From: Franz Engel <franz_lambert_engel@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: xenomai@xenomai.org
Subject: Re: [Xenomai-help] Problem with the configuration of new system
Date: Thu, 5 May 2011 06:30:43 +0100 (BST) [thread overview]
Message-ID: <216508.85461.qm@domain.hid> (raw)
In-Reply-To: <4DC0406C.7060402@domain.hid>
[-- Attachment #1: Type: text/plain, Size: 52141 bytes --]
Hi,
After some days to learn how I receive logs on another PC, here is my log. The problem is that the PC hangs after a few seconds.
pre { font-family: "Liberation Serif"; }p { margin-bottom: 0.21cm; }
#[?25l#[H#[J#[2;25HGNU GRUB version 1.98-1ubuntu10
[ 0.000000] Linux version 2.6.32.20-adeos (root@domain.hid) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Wed May 4 22:06:49 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.20-adeos root=/dev/sda1 ro console=ttyS0, 38400 console=tty0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e5000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf780000 (usable)
[ 0.000000] modified: 00000000bf78e000 - 00000000bf790000 (reserved)
[ 0.000000] modified: 00000000bf790000 - 00000000bf79e000 (ACPI data)
[ 0.000000] modified: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS)
[ 0.000000] modified: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
[ 0.000000] modified: 00000000bf7ed000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable)
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000
[ 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bf790540 05B3D (v01 S0081 S0081002 00000002 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bf79e000 00040
[ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 062810 APIC1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097)
[ 0.000000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 OEMB1507 20100628 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000bf798540 00168 (v01 062810 OEMSRAT 00000001 INTL 00000001)
[ 0.000000] ACPI: HPET 00000000bf7986b0 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bf7a17f0 0154F (v01 DpgPmm CpuPm 00000012 INTL 20060113)
[ 0.000000] ACPI: EINJ 00000000bf7986f0 00130 (v01 AMIER AMI_EINJ 20100628 MSFT 00000097)
[ 0.000000] ACPI: BERT 00000000bf798880 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097)
[ 0.000000] ACPI: ERST 00000000bf7988b0 001B0 (v01 AMIER AMI_ERST 20100628 MSFT 00000097)
[ 0.000000] ACPI: HEST 00000000bf798a60 000A8 (v01 AMIER ABC_HEST 20100628 MSFT 00000097)
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 32 -> Node 1
[ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 16 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 18 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 20 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 34 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 36 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 48 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 50 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 52 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-1c0000000
[ 0.000000] SRAT: Node 1 PXM 1 1c0000000-340000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 000000000004efff] pages 38
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 01c0000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001b35c24] TEXT DATA BSS ==> [0001000000 - 0001b35c24]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0001b36000 - 0001b362c4] BRK ==> [0001b36000 - 0001b362c4]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] Bootmem setup node 1 00000001c0000000-0000000340000000
[ 0.000000] NODE_DATA [00000001c0000000 - 00000001c0004fff]
[ 0.000000] bootmap [00000001c0005000 - 00000001c0034fff] pages 30
[ 0.000000] (6 early reservations) ==> bootmem [01c0000000 - 0340000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0001000000 - 0001b35c24] TEXT DATA BSS
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #4 [0001b36000 - 0001b362c4] BRK
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00340000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf780
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] 1: 0x001c0000 -> 0x00340000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 24 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000
[ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
[ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000
[ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000
[ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
[ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 64 pages/cpu @ffff88002da00000 s231896 r8192 d22056 u262144
[ 0.000000] pcpu-alloc: s231896 r8192 d22056 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 12 14 [0] 16 18 20 22 -- -- -- --
[ 0.000000] pcpu-alloc: [1] 06 07 08 09 10 11 13 15 [1] 17 19 21 23 -- -- -- --
[ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 3096746
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.20-adeos root=/dev/sda1 ro console=ttyS0, 38400 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.000000] Memory: 12317716k/13631488k available (5458k kernel code, 1057732k absent, 256040k reserved, 2598k data, 860k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:1008
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] I-pipe 2.7-03: pipeline enabled.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 125829120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.010000] Fast TSC calibration using PIT
[ 0.020000] Detected 2666.389 MHz processor.
[ 0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.77 BogoMIPS (lpj=26663890)
[ 0.032230] Security Framework initialized
[ 0.044567] SELinux: Disabled at boot.
[ 0.057149] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.082700] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.105764] Mount-cache hash table entries: 256
[ 0.119514] Initializing cgroup subsys ns
[ 0.131593] Initializing cgroup subsys cpuacct
[ 0.144957] Initializing cgroup subsys memory
[ 0.158071] Initializing cgroup subsys devices
[ 0.171450] Initializing cgroup subsys freezer
[ 0.184814] Initializing cgroup subsys net_cls
[ 0.198200] CPU: Physical Processor ID: 0
[ 0.210972] CPU: Processor Core ID: 0
[ 0.221997] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.236218] CPU: L2 cache: 256K
[ 0.245681] CPU: L3 cache: 12288K
[ 0.255668] CPU 0/0x0 -> Node 0
[ 0.265132] mce: CPU supports 9 MCE banks
[ 0.277203] CPU0: Thermal monitoring enabled (TM1)
[ 0.291628] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 0.309619] Performance Events: Westmere events, Intel PMU driver.
