All of lore.kernel.org
 help / color / mirror / Atom feed
From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Varshini Rajendran <varshini.rajendran@microchip.com>,
	mturquette@baylibre.com, sboyd@kernel.org,
	nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com,
	mripard@kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 24/39] clk: at91: sam9x7: add support for HW PLL freq dividers
Date: Mon, 11 Mar 2024 07:34:22 +0200	[thread overview]
Message-ID: <8c53aff9-eddf-47e3-939f-a1e2abb8d824@tuxon.dev> (raw)
In-Reply-To: <20240223172758.672796-1-varshini.rajendran@microchip.com>



On 23.02.2024 19:27, Varshini Rajendran wrote:
> Add support for hardware dividers for PLL IDs in sam9x7 SoC. The system
> PLL - PLLA and the system PLL divided by 2 - PLLADIV2 with PLL ID 0 and
> 4 respectively, both have a hardware divider /2. This has to taken into

to be taken

> account in the software to obtain the right frequencies. Support for the
> same is added in the PLL driver.
> 
> fcorepllack -----> HW Div = 2 -+--> fpllack
>                                |
>                                +--> HW Div = 2 ---> fplladiv2ck
> 
> In this case the corepll freq is 1600 MHz. So, the plla freq is 800 MHz
> after the hardware divider and the plladiv2 freq is 400 MHz after the
> hardware divider (Given that the DIVPMC is 0).

s/Given/given

> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  drivers/clk/at91/clk-sam9x60-pll.c | 38 ++++++++++++++++++++++++++----
>  drivers/clk/at91/pmc.h             |  1 +
>  2 files changed, 34 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
> index b0314dfd7393..1f80759309c0 100644
> --- a/drivers/clk/at91/clk-sam9x60-pll.c
> +++ b/drivers/clk/at91/clk-sam9x60-pll.c
> @@ -73,9 +73,15 @@ static unsigned long sam9x60_frac_pll_recalc_rate(struct clk_hw *hw,
>  {
>  	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
>  	struct sam9x60_frac *frac = to_sam9x60_frac(core);
> +	unsigned long freq;
>  
> -	return parent_rate * (frac->mul + 1) +
> +	freq = parent_rate * (frac->mul + 1) +
>  		DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22));
> +
> +	if (core->layout->div2)
> +		freq >>= 1;
> +
> +	return freq;
>  }
>  
>  static int sam9x60_frac_pll_set(struct sam9x60_pll_core *core)
> @@ -432,6 +438,12 @@ static unsigned long sam9x60_div_pll_recalc_rate(struct clk_hw *hw,
>  	return DIV_ROUND_CLOSEST_ULL(parent_rate, (div->div + 1));
>  }
>  
> +static unsigned long sam9x60_fixed_div_pll_recalc_rate(struct clk_hw *hw,
> +						       unsigned long parent_rate)
> +{
> +	return parent_rate >> 1;
> +}
> +
>  static long sam9x60_div_pll_compute_div(struct sam9x60_pll_core *core,
>  					unsigned long *parent_rate,
>  					unsigned long rate)
> @@ -606,6 +618,16 @@ static const struct clk_ops sam9x60_div_pll_ops_chg = {
>  	.restore_context = sam9x60_div_pll_restore_context,
>  };
>  
> +static const struct clk_ops sam9x60_fixed_div_pll_ops = {
> +	.prepare = sam9x60_div_pll_prepare,
> +	.unprepare = sam9x60_div_pll_unprepare,
> +	.is_prepared = sam9x60_div_pll_is_prepared,
> +	.recalc_rate = sam9x60_fixed_div_pll_recalc_rate,
> +	.round_rate = sam9x60_div_pll_round_rate,
> +	.save_context = sam9x60_div_pll_save_context,
> +	.restore_context = sam9x60_div_pll_restore_context,
> +};
> +
>  struct clk_hw * __init
>  sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
>  			      const char *name, const char *parent_name,
> @@ -725,10 +747,16 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
>  	else
>  		init.parent_names = &parent_name;
>  	init.num_parents = 1;
> -	if (flags & CLK_SET_RATE_GATE)
> -		init.ops = &sam9x60_div_pll_ops;
> -	else
> -		init.ops = &sam9x60_div_pll_ops_chg;
> +
> +	if (layout->div2) {
> +		init.ops = &sam9x60_fixed_div_pll_ops;
> +	} else {
> +		if (flags & CLK_SET_RATE_GATE)
> +			init.ops = &sam9x60_div_pll_ops;
> +		else
> +			init.ops = &sam9x60_div_pll_ops_chg;
> +	}
> +

