From: Franz Engel <franz_lambert_engel@domain.hid>
To: Jan Kiszka <jan.kiszka@domain.hid>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai-help] Problem with the configuration of new system
Date: Thu, 5 May 2011 09:30:47 +0100 (BST) [thread overview]
Message-ID: <920250.14934.qm@domain.hid> (raw)
In-Reply-To: <4DC2457A.8020506@domain.hid>
[-- Attachment #1: Type: text/plain, Size: 43258 bytes --]
>On 2011-05-05 07:30, Franz Engel wrote:
>> Hi,
>>
>>
After some days to learn how I receive logs on another PC, here is my
log. The problem is that the PC hangs after a few seconds.
>>
>> pre { font-family: "Liberation Serif"; }p { margin-bottom: 0.21cm; }
>>
>> #[?25l#[H#[J#[2;25HGNU GRUB version 1.98-1ubuntu10
>>
>>
>>
[ 0.000000] Linux version 2.6.32.20-adeos (root@domain.hid) (gcc
version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Wed May 4 22:06:49 CEST
2011
>Can you retry with a recent 2.6.37? .32 is unmaintained (ipipe-wise) for
>quite a while now, and many patches were developed since then.
>Jan
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37.6 (root@domain.hid) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Thu May 5 10:09:01 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37.6 root=/dev/sda1 ro console=ttyS0, 38400 console=tty0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf790540 05B3D (v01 S0081 S0081002 00000002 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf79e000 00040
[ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 062810 APIC1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097)
[ 0.000000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 OEMB1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf798540 00168 (v01 062810 OEMSRAT 00000001 INTL 00000001)
[ 0.000000] ACPI: HPET 00000000bf7986b0 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf7a17f0 0154F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: EINJ 00000000bf7986f0 00130 (v01 AMIER AMI_EINJ 20100628 MSFT 00000097)
[ 0.000000] ACPI: BERT 00000000bf798880 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097)
[ 0.000000] ACPI: ERST 00000000bf7988b0 001B0 (v01 AMIER AMI_ERST 20100628 MSFT 00000097)
[ 0.000000] ACPI: HEST 00000000bf798a60 000A8 (v01 AMIER ABC_HEST 20100628 MSFT 00000097)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x20 -> Node 1
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x14 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x22 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x24 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x30 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x32 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x34 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-1c0000000
[ 0.000000] SRAT: Node 1 PXM 1 1c0000000-340000000
[ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,1c0000000) -> [0,1c0000000)
[ 0.000000] Initmem setup node 0 0000000000000000-00000001c0000000
[ 0.000000] NODE_DATA [00000001bfffb000 - 00000001bfffffff]
[ 0.000000] Initmem setup node 1 00000001c0000000-0000000340000000
[ 0.000000] NODE_DATA [000000033fffb000 - 000000033fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] 1: 0x001c0000 -> 0x00340000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 24 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
[ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000
[ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000
[ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
[ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 62 pages/cpu @ffff8800bee00000 s224064 r8192 d21696 u262144
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 3096841
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.37.6 root=/dev/sda1 ro console=ttyS0, 38400 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 12315164k/13631488k available (5797k kernel code, 1057732k absent, 258592k reserved, 4946k data, 940k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:1280 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] I-pipe 2.9-01: pipeline enabled.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 125829120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 2666.457 MHz processor.
[ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.91 BogoMIPS (lpj=26664570)
[ 0.032212] pid_max: default: 32768 minimum: 301
[ 0.046124] Security Framework initialized
[ 0.058456] AppArmor: AppArmor initialized
[ 0.072177] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.097914] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.120977] Mount-cache hash table entries: 256
[ 0.134742] Initializing cgroup subsys ns
[ 0.146828] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.173502] Initializing cgroup subsys cpuacct
[ 0.187753] Initializing cgroup subsys memory
[ 0.200873] Initializing cgroup subsys devices
[ 0.214246] Initializing cgroup subsys freezer
[ 0.227610] Initializing cgroup subsys net_cls
[ 0.241002] CPU: Physical Processor ID: 0
[ 0.253064] CPU: Processor Core ID: 0
[ 0.264092] mce: CPU supports 9 MCE banks
[ 0.276162] CPU0: Thermal monitoring enabled (TM1)
[ 0.290590] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.312527] ... version: 3
[ 0.324592] ... bit width: 48
[ 0.336917] ... generic registers: 4
[ 0.348982] ... value mask: 0000ffffffffffff
[ 0.364946] ... max period: 000000007fffffff
[ 0.380911] ... fixed-purpose events: 3
[ 0.392975] ... event mask: 000000070000000f
[ 0.409057] ACPI: Core revision 20101013
[ 0.452149] ftrace: allocating 21658 entries in 85 pages
[ 0.473904] Setting APIC routing to physical flat
[ 0.488481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.606546] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.624096] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.642688] ..... (found apic 0 pin 2) ...
[ 0.755620] ....... works.
[ 0.763800] CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 0.904246] Booting Node 0, Processors #1 #2 #3 #4 #5 Ok.
[ 1.815952] Booting Node 1, Processors #6 #7 #8 #9 #10 #11
[ 2.904211] Brought up 12 CPUs
[ 2.914024] Total of 12 processors activated (64001.38 BogoMIPS).
[ 2.939799] devtmpfs: initialized
[ 2.950023] regulator: core version 0.5
[ 2.961609] regulator: dummy:
[ 2.970829] Time: 8:28:48 Date: 05/05/11
[ 2.983192] NET: Registered protocol family 16
[ 2.997423] ACPI: bus type pci registered
[ 3.009577] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 3.037557] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 3.084430] PCI: Using configuration type 1 for base access
[ 3.101880] bio: create slab <bio-0> at 0
[ 3.116740] ACPI: Executed 1 blocks of module-level executable AML code
[ 3.184411] ACPI: SSDT 00000000bf79e0c0 029DC (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 3.209925] ACPI: Dynamic OEM Table Load:
[ 3.222136] ACPI: SSDT (null) 029DC (v01 DpgPmm P001Ist 00000011 INTL 20060113)
[ 3.247414] ACPI: SSDT 00000000bf7a0aa0 007FC (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 3.273697] ACPI: Dynamic OEM Table Load:
[ 3.285914] ACPI: SSDT (null) 007FC (v01 PmRef P001Cst 00003001 INTL 20060113)
[ 3.311132] ACPI: SSDT 00000000bf7a12a0 0054E (v01 PmRef Cpu0Tst 00003000 INTL 20060113)
[ 3.336568] ACPI: Dynamic OEM Table Load:
[ 3.348786] ACPI: SSDT (null) 0054E (v01 PmRef Cpu0Tst 00003000 INTL 20060113)
[ 3.395232] ACPI: Interpreter enabled
[ 3.406277] ACPI: (supports S0 S1 S4 S5)
[ 3.418390] ACPI: Using IOAPIC for interrupt routing
[ 3.434716] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 3.456624] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 3.484729] ACPI: No dock devices found.
