From: Michael Ellerman <mpe@ellerman.id.au>
To: Danny Tsen <dtsen@linux.ibm.com>, linux-crypto@vger.kernel.org
Cc: herbert@gondor.apana.org.au, leitao@debian.org,
nayna@linux.ibm.com, appro@cryptogams.org,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
ltcgcw@linux.vnet.ibm.com, dtsen@us.ibm.com,
Danny Tsen <dtsen@linux.ibm.com>
Subject: Re: [PATCH] Remove POWER10_CPU dependency and move PPC_MODULE_FEATURE_P10.
Date: Thu, 13 Apr 2023 23:12:22 +1000 [thread overview]
Message-ID: <87wn2g9b9l.fsf@mpe.ellerman.id.au> (raw)
In-Reply-To: <20230412181232.2051-1-dtsen@linux.ibm.com>
Danny Tsen <dtsen@linux.ibm.com> writes:
> Remove Power10 dependency in Kconfig and detect Power10 feature at runtime.
> Move PPC_MODULE_FEATURE_P10 definition to be in
> arch/powerpc/include/asm/cpufeature.h.
This should be two patches, one for the Kconfig change and one moving
the feature flag.
Also don't you need a cpu feature check in p10_init()? Otherwise the
driver can be loaded on non-P10 CPUs, either by being built-in, or
manually.
cheers
> Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
> ---
> arch/powerpc/crypto/Kconfig | 2 +-
> arch/powerpc/crypto/aes-gcm-p10-glue.c | 1 -
> arch/powerpc/include/asm/cpufeature.h | 1 +
> 3 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig
> index 1f8f02b494e1..7113f9355165 100644
> --- a/arch/powerpc/crypto/Kconfig
> +++ b/arch/powerpc/crypto/Kconfig
> @@ -96,7 +96,7 @@ config CRYPTO_AES_PPC_SPE
>
> config CRYPTO_AES_GCM_P10
> tristate "Stitched AES/GCM acceleration support on P10 or later CPU (PPC)"
> - depends on PPC64 && POWER10_CPU && CPU_LITTLE_ENDIAN
> + depends on PPC64 && CPU_LITTLE_ENDIAN
> select CRYPTO_LIB_AES
> select CRYPTO_ALGAPI
> select CRYPTO_AEAD
> diff --git a/arch/powerpc/crypto/aes-gcm-p10-glue.c b/arch/powerpc/crypto/aes-gcm-p10-glue.c
> index 1533c8cdd26f..bd3475f5348d 100644
> --- a/arch/powerpc/crypto/aes-gcm-p10-glue.c
> +++ b/arch/powerpc/crypto/aes-gcm-p10-glue.c
> @@ -22,7 +22,6 @@
> #include <linux/module.h>
> #include <linux/types.h>
>
> -#define PPC_MODULE_FEATURE_P10 (32 + ilog2(PPC_FEATURE2_ARCH_3_1))
> #define PPC_ALIGN 16
> #define GCM_IV_SIZE 12
>
> diff --git a/arch/powerpc/include/asm/cpufeature.h b/arch/powerpc/include/asm/cpufeature.h
> index f6f790a90367..2dcc66225e7f 100644
> --- a/arch/powerpc/include/asm/cpufeature.h
> +++ b/arch/powerpc/include/asm/cpufeature.h
> @@ -22,6 +22,7 @@
> */
>
> #define PPC_MODULE_FEATURE_VEC_CRYPTO (32 + ilog2(PPC_FEATURE2_VEC_CRYPTO))
> +#define PPC_MODULE_FEATURE_P10 (32 + ilog2(PPC_FEATURE2_ARCH_3_1))
>
> #define cpu_feature(x) (x)
>
> --
> 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Ellerman <mpe@ellerman.id.au>
To: Danny Tsen <dtsen@linux.ibm.com>, linux-crypto@vger.kernel.org
Cc: herbert@gondor.apana.org.au, dtsen@us.ibm.com,
nayna@linux.ibm.com, linux-kernel@vger.kernel.org,
Danny Tsen <dtsen@linux.ibm.com>,
appro@cryptogams.org, ltcgcw@linux.vnet.ibm.com,
leitao@debian.org, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH] Remove POWER10_CPU dependency and move PPC_MODULE_FEATURE_P10.