can't it be something like:

	if (layout->div2)
		// ...
	else if (flags & CLK_SET_RATE_GATE)
		// ...
	else
		//

?
>  	init.flags = flags;
>  
>  	div->core.id = id;
> diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
> index bb9da35198d9..91d1c6305d95 100644
> --- a/drivers/clk/at91/pmc.h
> +++ b/drivers/clk/at91/pmc.h
> @@ -64,6 +64,7 @@ struct clk_pll_layout {
>  	u8 frac_shift;
>  	u8 div_shift;
>  	u8 endiv_shift;
> +	u8 div2;
>  };
>  
>  extern const struct clk_pll_layout at91rm9200_pll_layout;

WARNING: multiple messages have this Message-ID (diff)
From: claudiu beznea <claudiu.beznea@tuxon.dev>
To: Varshini Rajendran <varshini.rajendran@microchip.com>,
	mturquette@baylibre.com, sboyd@kernel.org,
	nicolas.ferre@microchip.com, alexandre.belloni@bootlin.com,
	mripard@kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 24/39] clk: at91: sam9x7: add support for HW PLL freq dividers
Date: Mon, 11 Mar 2024 07:34:22 +0200	[thread overview]
Message-ID: <8c53aff9-eddf-47e3-939f-a1e2abb8d824@tuxon.dev> (raw)
In-Reply-To: <20240223172758.672796-1-varshini.rajendran@microchip.com>



On 23.02.2024 19:27, Varshini Rajendran wrote:
> Add support for hardware dividers for PLL IDs in sam9x7 SoC. The system
> PLL - PLLA and the system PLL divided by 2 - PLLADIV2 with PLL ID 0 and
> 4 respectively, both have a hardware divider /2. This has to taken into

to be taken

> account in the software to obtain the right frequencies. Support for the
> same is added in the PLL driver.
> 
> fcorepllack -----> HW Div = 2 -+--> fpllack
>                                |
>                                +--> HW Div = 2 ---> fplladiv2ck
> 
> In this case the corepll freq is 1600 MHz. So, the plla freq is 800 MHz
> after the hardware divider and the plladiv2 freq is 400 MHz after the
> hardware divider (Given that the DIVPMC is 0).