[ 3.496554] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.524820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 3.543627] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 3.563504] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 3.583394] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 3.605391] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 3.627390] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 3.649383] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 3.674037] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003)
[ 3.696814] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003)
[ 3.719880] pci 0000:00:01.0: PCI bridge to [bus 0b-0b]
[ 3.735646] pci 0000:00:02.0: PCI bridge to [bus 0a-0a]
[ 3.751403] pci 0000:00:03.0: PCI bridge to [bus 09-09]
[ 3.768017] pci 0000:00:07.0: PCI bridge to [bus 08-08]
[ 3.783774] pci 0000:00:08.0: PCI bridge to [bus 07-07]
[ 3.799529] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 3.815286] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 3.831046] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 3.864166] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 3.894164] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 3.910059] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 3.954669] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 3.976233] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 3.991707] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 4.013257] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 4.035567] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 4.060682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 4.082237] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 4.103793] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 4.125385] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 4.149722] vgaarb: loaded
[ 4.157951] SCSI subsystem initialized
[ 4.169334] usbcore: registered new interface driver usbfs
[ 4.185844] usbcore: registered new interface driver hub
[ 4.201850] usbcore: registered new device driver usb
[ 4.217206] wmi: Mapper loaded
[ 4.226424] PCI: Using ACPI for IRQ routing
[ 4.239200] NetLabel: Initializing
[ 4.249459] NetLabel: domain hash size = 128
[ 4.262564] NetLabel: protocols = UNLABELED CIPSOv4
[ 4.278173] NetLabel: unlabeled traffic allowed by default
[ 4.294964] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 4.310820] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 4.330393] Switching to clocksource tsc
[ 4.343584] AppArmor: AppArmor Filesystem Enabled
[ 4.357764] pnp: PnP ACPI init
[ 4.366993] ACPI: bus type pnp registered
[ 4.381589] pnp: PnP ACPI: found 16 devices
[ 4.394183] ACPI: ACPI bus type pnp unregistered
[ 4.408098] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved
[ 4.427982] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
[ 4.447874] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
[ 4.467764] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
[ 4.487655] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved
[ 4.508585] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved
[ 4.528478] system 00:06: [io 0x0290-0x029f] has been reserved
[ 4.547172] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 4.564982] system 00:07: [io 0x0ca0-0x0caf] has been reserved
[ 4.582792] system 00:07: [io 0x0800-0x087f] has been reserved
[ 4.600605] system 00:07: [io 0x0500-0x057f] has been reserved
[ 4.618414] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 4.638305] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 4.658195] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 4.678087] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 4.699015] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 4.718909] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 4.738802] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 4.759729] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
[ 4.779618] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 4.801356] system 00:0f: [mem 0x00100000-0xbfffffff] could not be reserved
[ 4.822286] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved
[ 4.849053] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 4.869715] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 4.893272] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 4.916826] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 4.940383] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 4.958973] pci 0000:00:01.0: PCI bridge to [bus 0b-0b]
[ 4.974704] pci 0000:00:01.0: bridge window [io disabled]
[ 4.991734] pci 0000:00:01.0: bridge window [mem disabled]
[ 5.008765] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 5.027097] pci 0000:00:02.0: PCI bridge to [bus 0a-0a]
[ 5.043606] pci 0000:00:02.0: bridge window [io disabled]
[ 5.060638] pci 0000:00:02.0: bridge window [mem disabled]
[ 5.077669] pci 0000:00:02.0: bridge window [mem pref disabled]
[ 5.096001] pci 0000:00:03.0: PCI bridge to [bus 09-09]
[ 5.111727] pci 0000:00:03.0: bridge window [io disabled]
[ 5.128761] pci 0000:00:03.0: bridge window [mem disabled]
[ 5.145791] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 5.164125] pci 0000:00:07.0: PCI bridge to [bus 08-08]
[ 5.179850] pci 0000:00:07.0: bridge window [io disabled]
[ 5.196883] pci 0000:00:07.0: bridge window [mem disabled]
[ 5.213913] pci 0000:00:07.0: bridge window [mem pref disabled]
[ 5.232246] pci 0000:00:08.0: PCI bridge to [bus 07-07]
[ 5.247972] pci 0000:00:08.0: bridge window [io disabled]
[ 5.265005] pci 0000:00:08.0: bridge window [mem disabled]
[ 5.282036] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 5.301174] pci 0000:00:09.0: PCI bridge to [bus 06-06]
[ 5.316900] pci 0000:00:09.0: bridge window [io disabled]
[ 5.333933] pci 0000:00:09.0: bridge window [mem disabled]
[ 5.350963] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 5.369296] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 5.385024] pci 0000:00:0a.0: bridge window [io disabled]
[ 5.402056] pci 0000:00:0a.0: bridge window [mem disabled]
[ 5.419086] pci 0000:00:0a.0: bridge window [mem pref disabled]
[ 5.437419] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 5.453148] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 5.471480] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 5.491889] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 5.515188] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 5.530917] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 5.549247] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 5.570438] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 5.593736] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 5.609465] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 5.627797] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 5.648206] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 5.671505] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 5.687234] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 5.705567] pci 0000:00:1e.0: bridge window [mem 0xfaf00000-0xfb7fffff]
[ 5.725975] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 5.744349] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 5.761367] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.781520] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.801673] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 5.822620] NET: Registered protocol family 2
[ 5.836116] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 5.859630] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 5.883566] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 5.903886] TCP: Hash tables configured (established 524288 bind 65536)
[ 5.923765] TCP reno registered
[ 5.934161] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 5.952568] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 5.972409] NET: Registered protocol family 1
[ 5.985767] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 6.005123] Placing 64MB software IO TLB between ffff8800bae00000 - ffff8800bee00000
[ 6.028420] software IO TLB at phys 0xbae00000 - 0xbee00000
[ 6.045876] audit: initializing netlink socket (disabled)
[ 6.062123] type=2000 audit(1304584127.130:1): initialized
[ 6.088884] I-pipe: Domain Xenomai registered.
