* [PATCH 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support.
@ 2019-02-13 0:33 ` Eric Anholt
0 siblings, 0 replies; 14+ messages in thread
From: Eric Anholt @ 2019-02-13 0:33 UTC (permalink / raw)
To: Florian Fainelli
Cc: Stefan Wahren, linux-kernel, Eric Anholt,
bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel
We don't have ASB master/slave regs for this domain, so just skip that
step.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
---
drivers/soc/bcm/bcm2835-power.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 48412957ec7a..4a1b99b773c0 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -150,7 +150,12 @@ struct bcm2835_power {
static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
{
- u64 start = ktime_get_ns();
+ u64 start;
+
+ if (!reg)
+ return 0;
+
+ start = ktime_get_ns();
/* Enable the module's async AXI bridges. */
ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP);
@@ -165,7 +170,12 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
{
- u64 start = ktime_get_ns();
+ u64 start;
+
+ if (!reg)
+ return 0;
+
+ start = ktime_get_ns();
/* Enable the module's async AXI bridges. */
ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support. @ 2019-02-13 0:33 ` Eric Anholt 0 siblings, 0 replies; 14+ messages in thread From: Eric Anholt @ 2019-02-13 0:33 UTC (permalink / raw) To: Florian Fainelli Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stefan Wahren, bcm-kernel-feedback-list, Eric Anholt We don't have ASB master/slave regs for this domain, so just skip that step. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") --- drivers/soc/bcm/bcm2835-power.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c index 48412957ec7a..4a1b99b773c0 100644 --- a/drivers/soc/bcm/bcm2835-power.c +++ b/drivers/soc/bcm/bcm2835-power.c @@ -150,7 +150,12 @@ struct bcm2835_power { static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) { - u64 start = ktime_get_ns(); + u64 start; + + if (!reg) + return 0; + + start = ktime_get_ns(); /* Enable the module's async AXI bridges. */ ASB_WRITE(reg, ASB_READ(reg) & ~ASB_REQ_STOP); @@ -165,7 +170,12 @@ static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg) static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg) { - u64 start = ktime_get_ns(); + u64 start; + + if (!reg) + return 0; + + start = ktime_get_ns(); /* Enable the module's async AXI bridges. */ ASB_WRITE(reg, ASB_READ(reg) | ASB_REQ_STOP); -- 2.20.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. 2019-02-13 0:33 ` Eric Anholt @ 2019-02-13 0:33 ` Eric Anholt -1 siblings, 0 replies; 14+ messages in thread From: Eric Anholt @ 2019-02-13 0:33 UTC (permalink / raw) To: Florian Fainelli Cc: Stefan Wahren, linux-kernel, Eric Anholt, bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel The clock driver may probe after ours and so we need to pass the -EPROBE_DEFER out. Fix the other error path while we're here. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") --- drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c index 4a1b99b773c0..11f9469423f7 100644 --- a/drivers/soc/bcm/bcm2835-power.c +++ b/drivers/soc/bcm/bcm2835-power.c @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) } } -static void +static int bcm2835_init_power_domain(struct bcm2835_power *power, int pd_xlate_index, const char *name) { @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; dom->clk = devm_clk_get(dev->parent, name); + if (IS_ERR(dom->clk)) { + int ret = PTR_ERR(dom->clk); + + if (ret == -EPROBE_DEFER) + return ret; + } dom->base.name = name; dom->base.power_on = bcm2835_power_pd_power_on; @@ -505,6 +511,8 @@ bcm2835_init_power_domain(struct bcm2835_power *power, pm_genpd_init(&dom->base, NULL, true); power->pd_xlate.domains[pd_xlate_index] = &dom->base; + + return 0; } /** bcm2835_reset_reset - Resets a block that has a reset line in the @@ -602,7 +610,7 @@ static int bcm2835_power_probe(struct platform_device *pdev) { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 }, { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 }, }; - int ret, i; + int ret = 0, i; u32 id; power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); @@ -629,8 +637,11 @@ static int bcm2835_power_probe(struct platform_device *pdev) power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names); - for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) - bcm2835_init_power_domain(power, i, power_domain_names[i]); + for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { + ret = bcm2835_init_power_domain(power, i, power_domain_names[i]); + if (ret) + goto fail; + } for (i = 0; i < ARRAY_SIZE(domain_deps); i++) { pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base, @@ -644,12 +655,21 @@ static int bcm2835_power_probe(struct platform_device *pdev) ret = devm_reset_controller_register(dev, &power->reset); if (ret) - return ret; + goto fail; of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate); dev_info(dev, "Broadcom BCM2835 power domains driver"); return 0; + +fail: + for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { + struct generic_pm_domain *dom = &power->domains[i].base; + + if (dom->gov) + pm_genpd_remove(dom); + } + return ret; } static int bcm2835_power_remove(struct platform_device *pdev) -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. @ 2019-02-13 0:33 ` Eric Anholt 0 siblings, 0 replies; 14+ messages in thread From: Eric Anholt @ 2019-02-13 0:33 UTC (permalink / raw) To: Florian Fainelli Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, Stefan Wahren, bcm-kernel-feedback-list, Eric Anholt The clock driver may probe after ours and so we need to pass the -EPROBE_DEFER out. Fix the other error path while we're here. Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") --- drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c index 4a1b99b773c0..11f9469423f7 100644 --- a/drivers/soc/bcm/bcm2835-power.c +++ b/drivers/soc/bcm/bcm2835-power.c @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) } } -static void +static int bcm2835_init_power_domain(struct bcm2835_power *power, int pd_xlate_index, const char *name) { @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; dom->clk = devm_clk_get(dev->parent, name); + if (IS_ERR(dom->clk)) { + int ret = PTR_ERR(dom->clk); + + if (ret == -EPROBE_DEFER) + return ret; + } dom->base.name = name; dom->base.power_on = bcm2835_power_pd_power_on; @@ -505,6 +511,8 @@ bcm2835_init_power_domain(struct bcm2835_power *power, pm_genpd_init(&dom->base, NULL, true); power->pd_xlate.domains[pd_xlate_index] = &dom->base; + + return 0; } /** bcm2835_reset_reset - Resets a block that has a reset line in the @@ -602,7 +610,7 @@ static int bcm2835_power_probe(struct platform_device *pdev) { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 }, { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 }, }; - int ret, i; + int ret = 0, i; u32 id; power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL); @@ -629,8 +637,11 @@ static int bcm2835_power_probe(struct platform_device *pdev) power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names); - for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) - bcm2835_init_power_domain(power, i, power_domain_names[i]); + for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { + ret = bcm2835_init_power_domain(power, i, power_domain_names[i]); + if (ret) + goto fail; + } for (i = 0; i < ARRAY_SIZE(domain_deps); i++) { pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base, @@ -644,12 +655,21 @@ static int bcm2835_power_probe(struct platform_device *pdev) ret = devm_reset_controller_register(dev, &power->reset); if (ret) - return ret; + goto fail; of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate); dev_info(dev, "Broadcom BCM2835 power domains driver"); return 0; + +fail: + for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) { + struct generic_pm_domain *dom = &power->domains[i].base; + + if (dom->gov) + pm_genpd_remove(dom); + } + return ret; } static int bcm2835_power_remove(struct platform_device *pdev) -- 2.20.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. 2019-02-13 0:33 ` Eric Anholt @ 2019-02-13 8:46 ` Stefan Wahren -1 siblings, 0 replies; 14+ messages in thread From: Stefan Wahren @ 2019-02-13 8:46 UTC (permalink / raw) To: Eric Anholt, Florian Fainelli Cc: bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel, linux-kernel Hi Eric, Am 13.02.19 um 01:33 schrieb Eric Anholt: > The clock driver may probe after ours and so we need to pass the > -EPROBE_DEFER out. Fix the other error path while we're here. > > Signed-off-by: Eric Anholt <eric@anholt.net> > Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") > --- > drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- > 1 file changed, 25 insertions(+), 5 deletions(-) > > diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c > index 4a1b99b773c0..11f9469423f7 100644 > --- a/drivers/soc/bcm/bcm2835-power.c > +++ b/drivers/soc/bcm/bcm2835-power.c > @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) > } > } > > -static void > +static int > bcm2835_init_power_domain(struct bcm2835_power *power, > int pd_xlate_index, const char *name) > { > @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, > struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; > > dom->clk = devm_clk_get(dev->parent, name); > + if (IS_ERR(dom->clk)) { > + int ret = PTR_ERR(dom->clk); > + > + if (ret == -EPROBE_DEFER) > + return ret; is it safe to proceed in the other error cases? Even it would be more consistent with clk_prepare_enable() to print an error here. > + } > > Thanks Stefan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. @ 2019-02-13 8:46 ` Stefan Wahren 0 siblings, 0 replies; 14+ messages in thread From: Stefan Wahren @ 2019-02-13 8:46 UTC (permalink / raw) To: Eric Anholt, Florian Fainelli Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list Hi Eric, Am 13.02.19 um 01:33 schrieb Eric Anholt: > The clock driver may probe after ours and so we need to pass the > -EPROBE_DEFER out. Fix the other error path while we're here. > > Signed-off-by: Eric Anholt <eric@anholt.net> > Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") > --- > drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- > 1 file changed, 25 insertions(+), 5 deletions(-) > > diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c > index 4a1b99b773c0..11f9469423f7 100644 > --- a/drivers/soc/bcm/bcm2835-power.c > +++ b/drivers/soc/bcm/bcm2835-power.c > @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) > } > } > > -static void > +static int > bcm2835_init_power_domain(struct bcm2835_power *power, > int pd_xlate_index, const char *name) > { > @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, > struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; > > dom->clk = devm_clk_get(dev->parent, name); > + if (IS_ERR(dom->clk)) { > + int ret = PTR_ERR(dom->clk); > + > + if (ret == -EPROBE_DEFER) > + return ret; is it safe to proceed in the other error cases? Even it would be more consistent with clk_prepare_enable() to print an error here. > + } > > Thanks Stefan ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. 2019-02-13 8:46 ` Stefan Wahren @ 2019-02-13 18:28 ` Eric Anholt -1 siblings, 0 replies; 14+ messages in thread From: Eric Anholt @ 2019-02-13 18:28 UTC (permalink / raw) To: Stefan Wahren, Florian Fainelli Cc: bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel, linux-kernel [-- Attachment #1.1: Type: text/plain, Size: 1611 bytes --] Stefan Wahren <stefan.wahren@i2se.com> writes: > Hi Eric, > > Am 13.02.19 um 01:33 schrieb Eric Anholt: >> The clock driver may probe after ours and so we need to pass the >> -EPROBE_DEFER out. Fix the other error path while we're here. >> >> Signed-off-by: Eric Anholt <eric@anholt.net> >> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") >> --- >> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- >> 1 file changed, 25 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c >> index 4a1b99b773c0..11f9469423f7 100644 >> --- a/drivers/soc/bcm/bcm2835-power.c >> +++ b/drivers/soc/bcm/bcm2835-power.c >> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) >> } >> } >> >> -static void >> +static int >> bcm2835_init_power_domain(struct bcm2835_power *power, >> int pd_xlate_index, const char *name) >> { >> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, >> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; >> >> dom->clk = devm_clk_get(dev->parent, name); >> + if (IS_ERR(dom->clk)) { >> + int ret = PTR_ERR(dom->clk); >> + >> + if (ret == -EPROBE_DEFER) >> + return ret; > is it safe to proceed in the other error cases? > Even it would be more consistent with clk_prepare_enable() to print an > error here. Yes, not all domains have a clk, so we want to ignore the other error. And we shouldn't print for defers, generally. [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. @ 2019-02-13 18:28 ` Eric Anholt 0 siblings, 0 replies; 14+ messages in thread From: Eric Anholt @ 2019-02-13 18:28 UTC (permalink / raw) To: Stefan Wahren, Florian Fainelli Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list [-- Attachment #1: Type: text/plain, Size: 1611 bytes --] Stefan Wahren <stefan.wahren@i2se.com> writes: > Hi Eric, > > Am 13.02.19 um 01:33 schrieb Eric Anholt: >> The clock driver may probe after ours and so we need to pass the >> -EPROBE_DEFER out. Fix the other error path while we're here. >> >> Signed-off-by: Eric Anholt <eric@anholt.net> >> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") >> --- >> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- >> 1 file changed, 25 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c >> index 4a1b99b773c0..11f9469423f7 100644 >> --- a/drivers/soc/bcm/bcm2835-power.c >> +++ b/drivers/soc/bcm/bcm2835-power.c >> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) >> } >> } >> >> -static void >> +static int >> bcm2835_init_power_domain(struct bcm2835_power *power, >> int pd_xlate_index, const char *name) >> { >> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, >> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; >> >> dom->clk = devm_clk_get(dev->parent, name); >> + if (IS_ERR(dom->clk)) { >> + int ret = PTR_ERR(dom->clk); >> + >> + if (ret == -EPROBE_DEFER) >> + return ret; > is it safe to proceed in the other error cases? > Even it would be more consistent with clk_prepare_enable() to print an > error here. Yes, not all domains have a clk, so we want to ignore the other error. And we shouldn't print for defers, generally. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. 2019-02-13 18:28 ` Eric Anholt @ 2019-02-13 22:33 ` Stefan Wahren -1 siblings, 0 replies; 14+ messages in thread From: Stefan Wahren @ 2019-02-13 22:33 UTC (permalink / raw) To: Eric Anholt, Florian Fainelli Cc: bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel, linux-kernel > Eric Anholt <eric@anholt.net> hat am 13. Februar 2019 um 19:28 geschrieben: > > > Stefan Wahren <stefan.wahren@i2se.com> writes: > > > Hi Eric, > > > > Am 13.02.19 um 01:33 schrieb Eric Anholt: > >> The clock driver may probe after ours and so we need to pass the > >> -EPROBE_DEFER out. Fix the other error path while we're here. > >> > >> Signed-off-by: Eric Anholt <eric@anholt.net> > >> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") > >> --- > >> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- > >> 1 file changed, 25 insertions(+), 5 deletions(-) > >> > >> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c > >> index 4a1b99b773c0..11f9469423f7 100644 > >> --- a/drivers/soc/bcm/bcm2835-power.c > >> +++ b/drivers/soc/bcm/bcm2835-power.c > >> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) > >> } > >> } > >> > >> -static void > >> +static int > >> bcm2835_init_power_domain(struct bcm2835_power *power, > >> int pd_xlate_index, const char *name) > >> { > >> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, > >> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; > >> > >> dom->clk = devm_clk_get(dev->parent, name); > >> + if (IS_ERR(dom->clk)) { > >> + int ret = PTR_ERR(dom->clk); > >> + > >> + if (ret == -EPROBE_DEFER) > >> + return ret; > > is it safe to proceed in the other error cases? > > Even it would be more consistent with clk_prepare_enable() to print an > > error here. > > Yes, not all domains have a clk, so we want to ignore the other error. But shouldn't we set dom->clk to NULL instead of keeping the error pointer? AFAIK clk_prepare_enable is aware of NULL instead of error pointer. > And we shouldn't print for defers, generally. Sure, i wanted to refer to all the other error cases. Stefan _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. @ 2019-02-13 22:33 ` Stefan Wahren 0 siblings, 0 replies; 14+ messages in thread From: Stefan Wahren @ 2019-02-13 22:33 UTC (permalink / raw) To: Eric Anholt, Florian Fainelli Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list > Eric Anholt <eric@anholt.net> hat am 13. Februar 2019 um 19:28 geschrieben: > > > Stefan Wahren <stefan.wahren@i2se.com> writes: > > > Hi Eric, > > > > Am 13.02.19 um 01:33 schrieb Eric Anholt: > >> The clock driver may probe after ours and so we need to pass the > >> -EPROBE_DEFER out. Fix the other error path while we're here. > >> > >> Signed-off-by: Eric Anholt <eric@anholt.net> > >> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") > >> --- > >> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- > >> 1 file changed, 25 insertions(+), 5 deletions(-) > >> > >> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c > >> index 4a1b99b773c0..11f9469423f7 100644 > >> --- a/drivers/soc/bcm/bcm2835-power.c > >> +++ b/drivers/soc/bcm/bcm2835-power.c > >> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) > >> } > >> } > >> > >> -static void > >> +static int > >> bcm2835_init_power_domain(struct bcm2835_power *power, > >> int pd_xlate_index, const char *name) > >> { > >> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, > >> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; > >> > >> dom->clk = devm_clk_get(dev->parent, name); > >> + if (IS_ERR(dom->clk)) { > >> + int ret = PTR_ERR(dom->clk); > >> + > >> + if (ret == -EPROBE_DEFER) > >> + return ret; > > is it safe to proceed in the other error cases? > > Even it would be more consistent with clk_prepare_enable() to print an > > error here. > > Yes, not all domains have a clk, so we want to ignore the other error. But shouldn't we set dom->clk to NULL instead of keeping the error pointer? AFAIK clk_prepare_enable is aware of NULL instead of error pointer. > And we shouldn't print for defers, generally. Sure, i wanted to refer to all the other error cases. Stefan ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. 2019-02-13 22:33 ` Stefan Wahren @ 2019-02-15 19:29 ` Florian Fainelli -1 siblings, 0 replies; 14+ messages in thread From: Florian Fainelli @ 2019-02-15 19:29 UTC (permalink / raw) To: Stefan Wahren, Eric Anholt, Florian Fainelli Cc: bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel, linux-kernel On 2/13/19 2:33 PM, Stefan Wahren wrote: > >> Eric Anholt <eric@anholt.net> hat am 13. Februar 2019 um 19:28 geschrieben: >> >> >> Stefan Wahren <stefan.wahren@i2se.com> writes: >> >>> Hi Eric, >>> >>> Am 13.02.19 um 01:33 schrieb Eric Anholt: >>>> The clock driver may probe after ours and so we need to pass the >>>> -EPROBE_DEFER out. Fix the other error path while we're here. >>>> >>>> Signed-off-by: Eric Anholt <eric@anholt.net> >>>> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") >>>> --- >>>> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- >>>> 1 file changed, 25 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c >>>> index 4a1b99b773c0..11f9469423f7 100644 >>>> --- a/drivers/soc/bcm/bcm2835-power.c >>>> +++ b/drivers/soc/bcm/bcm2835-power.c >>>> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) >>>> } >>>> } >>>> >>>> -static void >>>> +static int >>>> bcm2835_init_power_domain(struct bcm2835_power *power, >>>> int pd_xlate_index, const char *name) >>>> { >>>> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, >>>> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; >>>> >>>> dom->clk = devm_clk_get(dev->parent, name); >>>> + if (IS_ERR(dom->clk)) { >>>> + int ret = PTR_ERR(dom->clk); >>>> + >>>> + if (ret == -EPROBE_DEFER) >>>> + return ret; >>> is it safe to proceed in the other error cases? >>> Even it would be more consistent with clk_prepare_enable() to print an >>> error here. >> >> Yes, not all domains have a clk, so we want to ignore the other error. > > But shouldn't we set dom->clk to NULL instead of keeping the error pointer? AFAIK clk_prepare_enable is aware of NULL instead of error pointer. If the clock is really optional, then yes, this should be the way to go. -- Florian _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. @ 2019-02-15 19:29 ` Florian Fainelli 0 siblings, 0 replies; 14+ messages in thread From: Florian Fainelli @ 2019-02-15 19:29 UTC (permalink / raw) To: Stefan Wahren, Eric Anholt, Florian Fainelli Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list On 2/13/19 2:33 PM, Stefan Wahren wrote: > >> Eric Anholt <eric@anholt.net> hat am 13. Februar 2019 um 19:28 geschrieben: >> >> >> Stefan Wahren <stefan.wahren@i2se.com> writes: >> >>> Hi Eric, >>> >>> Am 13.02.19 um 01:33 schrieb Eric Anholt: >>>> The clock driver may probe after ours and so we need to pass the >>>> -EPROBE_DEFER out. Fix the other error path while we're here. >>>> >>>> Signed-off-by: Eric Anholt <eric@anholt.net> >>>> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") >>>> --- >>>> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- >>>> 1 file changed, 25 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c >>>> index 4a1b99b773c0..11f9469423f7 100644 >>>> --- a/drivers/soc/bcm/bcm2835-power.c >>>> +++ b/drivers/soc/bcm/bcm2835-power.c >>>> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) >>>> } >>>> } >>>> >>>> -static void >>>> +static int >>>> bcm2835_init_power_domain(struct bcm2835_power *power, >>>> int pd_xlate_index, const char *name) >>>> { >>>> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, >>>> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; >>>> >>>> dom->clk = devm_clk_get(dev->parent, name); >>>> + if (IS_ERR(dom->clk)) { >>>> + int ret = PTR_ERR(dom->clk); >>>> + >>>> + if (ret == -EPROBE_DEFER) >>>> + return ret; >>> is it safe to proceed in the other error cases? >>> Even it would be more consistent with clk_prepare_enable() to print an >>> error here. >> >> Yes, not all domains have a clk, so we want to ignore the other error. > > But shouldn't we set dom->clk to NULL instead of keeping the error pointer? AFAIK clk_prepare_enable is aware of NULL instead of error pointer. If the clock is really optional, then yes, this should be the way to go. -- Florian ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. 2019-02-15 19:29 ` Florian Fainelli @ 2019-02-20 18:18 ` Eric Anholt -1 siblings, 0 replies; 14+ messages in thread From: Eric Anholt @ 2019-02-20 18:18 UTC (permalink / raw) To: Florian Fainelli, Stefan Wahren, Florian Fainelli Cc: bcm-kernel-feedback-list, linux-rpi-kernel, linux-arm-kernel, linux-kernel [-- Attachment #1.1: Type: text/plain, Size: 2167 bytes --] Florian Fainelli <f.fainelli@gmail.com> writes: > On 2/13/19 2:33 PM, Stefan Wahren wrote: >> >>> Eric Anholt <eric@anholt.net> hat am 13. Februar 2019 um 19:28 geschrieben: >>> >>> >>> Stefan Wahren <stefan.wahren@i2se.com> writes: >>> >>>> Hi Eric, >>>> >>>> Am 13.02.19 um 01:33 schrieb Eric Anholt: >>>>> The clock driver may probe after ours and so we need to pass the >>>>> -EPROBE_DEFER out. Fix the other error path while we're here. >>>>> >>>>> Signed-off-by: Eric Anholt <eric@anholt.net> >>>>> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") >>>>> --- >>>>> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- >>>>> 1 file changed, 25 insertions(+), 5 deletions(-) >>>>> >>>>> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c >>>>> index 4a1b99b773c0..11f9469423f7 100644 >>>>> --- a/drivers/soc/bcm/bcm2835-power.c >>>>> +++ b/drivers/soc/bcm/bcm2835-power.c >>>>> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) >>>>> } >>>>> } >>>>> >>>>> -static void >>>>> +static int >>>>> bcm2835_init_power_domain(struct bcm2835_power *power, >>>>> int pd_xlate_index, const char *name) >>>>> { >>>>> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, >>>>> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; >>>>> >>>>> dom->clk = devm_clk_get(dev->parent, name); >>>>> + if (IS_ERR(dom->clk)) { >>>>> + int ret = PTR_ERR(dom->clk); >>>>> + >>>>> + if (ret == -EPROBE_DEFER) >>>>> + return ret; >>>> is it safe to proceed in the other error cases? >>>> Even it would be more consistent with clk_prepare_enable() to print an >>>> error here. >>> >>> Yes, not all domains have a clk, so we want to ignore the other error. >> >> But shouldn't we set dom->clk to NULL instead of keeping the error >> pointer? AFAIK clk_prepare_enable is aware of NULL instead of error >> pointer. > > If the clock is really optional, then yes, this should be the way to go. Sigh, error pointers. Fixed, sending a v2. [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization. @ 2019-02-20 18:18 ` Eric Anholt 0 siblings, 0 replies; 14+ messages in thread From: Eric Anholt @ 2019-02-20 18:18 UTC (permalink / raw) To: Florian Fainelli, Stefan Wahren, Florian Fainelli Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel, bcm-kernel-feedback-list [-- Attachment #1: Type: text/plain, Size: 2167 bytes --] Florian Fainelli <f.fainelli@gmail.com> writes: > On 2/13/19 2:33 PM, Stefan Wahren wrote: >> >>> Eric Anholt <eric@anholt.net> hat am 13. Februar 2019 um 19:28 geschrieben: >>> >>> >>> Stefan Wahren <stefan.wahren@i2se.com> writes: >>> >>>> Hi Eric, >>>> >>>> Am 13.02.19 um 01:33 schrieb Eric Anholt: >>>>> The clock driver may probe after ours and so we need to pass the >>>>> -EPROBE_DEFER out. Fix the other error path while we're here. >>>>> >>>>> Signed-off-by: Eric Anholt <eric@anholt.net> >>>>> Fixes: 670c672608a1 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.") >>>>> --- >>>>> drivers/soc/bcm/bcm2835-power.c | 30 +++++++++++++++++++++++++----- >>>>> 1 file changed, 25 insertions(+), 5 deletions(-) >>>>> >>>>> diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c >>>>> index 4a1b99b773c0..11f9469423f7 100644 >>>>> --- a/drivers/soc/bcm/bcm2835-power.c >>>>> +++ b/drivers/soc/bcm/bcm2835-power.c >>>>> @@ -485,7 +485,7 @@ static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain) >>>>> } >>>>> } >>>>> >>>>> -static void >>>>> +static int >>>>> bcm2835_init_power_domain(struct bcm2835_power *power, >>>>> int pd_xlate_index, const char *name) >>>>> { >>>>> @@ -493,6 +493,12 @@ bcm2835_init_power_domain(struct bcm2835_power *power, >>>>> struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index]; >>>>> >>>>> dom->clk = devm_clk_get(dev->parent, name); >>>>> + if (IS_ERR(dom->clk)) { >>>>> + int ret = PTR_ERR(dom->clk); >>>>> + >>>>> + if (ret == -EPROBE_DEFER) >>>>> + return ret; >>>> is it safe to proceed in the other error cases? >>>> Even it would be more consistent with clk_prepare_enable() to print an >>>> error here. >>> >>> Yes, not all domains have a clk, so we want to ignore the other error. >> >> But shouldn't we set dom->clk to NULL instead of keeping the error >> pointer? AFAIK clk_prepare_enable is aware of NULL instead of error >> pointer. > > If the clock is really optional, then yes, this should be the way to go. Sigh, error pointers. Fixed, sending a v2. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 832 bytes --] ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-02-20 18:19 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-02-13 0:33 [PATCH 1/2] soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support Eric Anholt 2019-02-13 0:33 ` Eric Anholt 2019-02-13 0:33 ` [PATCH 2/2] soc: bcm: bcm2835-pm: Fix error paths of initialization Eric Anholt 2019-02-13 0:33 ` Eric Anholt 2019-02-13 8:46 ` Stefan Wahren 2019-02-13 8:46 ` Stefan Wahren 2019-02-13 18:28 ` Eric Anholt 2019-02-13 18:28 ` Eric Anholt 2019-02-13 22:33 ` Stefan Wahren 2019-02-13 22:33 ` Stefan Wahren 2019-02-15 19:29 ` Florian Fainelli 2019-02-15 19:29 ` Florian Fainelli 2019-02-20 18:18 ` Eric Anholt 2019-02-20 18:18 ` Eric Anholt
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.