s/Given/given

> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  drivers/clk/at91/clk-sam9x60-pll.c | 38 ++++++++++++++++++++++++++----
>  drivers/clk/at91/pmc.h             |  1 +
>  2 files changed, 34 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
> index b0314dfd7393..1f80759309c0 100644
> --- a/drivers/clk/at91/clk-sam9x60-pll.c
> +++ b/drivers/clk/at91/clk-sam9x60-pll.c
> @@ -73,9 +73,15 @@ static unsigned long sam9x60_frac_pll_recalc_rate(struct clk_hw *hw,
>  {
>  	struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
>  	struct sam9x60_frac *frac = to_sam9x60_frac(core);
> +	unsigned long freq;
>  
> -	return parent_rate * (frac->mul + 1) +
> +	freq = parent_rate * (frac->mul + 1) +
>  		DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22));
> +
> +	if (core->layout->div2)
> +		freq >>= 1;
> +
> +	return freq;
>  }
>  
>  static int sam9x60_frac_pll_set(struct sam9x60_pll_core *core)
> @@ -432,6 +438,12 @@ static unsigned long sam9x60_div_pll_recalc_rate(struct clk_hw *hw,
>  	return DIV_ROUND_CLOSEST_ULL(parent_rate, (div->div + 1));
>  }
>  
> +static unsigned long sam9x60_fixed_div_pll_recalc_rate(struct clk_hw *hw,
> +						       unsigned long parent_rate)
> +{
> +	return parent_rate >> 1;
> +}
> +
>  static long sam9x60_div_pll_compute_div(struct sam9x60_pll_core *core,
>  					unsigned long *parent_rate,
>  					unsigned long rate)
> @@ -606,6 +618,16 @@ static const struct clk_ops sam9x60_div_pll_ops_chg = {
>  	.restore_context = sam9x60_div_pll_restore_context,
>  };
>  
> +static const struct clk_ops sam9x60_fixed_div_pll_ops = {
> +	.prepare = sam9x60_div_pll_prepare,
> +	.unprepare = sam9x60_div_pll_unprepare,
> +	.is_prepared = sam9x60_div_pll_is_prepared,
> +	.recalc_rate = sam9x60_fixed_div_pll_recalc_rate,
> +	.round_rate = sam9x60_div_pll_round_rate,
> +	.save_context = sam9x60_div_pll_save_context,
> +	.restore_context = sam9x60_div_pll_restore_context,
> +};
> +
>  struct clk_hw * __init
>  sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
>  			      const char *name, const char *parent_name,
> @@ -725,10 +747,16 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
>  	else
>  		init.parent_names = &parent_name;
>  	init.num_parents = 1;
> -	if (flags & CLK_SET_RATE_GATE)
> -		init.ops = &sam9x60_div_pll_ops;
> -	else
> -		init.ops = &sam9x60_div_pll_ops_chg;
> +
> +	if (layout->div2) {
> +		init.ops = &sam9x60_fixed_div_pll_ops;
> +	} else {
> +		if (flags & CLK_SET_RATE_GATE)
> +			init.ops = &sam9x60_div_pll_ops;
> +		else
> +			init.ops = &sam9x60_div_pll_ops_chg;
> +	}
> +

can't it be something like:

	if (layout->div2)
		// ...
	else if (flags & CLK_SET_RATE_GATE)
		// ...
	else
		//

?
>  	init.flags = flags;
>  
>  	div->core.id = id;
> diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
> index bb9da35198d9..91d1c6305d95 100644
> --- a/drivers/clk/at91/pmc.h
> +++ b/drivers/clk/at91/pmc.h
> @@ -64,6 +64,7 @@ struct clk_pll_layout {
>  	u8 frac_shift;
>  	u8 div_shift;
>  	u8 endiv_shift;
> +	u8 div2;
>  };
>  
>  extern const struct clk_pll_layout at91rm9200_pll_layout;

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-03-11  5:34 UTC|newest]