[ 6.102518] Xenomai: hal/x86_64 started.
[ 6.114349] Xenomai: scheduling class idle registered.
[ 6.129794] Xenomai: scheduling class rt registered.
[ 6.145957] Xenomai: real-time nucleus v2.5.6 (Wormhole Wizards) loaded.
[ 6.166302] Xenomai: SMI-enabled chipset found, but SMI workaround disabled
[ 6.166303] (check CONFIG_XENO_HW_SMI_WORKAROUND). You may encounter
[ 6.166304] high interrupt latencies!
[ 6.222214] Xenomai: starting native API services.
[ 6.236634] Xenomai: starting POSIX services.
[ 6.249786] Xenomai: starting RTDM services.
[ 6.263337] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 6.284003] VFS: Disk quotas dquot_6.5.2
[ 6.295869] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 6.315820] fuse init (API version 7.15)
[ 6.327723] msgmni has been set to 24053
[ 6.339780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 6.362036] io scheduler noop registered
[ 6.373840] io scheduler deadline registered
[ 6.386715] io scheduler cfq registered (default)
[ 6.401070] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.417852] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 6.437827] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 6.462429] ACPI: Power Button [PWRB]
[ 6.473511] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 6.495759] ACPI: Power Button [PWRF]
[ 6.508829] Linux agpgart interface v0.103
[ 6.521179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.560516] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.722533] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 7.242625] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 7.402521] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 7.543047] brd: module loaded
[ 7.552721] loop: module loaded
[ 7.562330] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.583788] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 7.599919] scsi0 : ata_piix
[ 7.608700] scsi1 : ata_piix
[ 7.618693] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 23
[ 7.640133] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 23
[ 7.661595] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.683057] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 7.699101] scsi2 : ata_piix
[ 7.707888] scsi3 : ata_piix
[ 7.717817] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21
[ 7.739272] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21
[ 7.760970] Fixed MDIO Bus: probed
[ 7.771246] PPP generic driver version 2.4.2
[ 7.784126] tun: Universal TUN/TAP device driver, 1.6
[ 7.799334] tun: (C) 1999-2004 Max Krasnyansky <maxk@domain.hid>
[ 7.817984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.837635] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.859104] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.874852] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 7.941979] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.959515] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcf9000
[ 7.991945] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 8.009334] hub 1-0:1.0: USB hub found
[ 8.020629] hub 1-0:1.0: 4 ports detected
[ 8.032780] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.054234] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.069978] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 8.112645] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.141963] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.159473] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfa000
[ 8.191930] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.209287] hub 2-0:1.0: USB hub found
[ 8.220575] hub 2-0:1.0: 8 ports detected
[ 8.232731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.251317] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.270457] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.282000] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.302971] ata4.00: ATA-7: SQF-S25M4-16G, VER2.A13, max UDMA/133
[ 8.302974] ata4.00: 30080736 sectors, multi 0: LBA48
[ 8.342965] ata4.00: configured for UDMA/133
[ 8.357105] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 8.362907] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 8.362923] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 8.406874] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 8.481940] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400
[ 8.499318] hub 3-0:1.0: USB hub found
[ 8.510616] hub 3-0:1.0: 2 ports detected
[ 8.511984] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 8.511997] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.542356] ata1.01: ATA-8: ST31000524NS, SN11, max UDMA/133
[ 8.542359] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 8.582350] ata1.01: configured for UDMA/133
[ 8.582482] scsi 0:0:1:0: Direct-Access ATA ST31000524NS SN11 PQ: 0 ANSI: 5
