Re: [PATCH v1 4/5] arm64: dts: rockchip: add core dtsi for RK3568 SoC

[Marc Zyngier <maz@kernel.org>]

On Wed, 21 Apr 2021 07:59:20 +0100,
<cl@rock-chips.com> wrote:
> 
> From: Liang Chen <cl@rock-chips.com>
> 
> RK3568 is a high-performance and low power quad-core application processor
> designed for personal mobile internet device and AIoT equipments.
> 
> This patch add basic core dtsi file for it.
> 
> Signed-off-by: Liang Chen <cl@rock-chips.com>
> ---
>  .../boot/dts/rockchip/rk3568-pinctrl.dtsi     | 2789 +++++++++++++++++
>  arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  795 +++++
>  .../boot/dts/rockchip/rockchip-pinconf.dtsi   |  346 ++
>  3 files changed, 3930 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568.dtsi
>  create mode 100644 arch/arm64/boot/dts/rockchip/rockchip-pinconf.dtsi
>

[...]

> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> new file mode 100644
> index 000000000000..ac8db2f54f2b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -0,0 +1,795 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <dt-bindings/clock/rk3568-cru.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,boot-mode.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +	compatible = "rockchip,rk3568";
> +
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		serial2 = &uart2;
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			clocks = <&scmi_clk 0>;
> +			operating-points-v2 = <&cpu0_opp_table>;
> +			#cooling-cells = <2>;
> +		};
> +		cpu1: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x100>;
> +			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
> +		};
> +		cpu2: cpu@200 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x200>;
> +			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
> +		};
> +		cpu3: cpu@300 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x300>;
> +			enable-method = "psci";
> +			operating-points-v2 = <&cpu0_opp_table>;
> +		};
> +	};
> +
> +	cpu0_opp_table: cpu0-opp-table {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-408000000 {
> +			opp-hz = /bits/ 64 <408000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +			clock-latency-ns = <40000>;
> +		};
> +		opp-600000000 {
> +			opp-hz = /bits/ 64 <600000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +		};
> +		opp-816000000 {
> +			opp-hz = /bits/ 64 <816000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +			opp-suspend;
> +		};
> +		opp-1104000000 {
> +			opp-hz = /bits/ 64 <1104000000>;
> +			opp-microvolt = <825000 825000 1150000>;
> +		};
> +		opp-1416000000 {
> +			opp-hz = /bits/ 64 <1416000000>;
> +			opp-microvolt = <900000 900000 1150000>;
> +		};
> +		opp-1608000000 {
> +			opp-hz = /bits/ 64 <1608000000>;
> +			opp-microvolt = <975000 975000 1150000>;
> +		};
> +		opp-1800000000 {
> +			opp-hz = /bits/ 64 <1800000000>;
> +			opp-microvolt = <1050000 1050000 1150000>;
> +		};
> +		opp-1992000000 {
> +			opp-hz = /bits/ 64 <1992000000>;
> +			opp-microvolt = <1150000 1150000 1150000>;
> +		};
> +	};
> +
> +	arm-pmu {
> +		compatible = "arm,cortex-a55-pmu", "arm,armv8-pmuv3";
> +		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> +	};
> +
> +	firmware {
> +		scmi: scmi {
> +			compatible = "arm,scmi-smc";
> +			shmem = <&scmi_shmem>;
> +			arm,smc-id = <0x82000010>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			scmi_clk: protocol@14 {
> +				reg = <0x14>;
> +				#clock-cells = <1>;
> +			};
> +		};
> +
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;

This doesn't match the GICv3 binding for PPIs.

> +		arm,no-tick-in-suspend;

Oh, really? :-(

> +	};
> +
> +	xin24m: xin24m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xin24m";
> +	};
> +
> +	xin32k: xin32k {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		clock-output-names = "xin32k";
> +		#clock-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&clk32k_out0>;
> +	};
> +
> +	scmi_shmem: scmi-shmem@10f000 {
> +		compatible = "arm,scmi-shmem";
> +		reg = <0x0 0x0010f000 0x0 0x100>;
> +	};
> +
> +	gic: interrupt-controller@fd400000 {
> +		compatible = "arm,gic-v3";
> +		#interrupt-cells = <3>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		interrupt-controller;
> +
> +		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
> +		      <0x0 0xfd460000 0 0xc0000>; /* GICR */
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;

Please add the 'mbi-alias' property, which should map onto the GICA
range that GIC600 provides. At least this could be useful to have MSIs
despite the lack of a working ITS. We can work out the usable ranges
on a per-board basis.

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.