDC WD40EZRZ-00GXCB0, 80.00A80, max UDMA/133
[ 6.735525] hub 2-0:1.0: USB hub found
[ 6.735534] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 6.735553] hub 2-0:1.0: 10 ports detected
[ 6.736297] usbcore: registered new interface driver usblp
[ 6.736299] ata5.00: configured for UDMA/133
[ 6.736315] usbcore: registered new interface driver usb-storage
[ 6.736330] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LW00, max UDMA/133
[ 6.736347] i8042: PNP: No PS/2 controller found.
[ 6.736377] scsi 4:0:0:0: Direct-Access ATA WDC WD40EZRZ-00G 0A80 PQ: 0 ANSI: 5
[ 6.736465] mousedev: PS/2 mouse device common for all mice
[ 6.736499] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 6.736545] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 6.736560] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 6.736573] rtc_cmos 00:03: RTC can wake from S4
[ 6.736577] sd 4:0:0:0: [sda] Write Protect is off
[ 6.736594] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.736607] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.737630] rtc_cmos 00:03: registered as rtc0
[ 6.737647] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 6.737783] ata6.00: configured for UDMA/133
[ 6.738551] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 6.740084] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 6.742174] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 6.742996] intel_pstate: Intel P-state driver initializing
[ 6.743625] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LW00 PQ: 0 ANSI: 5
[ 6.744623] intel_pstate: HWP enabled
[ 6.745386] EFI Variables Facility v0.08 2004-May-17
[ 6.769163] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.770004] usbcore: registered new interface driver usbhid
[ 6.770766] usbhid: USB HID core driver
[ 6.771609] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.772450] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffb6a8bd80)
[ 6.773482] Initializing XFRM netlink socket
[ 6.774273] NET: Registered protocol family 10
[ 6.775104] Segment Routing with IPv6
[ 6.775893] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 6.776693] NET: Registered protocol family 17
[ 6.777431] Key type dns_resolver registered
[ 6.778617] microcode: sig=0x906ea, pf=0x2, revision=0xaa
[ 6.779406] microcode: Microcode Update Driver: v2.2.
[ 6.779410] sched_clock: Marking stable (6779807040, -403760)->(6789504703, -10101423)
[ 6.781015] registered taskstats version 1
[ 6.781736] Loading compiled-in X.509 certificates
[ 6.783072] PM: Magic number: 4:808:619
[ 6.783690] sda: sda1
[ 6.784511] printk: console [netcon0] enabled
[ 6.784665] sd 4:0:0:0: [sda] Attached SCSI disk
[ 6.785227] netconsole: network logging started
[ 6.785253] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.787647] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.788376] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.788981] ALSA device list:
[ 6.789102] cfg80211: failed to load regulatory.db
[ 6.789824] No soundcards found.
[ 6.793916] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.794653] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.795529] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 6.795603] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 6.796391] md: Waiting for all devices to be available before autodetect
[ 6.797127] md: If you don't use raid, use raid=noautodetect
[ 6.797805] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.798600] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.799353] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.800119] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.800836] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 6.801590] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.802338] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.803080] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.803775] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.821679] md: Autodetecting RAID arrays.
[ 6.821738] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 6.822415] md: autorun ...
[ 6.823144] snd_hda_codec_generic hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.823145] snd_hda_codec_generic hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.823867] md: ... autorun DONE.
[ 6.824602] snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0
[ 6.826830] snd_hda_codec_generic hdaudioC0D2: dig-out=0x3/0x0
[ 6.827579] snd_hda_codec_generic hdaudioC0D2: inputs:
[ 6.828291] EXT4-fs (nvme0n1p5): INFO: recovery required on readonly filesystem
[ 6.829068] EXT4-fs (nvme0n1p5): write access will be enabled during recovery
[ 6.829193] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 6.830595] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 6.831375] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 6.832152] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 6.832929] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 6.833714] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 6.834500] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 6.835277] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 6.836053] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 6.847955] EXT4-fs (nvme0n1p5): recovery complete
[ 6.852490] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.853263] VFS: Mounted root (ext4 filesystem) readonly on device 259:5.
[ 6.854227] devtmpfs: mounted
[ 6.855292] Freeing unused kernel image memory: 1264K
[ 6.863107] Write protecting the kernel read-only data: 20480k
[ 6.864306] Freeing unused kernel image memory: 2008K
[ 6.865291] Freeing unused kernel image memory: 972K
[ 6.866086] Run /sbin/init as init process
[ 6.881808] stty (1755) used greatest stack depth: 13664 bytes left
[ 6.950954] ip (1807) used greatest stack depth: 12792 bytes left
[ 7.004188] udevd[1832]: starting version 3.2.9
[ 7.006497] random: udevd: uninitialized urandom read (16 bytes read)
[ 7.006658] random: udevd: uninitialized urandom read (16 bytes read)
[ 7.006677] random: udevd: uninitialized urandom read (16 bytes read)
[ 7.010244] udevd[1832]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/40-libsane.rules'
[ 7.039522] udevd[1832]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules'
[ 7.043938] udevd[1833]: starting eudev-3.2.9
[ 7.049407] udevd[1833]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/40-libsane.rules'
[ 7.057996] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[ 7.063674] udevd[1833]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules'
[ 7.102366] random: crng init done
[ 7.102367] random: 7 urandom warning(s) missed due to ratelimiting
[ 7.102719] e1000e 0000:00:1f.6 eth1: renamed from eth0
[ 7.103419] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 7.105507] Intel(R) Wireless WiFi driver for Linux
[ 7.105507] Copyright(c) 2003- 2015 Intel Corporation
[ 7.105539] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 7.108483] iwlwifi 0000:02:00.0: loaded firmware version 36.9f0a2d68.0 op_mode iwlmvm
[ 7.113312] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[ 7.187104] iwlwifi 0000:02:00.0: base HW address: 28:16:ad:ae:bf:96
[ 7.191449] usb 1-5: New USB device found, idVendor=045e, idProduct=0752, bcdDevice= 1.10
[ 7.191453] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.191457] usb 1-5: Product: Wired Keyboard 400
[ 7.191459] usb 1-5: Manufacturer: Microsoft
[ 7.196319] input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:045E:0752.0001/input/input14
[ 7.248309] hid-generic 0003:045E:0752.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:14.0-5/input0
[ 7.259525] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.260231] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 7.265884] iwlwifi 0000:02:00.0 wlan1: renamed from wlan0
[ 7.362022] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[ 7.492232] usb 1-6: New USB device found, idVendor=045e, idProduct=0084, bcdDevice= 1.04
[ 7.492236] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.492239] usb 1-6: Product: Microsoft Basic Optical Mouse
[ 7.492242] usb 1-6: Manufacturer: Microsoft
[ 7.496531] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0084.0002/input/input15
[ 7.496939] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on usb-0000:00:14.0-6/input0
[ 7.611019] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[ 7.738232] usb 1-12: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[ 7.738237] usb 1-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.758468] Bluetooth: Core ver 2.22
[ 7.758475] NET: Registered protocol family 31
[ 7.758475] Bluetooth: HCI device and connection manager initialized
[ 7.758477] Bluetooth: HCI socket layer initialized
[ 7.758478] Bluetooth: L2CAP socket layer initialized
[ 7.758479] Bluetooth: SCO socket layer initialized
[ 7.760213] usbcore: registered new interface driver btusb
[ 7.760700] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 7.767845] Bluetooth: hci0: Device revision is 5
[ 7.767845] Bluetooth: hci0: Secure boot is enabled
[ 7.767846] Bluetooth: hci0: OTP lock is enabled
[ 7.767846] Bluetooth: hci0: API lock is enabled
[ 7.767846] Bluetooth: hci0: Debug lock is disabled
[ 7.767847] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 7.767855] bluetooth hci0: Direct firmware load for intel/ibt-11-5.sfi failed with error -2
[ 7.767856] Bluetooth: hci0: Failed to load Intel firmware file (-2)
[ 7.905850] Adding 8391680k swap on /dev/nvme0n1p9. Priority:-2 extents:1 across:8391680k SS
[ 7.914234] EXT4-fs (nvme0n1p5): re-mounted. Opts: (null)
[ 10.080599] EXT4-fs (nvme0n1p5): re-mounted. Opts: (null)
[ 10.090875] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
[ 10.133695] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.138426] iwlwifi 0000:02:00.0: BIOS contains WGDS but no WRDS
[ 12.139713] ip (3952) used greatest stack depth: 11608 bytes left
[ 15.679664] wlan1: authenticate with 7c:ff:4d:08:df:22
[ 15.687950] wlan1: send auth to 7c:ff:4d:08:df:22 (try 1/3)
[ 15.695757] wlan1: authenticated
[ 15.697003] wlan1: associate with 7c:ff:4d:08:df:22 (try 1/3)
[ 15.703190] wlan1: RX AssocResp from 7c:ff:4d:08:df:22 (capab=0x431 status=0 aid=3)
[ 15.708360] wlan1: associated
[ 15.747001] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 36.159769] elogind-daemon[4254]: New seat seat0.