[ 0.328339] ... version: 3
[ 0.340403] ... bit width: 48
[ 0.352727] ... generic registers: 4
[ 0.364792] ... value mask: 0000ffffffffffff
[ 0.380757] ... max period: 000000007fffffff
[ 0.396721] ... fixed-purpose events: 3
[ 0.408786] ... event mask: 000000070000000f
[ 0.424757] ACPI: Core revision 20090903
[ 0.469062] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.486351] ftrace: allocating 21289 entries in 84 pages
[ 0.507848] Setting APIC routing to physical flat
[ 0.522421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.640479] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.658031] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.676621] ..... (found apic 0 pin 2) ...
[ 0.789836] ....... works.
[ 0.797996] CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 0.932178] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.957334] Initializing CPU#1
[ 1.102079] CPU: Physical Processor ID: 0
[ 1.102080] CPU: Processor Core ID: 1
[ 1.102082] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.102083] CPU: L2 cache: 256K
[ 1.102084] CPU: L3 cache: 12288K
[ 1.102086] CPU 1/0x2 -> Node 0
[ 1.102098] CPU1: Thermal monitoring enabled (TM1)
[ 1.102101] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 1.102181] CPU1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 1.230549] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 1.270018] Booting processor 2 APIC 0x4 ip 0x6000
[ 1.295002] Initializing CPU#2
[ 1.442085] CPU: Physical Processor ID: 0
[ 1.442086] CPU: Processor Core ID: 2
[ 1.442088] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.442090] CPU: L2 cache: 256K
[ 1.442091] CPU: L3 cache: 12288K
[ 1.442093] CPU 2/0x4 -> Node 0
[ 1.442103] CPU2: Thermal monitoring enabled (TM1)
[ 1.442106] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 1.442159] CPU2: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 1.571368] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 1.610109] Booting processor 3 APIC 0x10 ip 0x6000
[ 1.635355] Initializing CPU#3
[ 1.782092] CPU: Physical Processor ID: 0
[ 1.782093] CPU: Processor Core ID: 8
[ 1.782095] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.782097] CPU: L2 cache: 256K
[ 1.782098] CPU: L3 cache: 12288K
[ 1.782099] CPU 3/0x10 -> Node 0
[ 1.782110] CPU3: Thermal monitoring enabled (TM1)
[ 1.782113] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 1.782182] CPU3: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 1.910783] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 1.949526] Booting processor 4 APIC 0x12 ip 0x6000
[ 1.974723] Initializing CPU#4
[ 2.122099] CPU: Physical Processor ID: 0
[ 2.122100] CPU: Processor Core ID: 9
[ 2.122102] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 2.122103] CPU: L2 cache: 256K
[ 2.122104] CPU: L3 cache: 12288K
[ 2.122106] CPU 4/0x12 -> Node 0
[ 2.122116] CPU4: Thermal monitoring enabled (TM1)
[ 2.122119] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 2.122226] CPU4: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 2.250850] checking TSC synchronization [CPU#0 -> CPU#4]: passed.
[ 2.290424] Booting processor 5 APIC 0x14 ip 0x6000
[ 2.315621] Initializing CPU#5
[ 2.462105] CPU: Physical Processor ID: 0
[ 2.462106] CPU: Processor Core ID: 10
[ 2.462108] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 2.462109] CPU: L2 cache: 256K
[ 2.462110] CPU: L3 cache: 12288K
[ 2.462112] CPU 5/0x14 -> Node 0
[ 2.462122] CPU5: Thermal monitoring enabled (TM1)
[ 2.462125] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 2.462156] CPU5: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 2.591955] checking TSC synchronization [CPU#0 -> CPU#5]: passed.
[ 2.630710] Booting processor 6 APIC 0x20 ip 0x6000
[ 2.655943] Initializing CPU#6
[ 2.802112] CPU: Physical Processor ID: 1
[ 2.802114] CPU: Processor Core ID: 0
[ 2.802116] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 2.802117] CPU: L2 cache: 256K
[ 2.802118] CPU: L3 cache: 12288K
[ 2.802120] CPU 6/0x20 -> Node 1
[ 2.802133] CPU6: Thermal monitoring enabled (TM1)
[ 2.802136] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[ 2.802227] CPU6: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 2.931373] checking TSC synchronization [CPU#0 -> CPU#6]: passed.
[ 2.970096] Booting processor 7 APIC 0x22 ip 0x6000
[ 2.995335] Initializing CPU#7
[ 3.142120] CPU: Physical Processor ID: 1
[ 3.142122] CPU: Processor Core ID: 1
[ 3.142124] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.142126] CPU: L2 cache: 256K
[ 3.142127] CPU: L3 cache: 12288K
[ 3.142129] CPU 7/0x22 -> Node 1
[ 3.142142] CPU7: Thermal monitoring enabled (TM1)
[ 3.142145] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 3.142159] CPU7: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 3.270761] checking TSC synchronization [CPU#0 -> CPU#7]: passed.
