* ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform
@ 2023-08-28 13:38 ` Dmitry Baryshkov
0 siblings, 0 replies; 7+ messages in thread
From: Dmitry Baryshkov @ 2023-08-28 13:38 UTC (permalink / raw)
To: ath10k, open list:DRM DRIVER FOR MSM ADRENO GPU, Kalle Valo
Hello Kalle,
We'd like to ask for inclusion of the board file for the Qualcomm
SDM845 MTP board. It is a hardware development kit manufactured by
Qualcomm, using the Snapdragon SDM845 SoC and a variant of wcn3990
BT/WiFi chip.
Following the questions from the ath10k wiki page:
* description for what hardware this is
- It is SDM845-based platform
- It uses wcn3990 chip as a WiFi and BT radio
- For the reference:
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001
board_id 0x3f soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b
fw_build_timestamp 2018-07-19 12:28 fw_build_id
QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: failed to fetch board data for
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
from ath10k/WCN3990/hw1.0/board-2.bin
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features
wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file
max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
* origin of the board file
- This file comes from the firmware package provided by Thundercomm for
the RB3 platform (also sdm845-based), cross-checked to be the same as
the file provided together with the sdm845-mtp board.
* ids to be used with the board file
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
Note, the device comes with the board_id not changed from 0xff.
Following the example of existing boards we are adding the
calibration variant.
* md5sum of each new board file to add
$ md5sum *
c1f5ff1660cf6dcd74bff7b41c9e693f
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
$ sha256sum *
8b250ac1bea81825cc6f4a70105dea89b0952340a9c77a8ab37e99cbfa63e53d
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
--
With best wishes
Dmitry
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 7+ messages in thread
* ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform
@ 2023-08-28 13:38 ` Dmitry Baryshkov
0 siblings, 0 replies; 7+ messages in thread
From: Dmitry Baryshkov @ 2023-08-28 13:38 UTC (permalink / raw)
To: ath10k, open list:DRM DRIVER FOR MSM ADRENO GPU, Kalle Valo
Hello Kalle,
We'd like to ask for inclusion of the board file for the Qualcomm
SDM845 MTP board. It is a hardware development kit manufactured by
Qualcomm, using the Snapdragon SDM845 SoC and a variant of wcn3990
BT/WiFi chip.
Following the questions from the ath10k wiki page:
* description for what hardware this is
- It is SDM845-based platform
- It uses wcn3990 chip as a WiFi and BT radio
- For the reference:
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001
board_id 0x3f soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b
fw_build_timestamp 2018-07-19 12:28 fw_build_id
QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: failed to fetch board data for
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
from ath10k/WCN3990/hw1.0/board-2.bin
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features
wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file
max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
* origin of the board file
- This file comes from the firmware package provided by Thundercomm for
the RB3 platform (also sdm845-based), cross-checked to be the same as
the file provided together with the sdm845-mtp board.
* ids to be used with the board file
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
Note, the device comes with the board_id not changed from 0xff.
Following the example of existing boards we are adding the
calibration variant.
* md5sum of each new board file to add
$ md5sum *
c1f5ff1660cf6dcd74bff7b41c9e693f
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
$ sha256sum *
8b250ac1bea81825cc6f4a70105dea89b0952340a9c77a8ab37e99cbfa63e53d
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform
2023-08-28 13:38 ` Dmitry Baryshkov
(?)
@ 2023-12-07 14:59 ` Kalle Valo
2023-12-07 15:57 ` Dmitry Baryshkov
-1 siblings, 1 reply; 7+ messages in thread
From: Kalle Valo @ 2023-12-07 14:59 UTC (permalink / raw)
To: Dmitry Baryshkov; +Cc: ath10k, open list:DRM DRIVER FOR MSM ADRENO GPU
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes:
> We'd like to ask for inclusion of the board file for the Qualcomm
> SDM845 MTP board. It is a hardware development kit manufactured by
> Qualcomm, using the Snapdragon SDM845 SoC and a variant of wcn3990
> BT/WiFi chip.
>
> Following the questions from the ath10k wiki page:
>
> * description for what hardware this is
> - It is SDM845-based platform
> - It uses wcn3990 chip as a WiFi and BT radio
> - For the reference:
>
> ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001
> board_id 0x3f soc_id 0x40030001
> ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b
> fw_build_timestamp 2018-07-19 12:28 fw_build_id
> QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
> ath10k_snoc 18800000.wifi: failed to fetch board data for
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
> from ath10k/WCN3990/hw1.0/board-2.bin
> ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
> 0x00000000 sub 0000:0000
> ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
> ath10k_snoc 18800000.wifi: firmware ver api 5 features
> wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
> ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file
> max-sta 32 raw 0 hwcrypto 1
> ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
>
> * origin of the board file
> - This file comes from the firmware package provided by Thundercomm for
> the RB3 platform (also sdm845-based), cross-checked to be the same as
> the file provided together with the sdm845-mtp board.