[ 36.160356] elogind-daemon[4254]: Watching system buttons on /dev/input/event2 (Power Button)
[ 36.179105] elogind-daemon[4254]: Watching system buttons on /dev/input/event1 (Power Button)
[ 36.179150] elogind-daemon[4254]: Watching system buttons on /dev/input/event0 (Sleep Button)
[ 36.179235] elogind-daemon[4254]: Watching system buttons on /dev/input/event14 (Microsoft Wired Keyboard 400)
[10101.957585] TCP: wlan1: Driver has suspect GRO implementation, TCP performance may be compromised.
[-- Attachment #3: dmesg-5.6.4 --]
[-- Type: application/octet-stream, Size: 60735 bytes --]
[ 0.000000] Linux version 5.6.4 (steve@strobe-jhalfs) (gcc version 9.3.0 (GCC)) #2 SMP Sun Apr 26 22:28:51 CEST 2020
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.6.4-lfs-SVN-20200401 root=/dev/nvme0n1p5
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000303defff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000303df000-0x00000000303dffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000303e0000-0x00000000303e0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000303e1000-0x0000000038be2fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000038be3000-0x0000000039054fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000039055000-0x00000000394cbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000394cc000-0x00000000395b4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000395b5000-0x0000000039efefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000039eff000-0x0000000039efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000039f00000-0x000000003f7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004be7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x2e6e9018-0x2e6f9e57] usable ==> usable
[ 0.000000] e820: update [mem 0x2e6e9018-0x2e6f9e57] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000002e6e9017] usable
[ 0.000000] reserve setup_data: [mem 0x000000002e6e9018-0x000000002e6f9e57] usable
[ 0.000000] reserve setup_data: [mem 0x000000002e6f9e58-0x00000000303defff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000303df000-0x00000000303dffff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000303e0000-0x00000000303e0fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000303e1000-0x0000000038be2fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000038be3000-0x0000000039054fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000039055000-0x00000000394cbfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000394cc000-0x00000000395b4fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000395b5000-0x0000000039efefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000039eff000-0x0000000039efffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000039f00000-0x000000003f7fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000004be7fffff] usable
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x394e9000 ACPI=0x394e9000 SMBIOS=0x39c41000 SMBIOS 3.0=0x39c40000 ESRT=0x35540518 MEMATTR=0x37179018 RNG=0x39c6d698
[ 0.000000] efi: seeding entropy pool
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z390 M GAMING/Z390 M GAMING-CF, BIOS F5 03/14/2019
[ 0.000000] tsc: Detected 3200.000 MHz processor
[ 0.001836] tsc: Detected 3199.980 MHz TSC
[ 0.001836] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001837] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001840] last_pfn = 0x4be800 max_arch_pfn = 0x400000000
[ 0.001842] MTRR default type: write-back
[ 0.001842] MTRR fixed ranges enabled:
[ 0.001843] 00000-9FFFF write-back
[ 0.001843] A0000-BFFFF uncachable
[ 0.001843] C0000-FFFFF write-protect
[ 0.001844] MTRR variable ranges enabled:
[ 0.001844] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.001845] 1 base 0040000000 mask 7FC0000000 uncachable
[ 0.001845] 2 base 003C000000 mask 7FFC000000 uncachable
[ 0.001845] 3 base 003B000000 mask 7FFF000000 uncachable
[ 0.001846] 4 disabled
[ 0.001846] 5 disabled
[ 0.001846] 6 disabled
[ 0.001846] 7 disabled
[ 0.001846] 8 disabled
[ 0.001846] 9 disabled
[ 0.002135] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002466] last_pfn = 0x39f00 max_arch_pfn = 0x400000000
[ 0.006492] esrt: Reserving ESRT space from 0x0000000035540518 to 0x0000000035540550.
[ 0.006494] e820: update [mem 0x35540000-0x35540fff] usable ==> reserved
[ 0.006501] check: Scanning 1 areas for low memory corruption
[ 0.006503] Using GB pages for direct mapping
[ 0.006504] BRK [0x1f7801000, 0x1f7801fff] PGTABLE
[ 0.006505] BRK [0x1f7802000, 0x1f7802fff] PGTABLE
[ 0.006505] BRK [0x1f7803000, 0x1f7803fff] PGTABLE
[ 0.006528] BRK [0x1f7804000, 0x1f7804fff] PGTABLE
[ 0.006529] BRK [0x1f7805000, 0x1f7805fff] PGTABLE
[ 0.006626] BRK [0x1f7806000, 0x1f7806fff] PGTABLE
[ 0.006681] BRK [0x1f7807000, 0x1f7807fff] PGTABLE
[ 0.006701] BRK [0x1f7808000, 0x1f7808fff] PGTABLE
[ 0.006735] BRK [0x1f7809000, 0x1f7809fff] PGTABLE
[ 0.006763] BRK [0x1f780a000, 0x1f780afff] PGTABLE
[ 0.006804] Secure boot disabled
[ 0.006814] ACPI: Early table checksum verification disabled
[ 0.006816] ACPI: RSDP 0x00000000394E9000 000024 (v02 ALASKA)
[ 0.006818] ACPI: XSDT 0x00000000394E90A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006821] ACPI: FACP 0x0000000039529D98 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.006823] ACPI: DSDT 0x00000000394E9208 040B8D (v02 ALASKA A M I 01072009 INTL 20160527)
[ 0.006825] ACPI: FACS 0x00000000395B4080 000040
[ 0.006826] ACPI: APIC 0x0000000039529EB0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.006827] ACPI: FPDT 0x0000000039529FA8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006829] ACPI: FIDT 0x0000000039529FF0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006830] ACPI: MCFG 0x000000003952A090 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.006831] ACPI: SSDT 0x000000003952A0D0 000204 (v01 ALASKA A M I 00001000 INTL 20160527)
[ 0.006833] ACPI: SSDT 0x000000003952A2D8 0017D5 (v02 ALASKA A M I 00003000 INTL 20160527)
[ 0.006834] ACPI: SSDT 0x000000003952BAB0 00794B (v01 ALASKA A M I 00000001 INTL 20160527)
[ 0.006835] ACPI: SSDT 0x0000000039533400 0031C7 (v02 ALASKA A M I 00003000 INTL 20160527)
[ 0.006837] ACPI: HPET 0x00000000395365C8 000038 (v01 ALASKA A M I 00000002 01000013)
[ 0.006838] ACPI: SSDT 0x0000000039536600 000F9E (v02 ALASKA A M I 00001000 INTL 20160527)
[ 0.006839] ACPI: SSDT 0x00000000395375A0 002D1B (v02 ALASKA A M I 00000000 INTL 20160527)
[ 0.006840] ACPI: UEFI 0x000000003953A2C0 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.006842] ACPI: LPIT 0x000000003953A308 00005C (v01 ALASKA A M I 00000002 01000013)
[ 0.006843] ACPI: SSDT 0x000000003953A368 0027DE (v02 ALASKA A M I 00001000 INTL 20160527)
[ 0.006844] ACPI: SSDT 0x000000003953CB48 000FFE (v02 ALASKA A M I 00000000 INTL 20160527)
[ 0.006846] ACPI: DBGP 0x000000003953DB48 000034 (v01 ALASKA A M I 00000002 01000013)
[ 0.006847] ACPI: DBG2 0x000000003953DB80 000054 (v00 ALASKA A M I 00000002 01000013)
[ 0.006848] ACPI: DMAR 0x000000003953DBD8 0000A8 (v01 ALASKA A M I 00000002 01000013)
[ 0.006849] ACPI: BGRT 0x000000003953DC80 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006851] ACPI: WSMT 0x000000003953DCB8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006854] ACPI: Local APIC address 0xfee00000
[ 0.007129] No NUMA configuration found
[ 0.007130] Faking a node at [mem 0x0000000000000000-0x00000004be7fffff]
[ 0.007132] NODE_DATA(0) allocated [mem 0x4be7fc000-0x4be7fffff]
[ 0.007141] Zone ranges:
[ 0.007141] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007142] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007143] Normal [mem 0x0000000100000000-0x00000004be7fffff]