[ 3.310266] Booting processor 8 APIC 0x24 ip 0x6000
[ 3.335504] Initializing CPU#8
[ 3.482127] CPU: Physical Processor ID: 1
[ 3.482128] CPU: Processor Core ID: 2
[ 3.482131] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.482132] CPU: L2 cache: 256K
[ 3.482133] CPU: L3 cache: 12288K
[ 3.482135] CPU 8/0x24 -> Node 1
[ 3.482148] CPU8: Thermal monitoring enabled (TM1)
[ 3.482151] CPU 8 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 3.482188] CPU8: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 3.612623] checking TSC synchronization [CPU#0 -> CPU#8]: passed.
[ 3.651341] Booting processor 9 APIC 0x30 ip 0x6000
[ 3.676585] Initializing CPU#9
[ 3.822134] CPU: Physical Processor ID: 1
[ 3.822135] CPU: Processor Core ID: 8
[ 3.822137] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3.822139] CPU: L2 cache: 256K
[ 3.822140] CPU: L3 cache: 12288K
[ 3.822142] CPU 9/0x30 -> Node 1
[ 3.822154] CPU9: Thermal monitoring enabled (TM1)
[ 3.822157] CPU 9 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 3.822263] CPU9: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 3.950895] checking TSC synchronization [CPU#0 -> CPU#9]: passed.
[ 3.989616] Booting processor 10 APIC 0x32 ip 0x6000
[ 4.015067] Initializing CPU#10
[ 4.162140] CPU: Physical Processor ID: 1
[ 4.162142] CPU: Processor Core ID: 9
[ 4.162144] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 4.162145] CPU: L2 cache: 256K
[ 4.162146] CPU: L3 cache: 12288K
[ 4.162148] CPU 10/0x32 -> Node 1
[ 4.162160] CPU10: Thermal monitoring enabled (TM1)
[ 4.162163] CPU 10 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 4.162193] CPU10: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 4.292157] checking TSC synchronization [CPU#0 -> CPU#10]: passed.
[ 4.331975] Booting processor 11 APIC 0x34 ip 0x6000
[ 4.357421] Initializing CPU#11
[ 4.502147] CPU: Physical Processor ID: 1
[ 4.502148] CPU: Processor Core ID: 10
[ 4.502151] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 4.502152] CPU: L2 cache: 256K
[ 4.502153] CPU: L3 cache: 12288K
[ 4.502155] CPU 11/0x34 -> Node 1
[ 4.502167] CPU11: Thermal monitoring enabled (TM1)
[ 4.502170] CPU 11 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[ 4.502256] CPU11: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02
[ 4.633186] checking TSC synchronization [CPU#0 -> CPU#11]: passed.
[ 4.672119] Brought up 12 CPUs
[ 4.681339] Total of 12 processors activated (64001.30 BogoMIPS).
[ 4.706578] devtmpfs: initialized
[ 4.716876] regulator: core version 0.5
[ 4.728446] Time: 5:20:28 Date: 05/05/11
[ 4.740813] NET: Registered protocol family 16
[ 4.754275] ACPI: bus type pci registered
[ 4.766400] PCI: Using configuration type 1 for base access
[ 4.783996] bio: create slab <bio-0> at 0
[ 4.799128] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[ 4.833092] ACPI: Executed 1 blocks of module-level executable AML code
[ 4.860361] ACPI: Interpreter enabled
[ 4.871406] ACPI: (supports S0 S1 S4 S5)
[ 4.883520] ACPI: Using IOAPIC for interrupt routing
[ 4.908162] ACPI Warning: Incorrect checksum in table [OEMB] - EC, should be E9 (20090903/tbutils-314)
[ 4.936524] ACPI: No dock devices found.
