From: "Bjørn Mork" <bjorn@mork.no>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless@vger.kernel.org,
wireless-regdb@lists.infradead.org,
"Robert Grønning" <slimg@iggu.org>
Subject: Re: [wireless-regdb] wireless-regdb: Update regulatory rules for Norway (NO)
Date: Tue, 07 Feb 2012 21:41:31 +0100 [thread overview]
Message-ID: <87vcni74w4.fsf@nemi.mork.no> (raw)
In-Reply-To: <20120207195415.GG5560@tuxdriver.com> (John W. Linville's message of "Tue, 7 Feb 2012 14:54:15 -0500")
"John W. Linville" <linville@tuxdriver.com> writes:
> Well, sorry for the delay... I will take this silence as "no
> objection". :-)
>
> Bjørn, could you give me a "Signed-off-by" line as well?
Sure. Is this sufficient, or do you need the patch resent with it
included?
Signed-off-by: Bjørn Mork <bjorn@mork.no>
> On Mon, Nov 28, 2011 at 01:19:12PM -0500, John W. Linville wrote:
>> Any comments from the regulatory experts in the group?
>>
>> On Tue, Nov 22, 2011 at 03:13:22PM +0100, Bjørn Mork wrote:
>> > As mentioned by Robert Grønning <slimg at iggu.org> in June, Norway does
>> > allow a few more bands than what's currently in the database. In
>> > particular, the old ISM band at 5725 - 5875 MHz is and has "always" been
>> > allowed.
>> >
>> > The regulations [1] have some weird restrictions wrt power densities etc
>> > which I have no idea how to describe in a format suitable for the db.
>> > I've tried my best to make sure the entries are within the rules.
>> >
>> > The regulations also allow up to 1 W eirp in the band 5470 - 5725 MHz,
>> > and up to 4 W eirp in the bands 5725 - 5795 MHz and 5815 - 5850 MHz if
>> > TPC is in use. The limits are reduced by 3dB without TPC. As I don't
>> > know how to express the TPC requirement, I've chosen to put the reduced
>> > limits (500 mW and 2 W) in the db entries. This also matches the German
>> > (DE) entry for 5470 - 5725 MHz, so I guess it must make some sense...
>> >
>> > I also have no idea which SI prefixes you allow in the database, so I've
>> > used whatever was in the regulations. Please adjust as needed if only
>> > mW or dB is acceptable. Or let me know and I'll provide an updated patch.
>> >
>> >
>> > Patch attached.
>> >
>> >
>> >
>> >
>> > References:
>> >
>> > [1] Current Norwegian regulations:
>> > http://www.lovdata.no/cgi-wift/ldles?doc=/sf/sf/sf-20090602-0580.html
>> >
>> > [2] The Norwegian Post and Telecommunications Authority provides an unofficial english translation of these regulations:
>> > http://www.npt.no/ikbViewer/Content/103810/Regulations_concerning_general_authorisations_for_the_use_of_radio_frequencies.pdf
>> >
>> >
>> > [3] Appendix 1 of ERC/REC 70-03 provides generic information about licensing
>> > status for Short Range Devices (SRD) in most CEPT countries:
>> > http://www.ecodocdb.dk/doks/filedownload.aspx?fileid=1694&fileurl=http://www.erodocdb.dk/Docs/doc98/official/pdf/REC7003E.PDF
>> >
>> >
>> >
>> >
>> > Bjørn
>>
>> > diff --git a/db.txt b/db.txt
>> > index e63a43e..375187f 100644
>> > --- a/db.txt
>> > +++ b/db.txt
>> > @@ -469,11 +469,20 @@ country NL:
>> > (5250 - 5330 @ 40), (N/A, 20), DFS
>> > (5490 - 5710 @ 40), (N/A, 27), DFS
>> >