[ 0.007143] Movable zone start for each node
[ 0.007144] Early memory node ranges
[ 0.007144] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.007145] node 0: [mem 0x0000000000100000-0x00000000303defff]
[ 0.007146] node 0: [mem 0x00000000303e1000-0x0000000038be2fff]
[ 0.007146] node 0: [mem 0x0000000039055000-0x00000000394cbfff]
[ 0.007146] node 0: [mem 0x0000000039eff000-0x0000000039efffff]
[ 0.007147] node 0: [mem 0x0000000100000000-0x00000004be7fffff]
[ 0.007321] Zeroed struct page in unavailable ranges: 34825 pages
[ 0.007321] Initmem setup node 0 [mem 0x0000000000001000-0x00000004be7fffff]
[ 0.007322] On node 0 totalpages: 4159479
[ 0.007323] DMA zone: 64 pages used for memmap
[ 0.007323] DMA zone: 22 pages reserved
[ 0.007323] DMA zone: 3998 pages, LIFO batch:0
[ 0.007347] DMA32 zone: 3586 pages used for memmap
[ 0.007347] DMA32 zone: 229465 pages, LIFO batch:63
[ 0.008878] Normal zone: 61344 pages used for memmap
[ 0.008879] Normal zone: 3926016 pages, LIFO batch:63
[ 0.030158] Reserving Intel graphics memory at [mem 0x3b800000-0x3f7fffff]
[ 0.030662] ACPI: PM-Timer IO Port: 0x1808
[ 0.030663] ACPI: Local APIC address 0xfee00000
[ 0.030666] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.030666] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.030667] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.030667] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.030668] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.030668] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.030668] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.030669] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.030669] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.030670] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.030670] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.030670] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.030737] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.030739] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.030740] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.030740] ACPI: IRQ0 used by override.
[ 0.030741] ACPI: IRQ9 used by override.
[ 0.030742] Using ACPI (MADT) for SMP configuration information
[ 0.030742] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.030744] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.030752] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.030753] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.030754] PM: hibernation: Registered nosave memory: [mem 0x2e6e9000-0x2e6e9fff]
[ 0.030754] PM: hibernation: Registered nosave memory: [mem 0x2e6f9000-0x2e6f9fff]
[ 0.030755] PM: hibernation: Registered nosave memory: [mem 0x303df000-0x303dffff]
[ 0.030756] PM: hibernation: Registered nosave memory: [mem 0x303e0000-0x303e0fff]
[ 0.030756] PM: hibernation: Registered nosave memory: [mem 0x35540000-0x35540fff]
[ 0.030757] PM: hibernation: Registered nosave memory: [mem 0x38be3000-0x39054fff]
[ 0.030758] PM: hibernation: Registered nosave memory: [mem 0x394cc000-0x395b4fff]
[ 0.030758] PM: hibernation: Registered nosave memory: [mem 0x395b5000-0x39efefff]
[ 0.030759] PM: hibernation: Registered nosave memory: [mem 0x39f00000-0x3f7fffff]
[ 0.030760] PM: hibernation: Registered nosave memory: [mem 0x3f800000-0xdfffffff]
[ 0.030760] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.030760] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.030761] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.030761] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.030762] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.030762] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.030762] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.030763] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.030763] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.030764] [mem 0x3f800000-0xdfffffff] available for PCI devices
[ 0.030766] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.033707] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:12 nr_node_ids:1
[ 0.033879] percpu: Embedded 53 pages/cpu s176472 r8192 d32424 u262144
[ 0.033882] pcpu-alloc: s176472 r8192 d32424 u262144 alloc=1*2097152
[ 0.033882] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.033893] Built 1 zonelists, mobility grouping on. Total pages: 4094463
[ 0.033894] Policy zone: Normal
[ 0.033894] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.6.4-lfs-SVN-20200401 root=/dev/nvme0n1p5
[ 0.034396] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.034649] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.034704] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.058328] Memory: 16132636K/16637916K available (14340K kernel code, 1526K rwdata, 3372K rodata, 1152K init, 1096K bss, 505280K reserved, 0K cma-reserved)
[ 0.058358] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.058363] Kernel/User page tables isolation: enabled
[ 0.058417] rcu: Hierarchical RCU implementation.
[ 0.058417] rcu: RCU event tracing is enabled.
[ 0.058418] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=12.
[ 0.058419] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.058419] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.058539] NR_IRQS: 4352, nr_irqs: 2152, preallocated irqs: 16
[ 0.058989] random: get_random_bytes called from start_kernel+0x2fa/0x4c7 with crng_init=0
[ 0.059003] Console: colour dummy device 80x25
[ 0.059128] printk: console [tty0] enabled
[ 0.059136] ACPI: Core revision 20200110
[ 0.059470] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.059571] APIC: Switch to symmetric I/O mode setup
[ 0.059573] Switched APIC routing to physical flat.
[ 0.067525] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072504] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2036ff8d5, max_idle_ns: 440795275316 ns
[ 0.072508] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.96 BogoMIPS (lpj=3199980)
[ 0.072510] pid_max: default: 32768 minimum: 301
[ 0.074542] LSM: Security Framework initializing
[ 0.074548] SELinux: Initializing.
[ 0.074575] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.074594] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.074702] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.074718] process: using mwait in idle threads
[ 0.074720] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.074721] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.074723] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.074725] Spectre V2 : Mitigation: Full generic retpoline
[ 0.074726] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.074727] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.074728] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.074729] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.074730] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.074733] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.074734] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.074901] Freeing SMP alternatives memory: 40K
[ 0.075557] TSC deadline timer enabled
[ 0.075569] smpboot: CPU0: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.075609] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.075613] ... version: 4
[ 0.075614] ... bit width: 48
[ 0.075615] ... generic registers: 4
[ 0.075616] ... value mask: 0000ffffffffffff
[ 0.075617] ... max period: 00007fffffffffff
[ 0.075617] ... fixed-purpose events: 3
[ 0.075618] ... event mask: 000000070000000f
[ 0.075640] rcu: Hierarchical SRCU implementation.