Thread overview: 179+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-23 17:13 [PATCH v4 00/39] Add support for sam9x7 SoC family Varshini Rajendran
2024-02-23 17:13 ` Varshini Rajendran
2024-02-23 17:22 ` [PATCH v4 01/39] dt-bindings: net: cdns,macb: add sam9x7 ethernet interface Varshini Rajendran
2024-02-23 17:22 ` [PATCH v4 02/39] dt-bindings: atmel-sysreg: add sam9x7 Varshini Rajendran
2024-02-23 17:22   ` Varshini Rajendran
2024-02-23 17:23 ` [PATCH v4 03/39] dt-bindings: crypto: add sam9x7 in Atmel AES Varshini Rajendran
2024-02-23 17:23   ` Varshini Rajendran
2024-02-26  9:18   ` Tudor Ambarus
2024-02-26  9:18     ` Tudor Ambarus
2024-02-23 17:23 ` [PATCH v4 04/39] dt-bindings: crypto: add sam9x7 in Atmel SHA Varshini Rajendran
2024-02-23 17:23   ` Varshini Rajendran
2024-02-26  9:23   ` Tudor Ambarus
2024-02-26  9:23     ` Tudor Ambarus
2024-02-23 17:24 ` [PATCH v4 05/39] dt-bindings: crypto: add sam9x7 in Atmel TDES Varshini Rajendran
2024-02-23 17:24   ` Varshini Rajendran
2024-02-24 19:50   ` Conor Dooley
2024-02-24 19:50     ` Conor Dooley
2024-02-26  9:24   ` Tudor Ambarus
2024-02-26  9:24     ` Tudor Ambarus
2024-02-23 17:24 ` [PATCH v4 06/39] dt-bindings: i2c: at91: Add sam9x7 compatible string Varshini Rajendran
2024-02-23 17:24   ` Varshini Rajendran
2024-02-24 19:49   ` Conor Dooley
2024-02-24 19:49     ` Conor Dooley
2024-02-23 17:25 ` [PATCH v4 07/39] dt-bindings: atmel-ssc: add microchip,sam9x7-ssc Varshini Rajendran
2024-02-23 17:25   ` Varshini Rajendran
2024-02-23 17:25 ` [PATCH v4 08/39] dt-bindings: atmel-nand: add microchip,sam9x7-pmecc Varshini Rajendran
2024-02-23 17:25   ` Varshini Rajendran
2024-02-23 17:25   ` Varshini Rajendran
2024-02-24 19:50   ` Conor Dooley
2024-02-24 19:50     ` Conor Dooley
2024-02-24 19:50     ` Conor Dooley
2024-02-26 10:43   ` Miquel Raynal
2024-02-26 10:43     ` Miquel Raynal
2024-02-26 10:43     ` Miquel Raynal
2024-02-23 17:25 ` [PATCH v4 09/39] dt-bindings: pinctrl: at91: add sam9x7 Varshini Rajendran
2024-02-23 17:25   ` Varshini Rajendran
2024-02-29 13:41   ` Linus Walleij
2024-02-29 13:41     ` Linus Walleij
2024-02-23 17:25 ` [PATCH v4 10/39] dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG Varshini Rajendran
2024-02-23 17:25   ` Varshini Rajendran
2024-02-23 17:25 ` [PATCH v4 11/39] dt-bindings: rtt: at91rm9260: add sam9x7 compatible Varshini Rajendran
2024-02-23 17:25   ` Varshini Rajendran
2024-02-24 19:51   ` Conor Dooley
2024-02-24 19:51     ` Conor Dooley
2024-02-29 21:27   ` (subset) " Alexandre Belloni
2024-02-29 21:27     ` Alexandre Belloni
2024-02-23 17:25 ` [PATCH v4 12/39] dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7 Varshini Rajendran
2024-02-23 17:25   ` Varshini Rajendran
2024-02-24 20:02   ` Conor Dooley
2024-02-24 20:02     ` Conor Dooley
2024-02-28  7:03     ` Varshini.Rajendran
2024-02-28  7:03       ` Varshini.Rajendran
2024-02-28 11:49       ` Conor Dooley
2024-02-28 11:49         ` Conor Dooley
2024-02-29  8:55         ` Varshini.Rajendran
2024-02-29  8:55           ` Varshini.Rajendran
2024-02-29 18:26           ` Conor Dooley
2024-02-29 18:26             ` Conor Dooley
2024-02-23 17:26 ` [PATCH v4 13/39] ASoC: dt-bindings: atmel-classd: add sam9x7 compatible Varshini Rajendran
2024-02-23 17:26   ` Varshini Rajendran
2024-02-24 19:48   ` Conor Dooley
2024-02-24 19:48     ` Conor Dooley