>> > +# Data from http://www.lovdata.no/cgi-wift/ldles?doc=/sf/sf/sf-20090602-0580.html
>> > country NO:
>> > - (2402 - 2482 @ 40), (N/A, 20)
>> > - (5170 - 5250 @ 40), (N/A, 20)
>> > - (5250 - 5330 @ 40), (N/A, 20), DFS
>> > - (5490 - 5710 @ 40), (N/A, 27), DFS
>> > + # § 7 (2)
>> > + (2400 - 2483.5 @ 40), (N/A, 100 mW)
>> > + # § 7 (3)
>> > + (5150 - 5350 @ 40), (N/A, 200 mW)
>> > + # § 7 (4)
>> > + (5470 - 5725 @ 40), (N/A, 500 mW), DFS
>> > + # § 7 (5)
>> > + (5725 - 5795 @ 40), (N/A, 2 W), DFS
>> > + (5815 - 5850 @ 40), (N/A, 2 W), DFS
>> > + # § 7 (6)
>> > + (5725 - 5795 @ 40), (23, 1 W), DFS, PTP-ONLY
>> > + (5815 - 5850 @ 40), (23, 1 W), DFS, PTP-ONLY
>> >
>> > country NP:
>> > (2402 - 2482 @ 40), (N/A, 20)
>>
>>
>> --
>> John W. Linville Someday the world will need a hero, and you
>> linville@tuxdriver.com might be all we have. Be ready.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
WARNING: multiple messages have this Message-ID (diff)
From: "Bjørn Mork" <bjorn@mork.no>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: wireless-regdb@lists.infradead.org,
linux-wireless@vger.kernel.org,
"Robert Grønning" <slimg@iggu.org>
Subject: Re: [wireless-regdb] wireless-regdb: Update regulatory rules for Norway (NO)
Date: Tue, 07 Feb 2012 21:41:31 +0100 [thread overview]
Message-ID: <87vcni74w4.fsf@nemi.mork.no> (raw)
In-Reply-To: <20120207195415.GG5560@tuxdriver.com> (John W. Linville's message of "Tue, 7 Feb 2012 14:54:15 -0500")
"John W. Linville" <linville@tuxdriver.com> writes:
> Well, sorry for the delay... I will take this silence as "no
> objection". :-)
>
> Bjørn, could you give me a "Signed-off-by" line as well?
Sure. Is this sufficient, or do you need the patch resent with it
included?
Signed-off-by: Bjørn Mork <bjorn@mork.no>
> On Mon, Nov 28, 2011 at 01:19:12PM -0500, John W. Linville wrote:
>> Any comments from the regulatory experts in the group?
>>
>> On Tue, Nov 22, 2011 at 03:13:22PM +0100, Bjørn Mork wrote:
>> > As mentioned by Robert Grønning <slimg at iggu.org> in June, Norway does
>> > allow a few more bands than what's currently in the database. In
>> > particular, the old ISM band at 5725 - 5875 MHz is and has "always" been
>> > allowed.
>> >
>> > The regulations [1] have some weird restrictions wrt power densities etc
>> > which I have no idea how to describe in a format suitable for the db.
>> > I've tried my best to make sure the entries are within the rules.
>> >
>> > The regulations also allow up to 1 W eirp in the band 5470 - 5725 MHz,
>> > and up to 4 W eirp in the bands 5725 - 5795 MHz and 5815 - 5850 MHz if
>> > TPC is in use. The limits are reduced by 3dB without TPC. As I don't
>> > know how to express the TPC requirement, I've chosen to put the reduced
>> > limits (500 mW and 2 W) in the db entries. This also matches the German
>> > (DE) entry for 5470 - 5725 MHz, so I guess it must make some sense...
>> >
>> > I also have no idea which SI prefixes you allow in the database, so I've
>> > used whatever was in the regulations. Please adjust as needed if only
>> > mW or dB is acceptable. Or let me know and I'll provide an updated patch.
>> >
>> >
>> > Patch attached.