[ 0.075700] smp: Bringing up secondary CPUs ...
[ 0.075731] x86: Booting SMP configuration:
[ 0.075732] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.078820] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.078820] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[ 0.078820] #7 #8 #9 #10 #11
[ 0.080886] smp: Brought up 1 node, 12 CPUs
[ 0.080886] smpboot: Max logical packages: 1
[ 0.080886] smpboot: Total of 12 processors activated (76799.52 BogoMIPS)
[ 0.081770] devtmpfs: initialized
[ 0.081770] PM: Registering ACPI NVS region [mem 0x303df000-0x303dffff] (4096 bytes)
[ 0.081770] PM: Registering ACPI NVS region [mem 0x394cc000-0x395b4fff] (954368 bytes)
[ 0.081770] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.081770] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.081770] kworker/u24:0 (71) used greatest stack depth: 14184 bytes left
[ 0.081840] PM: RTC time: 07:03:32, date: 2020-05-07
[ 0.081842] thermal_sys: Registered thermal governor 'step_wise'
[ 0.081842] thermal_sys: Registered thermal governor 'user_space'
[ 0.081883] NET: Registered protocol family 16
[ 0.081925] audit: initializing netlink subsys (disabled)
[ 0.081929] audit: type=2000 audit(1588835012.015:1): state=initialized audit_enabled=0 res=1
[ 0.081929] cpuidle: using governor menu
[ 0.081929] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.081929] ACPI: bus type PCI registered
[ 0.081929] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.081929] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.081929] PCI: Using configuration type 1 for base access
[ 0.084040] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.084535] kworker/u24:5 (583) used greatest stack depth: 14016 bytes left
[ 0.084540] ACPI: Added _OSI(Module Device)
[ 0.084542] ACPI: Added _OSI(Processor Device)
[ 0.084542] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084543] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084545] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.084546] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.084547] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.115125] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.636236] ACPI: Dynamic OEM Table Load:
[ 0.636241] ACPI: SSDT 0xFFFF9487AB01B000 000708 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.637002] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.637703] ACPI: Dynamic OEM Table Load:
[ 0.637707] ACPI: SSDT 0xFFFF9487AB028C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.638426] ACPI: Dynamic OEM Table Load:
[ 0.638429] ACPI: SSDT 0xFFFF9487ABF76400 00011B (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.639123] ACPI: Dynamic OEM Table Load:
[ 0.639126] ACPI: SSDT 0xFFFF9487AB01B800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.639984] ACPI: Dynamic OEM Table Load:
[ 0.639989] ACPI: SSDT 0xFFFF9487AB014000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.641011] ACPI: Dynamic OEM Table Load:
[ 0.641014] ACPI: SSDT 0xFFFF9487AB029400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.641753] ACPI: Dynamic OEM Table Load:
[ 0.641756] ACPI: SSDT 0xFFFF9487AB029800 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.644795] ACPI: Interpreter enabled
[ 0.644815] ACPI: (supports S0 S3 S4 S5)
[ 0.644817] ACPI: Using IOAPIC for interrupt routing
[ 0.644837] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.645390] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.650289] ACPI: Power Resource [WRST] (on)
[ 0.650331] ACPI: Power Resource [DRST] (on)
[ 0.651988] ACPI: Power Resource [USBC] (on)
[ 0.653716] ACPI: Power Resource [V0PR] (on)
[ 0.653816] ACPI: Power Resource [V1PR] (on)
[ 0.653911] ACPI: Power Resource [V2PR] (on)
[ 0.656602] ACPI: Power Resource [WRST] (on)
[ 0.658829] ACPI: Power Resource [FN00] (off)
[ 0.658872] ACPI: Power Resource [FN01] (off)
[ 0.658913] ACPI: Power Resource [FN02] (off)
[ 0.658954] ACPI: Power Resource [FN03] (off)
[ 0.658994] ACPI: Power Resource [FN04] (off)
[ 0.659511] ACPI: Power Resource [PIN] (off)
[ 0.659613] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.659617] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.659700] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.659775] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.659776] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.659898] PCI host bridge to bus 0000:00
[ 0.659900] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.659901] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.659902] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.659904] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.659905] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.659906] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.659907] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.659909] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.659910] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.659911] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.659912] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.659913] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.659915] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.659916] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.659917] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.659918] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xdfffffff window]
[ 0.659920] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.659921] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.659927] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[ 0.660127] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[ 0.660135] pci 0000:00:02.0: reg 0x10: [mem 0x50000000-0x50ffffff 64bit]
[ 0.660139] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.660142] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.660151] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.660394] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.660436] pci 0000:00:12.0: reg 0x10: [mem 0x5133d000-0x5133dfff 64bit]
[ 0.660705] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.660749] pci 0000:00:14.0: reg 0x10: [mem 0x51320000-0x5132ffff 64bit]
[ 0.660880] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.661019] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.661054] pci 0000:00:14.2: reg 0x10: [mem 0x51336000-0x51337fff 64bit]
[ 0.661072] pci 0000:00:14.2: reg 0x18: [mem 0x5133c000-0x5133cfff 64bit]
[ 0.661265] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.661305] pci 0000:00:16.0: reg 0x10: [mem 0x5133b000-0x5133bfff 64bit]
[ 0.661416] pci 0000:00:16.0: PME# supported from D3hot
[ 0.661613] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[ 0.661649] pci 0000:00:17.0: reg 0x10: [mem 0x51334000-0x51335fff]
[ 0.661663] pci 0000:00:17.0: reg 0x14: [mem 0x5133a000-0x5133a0ff]
[ 0.661678] pci 0000:00:17.0: reg 0x18: [io 0x3090-0x3097]
[ 0.661693] pci 0000:00:17.0: reg 0x1c: [io 0x3080-0x3083]
[ 0.661707] pci 0000:00:17.0: reg 0x20: [io 0x3060-0x307f]
[ 0.661722] pci 0000:00:17.0: reg 0x24: [mem 0x51339000-0x513397ff]
[ 0.661800] pci 0000:00:17.0: PME# supported from D3hot
[ 0.661962] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.662129] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.662277] pci 0000:00:1b.2: [8086:a342] type 01 class 0x060400
[ 0.662456] pci 0000:00:1b.2: PME# supported from D0 D3hot D3cold
[ 0.662615] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[ 0.662794] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[ 0.662976] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
[ 0.663145] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.663355] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.663526] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.663729] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
[ 0.663970] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.664048] pci 0000:00:1f.3: reg 0x10: [mem 0x51330000-0x51333fff 64bit]
[ 0.664120] pci 0000:00:1f.3: reg 0x20: [mem 0x51000000-0x510fffff 64bit]
[ 0.664268] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.664512] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.664626] pci 0000:00:1f.4: reg 0x10: [mem 0x51338000-0x513380ff 64bit]
[ 0.664780] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.665036] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.665062] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.665232] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
[ 0.665290] pci 0000:00:1f.6: reg 0x10: [mem 0x51300000-0x5131ffff]
[ 0.665528] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.665682] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.665788] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 0.665865] pci 0000:02:00.0: reg 0x10: [mem 0x51200000-0x51201fff 64bit]
[ 0.666137] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.666343] pci 0000:00:1b.2: PCI bridge to [bus 02]
[ 0.666352] pci 0000:00:1b.2: bridge window [mem 0x51200000-0x512fffff]
[ 0.666511] pci 0000:03:00.0: [144d:a808] type 00 class 0x010802
[ 0.666511] pci 0000:03:00.0: reg 0x10: [mem 0x51100000-0x51103fff 64bit]
[ 0.666818] pci 0000:00:1b.4: PCI bridge to [bus 03]
[ 0.666827] pci 0000:00:1b.4: bridge window [mem 0x51100000-0x511fffff]
[ 0.666898] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.666977] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.667962] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.667979] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.667994] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.668009] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.668025] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.668040] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.668055] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.668070] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.668514] iommu: Default domain type: Translated
[ 0.668516] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.668516] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.668516] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.668517] vgaarb: loaded
[ 0.668551] SCSI subsystem initialized
[ 0.668560] libata version 3.00 loaded.
