[PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

From: icenowy@aosc.xyz (Icenowy Zheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi
Date: Fri, 19 Aug 2016 08:35:14 +0800	[thread overview]
Message-ID: <92631471566914@web15j.yandex.ru> (raw)
In-Reply-To: <1471543337-6938-3-git-send-email-hdegoede@redhat.com>

19.08.2016, 02:07, "Hans de Goede" <hdegoede@redhat.com>:
> Just like with a13/a23/a33 most a31 tablets are derived from the same
> reference design. Add a .dtsi file with all the common bits to avoid
> endless copy and pasting of these.
>
> The sun6i-reference-design-tablet.dtsi this commit adds is a copy
> of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
> removed / left in sun6i-a31s-colorfly-e708-q1.dts.

Thanks! I will soon rebase my dt of Viewsonic Viewpad 133Q (a 13.3" A31s
tablet) on the reference design.

It makes it more tidy.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> ?arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts | 147 +--------------------
> ?...8-q1.dts => sun6i-reference-design-tablet.dtsi} | 26 +---
> ?2 files changed, 2 insertions(+), 171 deletions(-)
> ?copy arch/arm/boot/dts/{sun6i-a31s-colorfly-e708-q1.dts => sun6i-reference-design-tablet.dtsi} (90%)
>
> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> index 34d8710..882a4d8 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> +++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> @@ -42,32 +42,11 @@
>
> ?/dts-v1/;
> ?#include "sun6i-a31s.dtsi"
> -#include "sunxi-common-regulators.dtsi"
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/pinctrl/sun4i-a10.h>
> +#include "sun6i-reference-design-tablet.dtsi"
>
> ?/ {
> ?????????model = "Colorfly E708 Q1 tablet";
> ?????????compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
> -
> - aliases {
> - serial0 = &uart0;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -};
> -
> -&cpu0 {
> - cpu-supply = <&reg_dcdc3>;
> -};
> -
> -&ehci0 {
> - /* rtl8188etv wifi is connected here */
> - status = "okay";
> ?};
>
> ?&lradc {
> @@ -82,136 +61,12 @@
> ?????????};
> ?};
>
> -&mmc0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
> - vmmc-supply = <&reg_dcdc1>;
> - bus-width = <4>;
> - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
> - cd-inverted;
> - status = "okay";
> -};
> -
> -&pio {
> - mmc0_cd_pin_e708_q1: mmc0_cd_pin at 0 {
> - allwinner,pins = "PA8";
> - allwinner,function = "gpio_in";
> - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> - };
> -
> - usb0_id_detect_pin: usb0_id_detect_pin at 0 {
> - allwinner,pins = "PA15";
> - allwinner,function = "gpio_in";
> - allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
> - };
> -};
> -
> -&p2wi {
> - status = "okay";
> -
> - axp22x: pmic at 68 {
> - compatible = "x-powers,axp221";
> - reg = <0x68>;
> - interrupt-parent = <&nmi_intc>;
> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> - drivevbus-supply = <&reg_vcc5v0>;
> - x-powers,drive-vbus-en;
> - };
> -};
> -
> -#include "axp22x.dtsi"
> -
> -&reg_aldo3 {
> - regulator-always-on;
> - regulator-min-microvolt = <2700000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "avcc";
> -};
> -
> -&reg_dc1sw {
> - regulator-name = "vcc-lcd";
> -};
> -
> -&reg_dc5ldo {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-cpus"; /* This is an educated guess */
> -};
> -
> -&reg_dcdc1 {
> - regulator-always-on;
> - regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-name = "vcc-3v0";
> -};
> -
> -&reg_dcdc2 {
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-gpu";
> -};
> -
> -&reg_dcdc3 {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-cpu";
> -};
> -
> -&reg_dcdc4 {
> - regulator-always-on;
> - regulator-min-microvolt = <700000>;
> - regulator-max-microvolt = <1320000>;
> - regulator-name = "vdd-sys-dll";
> -};
> -
> -&reg_dcdc5 {
> - regulator-always-on;
> - regulator-min-microvolt = <1500000>;
> - regulator-max-microvolt = <1500000>;
> - regulator-name = "vcc-dram";
> -};
> -
> -&reg_dldo1 {
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-name = "vcc-wifi";
> -};
> -
> ?&reg_dldo2 {
> ?????????regulator-min-microvolt = <1800000>;
> ?????????regulator-max-microvolt = <1800000>;
> ?????????regulator-name = "vcc-pg";
> ?};
>
> -&reg_drivevbus {
> - regulator-name = "usb0-vbus";
> - status = "okay";
> -};
> -
> ?&simplefb_lcd {
> - vcc-lcd-supply = <&reg_dc1sw>;
> ?????????vcc-pg-supply = <&reg_dldo2>;
> ?};
> -
> -&usb_otg {
> - dr_mode = "otg";
> - status = "okay";
> -};
> -
> -&usb_power_supply {
> - status = "okay";
> -};
> -
> -&usbphy {
> - pinctrl-names = "default";
> - pinctrl-0 = <&usb0_id_detect_pin>;
> - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
> - usb0_vbus_power-supply = <&usb_power_supply>;
> - usb0_vbus-supply = <&reg_drivevbus>;
> - usb1_vbus-supply = <&reg_dldo1>;
> - status = "okay";
> -};
> diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> similarity index 90%
> copy from arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> copy to arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> index 34d8710..0c43430 100644
> --- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
> +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
> @@ -40,8 +40,6 @@
> ??* OTHER DEALINGS IN THE SOFTWARE.
> ??*/
>
> -/dts-v1/;
> -#include "sun6i-a31s.dtsi"
> ?#include "sunxi-common-regulators.dtsi"
>
> ?#include <dt-bindings/gpio/gpio.h>
> @@ -49,9 +47,6 @@
> ?#include <dt-bindings/pinctrl/sun4i-a10.h>
>
> ?/ {
> - model = "Colorfly E708 Q1 tablet";
> - compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
> -
> ?????????aliases {
> ?????????????????serial0 = &uart0;
> ?????????};
> @@ -66,20 +61,8 @@
> ?};
>
> ?&ehci0 {
> - /* rtl8188etv wifi is connected here */
> - status = "okay";
> -};
> -
> -&lradc {
> - vref-supply = <&reg_aldo3>;
> + /* Wifi is connected here */
> ?????????status = "okay";
> -
> - button at 1000 {
> - label = "Home";
> - linux,code = <KEY_HOMEPAGE>;
> - channel = <0>;
> - voltage = <1000000>;
> - };
> ?};
>
> ?&mmc0 {
> @@ -181,12 +164,6 @@
> ?????????regulator-name = "vcc-wifi";
> ?};
>
> -&reg_dldo2 {
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-name = "vcc-pg";
> -};
> -
> ?&reg_drivevbus {
> ?????????regulator-name = "usb0-vbus";
> ?????????status = "okay";
> @@ -194,7 +171,6 @@
>
> ?&simplefb_lcd {
> ?????????vcc-lcd-supply = <&reg_dc1sw>;
> - vcc-pg-supply = <&reg_dldo2>;
> ?};
>
> ?&usb_otg {
> --
> 2.7.4
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel