From: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
To: Javier Martin <javier.martin@vista-silicon.com>
Cc: linux-crypto@vger.kernel.org, swarren@nvidia.com,
herbert@gondor.apana.org.au, arnd@arndb.de,
linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org,
kernel@pengutronix.de, shawn.guo@linaro.org, davem@davemloft.net,
linux-arm-kernel@lists.infradead.org, gcembed@gmail.com
Subject: Re: [PATCH v2 2/3] crypto: sahara: Add driver for SAHARA2 accelerator.
Date: Thu, 28 Feb 2013 12:07:48 +0100 [thread overview]
Message-ID: <87vc9chf23.fsf@lebrac.rtp-net.org> (raw)
In-Reply-To: <1361961711-4603-3-git-send-email-javier.martin@vista-silicon.com> (Javier Martin's message of "Wed, 27 Feb 2013 11:41:50 +0100")
[-- Attachment #1: Type: text/plain, Size: 1426 bytes --]
Javier Martin <javier.martin@vista-silicon.com> writes:
Hi,
> SAHARA2 HW module is included in the i.MX27 SoC from
> Freescale. It is capable of performing cipher algorithms
> such as AES, 3DES..., hashing and RNG too.
The rmmod oops is gone with this version, thanks.
>
> This driver provides support for AES-CBC and AES-ECB
> by now.
>
> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
> ---
> drivers/crypto/Kconfig | 10 +
> drivers/crypto/Makefile | 1 +
> drivers/crypto/sahara.c | 1070 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1081 insertions(+)
> create mode 100644 drivers/crypto/sahara.c
>
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 87ec4d0..7d73f5a 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -276,6 +276,16 @@ config CRYPTO_DEV_PICOXCELL
>
> Saying m here will build a module named pipcoxcell_crypto.
>
> +config CRYPTO_DEV_SAHARA
> + tristate "Support for SAHARA crypto accelerator"
> + depends on MACH_MX27 && EXPERIMENTAL && OF
maybe switch to ARCH_MXC instead of MAC_MX27 ?
[...]
> +static struct platform_driver sahara_driver = {
> + .probe = sahara_probe,
> + .remove = __devexit_p(sahara_remove),
Please remove the __devexit_p too.
For information, you'll find below what I've changed to test the driver on my
imx51. It's not perfect but it's enough for testing things.
Arnaud
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: imx51-sahara.patch --]
[-- Type: text/x-diff, Size: 5482 bytes --]
Index: sascha-new/Documentation/devicetree/bindings/clock/imx5-clock.txt
===================================================================
--- sascha-new.orig/Documentation/devicetree/bindings/clock/imx5-clock.txt 2013-02-27 22:30:39.000000000 +0100
+++ sascha-new/Documentation/devicetree/bindings/clock/imx5-clock.txt 2013-02-27 22:36:07.007547186 +0100
@@ -173,6 +173,7 @@ clocks and IDs.
can1_ipg_gate 158
srtc_gate 159
pata_gate 160
+ sahara_gate 161
Examples (for mx53):
Index: sascha-new/arch/arm/boot/dts/imx51-genesi-efika-sb.dts
===================================================================
--- sascha-new.orig/arch/arm/boot/dts/imx51-genesi-efika-sb.dts 2013-02-27 22:30:39.000000000 +0100
+++ sascha-new/arch/arm/boot/dts/imx51-genesi-efika-sb.dts 2013-02-27 22:36:07.043547182 +0100
@@ -399,3 +399,6 @@
status = "okay";
};
+&sahara {
+ status = "okay";
+};
Index: sascha-new/arch/arm/boot/dts/imx51.dtsi
===================================================================
--- sascha-new.orig/arch/arm/boot/dts/imx51.dtsi 2013-02-27 22:30:39.000000000 +0100
+++ sascha-new/arch/arm/boot/dts/imx51.dtsi 2013-02-27 22:36:07.071547182 +0100
@@ -678,6 +678,15 @@
clock-names = "per", "ahb";
status = "disabled";
};
+
+ sahara: sahara@83ff8000 {
+ compatible = "fsl,imx51-sahara";
+ reg = <0x83ff8000 0x4000>;
+ interrupts = <19>;
+ clocks = <&clks 161>, <&clks 0>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
};
};
};