[ 0.668560] ACPI: bus type USB registered
[ 0.668560] usbcore: registered new interface driver usbfs
[ 0.668560] usbcore: registered new interface driver hub
[ 0.668560] usbcore: registered new device driver usb
[ 0.668560] pps_core: LinuxPPS API ver. 1 registered
[ 0.668560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.668560] PTP clock support registered
[ 0.668560] EDAC MC: Ver: 3.0.0
[ 0.668635] Registered efivars operations
[ 0.668635] Advanced Linux Sound Architecture Driver Initialized.
[ 0.668635] PCI: Using ACPI for IRQ routing
[ 0.753219] PCI: pci_cache_line_size set to 64 bytes
[ 0.753333] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.753334] e820: reserve RAM buffer [mem 0x2e6e9018-0x2fffffff]
[ 0.753334] e820: reserve RAM buffer [mem 0x303df000-0x33ffffff]
[ 0.753334] e820: reserve RAM buffer [mem 0x35540000-0x37ffffff]
[ 0.753335] e820: reserve RAM buffer [mem 0x38be3000-0x3bffffff]
[ 0.753335] e820: reserve RAM buffer [mem 0x394cc000-0x3bffffff]
[ 0.753336] e820: reserve RAM buffer [mem 0x39f00000-0x3bffffff]
[ 0.753336] e820: reserve RAM buffer [mem 0x4be800000-0x4bfffffff]
[ 0.753512] NetLabel: Initializing
[ 0.753512] NetLabel: domain hash size = 128
[ 0.753512] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.753512] NetLabel: unlabeled traffic allowed by default
[ 0.753536] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.753539] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.756519] clocksource: Switched to clocksource tsc-early
[ 0.807838] VFS: Disk quotas dquot_6.6.0
[ 0.807848] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.807867] pnp: PnP ACPI init
[ 0.807992] system 00:00: [io 0x0a00-0x0a2f] has been reserved
[ 0.807994] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.807995] system 00:00: [io 0x0a40-0x0a4f] has been reserved
[ 0.807999] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.808442] pnp 00:01: [dma 0 disabled]
[ 0.808464] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.808518] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.808519] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.808522] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.808532] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.808575] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.808578] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.808663] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.808664] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.808666] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.808667] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.808668] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.808669] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.808670] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.808672] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.808675] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.808775] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.808777] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.808778] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.808779] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.808781] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.808783] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.808784] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.808787] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.808921] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.808923] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.809386] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.809718] pnp: PnP ACPI: found 9 devices
[ 0.814849] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.814854] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[ 0.814856] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[ 0.814858] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[ 0.814863] pci 0000:00:1d.0: BAR 8: assigned [mem 0x3f800000-0x3f9fffff]
[ 0.814869] pci 0000:00:1d.0: BAR 9: assigned [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.814871] pci 0000:00:1d.0: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.814873] pci 0000:00:1b.0: PCI bridge to [bus 01]
[ 0.814895] pci 0000:00:1b.2: PCI bridge to [bus 02]
[ 0.814902] pci 0000:00:1b.2: bridge window [mem 0x51200000-0x512fffff]
[ 0.814915] pci 0000:00:1b.4: PCI bridge to [bus 03]
[ 0.814921] pci 0000:00:1b.4: bridge window [mem 0x51100000-0x511fffff]
[ 0.814934] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.814953] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.814958] pci 0000:00:1d.0: bridge window [io 0x4000-0x4fff]
[ 0.814965] pci 0000:00:1d.0: bridge window [mem 0x3f800000-0x3f9fffff]
[ 0.814970] pci 0000:00:1d.0: bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.814980] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.814981] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.814982] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.814983] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.814984] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.814985] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.814986] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.814988] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.814989] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.814990] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.814991] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.814992] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.814993] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.814994] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.814995] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.814996] pci_bus 0000:00: resource 19 [mem 0x3f800000-0xdfffffff window]
[ 0.814998] pci_bus 0000:00: resource 20 [mem 0xfc800000-0xfe7fffff window]
[ 0.814999] pci_bus 0000:02: resource 1 [mem 0x51200000-0x512fffff]
[ 0.815000] pci_bus 0000:03: resource 1 [mem 0x51100000-0x511fffff]
[ 0.815001] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.815002] pci_bus 0000:05: resource 1 [mem 0x3f800000-0x3f9fffff]
[ 0.815003] pci_bus 0000:05: resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref]
[ 0.815081] NET: Registered protocol family 2
[ 0.815142] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.815153] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.815224] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.815292] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.815308] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.815327] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.815364] NET: Registered protocol family 1
[ 0.815405] RPC: Registered named UNIX socket transport module.
[ 0.815406] RPC: Registered udp transport module.
[ 0.815407] RPC: Registered tcp transport module.
[ 0.815408] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.815451] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.815673] PCI: CLS 64 bytes, default 64
[ 0.815692] DMAR: Host address width 39
[ 0.815693] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.815697] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.815699] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.815702] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.815703] DMAR: RMRR base: 0x000000399d4000 end: 0x00000039c1dfff
[ 0.815705] DMAR: RMRR base: 0x0000003b000000 end: 0x0000003f7fffff
[ 0.815712] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.815713] software IO TLB: mapped [mem 0x2a6e9000-0x2e6e9000] (64MB)
[ 0.815762] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 0.815763] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.815764] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.815765] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.816291] check: Scanning for low memory corruption every 60 seconds
[ 0.816539] Initialise system trusted keyrings
[ 0.816553] workingset: timestamp_bits=56 max_order=22 bucket_order=0
[ 0.817359] NFS: Registering the id_resolver key type
[ 0.817362] Key type id_resolver registered
[ 0.817363] Key type id_legacy registered
[ 0.819351] Key type asymmetric registered
[ 0.819352] Asymmetric key parser 'x509' registered
[ 0.819356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.819357] io scheduler mq-deadline registered
[ 0.819358] io scheduler kyber registered
[ 0.819680] pcieport 0000:00:1b.2: AER: enabled with IRQ 121
[ 0.819923] pcieport 0000:00:1b.4: AER: enabled with IRQ 122
[ 0.820258] efifb: probing for efifb
[ 0.820263] efifb: framebuffer at 0x40000000, using 3072k, total 3072k
[ 0.820264] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.820265] efifb: scrolling: redraw
[ 0.820266] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.821092] Console: switching to colour frame buffer device 128x48
[ 0.821913] fb0: EFI VGA frame buffer device
[ 0.822019] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.822044] ACPI: Sleep Button [SLPB]
[ 0.822066] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.822089] ACPI: Power Button [PWRB]
[ 0.822111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.822139] ACPI: Power Button [PWRF]
[ 0.822403] Monitor-Mwait will be used to enter C-1 state
[ 0.822407] Monitor-Mwait will be used to enter C-2 state
[ 0.822409] Monitor-Mwait will be used to enter C-3 state
[ 0.822412] ACPI: \_SB_.PR00: Found 3 idle states
[ 0.822557] ACPI: \_SB_.PR01: Found 3 idle states
[ 0.822692] ACPI: \_SB_.PR02: Found 3 idle states
[ 0.822826] ACPI: \_SB_.PR03: Found 3 idle states
[ 0.822958] ACPI: \_SB_.PR04: Found 3 idle states
[ 0.823090] ACPI: \_SB_.PR05: Found 3 idle states
[ 0.823223] ACPI: \_SB_.PR06: Found 3 idle states
[ 0.823356] ACPI: \_SB_.PR07: Found 3 idle states
[ 0.823490] ACPI: \_SB_.PR08: Found 3 idle states
[ 0.823636] ACPI: \_SB_.PR09: Found 3 idle states
[ 0.823798] ACPI: \_SB_.PR10: Found 3 idle states
[ 0.824173] ACPI: \_SB_.PR11: Found 3 idle states
[ 1.826658] tsc: Refined TSC clocksource calibration: 3191.994 MHz
[ 1.826887] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02bef1b37, max_idle_ns: 440795253061 ns
[ 1.827228] clocksource: Switched to clocksource tsc
[ 3.874657] ACPI: Invalid passive threshold
[ 5.922644] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.922892] ACPI: Thermal Zone [TZ10] (17 C)
[ 5.923379] thermal LNXTHERM:01: registered as thermal_zone1
[ 5.923667] ACPI: Thermal Zone [TZ00] (28 C)
[ 5.924043] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.924415] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 5.925248] Non-volatile memory driver v1.3
[ 5.925597] Linux agpgart interface v0.103
[ 5.926531] checking generic (40000000 300000) vs hw (50000000 1000000)
[ 5.926532] checking generic (40000000 300000) vs hw (40000000 10000000)
[ 5.926532] fb0: switching to inteldrmfb from EFI VGA
[ 5.926869] Console: switching to colour dummy device 80x25
[ 5.926881] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 5.927881] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.927882] [drm] Driver supports precise vblank timestamp query.