>> >
>> >
>> >
>> >
>> > References:
>> >
>> > [1] Current Norwegian regulations:
>> > http://www.lovdata.no/cgi-wift/ldles?doc=/sf/sf/sf-20090602-0580.html
>> >
>> > [2] The Norwegian Post and Telecommunications Authority provides an unofficial english translation of these regulations:
>> > http://www.npt.no/ikbViewer/Content/103810/Regulations_concerning_general_authorisations_for_the_use_of_radio_frequencies.pdf
>> >
>> >
>> > [3] Appendix 1 of ERC/REC 70-03 provides generic information about licensing
>> > status for Short Range Devices (SRD) in most CEPT countries:
>> > http://www.ecodocdb.dk/doks/filedownload.aspx?fileid=1694&fileurl=http://www.erodocdb.dk/Docs/doc98/official/pdf/REC7003E.PDF
>> >
>> >
>> >
>> >
>> > Bjørn
>>
>> > diff --git a/db.txt b/db.txt
>> > index e63a43e..375187f 100644
>> > --- a/db.txt
>> > +++ b/db.txt
>> > @@ -469,11 +469,20 @@ country NL:
>> > (5250 - 5330 @ 40), (N/A, 20), DFS
>> > (5490 - 5710 @ 40), (N/A, 27), DFS
>> >
>> > +# Data from http://www.lovdata.no/cgi-wift/ldles?doc=/sf/sf/sf-20090602-0580.html
>> > country NO:
>> > - (2402 - 2482 @ 40), (N/A, 20)
>> > - (5170 - 5250 @ 40), (N/A, 20)
>> > - (5250 - 5330 @ 40), (N/A, 20), DFS
>> > - (5490 - 5710 @ 40), (N/A, 27), DFS
>> > + # § 7 (2)
>> > + (2400 - 2483.5 @ 40), (N/A, 100 mW)
>> > + # § 7 (3)
>> > + (5150 - 5350 @ 40), (N/A, 200 mW)
>> > + # § 7 (4)
>> > + (5470 - 5725 @ 40), (N/A, 500 mW), DFS
>> > + # § 7 (5)
>> > + (5725 - 5795 @ 40), (N/A, 2 W), DFS
>> > + (5815 - 5850 @ 40), (N/A, 2 W), DFS
>> > + # § 7 (6)
>> > + (5725 - 5795 @ 40), (23, 1 W), DFS, PTP-ONLY
>> > + (5815 - 5850 @ 40), (23, 1 W), DFS, PTP-ONLY
>> >
>> > country NP:
>> > (2402 - 2482 @ 40), (N/A, 20)
>>
>>
>> --
>> John W. Linville Someday the world will need a hero, and you
>> linville@tuxdriver.com might be all we have. Be ready.
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
_______________________________________________
wireless-regdb mailing list
wireless-regdb@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wireless-regdb
next prev parent reply other threads:[~2012-02-07 20:42 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-22 14:13 wireless-regdb: Update regulatory rules for Norway (NO) Bjørn Mork
2011-11-22 14:13 ` [wireless-regdb] " Bjørn Mork
2011-11-28 18:19 ` John W. Linville
2011-11-28 18:19 ` [wireless-regdb] " John W. Linville
2012-02-07 19:54 ` John W. Linville
2012-02-07 19:54 ` [wireless-regdb] " John W. Linville
2012-02-07 20:37 ` Luis R. Rodriguez
2012-02-07 20:37 ` Luis R. Rodriguez
2012-02-07 22:47 ` David Goodenough
2012-02-07 23:05 ` Luis R. Rodriguez
2012-02-07 23:05 ` Luis R. Rodriguez
2012-02-08 8:55 ` Bjørn Mork
2012-02-08 8:55 ` Bjørn Mork
2012-02-07 20:41 ` Bjørn Mork [this message]
2012-02-07 20:41 ` Bjørn Mork
2012-02-07 20:42 ` John W. Linville
2012-02-07 20:42 ` John W. Linville
-- strict thread matches above, loose matches on Subject: below --
2011-06-23 17:58 Robert Grønning
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87vcni74w4.fsf@nemi.mork.no \
--to=bjorn@mork.no \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=slimg@iggu.org \
--cc=wireless-regdb@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.