From: JJ Ding <jj_ding@emc.com.tw>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Seth Forshee <seth.forshee@canonical.com>,
Aaron Huang <aaron_huang@emc.com.tw>,
Tom Lin <tom_lin@emc.com.tw>, Eric Piel <E.A.B.Piel@tudelft.nl>,
Daniel Kurtz <djkurtz@chromium.org>,
Chase Douglas <chase.douglas@canonical.com>,
Henrik Rydberg <rydberg@euromail.se>,
Alessandro Rubini <rubini@cvml.unipv.it>
Subject: Re: [PATCH 3/6] Input: elantech - packet checking for v2 hardware
Date: Thu, 18 Aug 2011 15:31:27 +0800 [thread overview]
Message-ID: <87wreb2n1s.fsf@emc.com.tw> (raw)
In-Reply-To: <20110818063818.GC10093@core.coreip.homeip.net>
Hi Dmitry,
On Wed, 17 Aug 2011 23:38:18 -0700, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote:
> On Thu, Aug 18, 2011 at 09:57:06AM +0800, JJ Ding wrote:
> > For v2 hardware, there is no real parity check, but we can still check
> > some constant bits for data integrity.
> >
> > Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
> > ---
> > drivers/input/mouse/elantech.c | 26 +++++++++++++++++++++++---
> > 1 files changed, 23 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> > index cf41f23..032181c 100644
> > --- a/drivers/input/mouse/elantech.c
> > +++ b/drivers/input/mouse/elantech.c
> > @@ -376,6 +376,25 @@ static int elantech_check_parity_v1(struct psmouse *psmouse)
> > etd->parity[packet[3]] == p3;
> > }
> >
> > +static int packet_simple_check_v2(struct psmouse *psmouse)
> > +{
> > + struct elantech_data *etd = psmouse->private;
> > + unsigned char *packet = psmouse->packet;
> > +
> > + if (etd->reports_pressure)
> > + return (packet[0] & 0x0c) == 0x04 &&
> > + (packet[3] & 0x0f) == 0x02;
this is for newer v2 hardware
> > +
> > + if ((packet[0] & 0xc0) == 0x80)
> > + return (packet[0] & 0x0c) == 0x0c &&
> > + (packet[3] & 0x0e) == 0x08;
this is for older v2, two finger touch
> > +
> > + return (packet[0] & 0x3c) == 0x3c &&
> > + (packet[1] & 0xf0) == 0x00 &&
> > + (packet[3] & 0x3e) == 0x38 &&
> > + (packet[4] & 0xf0) == 0x00;
this is for older v2, 1/3 finger touch
>
> Can we please spell out the assumptions under which we decide that
> packet is invalid?
>
> Thanks.
>
> --
> Dmitry
V2 hardware has two flavors. Older ones that do not report pressure,
and newer ones that reports pressure and width.
With newer ones, all packets (1, 2, 3 finger touch) have the same
constant bits.
With older ones, 1/3 finger touch packets and 2 finger touch packets have
different constant bits.
With all three cases, if the constant bits are not exactly what I
expected, I consider them invalid.
Dmitry, how do you want me to improve this? not enough comments?