[ 5.928278] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.928297] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
[ 5.928298] i915 0000:00:02.0: Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
[ 5.928300] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[ 6.200253] [drm] failed to retrieve link info, disabling eDP
[ 6.218718] [drm] Initialized i915 1.6.0 20200114 for 0000:00:02.0 on minor 0
[ 6.219979] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.220148] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 6.232347] loop: module loaded
[ 6.232451] nvme nvme0: pci function 0000:03:00.0
[ 6.232467] ahci 0000:00:17.0: version 3.0
[ 6.232721] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 6.232724] ahci 0000:00:17.0: flags: 64bit ncq sntf clo only pio slum part ems deso sadm sds apst
[ 6.249004] scsi host0: ahci
[ 6.249063] scsi host1: ahci
[ 6.249103] scsi host2: ahci
[ 6.249143] scsi host3: ahci
[ 6.249187] scsi host4: ahci
[ 6.249223] scsi host5: ahci
[ 6.249246] ata1: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339100 irq 127
[ 6.249250] ata2: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339180 irq 127
[ 6.249253] ata3: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339200 irq 127
[ 6.249256] ata4: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339280 irq 127
[ 6.249259] ata5: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339300 irq 127
[ 6.249261] ata6: SATA max UDMA/133 abar m2048@0x51339000 port 0x51339380 irq 127
[ 6.249330] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 6.249331] e100: Copyright(c) 1999-2006 Intel Corporation
[ 6.249337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.249338] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.249344] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 6.249345] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.249568] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.259472] fbcon: i915drmfb (fb0) is primary device
[ 6.300561] random: fast init done
[ 6.304124] Console: switching to colour frame buffer device 320x90
[ 6.320665] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 6.443038] nvme nvme0: missing or invalid SUBNQN field.
[ 6.443074] nvme nvme0: Shutdown timeout set to 8 seconds
[ 6.444728] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 6.457019] nvme nvme0: 12/0/0 default/read/poll queues
[ 6.462666] nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 6.510831] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b4:2e:99:42:d4:53
[ 6.510877] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 6.511059] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[ 6.511081] sky2: driver version 1.30
[ 6.511174] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.511187] ehci-pci: EHCI PCI platform driver
[ 6.511202] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.511215] ohci-pci: OHCI PCI platform driver
[ 6.511229] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.511361] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.511388] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 6.512487] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[ 6.512536] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.512720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 6.512735] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.512748] usb usb1: Product: xHCI Host Controller
[ 6.512757] usb usb1: Manufacturer: Linux 5.6.4 xhci-hcd
[ 6.512766] usb usb1: SerialNumber: 0000:00:14.0
[ 6.512885] hub 1-0:1.0: USB hub found
[ 6.512948] hub 1-0:1.0: 16 ports detected
[ 6.513894] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.513942] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 6.513985] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 6.514029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 6.514044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.514057] usb usb2: Product: xHCI Host Controller
[ 6.514066] usb usb2: Manufacturer: Linux 5.6.4 xhci-hcd
[ 6.514075] usb usb2: SerialNumber: 0000:00:14.0
[ 6.514140] hub 2-0:1.0: USB hub found
[ 6.514176] hub 2-0:1.0: 10 ports detected
[ 6.514813] usbcore: registered new interface driver usblp
[ 6.514861] usbcore: registered new interface driver usb-storage
[ 6.514888] i8042: PNP: No PS/2 controller found.
[ 6.515002] mousedev: PS/2 mouse device common for all mice
[ 6.515158] rtc_cmos 00:03: RTC can wake from S4
[ 6.516236] rtc_cmos 00:03: registered as rtc0
[ 6.516257] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 6.516388] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 6.516476] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 6.517391] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 6.517409] intel_pstate: Intel P-state driver initializing
[ 6.517998] intel_pstate: HWP enabled
[ 6.518012] EFI Variables Facility v0.08 2004-May-17
[ 6.541672] hid: raw HID events driver (C) Jiri Kosina
[ 6.541774] usbcore: registered new interface driver usbhid
[ 6.541785] usbhid: USB HID core driver
[ 6.541896] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.542134] Initializing XFRM netlink socket
[ 6.542196] NET: Registered protocol family 10
[ 6.542264] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffffb9099300)
[ 6.542320] Segment Routing with IPv6
[ 6.542369] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 6.543179] NET: Registered protocol family 17
[ 6.543943] Key type dns_resolver registered
[ 6.545014] microcode: sig=0x906ea, pf=0x2, revision=0xaa
[ 6.545865] microcode: Microcode Update Driver: v2.2.
[ 6.545867] IPI shorthand broadcast: enabled
[ 6.547384] sched_clock: Marking stable (6539084448, 7544442)->(6549909677, -3280787)
[ 6.548220] registered taskstats version 1
[ 6.548974] Loading compiled-in X.509 certificates
[ 6.550347] PM: Magic number: 4:771:65
[ 6.551164] printk: console [netcon0] enabled
[ 6.551898] netconsole: network logging started
[ 6.552647] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.553732] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.554464] ALSA device list:
[ 6.555190] No soundcards found.