2024-02-23 17:26 ` [PATCH v4 14/39] dt-bindings: pwm: at91: Add sam9x7 compatible strings list Varshini Rajendran
2024-02-23 17:26   ` Varshini Rajendran
2024-02-24 20:03   ` Conor Dooley
2024-02-24 20:03     ` Conor Dooley
     [not found]   ` <igmm3npqcnjuhhncfd22pjhjuzbtsl25jfzbpcsyx5bu2xbbto@ynp7psnpldxr>
2024-03-18  8:55     ` Uwe Kleine-König
2024-03-18  8:55       ` Uwe Kleine-König
2024-02-23 17:26 ` [PATCH v4 15/39] dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt Varshini Rajendran
2024-02-23 17:26   ` Varshini Rajendran
2024-02-24 20:04   ` Conor Dooley
2024-02-24 20:04     ` Conor Dooley
2024-02-23 17:26 ` [PATCH v4 16/39] spi: dt-bindings: atmel,at91rm9200-spi: remove 9x60 compatible from list Varshini Rajendran
2024-02-23 17:26   ` Varshini Rajendran
2024-02-26  9:09   ` Tudor Ambarus
2024-02-26  9:09     ` Tudor Ambarus
2024-02-28  9:28     ` Varshini.Rajendran
2024-02-28  9:28       ` Varshini.Rajendran
2024-02-28  9:38       ` Tudor Ambarus
2024-02-28  9:38         ` Tudor Ambarus
2024-02-23 17:26 ` [PATCH v4 17/39] ASoC: dt-bindings: microchip: add sam9x7 Varshini Rajendran
2024-02-23 17:27 ` [PATCH v4 18/39] ARM: at91: pm: add support for sam9x7 SoC family Varshini Rajendran
2024-02-23 17:27   ` Varshini Rajendran
2024-03-03 12:20   ` claudiu beznea
2024-03-03 12:20     ` claudiu beznea
2024-02-23 17:27 ` [PATCH v4 19/39] ARM: at91: pm: add sam9x7 SoC init config Varshini Rajendran
2024-02-23 17:27   ` Varshini Rajendran
2024-03-03 12:20   ` claudiu beznea
2024-03-03 12:20     ` claudiu beznea
2024-02-23 17:27 ` [PATCH v4 20/39] ARM: at91: add support in SoC driver for new sam9x7 Varshini Rajendran
2024-02-23 17:27   ` Varshini Rajendran
2024-02-26 17:01   ` Nicolas Ferre
2024-02-26 17:01     ` Nicolas Ferre
2024-03-03 12:21   ` claudiu beznea
2024-03-03 12:21     ` claudiu beznea
2024-02-23 17:27 ` [PATCH v4 21/39] dt-bindings: clk: at91: add sam9x7 Varshini Rajendran
2024-02-23 17:27   ` Varshini Rajendran
2024-02-24 20:05   ` Conor Dooley
2024-02-24 20:05     ` Conor Dooley
2024-03-11  5:32   ` claudiu beznea
2024-03-11  5:32     ` claudiu beznea
2024-02-23 17:27 ` [PATCH v4 22/39] dt-bindings: clk: at91: add sam9x7 clock controller Varshini Rajendran
2024-02-23 17:27   ` Varshini Rajendran
2024-02-24 20:06   ` Conor Dooley
2024-02-24 20:06     ` Conor Dooley
2024-03-11  5:33   ` claudiu beznea
2024-03-11  5:33     ` claudiu beznea
2024-02-23 17:27 ` [PATCH v4 23/39] clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs Varshini Rajendran
2024-02-23 17:27   ` Varshini Rajendran
2024-02-23 17:27 ` [PATCH v4 24/39] clk: at91: sam9x7: add support for HW PLL freq dividers Varshini Rajendran
2024-02-23 17:27   ` Varshini Rajendran
2024-03-11  5:34   ` claudiu beznea [this message]
2024-03-11  5:34     ` claudiu beznea
2024-02-23 17:28 ` [PATCH v4 25/39] clk: at91: sama7g5: move mux table macros to header file Varshini Rajendran
2024-02-23 17:28   ` Varshini Rajendran
2024-02-23 17:28 ` [PATCH v4 26/39] dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT Varshini Rajendran
2024-02-23 17:28   ` Varshini Rajendran
2024-03-01 21:26   ` Rob Herring
2024-03-01 21:26     ` Rob Herring
2024-02-23 17:28 ` [PATCH v4 27/39] clk: at91: sam9x7: add sam9x7 pmc driver Varshini Rajendran
2024-02-23 17:28   ` Varshini Rajendran
2024-03-11  5:58   ` claudiu beznea
