From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, igt-dev@lists.freedesktop.org
Cc: Intel-gfx@lists.freedesktop.org,
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Subject: Re: [igt-dev] [PATCH i-g-t 16/21] gem_wsim: Some more example workloads
Date: Wed, 8 May 2019 14:50:41 +0100 [thread overview]
Message-ID: <8d694e1c-93b8-dcab-2fd4-cd9e3cd4bb72@linux.intel.com> (raw)
In-Reply-To: <155731847301.28545.3793641581373958416@skylake-alporthouse-com>
On 08/05/2019 13:27, Chris Wilson wrote:
> Quoting Tvrtko Ursulin (2019-05-08 13:10:53)
>> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>
>> A few additional workloads useful for experimenting with scheduling.
>>
>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>
> Are the extra modes & .wsim supported by scripts/media-bench.pl?
> i.e. can I just run media-bench.pl and have it exercise all the new
> features?
Not sure what you mean by extra modes? If all new wsim commands then no.
They are not in the default media-bench.pl set. The workloads from this
patch are not in that set so are just for reference.
Virtual engine (gem_wsim -b i915) is supported by media-bench.pl even
with the old/default set of workloads.
The catch is old wsim workloads use VCS to mean any VCS and in those
cases -b i915 will set up the virtual engine
automatically/transparently. So those old workloads can be ran both with
userspace or i915 balancing.
Regards,
Tvrtko
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
WARNING: multiple messages have this Message-ID (diff)
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, igt-dev@lists.freedesktop.org
Cc: Intel-gfx@lists.freedesktop.org
Subject: Re: [igt-dev] [PATCH i-g-t 16/21] gem_wsim: Some more example workloads
Date: Wed, 8 May 2019 14:50:41 +0100 [thread overview]
Message-ID: <8d694e1c-93b8-dcab-2fd4-cd9e3cd4bb72@linux.intel.com> (raw)
In-Reply-To: <155731847301.28545.3793641581373958416@skylake-alporthouse-com>
On 08/05/2019 13:27, Chris Wilson wrote:
> Quoting Tvrtko Ursulin (2019-05-08 13:10:53)
>> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>
>> A few additional workloads useful for experimenting with scheduling.
>>
>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>
> Are the extra modes & .wsim supported by scripts/media-bench.pl?
> i.e. can I just run media-bench.pl and have it exercise all the new
> features?
Not sure what you mean by extra modes? If all new wsim commands then no.
They are not in the default media-bench.pl set. The workloads from this
patch are not in that set so are just for reference.
Virtual engine (gem_wsim -b i915) is supported by media-bench.pl even
with the old/default set of workloads.
The catch is old wsim workloads use VCS to mean any VCS and in those
cases -b i915 will set up the virtual engine
automatically/transparently. So those old workloads can be ran both with
userspace or i915 balancing.
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-05-08 13:50 UTC|newest]
Thread overview: 126+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-08 12:10 [igt-dev] [PATCH i-g-t 00/21] Media scalability tooling Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 01/21] scripts/trace.pl: Fix after intel_engine_notify removal Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-08 12:17 ` [igt-dev] " Chris Wilson
2019-05-08 12:17 ` Chris Wilson
2019-05-09 9:27 ` [Intel-gfx] " Tvrtko Ursulin
2019-05-09 9:27 ` Tvrtko Ursulin
2019-05-10 12:33 ` Chris Wilson
2019-05-10 12:33 ` Chris Wilson
2019-05-13 12:16 ` Tvrtko Ursulin
2019-05-13 12:16 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 02/21] headers: bump Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 03/21] trace.pl: Virtual engine support Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 12:52 ` [igt-dev] " Chris Wilson
2019-05-10 12:52 ` Chris Wilson
2019-05-13 12:30 ` [igt-dev] " Tvrtko Ursulin
2019-05-13 12:30 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 04/21] trace.pl: Virtual engine preemption support Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 12:55 ` [igt-dev] [Intel-gfx] " Chris Wilson
2019-05-10 12:55 ` Chris Wilson
2019-05-13 12:38 ` [igt-dev] [Intel-gfx] " Tvrtko Ursulin
2019-05-13 12:38 ` Tvrtko Ursulin
2019-05-08 12:10 ` [Intel-gfx] [PATCH i-g-t 05/21] wsim/media-bench: i915 balancing Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:14 ` [igt-dev] " Chris Wilson
2019-05-10 13:14 ` Chris Wilson
2019-05-13 12:41 ` Tvrtko Ursulin
2019-05-13 12:41 ` Tvrtko Ursulin
2019-05-13 12:54 ` Chris Wilson
2019-05-13 12:54 ` Chris Wilson
2019-05-10 13:23 ` [Intel-gfx] " Chris Wilson