[ 4.948474] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 4.962969] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 4.981285] pci 0000:00:00.0: PME# disabled
[ 4.993923] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 5.012254] pci 0000:00:01.0: PME# disabled
[ 5.024915] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 5.043246] pci 0000:00:02.0: PME# disabled
[ 5.055906] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 5.075150] pci 0000:00:03.0: PME# disabled
[ 5.087814] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 5.106142] pci 0000:00:07.0: PME# disabled
[ 5.118803] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 5.137135] pci 0000:00:08.0: PME# disabled
[ 5.149795] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 5.168128] pci 0000:00:09.0: PME# disabled
[ 5.180789] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 5.199121] pci 0000:00:0a.0: PME# disabled
[ 5.212657] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 5.230973] pci 0000:00:1a.7: PME# disabled
[ 5.243652] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 5.261966] pci 0000:00:1b.0: PME# disabled
[ 5.274628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 5.292960] pci 0000:00:1c.0: PME# disabled
[ 5.305625] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 5.323951] pci 0000:00:1c.4: PME# disabled
[ 5.337474] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 5.355802] pci 0000:00:1c.5: PME# disabled
[ 5.368737] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 5.387058] pci 0000:00:1d.7: PME# disabled
[ 5.399777] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 5.422808] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 5.443480] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003)
[ 5.466256] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003)
[ 5.489605] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 5.507938] pci 0000:03:00.0: PME# disabled
[ 5.520766] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 5.539087] pci 0000:02:00.0: PME# disabled
[ 5.551828] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 5.571714] pci 0000:01:01.0: PME# disabled
[ 5.585143] pci 0000:00:1e.0: transparent bridge
[ 5.636763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 5.658367] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 5.673888] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 5.695494] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 5.717105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 5.742273] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 5.763879] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 5.785485] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 5.807081] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 5.831410] vgaarb: loaded
[ 5.840403] SCSI subsystem initialized
[ 5.852025] usbcore: registered new interface driver usbfs
[ 5.868546] usbcore: registered new interface driver hub
[ 5.884558] usbcore: registered new device driver usb
[ 5.899855] PCI: Using ACPI for IRQ routing
[ 5.912620] NetLabel: Initializing
[ 5.922882] NetLabel: domain hash size = 128
[ 5.936013] NetLabel: protocols = UNLABELED CIPSOv4
[ 5.950969] NetLabel: unlabeled traffic allowed by default
[ 6.012194] Switching to clocksource tsc
[ 6.025806] pnp: PnP ACPI init
[ 6.035040] ACPI: bus type pnp registered
[ 6.050579] pnp: PnP ACPI: found 16 devices
[ 6.063184] ACPI: ACPI bus type pnp unregistered
[ 6.077101] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
[ 6.099455] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[ 6.120907] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
[ 6.142356] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
[ 6.163808] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved
[ 6.186325] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
[ 6.207778] system 00:06: ioport range 0x290-0x29f has been reserved
[ 6.226888] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 6.245997] system 00:07: ioport range 0xca0-0xcaf has been reserved
[ 6.265106] system 00:07: ioport range 0x800-0x87f has been reserved
[ 6.284219] system 00:07: ioport range 0x500-0x57f could not be reserved
[ 6.304367] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 6.325819] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 6.347270] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 6.369503] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 6.392017] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 6.413469] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 6.434921] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 6.454809] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 6.474700] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 6.495631] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
[ 6.517628] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved
[ 6.544880] pci 0000:00:01.0: PCI bridge, secondary bus 0000:0b
[ 6.562687] pci 0000:00:01.0: IO window: disabled
[ 6.577380] pci 0000:00:01.0: MEM window: disabled
[ 6.592328] pci 0000:00:01.0: PREFETCH window: disabled
[ 6.609386] pci 0000:00:02.0: PCI bridge, secondary bus 0000:0a
[ 6.627196] pci 0000:00:02.0: IO window: disabled
[ 6.641886] pci 0000:00:02.0: MEM window: disabled
[ 6.656837] pci 0000:00:02.0: PREFETCH window: disabled
[ 6.673089] pci 0000:00:03.0: PCI bridge, secondary bus 0000:09
[ 6.690897] pci 0000:00:03.0: IO window: disabled
[ 6.705589] pci 0000:00:03.0: MEM window: disabled
[ 6.720540] pci 0000:00:03.0: PREFETCH window: disabled
[ 6.736792] pci 0000:00:07.0: PCI bridge, secondary bus 0000:08
[ 6.754598] pci 0000:00:07.0: IO window: disabled
[ 6.769293] pci 0000:00:07.0: MEM window: disabled
[ 6.784240] pci 0000:00:07.0: PREFETCH window: disabled
[ 6.800495] pci 0000:00:08.0: PCI bridge, secondary bus 0000:07
[ 6.818301] pci 0000:00:08.0: IO window: disabled
[ 6.832994] pci 0000:00:08.0: MEM window: disabled
[ 6.847943] pci 0000:00:08.0: PREFETCH window: disabled
[ 6.864873] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06
[ 6.882680] pci 0000:00:09.0: IO window: disabled
[ 6.898281] pci 0000:00:09.0: MEM window: disabled
[ 6.913231] pci 0000:00:09.0: PREFETCH window: disabled
[ 6.929485] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:05
[ 6.947291] pci 0000:00:0a.0: IO window: disabled
[ 6.961984] pci 0000:00:0a.0: MEM window: disabled
[ 6.976934] pci 0000:00:0a.0: PREFETCH window: disabled
[ 6.993188] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 7.010995] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 7.026988] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff
[ 7.045317] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff
[ 7.068098] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 7.085905] pci 0000:00:1c.4: IO window: 0xe000-0xefff
[ 7.101896] pci 0000:00:1c.4: MEM window: 0xfbe00000-0xfbefffff
[ 7.121138] pci 0000:00:1c.4: PREFETCH window: 0x000000c0400000-0x000000c05fffff
[ 7.143915] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 7.161723] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 7.177715] pci 0000:00:1c.5: MEM window: 0xfbd00000-0xfbdfffff
[ 7.196045] pci 0000:00:1c.5: PREFETCH window: 0x000000c0600000-0x000000c07fffff
[ 7.218823] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 7.236630] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 7.252622] pci 0000:00:1e.0: MEM window: 0xfaf00000-0xfb7fffff
[ 7.270953] pci 0000:00:1e.0: PREFETCH window: disabled
[ 7.287257] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 7.304293] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.324445] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.344601] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 7.364803] NET: Registered protocol family 2
[ 7.379035] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 7.402427] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 7.426387] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 7.446711] TCP: Hash tables configured (established 524288 bind 65536)
[ 7.466610] TCP reno registered
[ 7.476223] NET: Registered protocol family 1
[ 7.490116] Scanning for low memory corruption every 60 seconds
[ 7.508033] audit: initializing netlink socket (disabled)
[ 7.524292] type=2000 audit(1304572824.310:1): initialized
[ 7.547286] I-pipe: Domain Xenomai registered.
[ 7.560860] Xenomai: hal/x86_64 started.
[ 7.572692] Xenomai: scheduling class idle registered.
[ 7.588163] Xenomai: scheduling class rt registered.
[ 7.603997] Xenomai: real-time nucleus v2.5.5.2 (Ghosts) loaded.
[ 7.622256] Xenomai: SMI-enabled chipset found, but SMI workaround disabled
[ 7.622257] (check CONFIG_XENO_HW_SMI_WORKAROUND). You may encounter
[ 7.622258] high interrupt latencies!
[ 7.678156] Xenomai: starting native API services.
[ 7.692584] Xenomai: starting POSIX services.
[ 7.705734] Xenomai: starting RTDM services.
[ 7.719281] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 7.739692] VFS: Disk quotas dquot_6.5.2
[ 7.751541] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 7.771396] fuse init (API version 7.13)
[ 7.783286] msgmni has been set to 24058
[ 7.795630] alg: No test for stdrng (krng)
[ 7.808037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 7.830313] io scheduler noop registered
[ 7.842139] io scheduler anticipatory registered
[ 7.856024] io scheduler deadline registered
[ 7.868898] io scheduler cfq registered (default)
[ 7.884098] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.900937] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 7.920915] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 7.946045] ACPI: Power Button [PWRB]
[ 7.957123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.979374] ACPI: Power Button [PWRF]
[ 7.991221] Linux agpgart interface v0.103
[ 8.003558] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.022491] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.040637] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 8.058945] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 8.075820] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 8.093428] brd: module loaded
[ 8.103001] loop: module loaded
[ 8.112528] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 8.135897] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.157353] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 8.173298] scsi0 : ata_piix
[ 8.182069] scsi1 : ata_piix
[ 8.192092] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 23
[ 8.213542] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 23
[ 8.235011] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 8.256467] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 8.272399] scsi2 : ata_piix
[ 8.281142] scsi3 : ata_piix
[ 8.291113] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21
[ 8.312551] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21
[ 8.334214] Fixed MDIO Bus: probed
[ 8.344501] PPP generic driver version 2.4.2
[ 8.357374] tun: Universal TUN/TAP device driver, 1.6
[ 8.372585] tun: (C) 1999-2004 Max Krasnyansky <maxk@domain.hid>
[ 8.391227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.410879] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.432355] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 8.448092] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 8.470370] ehci_hcd 0000:00:1a.7: debug port 1
[ 8.487907] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcf9000
[ 8.535314] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 8.552680] usb usb1: configuration #1 chosen from 1 choice
[ 8.569463] hub 1-0:1.0: USB hub found
[ 8.580754] hub 1-0:1.0: 4 ports detected
[ 8.592892] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.614363] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 8.630096] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 8.652374] ehci_hcd 0000:00:1d.7: debug port 1
[ 8.669883] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfa000
[ 8.684998] ata3: SATA link down (SStatus 0 SControl 300)
[ 8.724046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 8.741375] usb usb2: configuration #1 chosen from 1 choice
[ 8.758148] hub 2-0:1.0: USB hub found
[ 8.769440] hub 2-0:1.0: 8 ports detected
[ 8.781577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.800184] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.819304] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.840769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 8.844090] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.875126] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 8.876327] ata4.00: ATA-7: SQF-S25M4-16G, VER2.A13, max UDMA/133
[ 8.876331] ata4.00: 30080736 sectors, multi 0: LBA48
[ 8.915202] ata4.00: configured for UDMA/133
[ 8.954770] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 8.964060] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400
[ 8.964155] usb usb3: configuration #1 chosen from 1 choice
[ 8.964178] hub 3-0:1.0: USB hub found
[ 8.964183] hub 3-0:1.0: 2 ports detected
[ 8.964222] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 8.964230] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 8.964255] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 8.964285] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
[ 8.964349] usb usb4: configuration #1 chosen from 1 choice
[ 8.964368] hub 4-0:1.0: USB hub found
[ 8.964372] hub 4-0:1.0: 2 ports detected
[ 8.964407] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.964414] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.964435] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 8.964461] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
[ 8.964525] usb usb5: configuration #1 chosen from 1 choice
[ 8.964541] hub 5-0:1.0: USB hub found
[ 8.964545] hub 5-0:1.0: 2 ports detected
[ 8.964585] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.964593] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.964615] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 8.964646] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009880
[ 8.964715] usb usb6: configuration #1 chosen from 1 choice