Index: sascha-new/arch/arm/mach-imx/clk-imx51-imx53.c
===================================================================
--- sascha-new.orig/arch/arm/mach-imx/clk-imx51-imx53.c 2013-02-27 22:30:39.000000000 +0100
+++ sascha-new/arch/arm/mach-imx/clk-imx51-imx53.c 2013-02-27 22:36:07.015547183 +0100
@@ -83,6 +83,7 @@ enum imx5_clks {
ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
can_sel, can1_serial_gate, can1_ipg_gate, srtc_gate, pata_gate,
+ sahara_gate,
clk_max
};
@@ -346,6 +347,7 @@ int __init mx51_clocks_init(unsigned lon
clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
+ clk[sahara_gate] = imx_clk_gate2("sahara_gate", "ipg", MXC_CCM_CCGR4, 14);
for (i = 0; i < ARRAY_SIZE(clk); i++)
if (IS_ERR(clk[i]))
Index: sascha-new/drivers/crypto/Kconfig
===================================================================
--- sascha-new.orig/drivers/crypto/Kconfig 2013-02-27 22:30:59.000000000 +0100
+++ sascha-new/drivers/crypto/Kconfig 2013-02-27 22:36:07.079547182 +0100
@@ -278,7 +278,7 @@ config CRYPTO_DEV_PICOXCELL
config CRYPTO_DEV_SAHARA
tristate "Support for SAHARA crypto accelerator"
- depends on MACH_MX27 && EXPERIMENTAL && OF
+ depends on ARCH_MXC && EXPERIMENTAL && OF
select CRYPTO_BLKCIPHER
select CRYPTO_AES
select CRYPTO_ECB
Index: sascha-new/drivers/crypto/sahara.c
===================================================================
--- sascha-new.orig/drivers/crypto/sahara.c 2013-02-27 22:30:59.000000000 +0100
+++ sascha-new/drivers/crypto/sahara.c 2013-02-27 22:45:40.359521961 +0100
@@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#define SAHARA_NAME "sahara"
@@ -859,14 +860,30 @@ static struct platform_device_id sahara_
};
MODULE_DEVICE_TABLE(platform, sahara_platform_ids);
+struct sahara_data {
+ int version;
+};
+
+static struct sahara_data sahara_data_v3 = {
+ .version = 3,
+};
+
+static struct sahara_data sahara_data_v4 = {
+ .version = 4,
+};
+
static struct of_device_id sahara_dt_ids[] = {
- { .compatible = "fsl,imx27-sahara" },
+ { .compatible = "fsl,imx51-sahara", .data = &sahara_data_v4, },
+ { .compatible = "fsl,imx27-sahara", .data = &sahara_data_v3, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, sahara_dt_ids);
static int sahara_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(sahara_dt_ids, &pdev->dev);
+ const struct sahara_data *data;
struct sahara_dev *dev;
struct resource *res;
u32 version;
@@ -982,10 +999,13 @@ static int sahara_probe(struct platform_
clk_prepare_enable(dev->clk_ipg);
clk_prepare_enable(dev->clk_ahb);
+ data = of_id->data;
+
version = sahara_read(dev, SAHARA_REG_VERSION);
- if (version != SAHARA_VERSION_3) {
- dev_err(&pdev->dev, "SAHARA version %d not supported\n",
- version);
+ /* sahara 4 version nr is not encoded in the same way as 2/3 */
+ if ((version != data->version) && (((version >> 8) & 0xff) != data->version)) {
+ dev_err(&pdev->dev, "SAHARA version %d not supported (wanted %d)\n",
+ version, data->version);
err = -ENODEV;
goto err_algs;
}
@@ -1002,7 +1022,7 @@ static int sahara_probe(struct platform_
if (err)
goto err_algs;
- dev_info(&pdev->dev, "SAHARA version %d initialized\n", version);
+ dev_info(&pdev->dev, "SAHARA version %d initialized\n", data->version);
return 0;
@@ -1054,7 +1074,7 @@ static int sahara_remove(struct platform
static struct platform_driver sahara_driver = {
.probe = sahara_probe,
- .remove = __devexit_p(sahara_remove),
+ .remove = sahara_remove,
.driver = {
.name = SAHARA_NAME,
.owner = THIS_MODULE,
WARNING: multiple messages have this Message-ID (diff)
From: arnaud.patard@rtp-net.org (Arnaud Patard (Rtp))
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] crypto: sahara: Add driver for SAHARA2 accelerator.
