Re: [PATCH v3 04/11] xen/arm/irq: add handling for IRQs in the eSPI range

[Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>]

Hi Leonid,

Leonid Komarianskyi <Leonid_Komarianskyi@epam.com> writes:

> Currently, Xen does not support eSPI interrupts, leading
> to a data abort when such interrupts are defined in the DTS.
>
> This patch introduces a separate array to initialize up to
> 1024 interrupt descriptors in the eSPI range and adds the
> necessary defines and helper function. These changes lay the
> groundwork for future implementation of full eSPI interrupt
> support. As this GICv3.1 feature is not required by all vendors,
> all changes are guarded by ifdefs, depending on the corresponding
> Kconfig option.
>
> Signed-off-by: Leonid Komarianskyi <leonid_komarianskyi@epam.com>

Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>

>
> ---
> Changes in V2:
> - use (ESPI_MAX_INTID + 1) instead of (ESPI_BASE_INTID + NR_IRQS)
> - remove unnecessary comment for nr_irqs initialization
>
> Changes in V3:
> - introduced a new define NR_ESPI_IRQS to avoid confusion, like in the
>   case of using NR_IRQS for espi_desc array
> - implemented helper functions espi_to_desc and init_espi_data to make
>   it possible to add stubs with the same name, and as a result, reduce
>   the number of #ifdefs
> - change CONFIG_GICV3_ESPI default value to n
> ---
>  xen/arch/arm/Kconfig           |  9 ++++++
>  xen/arch/arm/include/asm/irq.h | 26 +++++++++++++++++
>  xen/arch/arm/irq.c             | 52 +++++++++++++++++++++++++++++++++-
>  3 files changed, 86 insertions(+), 1 deletion(-)
>
> diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
> index 17df147b25..5813e5b267 100644
> --- a/xen/arch/arm/Kconfig
> +++ b/xen/arch/arm/Kconfig
> @@ -135,6 +135,15 @@ config GICV3
>  	  Driver for the ARM Generic Interrupt Controller v3.
>  	  If unsure, use the default setting.
>  
> +config GICV3_ESPI
> +	bool "Extended SPI range support"
> +	depends on GICV3 && !NEW_VGIC
> +	default n
> +	help
> +	  Allow Xen and domains to use interrupt numbers from the extended SPI
> +	  range, from 4096 to 5119. This feature is introduced in GICv3.1
> +	  architecture.
> +
>  config HAS_ITS
>          bool "GICv3 ITS MSI controller support (UNSUPPORTED)" if UNSUPPORTED
>          depends on GICV3 && !NEW_VGIC && !ARM_32
> diff --git a/xen/arch/arm/include/asm/irq.h b/xen/arch/arm/include/asm/irq.h
> index 5bc6475eb4..221dbf23a2 100644
> --- a/xen/arch/arm/include/asm/irq.h
> +++ b/xen/arch/arm/include/asm/irq.h
> @@ -32,6 +32,15 @@ struct arch_irq_desc {
>  #define SPI_MAX_INTID   1019
>  #define LPI_OFFSET      8192
>  
> +#ifdef CONFIG_GICV3_ESPI
> +#define ESPI_BASE_INTID 4096
> +#define ESPI_MAX_INTID  5119
> +#define NR_ESPI_IRQS    1024
> +
> +#define ESPI_INTID2IDX(intid) ((intid) - ESPI_BASE_INTID)
> +#define ESPI_IDX2INTID(idx)   ((idx) + ESPI_BASE_INTID)
> +#endif
> +
>  /* LPIs are always numbered starting at 8192, so 0 is a good invalid case. */
>  #define INVALID_LPI     0
>  