[ 8.964731] hub 6-0:1.0: USB hub found
[ 8.964735] hub 6-0:1.0: 2 ports detected
[ 8.964770] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.964777] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.964798] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 8.964824] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009c00
[ 8.964893] usb usb7: configuration #1 chosen from 1 choice
[ 8.964908] hub 7-0:1.0: USB hub found
[ 8.964912] hub 7-0:1.0: 2 ports detected
[ 8.964947] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 8.964958] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.964982] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 8.965007] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a000
[ 8.965066] usb usb8: configuration #1 chosen from 1 choice
[ 8.965087] hub 8-0:1.0: USB hub found
[ 8.965091] hub 8-0:1.0: 2 ports detected
[ 8.965159] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 8.968210] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 8.968214] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 8.968273] mice: PS/2 mouse device common for all mice
[ 8.968350] rtc_cmos 00:03: RTC can wake from S4
[ 8.968375] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 8.968402] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 8.968505] device-mapper: uevent: version 1.0.3
[ 8.968596] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@domain.hid[ 8.968828] device-mapper: multipath: version 1.1.0 loaded
[ 8.968830] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 8.968896] cpuidle: using governor ladder
[ 8.968898] cpuidle: using governor menu
[ 8.969164] TCP cubic registered
[ 8.969269] NET: Registered protocol family 10
[ 8.969691] lo: Disabled Privacy Extensions
[ 8.969872] NET: Registered protocol family 17
[ 8.969951] registered taskstats version 1
[ 8.970679] Magic number: 11:167:314
[ 8.990758] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 9.094089] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 9.094104] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.114562] ata1.01: ATA-8: ST31000524NS, SN11, max UDMA/133
[ 9.114564] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 9.154566] ata1.01: configured for UDMA/133
[ 9.154658] scsi 0:0:1:0: Direct-Access ATA ST31000524NS SN11 PQ: 0 ANSI: 5
[ 9.154759] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 9.154828] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 9.154858] sd 0:0:1:0: [sda] Write Protect is off
[ 9.154875] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.125101] rtc_cmos 00:03: setting system clock to 2011-05-05 05:20:32 UTC (1304572832)
[ 10.125122] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 10.125207] scsi 3:0:0:0: Direct-Access ATA SQF-S25M4-16G VER2 PQ: 0 ANSI: 5
[ 10.125283] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 10.125324] sd 3:0:0:0: [sdb] 30080736 512-byte logical blocks: (15.4 GB/14.3 GiB)
[ 10.125353] sd 3:0:0:0: [sdb] Write Protect is off
[ 10.125370] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.271150] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 10.289217] EDD information not available.
[ 10.301718] sda:
[ 10.307096] sdb: sda1 sda2 < sdb1
[ 10.318631] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 10.336230] sda5 >
[ 10.342922] sd 0:0:1:0: [sda] Attached SCSI disk
[ 10.356843] md: Waiting for all devices to be available before autodetect
[ 10.377259] md: If you don't use raid, use raid=noautodetect
[ 10.394392] md: Autodetecting RAID arrays.
[ 10.406743] md: Scanned 0 and added 0 devices.
[ 10.420130] md: autorun ...
[ 10.428556] md: ... autorun DONE.
[ 10.461397] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240).
[ 10.486509] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240).
[ 10.604006] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 10.623515] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 10.661763] devtmpfs: mounted
[ 10.670742] Freeing unused kernel memory: 860k freed
[ 10.685824] Write protecting the kernel read-only data: 7512k
[ 16.860358] ioatdma 0000:00:16.0: channel error register unreachable
[ 16.879490] ioatdma 0000:00:16.0: channel enumeration error
[ 16.896315] ioatdma 0000:00:16.0: Intel(R) I/OAT DMA Engine init failed
[ 16.916342] ioatdma 0000:00:16.1: channel error register unreachable
[ 16.935511] ioatdma 0000:00:16.1: channel enumeration error
[ 16.952321] ioatdma 0000:00:16.1: Intel(R) I/OAT DMA Engine init failed
[ 16.972318] ioatdma 0000:00:16.2: channel error register unreachable
[ 16.991482] ioatdma 0000:00:16.2: channel enumeration error
[ 17.008303] ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine init failed
[ 17.028297] ioatdma 0000:00:16.3: channel error register unreachable
[ 17.047417] ioatdma 0000:00:16.3: channel enumeration error
[ 17.064236] ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init failed
[ 17.084233] ioatdma 0000:00:16.4: channel error register unreachable
[ 17.103390] ioatdma 0000:00:16.4: channel enumeration error
[ 17.120212] ioatdma 0000:00:16.4: Intel(R) I/OAT DMA Engine init failed
[ 17.140198] ioatdma 0000:00:16.5: channel error register unreachable
[ 17.159369] ioatdma 0000:00:16.5: channel enumeration error
[ 17.176188] ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed
[ 17.196177] ioatdma 0000:00:16.6: channel error register unreachable
[ 17.215348] ioatdma 0000:00:16.6: channel enumeration error
[ 17.232170] ioatdma 0000:00:16.6: Intel(R) I/OAT DMA Engine init failed
[ 17.252157] ioatdma 0000:00:16.7: channel error register unreachable
[ 17.271333] ioatdma 0000:00:16.7: channel enumeration error
[ 17.288149] ioatdma 0000:00:16.7: Intel(R) I/OAT DMA Engine init failed
[ 17.693112] hda-intel: no codecs found!