Date: Thu, 13 Apr 2023 23:12:22 +1000 [thread overview]
Message-ID: <87wn2g9b9l.fsf@mpe.ellerman.id.au> (raw)
In-Reply-To: <20230412181232.2051-1-dtsen@linux.ibm.com>
Danny Tsen <dtsen@linux.ibm.com> writes:
> Remove Power10 dependency in Kconfig and detect Power10 feature at runtime.
> Move PPC_MODULE_FEATURE_P10 definition to be in
> arch/powerpc/include/asm/cpufeature.h.
This should be two patches, one for the Kconfig change and one moving
the feature flag.
Also don't you need a cpu feature check in p10_init()? Otherwise the
driver can be loaded on non-P10 CPUs, either by being built-in, or
manually.
cheers
> Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
> ---
> arch/powerpc/crypto/Kconfig | 2 +-
> arch/powerpc/crypto/aes-gcm-p10-glue.c | 1 -
> arch/powerpc/include/asm/cpufeature.h | 1 +
> 3 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig
> index 1f8f02b494e1..7113f9355165 100644
> --- a/arch/powerpc/crypto/Kconfig
> +++ b/arch/powerpc/crypto/Kconfig
> @@ -96,7 +96,7 @@ config CRYPTO_AES_PPC_SPE
>
> config CRYPTO_AES_GCM_P10
> tristate "Stitched AES/GCM acceleration support on P10 or later CPU (PPC)"
> - depends on PPC64 && POWER10_CPU && CPU_LITTLE_ENDIAN
> + depends on PPC64 && CPU_LITTLE_ENDIAN
> select CRYPTO_LIB_AES
> select CRYPTO_ALGAPI
> select CRYPTO_AEAD
> diff --git a/arch/powerpc/crypto/aes-gcm-p10-glue.c b/arch/powerpc/crypto/aes-gcm-p10-glue.c
> index 1533c8cdd26f..bd3475f5348d 100644
> --- a/arch/powerpc/crypto/aes-gcm-p10-glue.c
> +++ b/arch/powerpc/crypto/aes-gcm-p10-glue.c
> @@ -22,7 +22,6 @@
> #include <linux/module.h>
> #include <linux/types.h>
>
> -#define PPC_MODULE_FEATURE_P10 (32 + ilog2(PPC_FEATURE2_ARCH_3_1))
> #define PPC_ALIGN 16
> #define GCM_IV_SIZE 12
>
> diff --git a/arch/powerpc/include/asm/cpufeature.h b/arch/powerpc/include/asm/cpufeature.h
> index f6f790a90367..2dcc66225e7f 100644
> --- a/arch/powerpc/include/asm/cpufeature.h
> +++ b/arch/powerpc/include/asm/cpufeature.h
> @@ -22,6 +22,7 @@
> */
>
> #define PPC_MODULE_FEATURE_VEC_CRYPTO (32 + ilog2(PPC_FEATURE2_VEC_CRYPTO))
> +#define PPC_MODULE_FEATURE_P10 (32 + ilog2(PPC_FEATURE2_ARCH_3_1))
>
> #define cpu_feature(x) (x)
>
> --
> 2.31.1
next prev parent reply other threads:[~2023-04-13 13:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-12 18:12 [PATCH] Remove POWER10_CPU dependency and move PPC_MODULE_FEATURE_P10 Danny Tsen
2023-04-12 18:12 ` Danny Tsen
2023-04-13 13:12 ` Michael Ellerman [this message]
2023-04-13 13:12 ` Michael Ellerman
2023-04-13 13:18 ` Danny Tsen
2023-04-13 13:18 ` Danny Tsen
2023-04-13 13:46 ` Danny Tsen
2023-04-13 13:46 ` Danny Tsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wn2g9b9l.fsf@mpe.ellerman.id.au \
--to=mpe@ellerman.id.au \
--cc=appro@cryptogams.org \
--cc=dtsen@linux.ibm.com \
--cc=dtsen@us.ibm.com \
--cc=herbert@gondor.apana.org.au \
--cc=leitao@debian.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=ltcgcw@linux.vnet.ibm.com \
--cc=nayna@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.