[ 8.582612] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 8.582635] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.582703] sd 0:0:1:0: [sda] Write Protect is off
[ 8.582720] scsi 3:0:0:0: Direct-Access ATA SQF-S25M4-16G VER2 PQ: 0 ANSI: 5
[ 8.582729] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.582831] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 8.582841] sd 3:0:0:0: [sdb] 30080736 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 8.582901] sd 3:0:0:0: [sdb] Write Protect is off
[ 8.582925] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.584615] sdb: sdb1
[ 8.619933] sda: sda1 sda2 < sda5 >
[ 8.836982] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 8.837017] sd 0:0:1:0: [sda] Attached SCSI disk
[ 8.837019] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 8.886204] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 8.901956] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 9.001887] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
[ 9.019259] hub 4-0:1.0: USB hub found
[ 9.030556] hub 4-0:1.0: 2 ports detected
[ 9.042702] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.064151] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 9.079910] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 9.181869] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
[ 9.199239] hub 5-0:1.0: USB hub found
[ 9.210533] hub 5-0:1.0: 2 ports detected
[ 9.222670] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.244132] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.259881] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 9.361867] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009880
[ 9.379245] hub 6-0:1.0: USB hub found
[ 9.390539] hub 6-0:1.0: 2 ports detected
[ 9.402683] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.424134] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.439886] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 9.531843] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009c00
[ 9.549213] hub 7-0:1.0: USB hub found
[ 9.560512] hub 7-0:1.0: 2 ports detected
[ 9.572653] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 9.594102] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 9.609853] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 9.711827] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a000
[ 9.729249] hub 8-0:1.0: USB hub found
[ 9.740536] hub 8-0:1.0: 2 ports detected
[ 9.831839] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 9.857332] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.872288] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.887563] mice: PS/2 mouse device common for all mice
[ 9.903354] rtc_cmos 00:03: RTC can wake from S4
[ 9.937089] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 10.031835] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 10.050175] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 10.070673] device-mapper: uevent: version 1.0.3
[ 10.084682] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@domain.hid
[ 10.110116] device-mapper: multipath: version 1.1.1 loaded
[ 10.126624] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 10.146326] cpuidle: using governor ladder
[ 10.158655] cpuidle: using governor menu
[ 10.170643] TCP cubic registered
[ 10.180468] NET: Registered protocol family 10
[ 10.194195] lo: Disabled Privacy Extensions
[ 10.206922] NET: Registered protocol family 17
[ 10.220314] Registering the dns_resolver key type
[ 10.234568] registered taskstats version 1
[ 10.248313] Magic number: 11:141:472
[ 10.259689] acpi LNXSYSTM:00: hash matches
[ 10.272049] rtc_cmos 00:03: setting system clock to 2011-05-05 08:28:55 UTC (1304584135)
[ 10.296383] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 10.314452] EDD information not available.
[ 10.326830] md: Waiting for all devices to be available before autodetect
[ 10.347240] md: If you don't use raid, use raid=noautodetect
[ 10.364368] md: Autodetecting RAID arrays.
[ 10.376698] md: Scanned 0 and added 0 devices.
[ 10.390061] md: autorun ...
[ 10.398487] md: ... autorun DONE.
[ 10.418738] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[ 10.445822] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (244)
[ 10.487922] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 10.508729] EXT4-fs (sda1): write access will be enabled during recovery
[ 10.633306] EXT4-fs (sda1): recovery complete
[ 10.648799] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.671998] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 10.719017] devtmpfs: mounted
[ 10.727987] Freeing unused kernel memory: 940k freed
[ 10.743087] Write protecting the kernel read-only data: 10240k
[ 10.760773] Freeing unused kernel memory: 328k freed
[ 10.775863] Freeing unused kernel memory: 1924k freed
[ 17.491241] hda-intel: no codecs found!
