ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP1300 specific BDFs

ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP1300 specific BDFs

[steven.lin]

[-- Attachment #1: Type: text/plain, Size: 1083 bytes --]

Hi,

The support for this device was added a while ago to OpenWrt. This AP requires 
two special BDFs to get the Wi-Fi PHYs working (correctly). The  bmi-board-
id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't 
provide special IDs for customers and seems to use the AP-DK board-ids in the 
wifi firmware to change its behavior.

Now to the questions from the wiki page [1]:

	description for what hardware this is:
-	it is a IPQ4018 based board
-	one QCA40xx radio is used as 2.4GHz radio
-	one QCA40xx radio is used as 5GHz radio

	origin of the board file (did you create it yourself or where you downloaded)
-	taken from stock firmware image

	ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
-	 QCA4019 hw1.0

md5sum of each new board file to add
+ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300'
md5sum: d7a7cb11fdb435380cb77a5a2d5c885d
+ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300'
md5sum: 3b286e4e6df83f1cb4a9241badd93961

Best regards,

Steven Lin

[-- Attachment #2: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #4: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: ath10k-firmware: QCA4019 hw1.0: Add EnGenius EAP1300 specific BDFs

[Kalle Valo]

<steven.lin@senao.com> writes:

> The support for this device was added a while ago to OpenWrt. This AP requires 
> two special BDFs to get the Wi-Fi PHYs working (correctly). The  bmi-board-
> id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't 
> provide special IDs for customers and seems to use the AP-DK board-ids in the 
> wifi firmware to change its behavior.
>
> Now to the questions from the wiki page [1]:
>
> 	description for what hardware this is:
> -	it is a IPQ4018 based board
> -	one QCA40xx radio is used as 2.4GHz radio
> -	one QCA40xx radio is used as 5GHz radio
>
> 	origin of the board file (did you create it yourself or where you downloaded)
> -	taken from stock firmware image
>
> 	ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
> -	 QCA4019 hw1.0
>
> md5sum of each new board file to add
> + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300'
> md5sum: d7a7cb11fdb435380cb77a5a2d5c885d
> + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300'
> md5sum: 3b286e4e6df83f1cb4a9241badd93961

Thanks, added to QCA4019/hw1.0/board-2.bin:

New:
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EAP1300
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EAP1300

Changed:


Deleted:

2 board image(s) added, 0 changed, 0 deleted, 39 in total

https://github.com/kvalo/ath10k-firmware/commit/9453e34e1689e13e919547c5f31f41e725c27f71

-- 
Kalle Valo

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k