* [GIT PULL] xilinx patches for v2024.10-rc1
@ 2024-06-17 16:12 Michal Simek
2024-06-17 19:07 ` Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Michal Simek @ 2024-06-17 16:12 UTC (permalink / raw)
To: Tom Rini; +Cc: U-Boot Mailing List
Hi Tom,
please pull these patches to your tree. Gitlab CI is not showing any issue.
There are some alignments and improvements but overall nothing significant. The
biggest patchset is add support for new AMD Versal Gen 2 SoC.
Thanks,
Michal
The following changes since commit 0786dd573d0793417852e009dee3148ebdd163f3:
test/py: net_boot: Add test cases for net boot (2024-06-13 16:31:24 -0600)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-microblaze.git
tags/xilinx-for-v2024.10-rc1
for you to fetch changes up to e4a11e984d11cf4bbe55385cbae03c08f27ecd02:
xilinx: Enable FF-A for all our arm64 SoCs (2024-06-17 16:02:30 +0200)
----------------------------------------------------------------
AMD/Xilinx changes for v2024.10-rc1
common:
- spl: Introduce SoC specific init function
xilinx:
- Enable FF-A and NVMEM
- Rename spl_board_init() to spl_soc_init()
zynqmp:
- DT alignments
- Enable reset from SPL
- Enable USB3 for KD240
- Align multiboot register on Kria for proper reboot
- Allow multiboot environment write even in saved environment
- Move zynqmp commands from board/ to arch/
- Clean up xilinx_zynqmp.h
versal:
- Do not prioritize boot device if driver is not enabled
versal-net:
- Setup location for redundant variables in SPI
versal2:
- Add support for new SOC
mmc:
- Fix tap delay for SD on Versal NET
spi:
- Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part
gpio:
- Cover MODEPIN firmware dependency
----------------------------------------------------------------
Charlie Johnston (1):
board: zynqmp: Move zynqmp commands from board/ to arch/
Kory Maincent (1):
xilinx: zynqmp: Allow multiboot environment write even in saved environment
Lukas Funke (3):
spl: Introduce SoC specific init function
arm64: zynq(mp): Rename spl_board_init() to spl_soc_init()
xilinx: zynqmp: Enable reset_cpu() in SPL
Michal Simek (11):
xilinx: zynqmp: Clean up xilinx_zynqmp.h
xilinx: Enable NVMEM framework for all platforms
arm64: zynqmp: Update rproc node
arm64: versal2: Add support for AMD Versal Gen 2
soc: versal2: Add SoC driver for AMD Versal Gen 2
mmc: versal2: Update zynq_sdhci driver to support AMD Versal Gen 2
spi: versal2: Enable spi drivers for Versal Gen 2
arm64: zynqmp: Setup multiboot register to 0
arm64: zynqmp: Align #address/size-cells with node
gpio: Add proper dependency on ZYNQMP_FIRMWARE
xilinx: Enable FF-A for all our arm64 SoCs
Neal Frager (1):
arm64: zynqmp: Enable usb3 for k24 som
Prasad Kummari (1):
mtd: spi-nor: Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part
Simek, Michal (1):
sdhci: zynq: Fix tap delay for SD on Versal NET
Venkatesh Yadav Abbarapu (2):
xilinx: versal: Do not prioritize boot device if driver is not enabled
xilinx: versal-net: Add env redund offset
arch/arm/Kconfig | 18 +-
arch/arm/Makefile | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/amd-versal2-virt.dts | 11 +
arch/arm/dts/zynqmp-mini-nand.dts | 4 +-
arch/arm/dts/zynqmp.dtsi | 67 +++-
arch/arm/mach-versal2/Kconfig | 55 ++++
arch/arm/mach-versal2/Makefile | 10 +
arch/arm/mach-versal2/clk.c | 34 ++
arch/arm/mach-versal2/cpu.c | 93 ++++++
arch/arm/mach-versal2/include/mach/hardware.h | 97 ++++++
arch/arm/mach-versal2/include/mach/sys_proto.h | 9 +
arch/arm/mach-zynq/spl.c | 4 +-
arch/arm/mach-zynqmp/Kconfig | 13 +-
arch/arm/mach-zynqmp/Makefile | 4 +
arch/arm/mach-zynqmp/spl.c | 4 +-
board/xilinx/zynqmp/cmds.c => arch/arm/mach-zynqmp/zynqmp.c | 0
board/amd/common | 1 +
board/amd/versal2/Kconfig | 16 +
board/amd/versal2/MAINTAINERS | 7 +
board/amd/versal2/Makefile | 11 +
board/amd/versal2/board.c | 343
++++++++++++++++++++
board/amd/versal2/cmds.c | 81 +++++
board/xilinx/Kconfig | 6 +-
board/xilinx/versal/board.c | 15 +
board/xilinx/zynqmp/Kconfig | 19 --
board/xilinx/zynqmp/Makefile | 4 -
board/xilinx/zynqmp/zynqmp-sm-k24-revA/psu_init_gpl.c | 23 +-
board/xilinx/zynqmp/zynqmp.c | 20 +-
board/xilinx/zynqmp/zynqmp_kria.env | 1 +
common/spl/Kconfig | 7 +
common/spl/spl.c | 3 +
configs/amd_versal2_virt_defconfig | 151 +++++++++
configs/xilinx_versal_net_virt_defconfig | 3 +
configs/xilinx_versal_virt_defconfig | 2 +
configs/xilinx_zynq_virt_defconfig | 1 +
configs/xilinx_zynqmp_kria_defconfig | 1 +
configs/xilinx_zynqmp_virt_defconfig | 2 +
drivers/gpio/Kconfig | 4 +-
drivers/mailbox/Kconfig | 2 +-
drivers/mmc/zynq_sdhci.c | 24 +-
drivers/mtd/spi/spi-nor-ids.c | 2 +-
drivers/soc/Kconfig | 8 +
drivers/soc/Makefile | 1 +
drivers/soc/soc_amd_versal2.c | 77 +++++
drivers/spi/Kconfig | 2 +-
drivers/spi/cadence_qspi.c | 3 +-
drivers/spi/zynqmp_gqspi.c | 6 +-
env/Kconfig | 6 +-
include/configs/amd_versal2.h | 143 ++++++++
include/configs/xilinx_zynqmp.h | 6 -
include/dt-bindings/power/xlnx-zynqmp-power.h | 17 +-
include/spl.h | 8 +
53 files changed, 1359 insertions(+), 93 deletions(-)
create mode 100644 arch/arm/dts/amd-versal2-virt.dts
create mode 100644 arch/arm/mach-versal2/Kconfig
create mode 100644 arch/arm/mach-versal2/Makefile
create mode 100644 arch/arm/mach-versal2/clk.c
create mode 100644 arch/arm/mach-versal2/cpu.c
create mode 100644 arch/arm/mach-versal2/include/mach/hardware.h
create mode 100644 arch/arm/mach-versal2/include/mach/sys_proto.h
rename board/xilinx/zynqmp/cmds.c => arch/arm/mach-zynqmp/zynqmp.c (100%)
create mode 120000 board/amd/common
create mode 100644 board/amd/versal2/Kconfig
create mode 100644 board/amd/versal2/MAINTAINERS
create mode 100644 board/amd/versal2/Makefile
create mode 100644 board/amd/versal2/board.c
create mode 100644 board/amd/versal2/cmds.c
delete mode 100644 board/xilinx/zynqmp/Kconfig
create mode 100644 configs/amd_versal2_virt_defconfig
create mode 100644 drivers/soc/soc_amd_versal2.c
create mode 100644 include/configs/amd_versal2.h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-06-17 19:08 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-06-17 16:12 [GIT PULL] xilinx patches for v2024.10-rc1 Michal Simek
2024-06-17 19:07 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.