2024-03-11  5:58     ` claudiu beznea
2024-03-18  9:25     ` Varshini.Rajendran
2024-03-18  9:25       ` Varshini.Rajendran
2024-03-18 20:17       ` claudiu beznea
2024-03-18 20:17         ` claudiu beznea
2024-02-23 17:28 ` [PATCH v4 28/39] dt-bindings: irqchip/atmel-aic5: Add support for sam9x7 aic Varshini Rajendran
2024-02-23 17:28   ` Varshini Rajendran
2024-02-23 17:29 ` [PATCH v4 29/39] irqchip/atmel-aic5: Add support to get nirqs from DT for sam9x60 & sam9x7 Varshini Rajendran
2024-02-23 17:29   ` Varshini Rajendran
2024-03-03 12:21   ` claudiu beznea
2024-03-03 12:21     ` claudiu beznea
2024-03-08  8:50     ` Varshini.Rajendran
2024-03-08  8:50       ` Varshini.Rajendran
2024-03-08 10:15       ` Conor Dooley
2024-03-08 10:15         ` Conor Dooley
2024-03-09 13:13       ` claudiu beznea
2024-03-09 13:13         ` claudiu beznea
2024-02-23 17:29 ` [PATCH v4 30/39] power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 Varshini Rajendran
2024-02-23 17:29   ` Varshini Rajendran
2024-03-03 12:22   ` claudiu beznea
2024-03-03 12:22     ` claudiu beznea
2024-02-23 17:29 ` [PATCH v4 31/39] power: reset: at91-reset: add reset support for sam9x7 SoC Varshini Rajendran
2024-02-23 17:30 ` [PATCH v4 32/39] power: reset: at91-reset: add sdhwc " Varshini Rajendran
2024-02-23 17:30 ` [PATCH v4 33/39] dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 Varshini Rajendran
2024-02-23 17:30   ` Varshini Rajendran
2024-02-23 17:30 ` [PATCH v4 34/39] dt-bindings: power: reset: atmel,sama5d2-shdwc: " Varshini Rajendran
2024-02-23 17:30   ` Varshini Rajendran
2024-02-23 17:30 ` [PATCH v4 35/39] ARM: at91: Kconfig: add config flag for SAM9X7 SoC Varshini Rajendran
2024-02-23 17:30   ` Varshini Rajendran
2024-03-03 12:22   ` claudiu beznea
2024-03-03 12:22     ` claudiu beznea
2024-02-23 17:30 ` [PATCH v4 36/39] ARM: configs: at91: enable config flags for sam9x7 SoC family Varshini Rajendran
2024-02-23 17:30   ` Varshini Rajendran
2024-02-23 17:30 ` [PATCH v4 37/39] ARM: dts: at91: sam9x7: add device tree for SoC Varshini Rajendran
2024-03-03 12:24   ` claudiu beznea
2024-03-04 16:33     ` Varshini.Rajendran
2024-03-06  8:38       ` claudiu beznea
2024-02-23 17:31 ` [PATCH v4 38/39] dt-bindings: arm: add sam9x75 curiosity board Varshini Rajendran
2024-02-23 17:31   ` Varshini Rajendran
2024-03-01 21:26   ` Rob Herring
2024-03-01 21:26     ` Rob Herring
2024-02-23 17:31 ` [PATCH v4 39/39] ARM: dts: at91: sam9x75_curiosity: " Varshini Rajendran
2024-02-23 17:31   ` Varshini Rajendran
2024-03-03 12:19   ` claudiu beznea
2024-03-03 12:19     ` claudiu beznea
2024-03-08  9:48     ` Varshini.Rajendran
2024-03-08  9:48       ` Varshini.Rajendran
2024-02-24  1:18 ` (subset) [PATCH v4 00/39] Add support for sam9x7 SoC family Mark Brown
2024-02-24  1:18   ` Mark Brown
2024-02-27  1:21 ` Andi Shyti
2024-02-27  1:21   ` Andi Shyti
2024-02-27  3:20 ` patchwork-bot+netdevbpf
2024-02-27  3:20   ` patchwork-bot+netdevbpf
2024-02-28 15:53 ` (subset) " Mark Brown
2024-02-28 15:53   ` Mark Brown
2024-03-01 10:51 ` Herbert Xu
2024-03-01 10:51   ` Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8c53aff9-eddf-47e3-939f-a1e2abb8d824@tuxon.dev \
    --to=claudiu.beznea@tuxon.dev \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=sboyd@kernel.org \
    --cc=varshini.rajendran@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.