From: dth@lin-gen.com (Danny ter Haar)
To: linux-kernel@vger.kernel.org
Subject: Re: PRoblem with pcnet32 under 2.4.0 , was :Drivers under 2.4
Date: Fri, 12 Jan 2001 12:16:05 +0000 (UTC) [thread overview]
Message-ID: <93msi4$s1v$1@voyager.cistron.net> (raw)
In-Reply-To: <20010112125010.A6371@lin-gen.com> <Pine.LNX.4.30.0101121357370.707-100000@prime.sun.ac.za>
Hans Grobler <grobh@sun.ac.za> wrote:
>> lspci -vx output:
>What about the other devices?
ok, here's the full listing :
00:00.0 Host bridge: Cyrix Corporation PCI Master
Flags: bus master, medium devsel, latency 0
00: 78 10 01 00 07 00 80 02 00 00 00 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0e.0 VGA compatible controller: Intergraphics Systems CyberPro 5000 (rev 02)
(prog-if 00 [VGA])
Subsystem: Unknown device 0280:7000
Flags: medium devsel, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00: ea 10 00 50 03 00 00 02 02 00 00 03 04 40 00 00
10: 00 00 00 fd 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 80 02 00 70
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00
00:0f.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (
rev 42)
Subsystem: Advanced Micro Devices [AMD]: Unknown device 2000
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at fce0 [size=32]
Memory at fedffc00 (32-bit, non-prefetchable) [size=32]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [40] Power Management version 1
00: 22 10 00 20 07 00 90 02 42 00 00 02 00 40 00 00
10: e1 fc 00 00 00 fc df fe 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 22 10 00 20
30: 00 00 00 00 40 00 00 00 00 00 00 00 09 01 18 18
00:12.1 Bridge: Cyrix Corporation 5530 SMI [Kahlua]
Flags: medium devsel
Memory at 40012000 (32-bit, non-prefetchable) [size=256]
00: 78 10 01 01 02 00 80 02 00 00 80 06 00 00 00 00
10: 00 20 01 40 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.2 IDE interface: Cyrix Corporation 5530 IDE [Kahlua] (prog-if 00 [])
Flags: medium devsel
I/O ports at fc00 [size=16]
00: 78 10 02 01 01 00 80 02 00 00 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:12.3 Multimedia audio controller: Cyrix Corporation 5530 Audio [Kahlua]
Flags: bus master, medium devsel, latency 0
Memory at 40011000 (32-bit, non-prefetchable) [size=128]
00: 78 10 03 01 06 00 80 02 00 00 01 04 00 00 00 00
10: 00 10 01 40 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:13.0 USB Controller: Compaq Computer Corporation: Unknown device a0f8 (rev 06
) (prog-if 10 [OHCI])
Subsystem: Compaq Computer Corporation: Unknown device a0f8
Flags: medium devsel, IRQ 10
Memory at fedfe000 (32-bit, non-prefetchable) [size=4K]
00: 11 0e f8 a0 13 00 80 02 06 10 03 0c 00 40 00 00
10: 00 e0 df fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e f8 a0
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 50
00:14.0 Multimedia video controller: Zoran Corporation ZR36120 (rev 03)
Subsystem: Optibase Ltd: Unknown device 5000
Flags: fast devsel, IRQ 10
Memory at fedfd000 (32-bit, non-prefetchable) [size=4K]
00: de 11 20 61 02 00 00 00 03 00 00 04 00 40 00 00
10: 00 d0 df fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 55 12 00 50
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 02 10
The last one is an plugin pci mpeg2 decoder (which is optional)
>> irq 0: 16840 timer irq 9: 0 acpi, PCnet/FAST III
>
>Ok, this may not mean much, but have you tried compiling without acpi?
>Just to remove some variables...
yesterdays trials were with 2.4.0-ac4 which did not include acpi.
Wil re-compile (slow!! :) wihout acpi and re-try.
Danny
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2001-01-12 12:16 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-01-09 9:12 Failure building 2.4 while running 2.4. Success in building 2.4 while running 2.2 Silviu Marin-Caea
2001-01-09 10:17 ` Alessandro Suardi
2001-01-09 10:33 ` Failure building 2.4 while running 2.4. Success in building 2.4 Alan Cox
2001-01-09 18:20 ` Failure building 2.4 while running 2.4. There is no such thing Silviu Marin-Caea
2001-01-09 18:43 ` Alan Cox
2001-01-09 19:57 ` Drivers under 2.4 Dennis
2001-01-09 20:13 ` suser checks in 2.2.x Bosko Radivojevic
2001-01-09 18:39 ` Arnaldo Carvalho de Melo
2001-01-10 18:22 ` Drivers under 2.4 Dennis
2001-01-10 20:01 ` Hans Grobler
2001-01-10 21:37 ` Dennis
2001-01-10 21:38 ` Andi Kleen
2001-01-10 22:08 ` Hans Grobler
2001-01-11 10:24 ` Danny ter Haar
2001-01-11 10:31 ` Andi Kleen
2001-01-11 10:58 ` Danny ter Haar
2001-01-11 11:36 ` Andrew Morton
2001-01-11 11:58 ` Danny ter Haar
2001-01-11 14:00 ` Danny ter Haar
2001-01-11 14:32 ` Jeff Garzik
2001-01-11 16:33 ` Danny ter Haar
2001-01-11 16:44 ` Hans Grobler
2001-01-12 11:50 ` PRoblem with pcnet32 under 2.4.0 , was :Drivers " Danny ter Haar
2001-01-12 12:01 ` Hans Grobler
2001-01-12 12:16 ` Danny ter Haar [this message]
2001-01-12 22:33 ` Thomas Bogendoerfer
2001-01-15 16:29 ` Danny ter Haar
2001-01-11 12:56 ` Drivers " Alan Cox
2001-01-09 10:28 ` Failure building 2.4 while running 2.4. Success in building 2.4 while running 2.2 Alan Cox
2001-01-09 16:10 ` [rlug] " Eugen
2001-01-09 19:01 ` J Sloan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='93msi4$s1v$1@voyager.cistron.net' \
--to=dth@lin-gen.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.