[ 6.555929] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 6.556654] cfg80211: failed to load regulatory.db
[ 6.560371] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.561134] ata3: SATA link down (SStatus 4 SControl 300)
[ 6.562046] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.562999] ata1: SATA link down (SStatus 4 SControl 300)
[ 6.563745] ata4: SATA link down (SStatus 4 SControl 300)
[ 6.564675] ata2: SATA link down (SStatus 4 SControl 300)
[ 6.565620] ata6.00: ATAPI: HL-DT-ST DVDRAM GH24NSD1, LW00, max UDMA/133
[ 6.566481] ata5.00: ATA-10: WDC WD40EZRZ-00GXCB0, 80.00A80, max UDMA/133
[ 6.567194] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 6.568587] ata5.00: configured for UDMA/133
[ 6.569056] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.569298] ata6.00: configured for UDMA/133
[ 6.569380] scsi 4:0:0:0: Direct-Access ATA WDC WD40EZRZ-00G 0A80 PQ: 0 ANSI: 5
[ 6.569444] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 6.569458] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 6.569459] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 6.569462] sd 4:0:0:0: [sda] Write Protect is off
[ 6.569463] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.569468] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.570018] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.575002] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSD1 LW00 PQ: 0 ANSI: 5
[ 6.575087] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.577286] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.578016] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 6.578742] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.579460] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.580177] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.580888] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.602117] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 6.602833] snd_hda_codec_generic hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.603542] snd_hda_codec_generic hdaudioC0D2: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.604246] snd_hda_codec_generic hdaudioC0D2: mono: mono_out=0x0
[ 6.604949] snd_hda_codec_generic hdaudioC0D2: dig-out=0x3/0x0
[ 6.605646] snd_hda_codec_generic hdaudioC0D2: inputs:
[ 6.608002] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 6.608733] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 6.609465] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 6.610225] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 6.610989] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 6.611757] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 6.612519] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 6.613276] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 6.614037] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 6.621525] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.625239] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.625892] sda: sda1
[ 6.633359] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 6.633528] sd 4:0:0:0: [sda] Attached SCSI disk
[ 6.633572] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 6.641333] md: Waiting for all devices to be available before autodetect
[ 6.645156] md: If you don't use raid, use raid=noautodetect
[ 6.649283] md: Autodetecting RAID arrays.
[ 6.653105] md: autorun ...
[ 6.656888] md: ... autorun DONE.
[ 6.664056] EXT4-fs (nvme0n1p5): INFO: recovery required on readonly filesystem
[ 6.667856] EXT4-fs (nvme0n1p5): write access will be enabled during recovery
[ 6.726243] EXT4-fs (nvme0n1p5): recovery complete
[ 6.730996] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.731972] VFS: Mounted root (ext4 filesystem) readonly on device 259:5.
[ 6.733134] devtmpfs: mounted
[ 6.734478] Freeing unused kernel image (initmem) memory: 1152K
[ 6.735538] Write protecting the kernel read-only data: 20480k
[ 6.736791] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 6.737882] Freeing unused kernel image (rodata/data gap) memory: 724K
[ 6.738708] Run /sbin/init as init process
[ 6.739488] with arguments:
[ 6.739489] /sbin/init
[ 6.739489] with environment:
[ 6.739489] HOME=/
[ 6.739489] TERM=linux
[ 6.739489] BOOT_IMAGE=/boot/vmlinuz-5.6.4-lfs-SVN-20200401
[ 6.752706] stty (1796) used greatest stack depth: 13592 bytes left
[ 6.794815] ip (1848) used greatest stack depth: 12440 bytes left
[ 6.814687] udevd[1873]: starting version 3.2.9
[ 6.816941] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.817048] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.817055] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.818990] udevd[1873]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/40-libsane.rules'
[ 6.832530] udevd[1873]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules'
[ 6.833591] udevd[1874]: starting eudev-3.2.9
[ 6.835570] udevd[1874]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/40-libsane.rules'
[ 6.836514] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[ 6.840197] udevd[1874]: GOTO 'libsane_rules_end' has no matching label in: '/etc/udev/rules.d/S99-2000S1.rules'
[ 6.861058] random: crng init done
[ 6.861059] random: 7 urandom warning(s) missed due to ratelimiting
[ 6.863969] e1000e 0000:00:1f.6 eth1: renamed from eth0
[ 6.864281] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 6.865865] Intel(R) Wireless WiFi driver for Linux
[ 6.865865] Copyright(c) 2003- 2015 Intel Corporation
[ 6.865898] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 6.868430] iwlwifi 0000:02:00.0: loaded firmware version 36.9f0a2d68.0 8000C-36.ucode op_mode iwlmvm
[ 6.872501] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
[ 6.946660] iwlwifi 0000:02:00.0: base HW address: 28:16:ad:ae:bf:96
[ 6.969371] usb 1-5: New USB device found, idVendor=045e, idProduct=0752, bcdDevice= 1.10
[ 6.969375] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.969378] usb 1-5: Product: Wired Keyboard 400
[ 6.969381] usb 1-5: Manufacturer: Microsoft
[ 6.974470] input: Microsoft Wired Keyboard 400 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:045E:0752.0001/input/input14
[ 7.020683] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.020898] thermal thermal_zone3: failed to read out thermal zone (-61)
[ 7.024333] iwlwifi 0000:02:00.0 wlan1: renamed from wlan0
[ 7.026075] hid-generic 0003:045E:0752.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 400] on usb-0000:00:14.0-5/input0
[ 7.139584] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[ 7.269767] usb 1-6: New USB device found, idVendor=045e, idProduct=0084, bcdDevice= 1.04
[ 7.269772] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.269775] usb 1-6: Product: Microsoft Basic Optical Mouse
[ 7.269778] usb 1-6: Manufacturer: Microsoft
[ 7.274048] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:0084.0002/input/input15
[ 7.274419] hid-generic 0003:045E:0084.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on usb-0000:00:14.0-6/input0
[ 7.388573] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[ 7.515912] usb 1-12: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
[ 7.515917] usb 1-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.532045] Bluetooth: Core ver 2.22
[ 7.532051] NET: Registered protocol family 31
[ 7.532051] Bluetooth: HCI device and connection manager initialized
[ 7.532053] Bluetooth: HCI socket layer initialized
[ 7.532054] Bluetooth: L2CAP socket layer initialized
[ 7.532055] Bluetooth: SCO socket layer initialized
[ 7.533689] usbcore: registered new interface driver btusb
[ 7.534756] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 7.541887] Bluetooth: hci0: Device revision is 5
[ 7.541890] Bluetooth: hci0: Secure boot is enabled
[ 7.541891] Bluetooth: hci0: OTP lock is enabled
[ 7.541893] Bluetooth: hci0: API lock is enabled
[ 7.541894] Bluetooth: hci0: Debug lock is disabled
[ 7.541897] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 7.541931] bluetooth hci0: Direct firmware load for intel/ibt-11-5.sfi failed with error -2
[ 7.541934] Bluetooth: hci0: Failed to load Intel firmware file (-2)
[ 7.703595] Adding 8391680k swap on /dev/nvme0n1p9. Priority:-2 extents:1 across:8391680k SS
[ 7.744104] EXT4-fs (nvme0n1p5): re-mounted. Opts: (null)
[ 9.880130] EXT4-fs (nvme0n1p5): re-mounted. Opts: (null)
[ 9.913684] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
[ 9.972940] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.945402] iwlwifi 0000:02:00.0: BIOS contains WGDS but no WRDS
[ 11.950453] ip (4050) used greatest stack depth: 11744 bytes left
[ 15.526009] wlan1: authenticate with 7c:ff:4d:08:df:22
[ 15.534299] wlan1: send auth to 7c:ff:4d:08:df:22 (try 1/3)
[ 15.542136] wlan1: authenticated
[ 15.542528] wlan1: associate with 7c:ff:4d:08:df:22 (try 1/3)
[ 15.548905] wlan1: RX AssocResp from 7c:ff:4d:08:df:22 (capab=0x431 status=0 aid=4)
[ 15.560037] wlan1: associated
[ 15.584424] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 38.438766] elogind-daemon[4352]: New seat seat0.