>
> * ids to be used with the board file
>
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
>
> Note, the device comes with the board_id not changed from 0xff.
> Following the example of existing boards we are adding the
> calibration variant.
>
> * md5sum of each new board file to add
>
> $ md5sum *
> c1f5ff1660cf6dcd74bff7b41c9e693f
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
>
> $ sha256sum *
> 8b250ac1bea81825cc6f4a70105dea89b0952340a9c77a8ab37e99cbfa63e53d
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
I don't see any attachments, forgot to attach to it? Please resend the
whole file.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 7+ messages in thread
* ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform
@ 2023-12-07 15:56 Dmitry Baryshkov
2023-12-13 14:07 ` Kalle Valo
0 siblings, 1 reply; 7+ messages in thread
From: Dmitry Baryshkov @ 2023-12-07 15:56 UTC (permalink / raw)
To: ath10k, Kalle Valo
[-- Attachment #1: Type: text/plain, Size: 2101 bytes --]
Hello Kalle,
We'd like to ask for inclusion of the board file for the Qualcomm
SDM845 MTP board. It is a hardware development kit manufactured by
Qualcomm, using the Snapdragon SDM845 SoC and a variant of wcn3990
BT/WiFi chip.
Following the questions from the ath10k wiki page:
* description for what hardware this is
- It is SDM845-based platform
- It uses wcn3990 chip as a WiFi and BT radio
- For the reference:
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001
board_id 0x3f soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b
fw_build_timestamp 2018-07-19 12:28 fw_build_id
QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
ath10k_snoc 18800000.wifi: failed to fetch board data for
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
from ath10k/WCN3990/hw1.0/board-2.bin
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features
wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file
max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
* origin of the board file
- This file comes from the firmware package provided by Thundercomm for
the RB3 platform (also sdm845-based), cross-checked to be the same as
the file provided together with the sdm845-mtp board.
* ids to be used with the board file
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
Note, the device comes with the board_id not changed from 0xff.
Following the example of existing boards we are adding the
calibration variant.
* md5sum of each new board file to add
$ md5sum *
c1f5ff1660cf6dcd74bff7b41c9e693f
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
$ sha256sum *
8b250ac1bea81825cc6f4a70105dea89b0952340a9c77a8ab37e99cbfa63e53d
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
--
With best wishes
Dmitry
[-- Attachment #2: bdwlan.b3f --]
[-- Type: application/octet-stream, Size: 19152 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform
2023-12-07 14:59 ` Kalle Valo
@ 2023-12-07 15:57 ` Dmitry Baryshkov
0 siblings, 0 replies; 7+ messages in thread
From: Dmitry Baryshkov @ 2023-12-07 15:57 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k, open list:DRM DRIVER FOR MSM ADRENO GPU
On Thu, 7 Dec 2023 at 16:59, Kalle Valo <kvalo@kernel.org> wrote:
>
>
> I don't see any attachments, forgot to attach to it? Please resend the
> whole file.
Oops. Done.
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform
2023-12-07 15:56 ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform Dmitry Baryshkov
@ 2023-12-13 14:07 ` Kalle Valo
2023-12-13 14:11 ` Dmitry Baryshkov
0 siblings, 1 reply; 7+ messages in thread
From: Kalle Valo @ 2023-12-13 14:07 UTC (permalink / raw)
To: Dmitry Baryshkov; +Cc: ath10k
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes:
> We'd like to ask for inclusion of the board file for the Qualcomm
> SDM845 MTP board. It is a hardware development kit manufactured by
> Qualcomm, using the Snapdragon SDM845 SoC and a variant of wcn3990
> BT/WiFi chip.
>
> Following the questions from the ath10k wiki page:
>
> * description for what hardware this is
> - It is SDM845-based platform
> - It uses wcn3990 chip as a WiFi and BT radio
> - For the reference:
>
> ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001
> board_id 0x3f soc_id 0x40030001
> ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b
> fw_build_timestamp 2018-07-19 12:28 fw_build_id
> QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
> ath10k_snoc 18800000.wifi: failed to fetch board data for
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
> from ath10k/WCN3990/hw1.0/board-2.bin
> ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
> 0x00000000 sub 0000:0000
> ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
> ath10k_snoc 18800000.wifi: firmware ver api 5 features
> wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
> ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file
> max-sta 32 raw 0 hwcrypto 1
> ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
>
> * origin of the board file
> - This file comes from the firmware package provided by Thundercomm for
> the RB3 platform (also sdm845-based), cross-checked to be the same as
> the file provided together with the sdm845-mtp board.
