All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Collins <paul@briny.ondioline.org>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev list <linuxppc-dev@ozlabs.org>,
	linuxppc64-dev <linuxppc64-dev@ozlabs.org>
Subject: Re: [PATCH] powerpc: Fix PowerMac sound i2c
Date: Sat, 04 Feb 2006 18:26:16 +0000	[thread overview]
Message-ID: <87y80rkmk7.fsf@briny.internal.ondioline.org> (raw)
In-Reply-To: <1136695956.30123.44.camel@localhost.localdomain> (Benjamin Herrenschmidt's message of "Sun, 08 Jan 2006 15:52:36 +1100")

Hi Ben,

Benjamin Herrenschmidt <benh@kernel.crashing.org> writes:

> My patch reworking the PowerMac i2c code break the sound drivers as they
> used to rely on some broken behaviour of i2c-keywest that is gone now.
> This patch should fix them (tested on a g5 with alsa only). It might
> also fix an oops if the alsa driver hits an unsupported chip.

Applied Linus's current git tree, this patch makes ALSA sound on my
PowerBook5,4 work again.  The second patch does not work because the
i2c wrapper (I assume that's what i2c_smbus_write_i2c_block_data is)
has apparently not yet returned.

It would be nice to have this fix in 2.6.16 if possible.

> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
>
> Index: linux-work/sound/ppc/tumbler.c
> ===================================================================
> --- linux-work.orig/sound/ppc/tumbler.c	2005-11-24 17:19:14.000000000 +1100
> +++ linux-work/sound/ppc/tumbler.c	2006-01-08 15:18:09.000000000 +1100
> @@ -137,6 +137,22 @@ static int send_init_client(pmac_keywest
>  	return 0;
>  }
>  
> +static int tumbler_write_block(struct i2c_client *client, u8 reg, int len,
> +			       u8 *values)
> +{
> +        union i2c_smbus_data data;
> +        int err;
> +
> +        data.block[0] = len;
> +	memcpy(&data.block[1], values, len);
> +        err = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
> +                             I2C_SMBUS_WRITE, reg, I2C_SMBUS_I2C_BLOCK_DATA,
> +                             &data);
> +        return err;
> +}
> +
> +
> +
>  
>  static int tumbler_init_client(pmac_keywest_t *i2c)
>  {
> @@ -239,8 +255,7 @@ static int tumbler_set_master_volume(pma
>  	block[4] = (right_vol >> 8)  & 0xff;
>  	block[5] = (right_vol >> 0)  & 0xff;
>    
> -	if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_VOL,
> -				       6, block) < 0) {
> +	if (tumbler_write_block(mix->i2c.client, TAS_REG_VOL, 6, block) < 0) {
>  		snd_printk("failed to set volume \n");
>  		return -EINVAL;
>  	}
> @@ -340,8 +355,7 @@ static int tumbler_set_drc(pmac_tumbler_
>  		val[1] = 0;
>  	}
>  
> -	if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
> -				       2, val) < 0) {
> +	if (tumbler_write_block(mix->i2c.client, TAS_REG_DRC, 2, val) < 0) {
>  		snd_printk("failed to set DRC\n");
>  		return -EINVAL;
>  	}
> @@ -376,8 +390,7 @@ static int snapper_set_drc(pmac_tumbler_
>  	val[4] = 0x60;
>  	val[5] = 0xa0;
>  
> -	if (i2c_smbus_write_block_data(mix->i2c.client, TAS_REG_DRC,
> -				       6, val) < 0) {
> +	if (tumbler_write_block(mix->i2c.client, TAS_REG_DRC, 6, val) < 0) {
>  		snd_printk("failed to set DRC\n");
>  		return -EINVAL;
>  	}
> @@ -481,8 +494,8 @@ static int tumbler_set_mono_volume(pmac_
>  	vol = info->table[vol];
>  	for (i = 0; i < info->bytes; i++)
>  		block[i] = (vol >> ((info->bytes - i - 1) * 8)) & 0xff;
> -	if (i2c_smbus_write_block_data(mix->i2c.client, info->reg,
> -				       info->bytes, block) < 0) {
> +	if (tumbler_write_block(mix->i2c.client, info->reg,
> +				  info->bytes, block) < 0) {
>  		snd_printk("failed to set mono volume %d\n", info->index);
>  		return -EINVAL;
>  	}
> @@ -611,7 +624,7 @@ static int snapper_set_mix_vol1(pmac_tum
>  		for (j = 0; j < 3; j++)
>  			block[i * 3 + j] = (vol >> ((2 - j) * 8)) & 0xff;
>  	}
> -	if (i2c_smbus_write_block_data(mix->i2c.client, reg, 9, block) < 0) {
> +	if (tumbler_write_block(mix->i2c.client, reg, 9, block) < 0) {
>  		snd_printk("failed to set mono volume %d\n", reg);
>  		return -EINVAL;
>  	}
> Index: linux-work/sound/oss/dmasound/tas_common.h
> ===================================================================
> --- linux-work.orig/sound/oss/dmasound/tas_common.h	2005-11-24 17:19:14.000000000 +1100
> +++ linux-work/sound/oss/dmasound/tas_common.h	2006-01-08 15:33:29.000000000 +1100
> @@ -157,6 +157,21 @@ tas_mono_to_stereo(uint mono)
>  	return mono | (mono<<8);
>  }
>  
> +static int tas_write_block(struct i2c_client *client, u8 reg, int len, u8 *vals)
> +{
> +        union i2c_smbus_data data;
> +        int err;
> +
> +        data.block[0] = len;
> +	memcpy(&data.block[1], vals, len);
> +        err = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
> +                             I2C_SMBUS_WRITE, reg, I2C_SMBUS_I2C_BLOCK_DATA,
> +                             &data);
> +        return err;
> +}
> +
> +
> +
>  /*
>   * Todo: make these functions a bit more efficient !
>   */
> @@ -178,10 +193,8 @@ tas_write_register(	struct tas_data_t *s
>  	if (write_mode & WRITE_SHADOW)
>  		memcpy(self->shadow[reg_num],data,reg_width);
>  	if (write_mode & WRITE_HW) {
> -		rc=i2c_smbus_write_block_data(self->client,
> -					      reg_num,
> -					      reg_width,
> -					      data);
> +		rc = tas_write_block(self->client, reg_num,
> +				     reg_width, data);
>  		if (rc < 0) {
>  			printk("tas: I2C block write failed \n");  
>  			return rc; 
> @@ -199,10 +212,8 @@ tas_sync_register(	struct tas_data_t *se
>  
>  	if (reg_width==0 || self==NULL)
>  		return -EINVAL;
> -	rc=i2c_smbus_write_block_data(self->client,
> -				      reg_num,
> -				      reg_width,
> -				      self->shadow[reg_num]);
> +	rc = tas_write_block(self->client, reg_num,
> +			     reg_width, self->shadow[reg_num]);
>  	if (rc < 0) {
>  		printk("tas: I2C block write failed \n");
>  		return rc;
> Index: linux-work/sound/ppc/pmac.c
> ===================================================================
> --- linux-work.orig/sound/ppc/pmac.c	2005-12-19 16:13:48.000000000 +1100
> +++ linux-work/sound/ppc/pmac.c	2006-01-08 15:37:10.000000000 +1100
> @@ -74,7 +74,7 @@ static int snd_pmac_dbdma_alloc(pmac_t *
>  
>  static void snd_pmac_dbdma_free(pmac_t *chip, pmac_dbdma_t *rec)
>  {
> -	if (rec) {
> +	if (rec->space) {
>  		unsigned int rsize = sizeof(struct dbdma_cmd) * (rec->size + 1);
>  
>  		dma_free_coherent(&chip->pdev->dev, rsize, rec->space, rec->dma_base);
> @@ -895,6 +895,7 @@ static int __init snd_pmac_detect(pmac_t
>  	chip->can_capture = 1;
>  	chip->num_freqs = ARRAY_SIZE(awacs_freqs);
>  	chip->freq_table = awacs_freqs;
> +	chip->pdev = NULL;
>  
>  	chip->control_mask = MASK_IEPC | MASK_IEE | 0x11; /* default */
>  

-- 
Dag vijandelijk luchtschip de huismeester is dood

  parent reply	other threads:[~2006-02-04 18:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-01-08  4:52 [PATCH] powerpc: Fix PowerMac sound i2c Benjamin Herrenschmidt
2006-01-08  4:55 ` Hollis Blanchard
2006-01-08  6:22   ` Benjamin Herrenschmidt
2006-01-08 23:37     ` Benjamin Herrenschmidt
2006-01-08 10:37 ` Andreas Schwab
2006-01-08 13:30   ` Andreas Schwab
2006-01-08 21:03   ` Benjamin Herrenschmidt
2006-02-04 18:26 ` Paul Collins [this message]
2006-02-04 22:56   ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87y80rkmk7.fsf@briny.internal.ondioline.org \
    --to=paul@briny.ondioline.org \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=linuxppc64-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.