[ 38.439351] elogind-daemon[4352]: Watching system buttons on /dev/input/event2 (Power Button)
[ 38.454607] elogind-daemon[4352]: Watching system buttons on /dev/input/event1 (Power Button)
[ 38.454652] elogind-daemon[4352]: Watching system buttons on /dev/input/event0 (Sleep Button)
[ 38.454739] elogind-daemon[4352]: Watching system buttons on /dev/input/event14 (Microsoft Wired Keyboard 400)
[-- Attachment #4: lspci-k-5.6.4 --]
[-- Type: application/octet-stream, Size: 3480 bytes --]
00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
DeviceName: Onboard - Other
Subsystem: Gigabyte Technology Co., Ltd 8th Gen Core Processor Host Bridge/DRAM Registers
Kernel driver in use: skl_uncore
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 630 (Desktop)
DeviceName: Onboard - Video
Subsystem: Gigabyte Technology Co., Ltd UHD Graphics 630 (Desktop)
Kernel driver in use: i915
00:12.0 Signal processing controller: Intel Corporation Cannon Lake PCH Thermal Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Gigabyte Technology Co., Ltd Cannon Lake PCH Thermal Controller
00:14.0 USB controller: Intel Corporation Cannon Lake PCH USB 3.1 xHCI Host Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Gigabyte Technology Co., Ltd Cannon Lake PCH USB 3.1 xHCI Host Controller
Kernel driver in use: xhci_hcd
00:14.2 RAM memory: Intel Corporation Cannon Lake PCH Shared SRAM (rev 10)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Cannon Lake PCH Shared SRAM
00:16.0 Communication controller: Intel Corporation Cannon Lake PCH HECI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Gigabyte Technology Co., Ltd Cannon Lake PCH HECI Controller
00:17.0 SATA controller: Intel Corporation Cannon Lake PCH SATA AHCI Controller (rev 10)
DeviceName: Onboard - SATA
Subsystem: Gigabyte Technology Co., Ltd Cannon Lake PCH SATA AHCI Controller
Kernel driver in use: ahci
00:1b.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #17 (rev f0)
Kernel driver in use: pcieport
00:1b.2 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #19 (rev f0)
Kernel driver in use: pcieport
00:1b.4 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #21 (rev f0)
Kernel driver in use: pcieport
00:1c.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #1 (rev f0)
Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation Cannon Lake PCH PCI Express Root Port #9 (rev f0)
Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation Z390 Chipset LPC/eSPI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Gigabyte Technology Co., Ltd Z390 Chipset LPC/eSPI Controller
00:1f.3 Audio device: Intel Corporation Cannon Lake PCH cAVS (rev 10)
DeviceName: Onboard - Sound
Subsystem: Gigabyte Technology Co., Ltd Cannon Lake PCH cAVS
Kernel driver in use: snd_hda_intel
00:1f.4 SMBus: Intel Corporation Cannon Lake PCH SMBus Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Gigabyte Technology Co., Ltd Cannon Lake PCH SMBus Controller
Kernel driver in use: i801_smbus
00:1f.5 Serial bus controller [0c80]: Intel Corporation Cannon Lake PCH SPI Controller (rev 10)
DeviceName: Onboard - Other
Subsystem: Intel Corporation Cannon Lake PCH SPI Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
DeviceName: Onboard - Ethernet
Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection (7) I219-V
Kernel driver in use: e1000e
02:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
Subsystem: Intel Corporation Dual Band Wireless-AC 8260
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
03:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller SM981/PM981/PM983
Kernel driver in use: nvme
next prev parent reply other threads:[~2020-05-08 21:31 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-01 15:46 power-off delay/hang due to commit 6d25be57 (mainline) Stephen Berman
2020-05-06 21:57 ` Sebastian Andrzej Siewior
2020-05-08 21:30 ` Stephen Berman [this message]
2020-05-13 22:04 ` Sebastian Andrzej Siewior
2020-05-14 21:39 ` Stephen Berman
2020-05-22 16:40 ` Sebastian Andrzej Siewior
2020-06-09 10:06 ` Stephen Berman
2020-06-09 20:23 ` Sebastian Andrzej Siewior
2020-06-10 8:21 ` Stephen Berman
2020-06-10 10:25 ` Sebastian Andrzej Siewior
2020-06-10 22:49 ` Stephen Berman
2020-06-11 15:39 ` Stephen Berman
2020-06-12 11:01 ` Sebastian Andrzej Siewior
2020-06-14 12:12 ` Stephen Berman
2020-06-14 17:10 ` Sebastian Andrzej Siewior
2020-06-15 7:58 ` Stephen Berman
2020-06-15 14:51 ` Sebastian Andrzej Siewior
2020-06-15 15:41 ` Stephen Berman
2020-06-15 15:58 ` Sebastian Andrzej Siewior
2020-06-15 16:19 ` Stephen Berman
2020-06-15 16:32 ` Sebastian Andrzej Siewior
2020-06-16 7:14 ` Stephen Berman
2020-06-16 7:38 ` Sebastian Andrzej Siewior
2020-06-16 8:13 ` Stephen Berman
2020-06-16 15:55 ` Sebastian Andrzej Siewior
2020-06-16 20:28 ` Stephen Berman
2020-06-17 14:27 ` Sebastian Andrzej Siewior
2020-06-17 21:09 ` Stephen Berman
2020-06-24 20:11 ` Sebastian Andrzej Siewior
2020-06-24 21:49 ` Stephen Berman
2020-07-14 13:44 ` Sebastian Andrzej Siewior
2020-07-14 13:54 ` [Devel] " Rafael J. Wysocki
2020-07-14 13:54 ` Rafael J. Wysocki
2020-07-14 14:11 ` Sebastian Andrzej Siewior
2020-07-14 15:53 ` [Devel] " Rafael J. Wysocki
2020-07-14 15:53 ` Rafael J. Wysocki
2020-07-14 16:10 ` Sebastian Andrzej Siewior
2020-08-11 10:27 ` Sebastian Andrzej Siewior
2020-07-19 10:07 ` Stephen Berman
2020-08-11 11:58 ` Stephen Berman
2020-08-11 13:29 ` Sebastian Andrzej Siewior
2020-08-11 14:34 ` [Devel] " Rafael J. Wysocki
2020-08-11 14:34 ` Rafael J. Wysocki
2020-08-11 15:25 ` Sebastian Andrzej Siewior
2020-08-11 17:22 ` Stephen Berman
2020-08-11 18:49 ` Sebastian Andrzej Siewior
2020-10-06 21:49 ` Sebastian Andrzej Siewior
2020-10-07 16:18 ` Rafael J. Wysocki
2020-10-26 17:20 ` Sebastian Andrzej Siewior
2020-12-02 18:03 ` Sebastian Andrzej Siewior
2020-12-02 18:31 ` [Devel] " Rafael J. Wysocki
2020-12-02 18:31 ` Rafael J. Wysocki
2020-12-02 19:13 ` [Devel] " Rafael J. Wysocki
2020-12-02 19:13 ` Rafael J. Wysocki
2020-12-31 20:46 ` [Devel] " Rafael J. Wysocki
2020-12-31 20:46 ` Rafael J. Wysocki
2021-01-04 15:38 ` Stephen Berman
2021-01-24 13:49 ` Stephen Berman
2020-06-20 19:08 ` [PATCH] SCSI: Disable CD-ROM poll on shutdown kernel test robot
2020-06-20 19:08 ` kernel test robot
2020-06-09 21:26 ` power-off delay/hang due to commit 6d25be57 (mainline) Stephen Berman
-- strict thread matches above, loose matches on Subject: below --
2020-08-11 14:02 [Devel] " Rafael J. Wysocki
2020-08-11 14:02 ` Rafael J. Wysocki
2021-01-02 11:03 [Devel] " Rafael J. Wysocki
2021-01-02 11:03 ` Rafael J. Wysocki
2021-01-25 16:25 [Devel] " Rafael J. Wysocki
2021-01-25 16:25 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87v9l65d2y.fsf@gmx.net \
--to=stephen.berman@gmx.net \
--cc=bigeasy@linutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.