2019-05-10 13:23 ` Chris Wilson
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 06/21] gem_wsim: Use IGT uapi headers Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:15 ` [igt-dev] " Chris Wilson
2019-05-10 13:15 ` Chris Wilson
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 07/21] gem_wsim: Factor out common error handling Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:15 ` [igt-dev] " Chris Wilson
2019-05-10 13:15 ` Chris Wilson
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 08/21] gem_wsim: More wsim_err Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:16 ` [Intel-gfx] " Chris Wilson
2019-05-10 13:16 ` Chris Wilson
2019-05-08 12:10 ` [Intel-gfx] [PATCH i-g-t 09/21] gem_wsim: Submit fence support Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:18 ` [igt-dev] " Chris Wilson
2019-05-10 13:18 ` Chris Wilson
2019-05-08 12:10 ` [Intel-gfx] [PATCH i-g-t 10/21] gem_wsim: Extract str to engine lookup Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:20 ` [igt-dev] " Chris Wilson
2019-05-10 13:20 ` Chris Wilson
2019-05-13 13:08 ` Tvrtko Ursulin
2019-05-13 13:08 ` Tvrtko Ursulin
2019-05-08 12:10 ` [Intel-gfx] [PATCH i-g-t 11/21] gem_wsim: Engine map support Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:26 ` [igt-dev] " Chris Wilson
2019-05-10 13:26 ` Chris Wilson
2019-05-13 13:18 ` Tvrtko Ursulin
2019-05-13 13:18 ` Tvrtko Ursulin
2019-05-13 13:29 ` Chris Wilson
2019-05-13 13:29 ` Chris Wilson
2019-05-13 13:40 ` Tvrtko Ursulin
2019-05-13 13:40 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 12/21] gem_wsim: Save some lines by changing to implicit NULL checking Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:28 ` [igt-dev] " Chris Wilson
2019-05-10 13:28 ` Chris Wilson
2019-05-08 12:10 ` [Intel-gfx] [PATCH i-g-t 13/21] gem_wsim: Compact int command parsing with a macro Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:29 ` [igt-dev] " Chris Wilson
2019-05-10 13:29 ` Chris Wilson
2019-05-13 13:24 ` Tvrtko Ursulin
2019-05-13 13:24 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 14/21] gem_wsim: Engine map load balance command Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:31 ` [igt-dev] " Chris Wilson
2019-05-10 13:31 ` Chris Wilson
2019-05-15 11:44 ` Tvrtko Ursulin
2019-05-15 11:44 ` Tvrtko Ursulin
2019-05-15 11:48 ` Chris Wilson
2019-05-15 11:48 ` Chris Wilson
2019-05-15 11:55 ` Tvrtko Ursulin
2019-05-15 11:55 ` Tvrtko Ursulin
2019-05-08 12:10 ` [Intel-gfx] [PATCH i-g-t 15/21] gem_wsim: Engine bond command Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:36 ` [igt-dev] " Chris Wilson
2019-05-10 13:36 ` Chris Wilson
2019-05-13 13:28 ` Tvrtko Ursulin
2019-05-13 13:28 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 16/21] gem_wsim: Some more example workloads Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-08 12:27 ` [igt-dev] " Chris Wilson
2019-05-08 12:27 ` Chris Wilson
2019-05-08 13:50 ` Tvrtko Ursulin [this message]
2019-05-08 13:50 ` Tvrtko Ursulin
2019-05-08 13:56 ` Chris Wilson
2019-05-08 13:56 ` Chris Wilson
2019-05-08 14:16 ` Tvrtko Ursulin
2019-05-08 14:16 ` Tvrtko Ursulin
2019-05-10 13:37 ` Chris Wilson
2019-05-10 13:37 ` Chris Wilson
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 17/21] gem_wsim: Infinite batch support Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-10 13:48 ` [igt-dev] " Chris Wilson
2019-05-10 13:48 ` Chris Wilson
2019-05-13 13:59 ` Tvrtko Ursulin
2019-05-13 13:59 ` Tvrtko Ursulin
2019-05-13 14:11 ` Chris Wilson
2019-05-13 14:11 ` Chris Wilson
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 18/21] gem_wsim: Command line switch for specifying low slice count workloads Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 19/21] gem_wsim: Per context SSEU control Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-14 21:53 ` [igt-dev] " Chris Wilson
2019-05-14 21:53 ` Chris Wilson
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 20/21] gem_wsim: Allow RCS virtual engine with " Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-08 12:10 ` [igt-dev] [PATCH i-g-t 21/21] tests/i915_query: Engine discovery tests Tvrtko Ursulin
2019-05-08 12:10 ` Tvrtko Ursulin
2019-05-08 12:53 ` [igt-dev] ✓ Fi.CI.BAT: success for Media scalability tooling (rev2) Patchwork
2019-05-08 16:01 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8d694e1c-93b8-dcab-2fd4-cd9e3cd4bb72@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
--cc=chris@chris-wilson.co.uk \
--cc=igt-dev@lists.freedesktop.org \
--cc=tvrtko.ursulin@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.