[ 51.470109] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
[ 51.493659] IP: [<ffffffff81025a05>] __ipipe_get_ioapic_irq_vector+0x25/0x30
[ 51.514824] PGD 0
[ 51.520908] Thread overran stack, or stack corrupted
[ 51.535780] Oops: 0000 [#1] SMP
[ 51.545558] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.5/host3/target3:0:0/3:0:0:0/block/sdb/uevent
[ 51.574990] CPU 0
[ 51.581073] Modules linked in: binfmt_misc ppdev dm_crypt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore psmouse e1000e snd_page_alloc ioatdma dca serio_raw lp parport
[ 51.664227] Pid: 0, comm: swapper Not tainted 2.6.32.20-adeos #1 System Product Name
[ 51.687418] RIP: 0010:[<ffffffff81025a05>] [<ffffffff81025a05>] __ipipe_get_ioapic_irq_vector+0x25/0x30
[ 51.715864] RSP: 0000:ffff88002da03eb8 EFLAGS: 00010046
[ 51.731775] RAX: 0000000000000000 RBX: ffffffff81988740 RCX: 0000000000000800
[ 51.753147] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000020
[ 51.774520] RBP: ffff88002da03eb8 R08: 0000000000000004 R09: ffff88002da0ed60
[ 51.795893] R10: ffff88002da0ed50 R11: ffff88002da0ed48 R12: 0000000000000000
[ 51.817266] R13: 0000000000000000 R14: 000000000000ed40 R15: ffff88002da0cf00
[ 51.838639] FS: 0000000000000000(0000) GS:ffff88002da00000(0000) knlGS:0000000000000000
[ 51.862871] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 51.880084] CR2: 000000000000001c CR3: 0000000001001000 CR4: 00000000000006f0
[ 51.901457] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 51.922830] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 51.944203] Process swapper (pid: 0, threadinfo ffffffff81760000, task ffffffff81767600)
[ 51.968434] Stack:
[ 51.974468] ffff88002da03f28 ffffffff810b98c6 ffffffff81988740 ffffffff810271d0
[ 51.996257] <0> 000000000000cf00 0000000000032f60 000000000000ed40 ffffffff81988748
[ 52.019448] <0> ffff88033847d300 ffffffff81988740 ffffffff81988740 0000000000000015
[ 52.043188] Call Trace:
[ 52.050522] <IRQ>
[ 52.056865] [<ffffffff810b98c6>] __ipipe_sync_stage+0x206/0x25c
[ 52.074859] [<ffffffff810271d0>] ? smp_irq_move_cleanup_interrupt+0x0/0x130
[ 52.095971] [<ffffffff810b9da0>] __ipipe_walk_pipeline+0x100/0x110
[ 52.114744] [<ffffffff8102b614>] __ipipe_handle_irq+0x134/0x320
[ 52.132737] [<ffffffff810b34c0>] ? __ipipe_ack_fasteoi_irq+0x0/0x20
[ 52.151772] [<ffffffff8100cb13>] common_interrupt+0x13/0x2c
[ 52.168720] <EOI>
[ 52.175065] [<ffffffff8102b9cb>] ? __ipipe_halt_root+0x2b/0x40
[ 52.192799] [<ffffffff8101445d>] ? default_idle+0x3d/0x90
[ 52.209231] [<ffffffff8100aeb4>] ? cpu_idle+0xc4/0x120
[ 52.224885] [<ffffffff815386ab>] ? rest_init+0x6b/0x80
[ 52.240538] [<ffffffff81819d8a>] ? start_kernel+0x43a/0x446
[ 52.257489] [<ffffffff81819315>] ? x86_64_start_reservations+0x125/0x129
[ 52.277822] [<ffffffff818193fd>] ? x86_64_start_kernel+0xe4/0xeb
[ 52.296073] Code: 42 48 c9 c3 66 90 55 48 89 e5 0f 1f 44 00 00 8d 87 00 ef ff ff 83 f8 1f 77 0c 8d 87 ea ef ff ff c9 c3 0f 1f 40 00 e8 bb ff ff ff <0f> b6 40 1c c9 c3 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55
[ 52.355744] RIP [<ffffffff81025a05>] __ipipe_get_ioapic_irq_vector+0x25/0x30
[ 52.377170] RSP <ffff88002da03eb8>
[ 52.387625] CR2: 000000000000001c
[ 52.397559] ---[ end trace fe2daa7b4f437364 ]---
[ 52.411388] Kernel panic - not syncing: Attempted to kill the idle task!