> @@ -39,7 +48,15 @@ struct arch_irq_desc {
>  #define INVALID_IRQ     1023
>  
>  extern const unsigned int nr_irqs;
> +#ifdef CONFIG_GICV3_ESPI
> +/*
> + * This will also cover the eSPI range, as some critical devices
> + * for booting Xen (e.g., serial) may use this type of interrupts.
> + */
> +#define nr_static_irqs (ESPI_MAX_INTID + 1)
> +#else
>  #define nr_static_irqs NR_IRQS
> +#endif
>  
>  struct irq_desc;
>  struct irqaction;
> @@ -55,6 +72,15 @@ static inline bool is_lpi(unsigned int irq)
>      return irq >= LPI_OFFSET;
>  }
>  
> +static inline bool is_espi(unsigned int irq)
> +{
> +#ifdef CONFIG_GICV3_ESPI
> +    return (irq >= ESPI_BASE_INTID && irq <= ESPI_MAX_INTID);
> +#else
> +    return false;
> +#endif
> +}
> +
>  #define domain_pirq_to_irq(d, pirq) (pirq)
>  
>  bool is_assignable_irq(unsigned int irq);
> diff --git a/xen/arch/arm/irq.c b/xen/arch/arm/irq.c
> index b8eccfc924..adb5e49ea3 100644
> --- a/xen/arch/arm/irq.c
> +++ b/xen/arch/arm/irq.c
> @@ -19,7 +19,11 @@
>  #include <asm/gic.h>
>  #include <asm/vgic.h>
>  
> +#ifdef CONFIG_GICV3_ESPI
> +const unsigned int nr_irqs = ESPI_MAX_INTID + 1;
> +#else
>  const unsigned int nr_irqs = NR_IRQS;
> +#endif
>  
>  static unsigned int local_irqs_type[NR_LOCAL_IRQS];
>  static DEFINE_SPINLOCK(local_irqs_type_lock);
> @@ -46,6 +50,49 @@ void irq_end_none(struct irq_desc *irq)
>  }
>  
>  static irq_desc_t irq_desc[NR_IRQS - NR_LOCAL_IRQS];
> +#ifdef CONFIG_GICV3_ESPI
> +static irq_desc_t espi_desc[NR_ESPI_IRQS];
> +
> +static struct irq_desc *espi_to_desc(unsigned int irq)
> +{
> +    return &espi_desc[ESPI_INTID2IDX(irq)];
> +}
> +
> +static int __init init_espi_data(void)
> +{
> +    int irq;
> +
> +    for ( irq = ESPI_BASE_INTID; irq <= ESPI_MAX_INTID; irq++ )
> +    {
> +        struct irq_desc *desc = irq_to_desc(irq);
> +        int rc = init_one_irq_desc(desc);
> +
> +        if ( rc )
> +            return rc;
> +
> +        desc->irq = irq;
> +        desc->action  = NULL;
> +    }
> +
> +    return 0;
> +}
> +#else
> +/*
> + * This function is stub and will not be called if CONFIG_GICV3_ESPI=n,
> + * because in this case, is_espi will always return false.
> + */
> +static struct irq_desc *espi_to_desc(unsigned int irq)
> +{
> +    ASSERT_UNREACHABLE();
> +    return NULL;
> +}
> +
> +static int __init init_espi_data(void)
> +{
> +    return 0;
> +}
> +#endif
> +
>  static DEFINE_PER_CPU(irq_desc_t[NR_LOCAL_IRQS], local_irq_desc);
>  
>  struct irq_desc *__irq_to_desc(unsigned int irq)
> @@ -53,6 +100,9 @@ struct irq_desc *__irq_to_desc(unsigned int irq)
>      if ( irq < NR_LOCAL_IRQS )
>          return &this_cpu(local_irq_desc)[irq];
>  
> +    if ( is_espi(irq) )
> +        return espi_to_desc(irq);
> +
>      return &irq_desc[irq-NR_LOCAL_IRQS];
>  }
>  
> @@ -79,7 +129,7 @@ static int __init init_irq_data(void)
>          desc->action  = NULL;
>      }
>  
> -    return 0;
> +    return init_espi_data();
>  }
>  
>  static int init_local_irq_data(unsigned int cpu)

-- 
WBR, Volodymyr