>
> * ids to be used with the board file
>
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
>
> Note, the device comes with the board_id not changed from 0xff.
> Following the example of existing boards we are adding the
> calibration variant.
>
> * md5sum of each new board file to add
>
> $ md5sum *
> c1f5ff1660cf6dcd74bff7b41c9e693f
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
>
> $ sha256sum *
> 8b250ac1bea81825cc6f4a70105dea89b0952340a9c77a8ab37e99cbfa63e53d
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
Thanks. The attachment filename was wrong so I added it manually, please
check:
https://github.com/kvalo/ath10k-firmware/commit/77c5345a8420d002de9ee6b7180d465f94535186
New:
bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
Changed:
Deleted:
1 board image(s) added, 0 changed, 0 deleted, 27 in total
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform
2023-12-13 14:07 ` Kalle Valo
@ 2023-12-13 14:11 ` Dmitry Baryshkov
0 siblings, 0 replies; 7+ messages in thread
From: Dmitry Baryshkov @ 2023-12-13 14:11 UTC (permalink / raw)
To: Kalle Valo; +Cc: ath10k
On Wed, 13 Dec 2023 at 16:07, Kalle Valo <kvalo@kernel.org> wrote:
>
> Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes:
>
> > We'd like to ask for inclusion of the board file for the Qualcomm
> > SDM845 MTP board. It is a hardware development kit manufactured by
> > Qualcomm, using the Snapdragon SDM845 SoC and a variant of wcn3990
> > BT/WiFi chip.
> >
> > Following the questions from the ath10k wiki page:
> >
> > * description for what hardware this is
> > - It is SDM845-based platform
> > - It uses wcn3990 chip as a WiFi and BT radio
> > - For the reference:
> >
> > ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001
> > board_id 0x3f soc_id 0x40030001
> > ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b
> > fw_build_timestamp 2018-07-19 12:28 fw_build_id
> > QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
> > ath10k_snoc 18800000.wifi: failed to fetch board data for
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
> > from ath10k/WCN3990/hw1.0/board-2.bin
> > ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id
> > 0x00000000 sub 0000:0000
> > ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 0 tracing 0 dfs 0 testmode 0
> > ath10k_snoc 18800000.wifi: firmware ver api 5 features
> > wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
> > ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file
> > max-sta 32 raw 0 hwcrypto 1
> > ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
> >
> > * origin of the board file
> > - This file comes from the firmware package provided by Thundercomm for
> > the RB3 platform (also sdm845-based), cross-checked to be the same as
> > the file provided together with the sdm845-mtp board.
> >
> > * ids to be used with the board file
> >
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
> >
> > Note, the device comes with the board_id not changed from 0xff.
> > Following the example of existing boards we are adding the
> > calibration variant.
> >
> > * md5sum of each new board file to add
> >
> > $ md5sum *
> > c1f5ff1660cf6dcd74bff7b41c9e693f
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
> >
> > $ sha256sum *
> > 8b250ac1bea81825cc6f4a70105dea89b0952340a9c77a8ab37e99cbfa63e53d
> > bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp.bin
>
> Thanks. The attachment filename was wrong so I added it manually, please
> check:
>
> https://github.com/kvalo/ath10k-firmware/commit/77c5345a8420d002de9ee6b7180d465f94535186
Looks correct, thank you! Please excuse me, I completely forgot about
the file name.
>
> New:
> bus=snoc,qmi-board-id=3f,qmi-chip-id=30214,variant=Qualcomm_sdm845mtp
>
> Changed:
>
>
> Deleted:
>
> 1 board image(s) added, 0 changed, 0 deleted, 27 in total
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-12-13 14:12 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-07 15:56 ath10k-firmware: WCN3990: Add board file for the Qualcomm SDM845 MTP platform Dmitry Baryshkov
2023-12-13 14:07 ` Kalle Valo
2023-12-13 14:11 ` Dmitry Baryshkov
-- strict thread matches above, loose matches on Subject: below --
2023-08-28 13:38 Dmitry Baryshkov
2023-08-28 13:38 ` Dmitry Baryshkov
2023-12-07 14:59 ` Kalle Valo
2023-12-07 15:57 ` Dmitry Baryshkov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.