Date: Thu, 28 Feb 2013 12:07:48 +0100 [thread overview]
Message-ID: <87vc9chf23.fsf@lebrac.rtp-net.org> (raw)
In-Reply-To: <1361961711-4603-3-git-send-email-javier.martin@vista-silicon.com> (Javier Martin's message of "Wed, 27 Feb 2013 11:41:50 +0100")
Javier Martin <javier.martin@vista-silicon.com> writes:
Hi,
> SAHARA2 HW module is included in the i.MX27 SoC from
> Freescale. It is capable of performing cipher algorithms
> such as AES, 3DES..., hashing and RNG too.
The rmmod oops is gone with this version, thanks.
>
> This driver provides support for AES-CBC and AES-ECB
> by now.
>
> Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
> ---
> drivers/crypto/Kconfig | 10 +
> drivers/crypto/Makefile | 1 +
> drivers/crypto/sahara.c | 1070 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1081 insertions(+)
> create mode 100644 drivers/crypto/sahara.c
>
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 87ec4d0..7d73f5a 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -276,6 +276,16 @@ config CRYPTO_DEV_PICOXCELL
>
> Saying m here will build a module named pipcoxcell_crypto.
>
> +config CRYPTO_DEV_SAHARA
> + tristate "Support for SAHARA crypto accelerator"
> + depends on MACH_MX27 && EXPERIMENTAL && OF
maybe switch to ARCH_MXC instead of MAC_MX27 ?
[...]
> +static struct platform_driver sahara_driver = {
> + .probe = sahara_probe,
> + .remove = __devexit_p(sahara_remove),
Please remove the __devexit_p too.
For information, you'll find below what I've changed to test the driver on my
imx51. It's not perfect but it's enough for testing things.
Arnaud
-------------- next part --------------
A non-text attachment was scrubbed...
Name: imx51-sahara.patch
Type: text/x-diff
Size: 5482 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130228/ba3ba53a/attachment-0001.bin>
next prev parent reply other threads:[~2013-02-28 11:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-27 10:41 [PATCH v2 0/3] crypto: sahara: Add support for SAHARA in i.MX27 Javier Martin
2013-02-27 10:41 ` Javier Martin
2013-02-27 10:41 ` [PATCH v2 1/3] i.MX27: Add clock support for SAHARA2 Javier Martin
2013-02-27 10:41 ` Javier Martin
2013-02-27 10:41 ` [PATCH v2 2/3] crypto: sahara: Add driver for SAHARA2 accelerator Javier Martin
2013-02-27 10:41 ` Javier Martin
2013-02-27 10:47 ` Arnd Bergmann
2013-02-27 10:47 ` Arnd Bergmann
2013-02-28 11:07 ` Arnaud Patard [this message]
2013-02-28 11:07 ` Arnaud Patard (Rtp)
2013-02-28 14:08 ` javier Martin
2013-02-28 14:08 ` javier Martin
2013-03-01 7:28 ` Arnaud Patard
2013-03-01 7:28 ` Arnaud Patard (Rtp)
2013-02-27 10:41 ` [PATCH v2 3/3] crypto: sahara: Add device tree binding for SAHARA2 Javier Martin
2013-02-27 10:41 ` Javier Martin
2013-02-27 20:05 ` Sascha Hauer
2013-02-27 20:05 ` Sascha Hauer
2013-02-28 7:51 ` javier Martin
2013-02-28 7:51 ` javier Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87vc9chf23.fsf@lebrac.rtp-net.org \
--to=arnaud.patard@rtp-net.org \
--cc=arnd@arndb.de \
--cc=davem@davemloft.net \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=gcembed@gmail.com \
--cc=herbert@gondor.apana.org.au \
--cc=javier.martin@vista-silicon.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=shawn.guo@linaro.org \
--cc=swarren@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.