Thanks
jj
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-08-18 7:29 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-18 1:57 [PATCH 0/6] elantech: add support for newer generation hardware JJ Ding
2011-08-18 1:57 ` [PATCH 1/6] Input: elantech - correct x, y value range for v2 hardware JJ Ding
2011-08-19 12:20 ` Éric Piel
2011-08-19 12:20 ` Éric Piel
2011-08-18 1:57 ` [PATCH 2/6] Input: elantech - use firmware provided x, y ranges JJ Ding
2011-08-18 2:44 ` Daniel Kurtz
2011-08-18 7:47 ` Dmitry Torokhov
2011-08-19 9:47 ` JJ Ding
2011-08-19 12:19 ` Éric Piel
2011-08-19 12:19 ` Éric Piel
2011-09-01 18:26 ` Chase Douglas
2011-09-05 3:22 ` JJ Ding
2011-09-06 17:03 ` Chase Douglas
2011-09-06 17:36 ` Dmitry Torokhov
2011-09-06 18:05 ` Chase Douglas
2011-09-06 18:20 ` Dmitry Torokhov
2011-09-06 19:29 ` Chase Douglas
2011-09-07 2:33 ` Daniel Kurtz
2011-09-07 2:33 ` Daniel Kurtz
2011-09-06 18:47 ` Henrik Rydberg
2011-09-06 18:58 ` Chase Douglas
2011-08-18 1:57 ` [PATCH 3/6] Input: elantech - packet checking for v2 hardware JJ Ding
2011-08-18 2:49 ` Daniel Kurtz
2011-08-18 6:38 ` Dmitry Torokhov
2011-08-18 7:31 ` JJ Ding [this message]
2011-08-18 7:52 ` Dmitry Torokhov
2011-08-18 8:06 ` JJ Ding
2011-08-19 12:22 ` Éric Piel
2011-08-19 12:22 ` Éric Piel
2011-08-18 1:57 ` [PATCH 4/6] Input: elantech - work around EC buffer JJ Ding
2011-08-18 2:50 ` Daniel Kurtz
2011-08-18 3:07 ` Wanlong Gao
2011-08-18 6:48 ` JJ Ding
2011-08-18 6:54 ` Wanlong Gao
2011-08-18 6:39 ` Dmitry Torokhov
2011-08-18 6:54 ` JJ Ding
2011-08-18 1:57 ` [PATCH 5/6] Input: elantech - clean up elantech_init JJ Ding
2011-08-18 3:04 ` Daniel Kurtz
2011-08-18 3:08 ` Wanlong Gao
2011-08-18 5:35 ` JJ Ding
2011-08-18 5:38 ` Wanlong Gao
2011-08-18 6:00 ` Dmitry Torokhov
2011-08-18 7:44 ` JJ Ding
2011-08-18 6:34 ` Wanlong Gao
2011-08-19 12:29 ` Éric Piel
2011-08-19 12:29 ` Éric Piel
2011-08-18 1:57 ` [PATCH 6/6] Input: elantech - add v3 hardware support JJ Ding
2011-08-18 2:57 ` Daniel Kurtz
2011-08-18 3:04 ` Wanlong Gao
2011-08-18 3:09 ` Daniel Kurtz
2011-08-18 3:09 ` Daniel Kurtz
2011-08-18 3:22 ` Wanlong Gao
2011-08-18 5:39 ` JJ Ding
2011-08-18 3:01 ` Wanlong Gao
2011-08-18 5:26 ` JJ Ding
2011-08-18 5:31 ` Wanlong Gao
2011-08-18 5:34 ` Daniel Kurtz
2011-08-18 5:44 ` Wanlong Gao
2011-08-18 6:01 ` Daniel Kurtz
2011-08-18 6:01 ` Daniel Kurtz
2011-08-18 6:06 ` Wanlong Gao
2011-08-18 7:49 ` Tom _Lin
2011-08-18 3:30 ` Wanlong Gao
2011-08-18 3:47 ` Li Zefan
2011-08-18 4:15 ` Wanlong Gao
2011-08-18 6:02 ` Dmitry Torokhov
2011-08-18 6:08 ` Wanlong Gao
2011-08-18 13:58 ` Seth Forshee
2011-08-18 14:25 ` Seth Forshee
2011-08-18 14:25 ` Seth Forshee
2011-08-19 0:15 ` Wanlong Gao
2011-08-19 0:15 ` Wanlong Gao
2011-08-19 2:23 ` JJ Ding
2011-08-19 2:23 ` JJ Ding
2011-08-18 17:39 ` Seth Forshee
2011-08-19 8:29 ` JJ Ding
2011-08-19 12:13 ` Seth Forshee
2011-08-19 12:41 ` Éric Piel
2011-08-19 12:41 ` Éric Piel
2011-08-19 12:50 ` Seth Forshee
2011-08-19 12:50 ` Seth Forshee
2011-08-19 13:39 ` Éric Piel
2011-08-19 13:39 ` Éric Piel
2011-08-22 0:55 ` JJ Ding
2011-08-19 13:03 ` Éric Piel
2011-08-19 13:03 ` Éric Piel
2011-08-22 6:05 ` JJ Ding
2011-08-22 6:05 ` JJ Ding
2011-08-22 7:20 ` Tom _Lin
2011-08-22 7:20 ` Tom _Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wreb2n1s.fsf@emc.com.tw \
--to=jj_ding@emc.com.tw \
--cc=E.A.B.Piel@tudelft.nl \
--cc=aaron_huang@emc.com.tw \
--cc=chase.douglas@canonical.com \
--cc=djkurtz@chromium.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rubini@cvml.unipv.it \
--cc=rydberg@euromail.se \
--cc=seth.forshee@canonical.com \
--cc=tom_lin@emc.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.