From: Marc Zyngier <maz@kernel.org>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Sagar Kadam <sagar.kadam@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v2 2/2] irqchip/sifive-plic: Add support for Renesas RZ/Five SoC
Date: Sun, 26 Jun 2022 09:57:00 +0100 [thread overview]
Message-ID: <87wnd3erab.wl-maz@kernel.org> (raw)
In-Reply-To: <20220626004326.8548-3-prabhakar.mahadev-lad.rj@bp.renesas.com>
On Sun, 26 Jun 2022 01:43:26 +0100,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> The Renesas RZ/Five SoC has a RISC-V AX45MP AndesCore with NCEPLIC100. The
> NCEPLIC100 supports both edge-triggered and level-triggered interrupts. In
> case of edge-triggered interrupts NCEPLIC100 ignores the next interrupt
> edge until the previous completion message has been received and
> NCEPLIC100 doesn't support pending interrupt counter, hence losing the
> interrupts if not acknowledged in time.
>
> So the workaround for edge-triggered interrupts to be handled correctly
> and without losing is that it needs to be acknowledged first and then
> handler must be run so that we don't miss on the next edge-triggered
> interrupt.
>
> This patch adds a new compatible string for Renesas RZ/Five SoC and adds
> support to change interrupt flow based on the interrupt type. It also
> implements irq_ack and irq_set_type callbacks.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2:
> * Implemented IRQ flow as suggested by Marc
>
> RFC-->v1:
> * Fixed review comments pointed by Geert
> * Dropped handle_fasteoi_ack_irq support as for the PLIC we need to
> claim the interrupt by reading the register and then acknowledge it.
> * Add a new chained handler for RZ/Five SoC.
> ---
> drivers/irqchip/Kconfig | 1 +
> drivers/irqchip/irq-sifive-plic.c | 73 ++++++++++++++++++++++++++++++-
> 2 files changed, 72 insertions(+), 2 deletions(-)
[...]
>
> +static int plic_irq_set_type(struct irq_data *d, unsigned int type)
> +{
> + struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
> +
> + if (handler->priv->of_data != RENESAS_R9A07G043_PLIC)
> + return 0;
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_set_chip_handler_name_locked(d, &renesas_rzfive_edge_plic_chip,
> + handle_fasteoi_ack_irq,
> + "Edge");
> + break;
> +
> + case IRQ_TYPE_EDGE_RISING:
> + irq_set_chip_handler_name_locked(d, &plic_chip,
> + handle_fasteoi_irq,
> + "Level");
> + break;
Really? Have you even tested this?
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> irq_hw_number_t hwirq)
> {
> @@ -198,6 +248,19 @@ static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> return 0;
> }
>
> +static int plic_irq_domain_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + struct plic_priv *priv = d->host_data;
> +
> + if (priv->of_data == RENESAS_R9A07G043_PLIC)
> + return irq_domain_translate_twocell(d, fwspec, hwirq, type);
> +
> + return irq_domain_translate_onecell(d, fwspec, hwirq, type);
> +}
> +
> static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int nr_irqs, void *arg)
> {
> @@ -206,7 +269,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int type;
> struct irq_fwspec *fwspec = arg;
>
> - ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
> + ret = plic_irq_domain_translate(domain, fwspec, &hwirq, &type);
> if (ret)
> return ret;
>
> @@ -220,7 +283,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> }
>
> static const struct irq_domain_ops plic_irqdomain_ops = {
> - .translate = irq_domain_translate_onecell,
> + .translate = plic_irq_domain_translate,
> .alloc = plic_irq_domain_alloc,
> .free = irq_domain_free_irqs_top,
> };
> @@ -293,6 +356,11 @@ static int __init plic_init(struct device_node *node,
> if (!priv)
> return -ENOMEM;
>
> + if (of_device_is_compatible(node, "renesas,r9a07g043-plic")) {
> + priv->of_data = RENESAS_R9A07G043_PLIC;
> + plic_chip.name = "Renesas RZ/Five PLIC";
NAK. The irq_chip structure isn't the place for platform marketing.
This is way too long anyway (and same for the edge version), and you
even sent me a patch to make that structure const...
M.
--
Without deviation from the norm, progress is not possible.
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Marc Zyngier <maz@kernel.org>
To: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Sagar Kadam <sagar.kadam@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>
Subject: Re: [PATCH v2 2/2] irqchip/sifive-plic: Add support for Renesas RZ/Five SoC
Date: Sun, 26 Jun 2022 09:57:00 +0100 [thread overview]
Message-ID: <87wnd3erab.wl-maz@kernel.org> (raw)
In-Reply-To: <20220626004326.8548-3-prabhakar.mahadev-lad.rj@bp.renesas.com>
On Sun, 26 Jun 2022 01:43:26 +0100,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
>
> The Renesas RZ/Five SoC has a RISC-V AX45MP AndesCore with NCEPLIC100. The
> NCEPLIC100 supports both edge-triggered and level-triggered interrupts. In
> case of edge-triggered interrupts NCEPLIC100 ignores the next interrupt
> edge until the previous completion message has been received and
> NCEPLIC100 doesn't support pending interrupt counter, hence losing the
> interrupts if not acknowledged in time.
>
> So the workaround for edge-triggered interrupts to be handled correctly
> and without losing is that it needs to be acknowledged first and then
> handler must be run so that we don't miss on the next edge-triggered
> interrupt.