[ 31.812461] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[ 31.835959] IP: [<ffffffff81023c00>] __ipipe_get_ioapic_irq_vector+0x30/0x40
[ 31.857122] PGD 32bd90067 PUD 332714067 PMD 0
[ 31.870488] Oops: 0000 [#1] SMP
[ 31.880213] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.5/0000:02:00.0/irq
[ 31.902885] CPU 0
[ 31.908370] Modules linked in: binfmt_misc ppdev dm_crypt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss e1000e snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device shpchp snd ioatdma dca lp soundcore psmouse snd_page_alloc serio_raw parport
[ 31.993160]
[ 31.997632] Pid: 0, comm: swapper Not tainted 2.6.37.6 #1 System manufacturer System Product Name/Z8NA-D6(C)
[ 32.027194] RIP: 0010:[<ffffffff81023c00>] [<ffffffff81023c00>] __ipipe_get_ioapic_irq_vector+0x30/0x40
[ 32.055613] RSP: 0018:ffff8800bee03d08 EFLAGS: 00010046
[ 32.071502] RAX: 0000000000000000 RBX: ffffffff81c38740 RCX: 0000000000000000
[ 32.092874] RDX: 0000000000000000 RSI: 0000000000000020 RDI: 0000000000000020
[ 32.114246] RBP: ffff8800bee03d08 R08: ffff8800bee0e860 R09: ffff8800bee0e850
[ 32.135592] R10: ffff8800bee0e848 R11: 0000000000000002 R12: 0000000000032a60
[ 32.156940] R13: 000000000000e840 R14: ffffffff81c38748 R15: ffff8800bee0c460
[ 32.178313] FS: 0000000000000000(0000) GS:ffff8800bee00000(0000) knlGS:0000000000000000
[ 32.202545] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 32.219757] CR2: 0000000000000018 CR3: 0000000327910000 CR4: 00000000000006f0
[ 32.241105] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 32.262477] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 32.283850] Process swapper (pid: 0, threadinfo ffffffff81a00000, task ffffffff81a0b020)
[ 32.308056] Stack:
[ 32.314063] ffff8800bee03d58 ffffffff810c0615 ffffffff813ff0ca ffffffff810237d0
[ 32.336293] ffffffff81024d95 0000000000000000 0000000000000010 0000000000000017
[ 32.358525] ffff8800bee0c460 ffffffff81a01fd8 ffff8800bee03d68 ffffffff810c0e81
[ 32.380781] Call Trace:
[ 32.388087] <IRQ>
[ 32.394382] [<ffffffff810c0615>] __ipipe_sync_stage+0x195/0x1f3
[ 32.412375] [<ffffffff813ff0ca>] ? ata_bmdma_interrupt+0x18a/0x230
[ 32.431146] [<ffffffff810237d0>] ? smp_irq_move_cleanup_interrupt+0x0/0x130
[ 32.452259] [<ffffffff81024d95>] ? physflat_cpu_mask_to_apicid_and+0x35/0x70
[ 32.473631] [<ffffffff810c0e81>] __ipipe_unstall_root+0x31/0x40
[ 32.491625] [<ffffffff8105ad03>] __do_softirq+0x63/0x230
[ 32.507798] [<ffffffff8100442e>] call_softirq+0x1e/0x50
[ 32.523710] [<ffffffff81005e25>] do_softirq+0xa5/0xe0
[ 32.539101] [<ffffffff8105ac15>] irq_exit+0x85/0x90
[ 32.553976] [<ffffffff815a70fa>] do_IRQ+0x7a/0x100
[ 32.568588] [<ffffffff810c066d>] __ipipe_sync_stage+0x1ed/0x1f3