[ 52.431460] Pid: 0, comm: swapper Tainted: G D 2.6.32.20-adeos #1
[ 52.451795] Call Trace:
[ 52.459125] <IRQ> [<ffffffff81549b9e>] panic+0x78/0x134
[ 52.475352] [<ffffffff81058640>] do_exit+0x760/0x850
[ 52.490485] [<ffffffff8154e3b2>] oops_end+0xb2/0x100
[ 52.505617] [<ffffffff81030d82>] no_context+0xf2/0x260
[ 52.521268] [<ffffffff81031015>] __bad_area_nosemaphore+0x125/0x1e0
[ 52.540302] [<ffffffff8139d095>] ? scsi_softirq_done+0x145/0x170
[ 52.558553] [<ffffffff810310e3>] bad_area_nosemaphore+0x13/0x20
[ 52.576546] [<ffffffff8154fecb>] do_page_fault+0x2eb/0x3c0
[ 52.593240] [<ffffffff8102bde0>] __ipipe_handle_exception+0x140/0x3d0
[ 52.612791] [<ffffffff8154d686>] page_fault+0x26/0x70
[ 52.628184] [<ffffffff81025a05>] ? __ipipe_get_ioapic_irq_vector+0x25/0x30
[ 52.649037] [<ffffffff81025a05>] ? __ipipe_get_ioapic_irq_vector+0x25/0x30
[ 52.669889] [<ffffffff810b98c6>] __ipipe_sync_stage+0x206/0x25c
[ 52.687884] [<ffffffff810271d0>] ? smp_irq_move_cleanup_interrupt+0x0/0x130
[ 52.708994] [<ffffffff810b9da0>] __ipipe_walk_pipeline+0x100/0x110
[ 52.727767] [<ffffffff8102b614>] __ipipe_handle_irq+0x134/0x320
[ 52.745761] [<ffffffff810b34c0>] ? __ipipe_ack_fasteoi_irq+0x0/0x20
[ 52.764795] [<ffffffff8100cb13>] common_interrupt+0x13/0x2c
[ 52.781744] <EOI> [<ffffffff8102b9cb>] ? __ipipe_halt_root+0x2b/0x40
[ 52.801351] [<ffffffff8101445d>] ? default_idle+0x3d/0x90
[ 52.817782] [<ffffffff8100aeb4>] ? cpu_idle+0xc4/0x120
[ 52.833435] [<ffffffff815386ab>] ? rest_init+0x6b/0x80
[ 52.849087] [<ffffffff81819d8a>] ? start_kernel+0x43a/0x446
[ 52.866041] [<ffffffff81819315>] ? x86_64_start_reservations+0x125/0x129
[ 52.886374] [<ffffffff818193fd>] ? x86_64_start_kernel+0xe4/0xeb
Does somebody know what is wrong?
regards,
franz
--- Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> schrieb am Di, 3.5.2011:
Von: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Betreff: Re: [Xenomai-help] Problem with the configuration of new system
An: "Franz Engel" <franz_lambert_engel@domain.hid>
CC: xenomai@xenomai.org
Datum: Dienstag, 3. Mai, 2011 19:50 Uhr
On 05/03/2011 07:45 PM, Franz Engel wrote:
> Hello,
>
> I've a problem with my new system. I already patched the system with
> adeos and also with the preperation skript of Xenomai. For the first
> configuration I use a kernel-configuration where xenomai is disabled
> and only ipipe is enabled. Even when I start the system it boots
> correct and it runs a few seconds (long enough to recognize the
> network), then the system freezs and two leds of the keyboard begins
> blinking.
This is a kernel oops. Please send us the kernel logs.
--
Gilles.
[-- Attachment #2: Type: text/html, Size: 53354 bytes --]
next prev parent reply other threads:[~2011-05-05 5:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-03 17:45 [Xenomai-help] Problem with the configuration of new system Franz Engel
2011-05-03 17:50 ` Gilles Chanteperdrix
2011-05-05 5:30 ` Franz Engel [this message]
2011-05-05 6:36 ` Jan Kiszka
2011-05-05 8:30 ` Franz Engel
2011-05-05 8:35 ` Jan Kiszka
2011-05-05 8:44 ` Franz Engel
2011-05-05 11:48 ` Franz Engel
2011-05-05 11:57 ` Jan Kiszka
2011-05-05 12:44 ` Jan Kiszka
2011-05-05 14:45 ` [Xenomai-help] [PATCH] ipipe: x86: Fix irq->vector lookup for IRQ_MOVE_CLEANUP_VECTOR Jan Kiszka
2011-05-06 17:12 ` [Xenomai-help] Problems with rt pipes after upgrade Thomas Schaefer
2011-05-11 14:46 ` Thomas Schaefer
2011-05-13 10:26 ` Philippe Gerum
2011-05-13 22:39 ` Thomas Schaefer
2011-05-14 17:21 ` Gilles Chanteperdrix
2011-05-14 17:25 ` Gilles Chanteperdrix
2011-05-15 15:21 ` Philippe Gerum
2011-05-15 15:26 ` Jan Kiszka
2011-05-15 15:29 ` Philippe Gerum
2011-05-15 15:32 ` Philippe Gerum
2011-05-16 16:13 ` Thomas Schaefer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=216508.85461.qm@domain.hid \
--to=franz_lambert_engel@domain.hid \
--cc=gilles.chanteperdrix@xenomai.org \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.