>
> This patch adds a new compatible string for Renesas RZ/Five SoC and adds
> support to change interrupt flow based on the interrupt type. It also
> implements irq_ack and irq_set_type callbacks.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> v1->v2:
> * Implemented IRQ flow as suggested by Marc
>
> RFC-->v1:
> * Fixed review comments pointed by Geert
> * Dropped handle_fasteoi_ack_irq support as for the PLIC we need to
> claim the interrupt by reading the register and then acknowledge it.
> * Add a new chained handler for RZ/Five SoC.
> ---
> drivers/irqchip/Kconfig | 1 +
> drivers/irqchip/irq-sifive-plic.c | 73 ++++++++++++++++++++++++++++++-
> 2 files changed, 72 insertions(+), 2 deletions(-)
[...]
>
> +static int plic_irq_set_type(struct irq_data *d, unsigned int type)
> +{
> + struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
> +
> + if (handler->priv->of_data != RENESAS_R9A07G043_PLIC)
> + return 0;
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_set_chip_handler_name_locked(d, &renesas_rzfive_edge_plic_chip,
> + handle_fasteoi_ack_irq,
> + "Edge");
> + break;
> +
> + case IRQ_TYPE_EDGE_RISING:
> + irq_set_chip_handler_name_locked(d, &plic_chip,
> + handle_fasteoi_irq,
> + "Level");
> + break;
Really? Have you even tested this?
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> irq_hw_number_t hwirq)
> {
> @@ -198,6 +248,19 @@ static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> return 0;
> }
>
> +static int plic_irq_domain_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + struct plic_priv *priv = d->host_data;
> +
> + if (priv->of_data == RENESAS_R9A07G043_PLIC)
> + return irq_domain_translate_twocell(d, fwspec, hwirq, type);
> +
> + return irq_domain_translate_onecell(d, fwspec, hwirq, type);
> +}
> +
> static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int nr_irqs, void *arg)
> {
> @@ -206,7 +269,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int type;
> struct irq_fwspec *fwspec = arg;
>
> - ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
> + ret = plic_irq_domain_translate(domain, fwspec, &hwirq, &type);
> if (ret)
> return ret;
>
> @@ -220,7 +283,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> }
>
> static const struct irq_domain_ops plic_irqdomain_ops = {
> - .translate = irq_domain_translate_onecell,
> + .translate = plic_irq_domain_translate,
> .alloc = plic_irq_domain_alloc,
> .free = irq_domain_free_irqs_top,
> };
> @@ -293,6 +356,11 @@ static int __init plic_init(struct device_node *node,
> if (!priv)
> return -ENOMEM;
>
> + if (of_device_is_compatible(node, "renesas,r9a07g043-plic")) {
> + priv->of_data = RENESAS_R9A07G043_PLIC;
> + plic_chip.name = "Renesas RZ/Five PLIC";
NAK. The irq_chip structure isn't the place for platform marketing.
This is way too long anyway (and same for the edge version), and you
even sent me a patch to make that structure const...
M.
--
Without deviation from the norm, progress is not possible.
next prev parent reply other threads:[~2022-06-26 8:57 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-26 0:43 [PATCH v2 0/2] Add PLIC support for Renesas RZ/Five SoC Lad Prabhakar
2022-06-26 0:43 ` Lad Prabhakar
2022-06-26 0:43 ` [PATCH v2 1/2] dt-bindings: interrupt-controller: sifive,plic: Document " Lad Prabhakar
2022-06-26 0:43 ` Lad Prabhakar
2022-06-26 12:35 ` Marc Zyngier
2022-06-26 12:35 ` Marc Zyngier
2022-06-27 12:27 ` Lad, Prabhakar
2022-06-27 12:27 ` Lad, Prabhakar
2022-06-27 14:22 ` Marc Zyngier
2022-06-27 14:22 ` Marc Zyngier
2022-06-27 14:29 ` Lad, Prabhakar
2022-06-27 14:29 ` Lad, Prabhakar
2022-06-26 0:43 ` [PATCH v2 2/2] irqchip/sifive-plic: Add support for " Lad Prabhakar
2022-06-26 0:43 ` Lad Prabhakar
2022-06-26 8:57 ` Marc Zyngier [this message]
2022-06-26 8:57 ` Marc Zyngier
2022-06-26 9:38 ` Lad, Prabhakar
2022-06-26 9:38 ` Lad, Prabhakar
2022-06-26 12:19 ` Marc Zyngier
2022-06-26 12:19 ` Marc Zyngier
2022-06-27 8:53 ` Geert Uytterhoeven
2022-06-27 8:53 ` Geert Uytterhoeven
2022-06-27 10:11 ` Marc Zyngier
2022-06-27 10:11 ` Marc Zyngier
2022-06-27 13:06 ` Lad, Prabhakar
2022-06-27 13:06 ` Lad, Prabhakar
2022-06-27 13:12 ` Geert Uytterhoeven
2022-06-27 13:12 ` Geert Uytterhoeven
2022-06-27 13:53 ` Marc Zyngier
2022-06-27 13:53 ` Marc Zyngier
2022-06-27 14:16 ` Lad, Prabhakar
2022-06-27 14:16 ` Lad, Prabhakar
2022-06-29 13:41 ` Pavel Machek
2022-06-29 13:41 ` Pavel Machek
2022-06-29 15:00 ` Marc Zyngier
2022-06-29 15:00 ` Marc Zyngier
2022-06-27 4:55 ` Samuel Holland
2022-06-27 4:55 ` Samuel Holland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wnd3erab.wl-maz@kernel.org \
--to=maz@kernel.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=prabhakar.csengg@gmail.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=sagar.kadam@sifive.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.