* CONFIG_PREEMPT_RT Patch and UDP/IP on Ethernet in real time.
@ 2007-07-16 14:28 M. Koehrer
0 siblings, 0 replies; only message in thread
From: M. Koehrer @ 2007-07-16 14:28 UTC (permalink / raw)
To: linux-kernel
Hi everybody,
I have a question concerning Ingo Molnar's realtime preempt patch.
This patch is great go get low latency on timer threads and a really
good real time behaviour.
I want to connect an external, embedded device via Ethernet (UDP/IP)
to my Linux PC. This communication should be in real time as well.
For this I have a separate network adapter in my PC that is used
solely for this UDP Ethernet traffic.
However, I think all Ethernet traffic is be handled by
the soft IRQ threads [softirq-net-rx] [softirq-net-tx] but I do
not see a way to do real time networking via my dedicated network adapter.
How can I get this UDP networking real time capable?
I use kernel 2.6.21.6 and the related realtime preempt patch.
However, this is a general question that is not related to a certain kernel
version.
Any feedback is welcome.
Thanks a lot!
Regards
Mathias
--
Mathias Koehrer
mathias_koehrer@arcor.de
Viel oder wenig? Schnell oder langsam? Unbegrenzt surfen + telefonieren
ohne Zeit- und Volumenbegrenzung? DAS TOP ANGEBOT JETZT bei Arcor: günstig
und schnell mit DSL - das All-Inclusive-Paket für clevere Doppel-Sparer,
nur 39,85 inkl. DSL- und ISDN-Grundgebühr!
http://www.arcor.de/rd/emf-dsl-2
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-07-16 14:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-16 14:28 CONFIG_PREEMPT_RT Patch and UDP/IP on Ethernet in real time M. Koehrer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.