[ 32.586579] [<ffffffff815a7080>] ? do_IRQ+0x0/0x100
[ 32.601427] [<ffffffff810c0673>] ? __xirq_end+0x0/0xd
[ 32.616818] [<ffffffff815a7080>] ? do_IRQ+0x0/0x100
[ 32.631666] [<ffffffff810c0b0e>] __ipipe_walk_pipeline+0x10e/0x120
[ 32.650439] [<ffffffff8101ef2f>] __ipipe_handle_irq+0x13f/0x300
[ 32.668431] [<ffffffff810b9ce0>] ? __ipipe_ack_fasteoi_irq+0x0/0x20
[ 32.687465] [<ffffffff8159f953>] common_interrupt+0x13/0x2c
[ 32.704415] <EOI>
[ 32.710735] [<ffffffff8101f2ab>] ? __ipipe_halt_root+0x2b/0x40
[ 32.728468] [<ffffffff8100c01b>] default_idle+0x4b/0xb0
[ 32.744379] [<ffffffff81001e7c>] cpu_idle+0xcc/0x150
[ 32.759513] [<ffffffff815888b2>] rest_init+0x72/0x80
[ 32.774646] [<ffffffff81ab7e62>] start_kernel+0x43d/0x448
[ 32.791077] [<ffffffff81ab7321>] x86_64_start_reservations+0x131/0x135
[ 32.810890] [<ffffffff81ab7457>] x86_64_start_kernel+0x132/0x139
[ 32.829141] Code: 1f 44 00 00 8d 87 00 ef ff ff 83 f8 1f 77 0c 8d 87 ea ef ff ff c9 c3 0f 1f 40 00 e8 cb 61 09 00 31 d2 48 85 c0 74 04 48 8b 50 18 <0f> b6 42 18 c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48
[ 32.887280] RIP [<ffffffff81023c00>] __ipipe_get_ioapic_irq_vector+0x30/0x40
[ 32.908704] RSP <ffff8800bee03d08>
[ 32.919130] CR2: 0000000000000018
[ 32.929039] ---[ end trace 8c9c4ef442ceeb7d ]---
[ 32.942869] Kernel panic - not syncing: Fatal exception in interrupt
[ 32.961877] Pid: 0, comm: swapper Tainted: G D 2.6.37.6 #1
[ 32.980649] Call Trace:
[ 32.987981] <IRQ> [<ffffffff8159bdcf>] panic+0x91/0x1a1
[ 33.004207] [<ffffffff81055005>] ? kmsg_dump+0x185/0x1b0
[ 33.020380] [<ffffffff815a09b2>] oops_end+0xf2/0x100
[ 33.035513] [<ffffffff8103005b>] no_context+0xfb/0x260
[ 33.051167] [<ffffffff81576a9d>] ? packet_rcv_spkt+0x4d/0x1a0
[ 33.068636] [<ffffffff810302f5>] __bad_area_nosemaphore+0x135/0x1f0
[ 33.087670] [<ffffffff810303c3>] bad_area_nosemaphore+0x13/0x20
[ 33.105661] [<ffffffff815a32fc>] do_page_fault+0x33c/0x4c0
[ 33.122357] [<ffffffff812ec075>] ? blk_complete_request+0x25/0x30
[ 33.140867] [<ffffffff813c794f>] ? scsi_done+0x2f/0x70
[ 33.156521] [<ffffffff813f024a>] ? ata_scsi_qc_complete+0x6a/0x490
[ 33.175292] [<ffffffff813e8386>] ? ata_sg_clean+0x66/0xd0
[ 33.191725] [<ffffffff813e8480>] ? __ata_qc_complete+0x90/0x140
[ 33.209718] [<ffffffff8101f6b4>] __ipipe_handle_exception+0x144/0x3c0
[ 33.229270] [<ffffffff813fdc7b>] ? ata_hsm_qc_complete+0x4b/0x130
[ 33.247784] [<ffffffff8159fbe6>] page_fault+0x26/0x70
[ 33.263176] [<ffffffff81023c00>] ? __ipipe_get_ioapic_irq_vector+0x30/0x40
[ 33.284028] [<ffffffff81023bf5>] ? __ipipe_get_ioapic_irq_vector+0x25/0x40
[ 33.304882] [<ffffffff810c0615>] __ipipe_sync_stage+0x195/0x1f3
[ 33.322873] [<ffffffff813ff0ca>] ? ata_bmdma_interrupt+0x18a/0x230
[ 33.341646] [<ffffffff810237d0>] ? smp_irq_move_cleanup_interrupt+0x0/0x130
[ 33.362758] [<ffffffff81024d95>] ? physflat_cpu_mask_to_apicid_and+0x35/0x70
[ 33.384133] [<ffffffff810c0e81>] __ipipe_unstall_root+0x31/0x40
[ 33.402124] [<ffffffff8105ad03>] __do_softirq+0x63/0x230
[ 33.418298] [<ffffffff8100442e>] call_softirq+0x1e/0x50
[ 33.434209] [<ffffffff81005e25>] do_softirq+0xa5/0xe0
[ 33.449601] [<ffffffff8105ac15>] irq_exit+0x85/0x90
[ 33.464449] [<ffffffff815a70fa>] do_IRQ+0x7a/0x100
[ 33.479062] [<ffffffff810c066d>] __ipipe_sync_stage+0x1ed/0x1f3
[ 33.497055] [<ffffffff815a7080>] ? do_IRQ+0x0/0x100
[ 33.511926] [<ffffffff810c0673>] ? __xirq_end+0x0/0xd
[ 33.527318] [<ffffffff815a7080>] ? do_IRQ+0x0/0x100
[ 33.542166] [<ffffffff810c0b0e>] __ipipe_walk_pipeline+0x10e/0x120
[ 33.560938] [<ffffffff8101ef2f>] __ipipe_handle_irq+0x13f/0x300
[ 33.578932] [<ffffffff810b9ce0>] ? __ipipe_ack_fasteoi_irq+0x0/0x20
[ 33.597964] [<ffffffff8159f953>] common_interrupt+0x13/0x2c
[ 33.614915] <EOI> [<ffffffff8101f2ab>] ? __ipipe_halt_root+0x2b/0x40
[ 33.634469] [<ffffffff8100c01b>] default_idle+0x4b/0xb0
[ 33.650381] [<ffffffff81001e7c>] cpu_idle+0xcc/0x150
[ 33.665513] [<ffffffff815888b2>] rest_init+0x72/0x80
[ 33.680646] [<ffffffff81ab7e62>] start_kernel+0x43d/0x448
[ 33.697079] [<ffffffff81ab7321>] x86_64_start_reservations+0x131/0x135
[ 33.716892] [<ffffffff81ab7457>] x86_64_start_kernel+0x132/0x139
[-- Attachment #2: Type: text/html, Size: 56684 bytes --]
next prev parent reply other threads:[~2011-05-05 8:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-03 17:45 [Xenomai-help] Problem with the configuration of new system Franz Engel
2011-05-03 17:50 ` Gilles Chanteperdrix
2011-05-05 5:30 ` Franz Engel
2011-05-05 6:36 ` Jan Kiszka
2011-05-05 8:30 ` Franz Engel [this message]
2011-05-05 8:35 ` Jan Kiszka
2011-05-05 8:44 ` Franz Engel
2011-05-05 11:48 ` Franz Engel
2011-05-05 11:57 ` Jan Kiszka
2011-05-05 12:44 ` Jan Kiszka
2011-05-05 14:45 ` [Xenomai-help] [PATCH] ipipe: x86: Fix irq->vector lookup for IRQ_MOVE_CLEANUP_VECTOR Jan Kiszka
2011-05-06 17:12 ` [Xenomai-help] Problems with rt pipes after upgrade Thomas Schaefer
2011-05-11 14:46 ` Thomas Schaefer
2011-05-13 10:26 ` Philippe Gerum
2011-05-13 22:39 ` Thomas Schaefer
2011-05-14 17:21 ` Gilles Chanteperdrix
2011-05-14 17:25 ` Gilles Chanteperdrix
2011-05-15 15:21 ` Philippe Gerum
2011-05-15 15:26 ` Jan Kiszka
2011-05-15 15:29 ` Philippe Gerum
2011-05-15 15:32 ` Philippe Gerum
2011-05-16 16:13 ` Thomas Schaefer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=920250.14934.qm@domain.hid \
--to=franz_lambert_engel@domain.hid \
--cc=jan.kiszka@domain.hid \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.