From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2 8/8] drm/i915: Remove struct dp_link_dpll
Date: Wed, 09 Mar 2022 11:34:10 +0200 [thread overview]
Message-ID: <87y21jzcz1.fsf@intel.com> (raw)
In-Reply-To: <20220307233940.4161-9-ville.syrjala@linux.intel.com>
On Tue, 08 Mar 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> struct dp_link_dpll is a pointless wrapper around struct dpll.
> Just store the desired link rate into struct dpll::dot and
> we're done.
>
> v2: Document the full divider as a proper decimal number on chv
> Nuke bogus eDP 1.4 comments for chv while at it
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/g4x_dp.c | 55 +++++++++------------------
> 1 file changed, 17 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/g4x_dp.c b/drivers/gpu/drm/i915/display/g4x_dp.c
> index 22345051e667..8e1338678d91 100644
> --- a/drivers/gpu/drm/i915/display/g4x_dp.c
> +++ b/drivers/gpu/drm/i915/display/g4x_dp.c
> @@ -24,58 +24,37 @@
> #include "intel_pps.h"
> #include "vlv_sideband.h"
>
> -struct dp_link_dpll {
> - int clock;
> - struct dpll dpll;
> +static const struct dpll g4x_dpll[] = {
> + { .dot = 162000, .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8, },
> + { .dot = 270000, .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2, },
> };
>
> -static const struct dp_link_dpll g4x_dpll[] = {
> - { 162000,
> - { .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } },
> - { 270000,
> - { .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } }
> +static const struct dpll pch_dpll[] = {
> + { .dot = 162000, .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9, },
> + { .dot = 270000, .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8, },
> };
>
> -static const struct dp_link_dpll pch_dpll[] = {
> - { 162000,
> - { .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } },
> - { 270000,
> - { .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } }
> +static const struct dpll vlv_dpll[] = {
> + { .dot = 162000, .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81, },
> + { .dot = 270000, .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27, },
> };
>
> -static const struct dp_link_dpll vlv_dpll[] = {
> - { 162000,
> - { .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } },
> - { 270000,
> - { .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
> -};
> -
> -/*
> - * CHV supports eDP 1.4 that have more link rates.
> - * Below only provides the fixed rate but exclude variable rate.
> - */
> -static const struct dp_link_dpll chv_dpll[] = {
> - /*
> - * CHV requires to program fractional division for m2.
> - * m2 is stored in fixed point format using formula below
> - * (m2_int << 22) | m2_fraction
> - */
> - { 162000, /* m2_int = 32, m2_fraction = 1677722 */
> - { .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
> - { 270000, /* m2_int = 27, m2_fraction = 0 */
> - { .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
> +static const struct dpll chv_dpll[] = {
> + /* m2 is .22 binary fixed point */
> + { .dot = 162000, .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a /* 32.4 */ },
> + { .dot = 270000, .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 /* 27.0 */ },
> };
>
> const struct dpll *vlv_get_dpll(struct drm_i915_private *i915)
> {
> - return IS_CHERRYVIEW(i915) ? &chv_dpll[0].dpll : &vlv_dpll[0].dpll;
> + return IS_CHERRYVIEW(i915) ? &chv_dpll[0] : &vlv_dpll[0];
> }
>
> void g4x_dp_set_clock(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> - const struct dp_link_dpll *divisor = NULL;
> + const struct dpll *divisor = NULL;
> int i, count = 0;
>
> if (IS_G4X(dev_priv)) {
> @@ -94,8 +73,8 @@ void g4x_dp_set_clock(struct intel_encoder *encoder,
>
> if (divisor && count) {
> for (i = 0; i < count; i++) {
> - if (pipe_config->port_clock == divisor[i].clock) {
> - pipe_config->dpll = divisor[i].dpll;
> + if (pipe_config->port_clock == divisor[i].dot) {
> + pipe_config->dpll = divisor[i];
> pipe_config->clock_set = true;
> break;
> }
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2022-03-09 9:34 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-07 23:39 [Intel-gfx] [PATCH v2 0/8] drm/i915: Clean up some dpll stuff Ville Syrjala
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 1/8] drm/i915: Store the /5 target clock in struct dpll on vlv/chv Ville Syrjala
2022-03-09 9:53 ` Jani Nikula
2022-03-09 21:43 ` [Intel-gfx] [PATCH v3 " Ville Syrjala
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 2/8] drm/i915: Remove redundant/wrong comments Ville Syrjala
2022-03-09 9:50 ` Jani Nikula
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 3/8] drm/i915: Clean up bxt/glk PLL registers Ville Syrjala
2022-03-09 9:22 ` Jani Nikula
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 4/8] drm/i915: Store the m2 divider as a whole in bxt_clk_div Ville Syrjala
2022-03-09 9:27 ` Jani Nikula
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 5/8] drm/i915: Replace bxt_clk_div with struct dpll Ville Syrjala
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 6/8] drm/i915: Replace hand rolled bxt vco calculation with chv_calc_dpll_params() Ville Syrjala
2022-03-09 9:46 ` Jani Nikula
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 7/8] drm/i915: Populate bxt/glk DPLL clock limits a bit more Ville Syrjala
2022-03-09 9:30 ` Jani Nikula
2022-03-07 23:39 ` [Intel-gfx] [PATCH v2 8/8] drm/i915: Remove struct dp_link_dpll Ville Syrjala
2022-03-09 9:34 ` Jani Nikula [this message]
2022-03-07 23:50 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915: Clean up some dpll stuff (rev3) Patchwork
2022-03-08 13:31 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-03-09 2:48 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915: Clean up some dpll stuff (rev4) Patchwork
2022-03-09 3:22 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-03-09 18:23 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915: Clean up some dpll stuff (rev5) Patchwork
2022-03-09 18:59 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2022-03-09 22:02 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915: Clean up some dpll stuff (rev6) Patchwork
2022-03-09 22:35 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2022-03-10 7:29 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y21jzcz1.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.