* [PATCH 0/2] ARM: shmobile: r8a7793: Add PFC to DT @ 2015-11-09 1:33 ` Simon Horman 0 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-09 1:33 UTC (permalink / raw) To: linux-arm-kernel This short series adds PFC support to the r8a7793 and its gose board. The PFC driver is already present and is the same driver as the r8a7791. Simon Horman (2): ARM: shmobile: r8a7793: Add PFC to DT ARM: shmobile: gose: Configure PFC in DT arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/r8a7793.dtsi | 6 ++++++ 2 files changed, 37 insertions(+) -- 2.1.4 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] ARM: shmobile: r8a7793: Add PFC to DT @ 2015-11-09 1:33 ` Simon Horman 0 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-09 1:33 UTC (permalink / raw) To: linux-arm-kernel This short series adds PFC support to the r8a7793 and its gose board. The PFC driver is already present and is the same driver as the r8a7791. Simon Horman (2): ARM: shmobile: r8a7793: Add PFC to DT ARM: shmobile: gose: Configure PFC in DT arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/r8a7793.dtsi | 6 ++++++ 2 files changed, 37 insertions(+) -- 2.1.4 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] ARM: shmobile: r8a7793: Add PFC to DT 2015-11-09 1:33 ` Simon Horman @ 2015-11-09 1:33 ` Simon Horman -1 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-09 1:33 UTC (permalink / raw) To: linux-arm-kernel Instantiate PFC device in r8a7793 DT. Based on similar work for the r8a7791 by Magnus Damm. Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7793.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index fcafa87616fa..6597207cd55e 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -114,6 +114,12 @@ power-domains = <&cpg_clocks>; }; + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7793"; + reg = <0 0xe6060000 0 0x250>; + #gpio-range-cells = <3>; + }; + scif0: serial@e6e60000 { compatible = "renesas,scif-r8a7793", "renesas,scif"; reg = <0 0xe6e60000 0 64>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] ARM: shmobile: r8a7793: Add PFC to DT @ 2015-11-09 1:33 ` Simon Horman 0 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-09 1:33 UTC (permalink / raw) To: linux-arm-kernel Instantiate PFC device in r8a7793 DT. Based on similar work for the r8a7791 by Magnus Damm. Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7793.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index fcafa87616fa..6597207cd55e 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -114,6 +114,12 @@ power-domains = <&cpg_clocks>; }; + pfc: pfc at e6060000 { + compatible = "renesas,pfc-r8a7793"; + reg = <0 0xe6060000 0 0x250>; + #gpio-range-cells = <3>; + }; + scif0: serial at e6e60000 { compatible = "renesas,scif-r8a7793", "renesas,scif"; reg = <0 0xe6e60000 0 64>; -- 2.1.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT 2015-11-09 1:33 ` Simon Horman @ 2015-11-09 1:33 ` Simon Horman -1 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-09 1:33 UTC (permalink / raw) To: linux-arm-kernel Configure PFC for the already enabled scif and ethernet devices in the device tree for the gose board. Based on similar work for the koelsch board by Laurent Pinchart and Sergei Shtylyov. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f6ab..1575ef759047 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -37,7 +37,32 @@ clock-frequency = <20000000>; }; +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; +}; + ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; @@ -55,9 +80,15 @@ }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; &scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT @ 2015-11-09 1:33 ` Simon Horman 0 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-09 1:33 UTC (permalink / raw) To: linux-arm-kernel Configure PFC for the already enabled scif and ethernet devices in the device tree for the gose board. Based on similar work for the koelsch board by Laurent Pinchart and Sergei Shtylyov. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f6ab..1575ef759047 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -37,7 +37,32 @@ clock-frequency = <20000000>; }; +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; +}; + ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; renesas,ether-link-active-low; status = "okay"; @@ -55,9 +80,15 @@ }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; &scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; }; -- 2.1.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT 2015-11-09 1:33 ` Simon Horman @ 2015-11-09 14:16 ` Laurent Pinchart -1 siblings, 0 replies; 10+ messages in thread From: Laurent Pinchart @ 2015-11-09 14:16 UTC (permalink / raw) To: linux-arm-kernel Hi Simon, On Monday 09 November 2015 10:33:19 Simon Horman wrote: > Configure PFC for the already enabled scif and ethernet devices > in the device tree for the gose board. > > Based on similar work for the koelsch board by Laurent Pinchart and > Sergei Shtylyov. I can't really comment on the patch due to lack of a schematics for the Goose board, but it looks good to me in principle. Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > --- > arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7793-gose.dts > b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f6ab..1575ef759047 > 100644 > --- a/arch/arm/boot/dts/r8a7793-gose.dts > +++ b/arch/arm/boot/dts/r8a7793-gose.dts > @@ -37,7 +37,32 @@ > clock-frequency = <20000000>; > }; > > +&pfc { > + scif0_pins: serial0 { > + renesas,groups = "scif0_data_d"; > + renesas,function = "scif0"; > + }; > + > + scif1_pins: serial1 { > + renesas,groups = "scif1_data_d"; > + renesas,function = "scif1"; > + }; > + > + ether_pins: ether { > + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; > + renesas,function = "eth"; > + }; > + > + phy1_pins: phy1 { > + renesas,groups = "intc_irq0"; > + renesas,function = "intc"; > + }; > +}; > + > ðer { > + pinctrl-0 = <ðer_pins &phy1_pins>; > + pinctrl-names = "default"; > + > phy-handle = <&phy1>; > renesas,ether-link-active-low; > status = "okay"; > @@ -55,9 +80,15 @@ > }; > > &scif0 { > + pinctrl-0 = <&scif0_pins>; > + pinctrl-names = "default"; > + > status = "okay"; > }; > > &scif1 { > + pinctrl-0 = <&scif1_pins>; > + pinctrl-names = "default"; > + > status = "okay"; > }; -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT @ 2015-11-09 14:16 ` Laurent Pinchart 0 siblings, 0 replies; 10+ messages in thread From: Laurent Pinchart @ 2015-11-09 14:16 UTC (permalink / raw) To: linux-arm-kernel Hi Simon, On Monday 09 November 2015 10:33:19 Simon Horman wrote: > Configure PFC for the already enabled scif and ethernet devices > in the device tree for the gose board. > > Based on similar work for the koelsch board by Laurent Pinchart and > Sergei Shtylyov. I can't really comment on the patch due to lack of a schematics for the Goose board, but it looks good to me in principle. Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > --- > arch/arm/boot/dts/r8a7793-gose.dts | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7793-gose.dts > b/arch/arm/boot/dts/r8a7793-gose.dts index 96443ec5f6ab..1575ef759047 > 100644 > --- a/arch/arm/boot/dts/r8a7793-gose.dts > +++ b/arch/arm/boot/dts/r8a7793-gose.dts > @@ -37,7 +37,32 @@ > clock-frequency = <20000000>; > }; > > +&pfc { > + scif0_pins: serial0 { > + renesas,groups = "scif0_data_d"; > + renesas,function = "scif0"; > + }; > + > + scif1_pins: serial1 { > + renesas,groups = "scif1_data_d"; > + renesas,function = "scif1"; > + }; > + > + ether_pins: ether { > + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; > + renesas,function = "eth"; > + }; > + > + phy1_pins: phy1 { > + renesas,groups = "intc_irq0"; > + renesas,function = "intc"; > + }; > +}; > + > ðer { > + pinctrl-0 = <ðer_pins &phy1_pins>; > + pinctrl-names = "default"; > + > phy-handle = <&phy1>; > renesas,ether-link-active-low; > status = "okay"; > @@ -55,9 +80,15 @@ > }; > > &scif0 { > + pinctrl-0 = <&scif0_pins>; > + pinctrl-names = "default"; > + > status = "okay"; > }; > > &scif1 { > + pinctrl-0 = <&scif1_pins>; > + pinctrl-names = "default"; > + > status = "okay"; > }; -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT 2015-11-09 14:16 ` Laurent Pinchart @ 2015-11-10 0:13 ` Simon Horman -1 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-10 0:13 UTC (permalink / raw) To: linux-arm-kernel On Mon, Nov 09, 2015 at 04:16:45PM +0200, Laurent Pinchart wrote: > Hi Simon, > > On Monday 09 November 2015 10:33:19 Simon Horman wrote: > > Configure PFC for the already enabled scif and ethernet devices > > in the device tree for the gose board. > > > > Based on similar work for the koelsch board by Laurent Pinchart and > > Sergei Shtylyov. > > I can't really comment on the patch due to lack of a schematics for the Goose > board, but it looks good to me in principle. > > Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Thanks, I have queued up both patches of this series. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT @ 2015-11-10 0:13 ` Simon Horman 0 siblings, 0 replies; 10+ messages in thread From: Simon Horman @ 2015-11-10 0:13 UTC (permalink / raw) To: linux-arm-kernel On Mon, Nov 09, 2015 at 04:16:45PM +0200, Laurent Pinchart wrote: > Hi Simon, > > On Monday 09 November 2015 10:33:19 Simon Horman wrote: > > Configure PFC for the already enabled scif and ethernet devices > > in the device tree for the gose board. > > > > Based on similar work for the koelsch board by Laurent Pinchart and > > Sergei Shtylyov. > > I can't really comment on the patch due to lack of a schematics for the Goose > board, but it looks good to me in principle. > > Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Thanks, I have queued up both patches of this series. ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-11-10 0:13 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2015-11-09 1:33 [PATCH 0/2] ARM: shmobile: r8a7793: Add PFC to DT Simon Horman 2015-11-09 1:33 ` Simon Horman 2015-11-09 1:33 ` [PATCH 1/2] " Simon Horman 2015-11-09 1:33 ` Simon Horman 2015-11-09 1:33 ` [PATCH 2/2] ARM: shmobile: gose: Configure PFC in DT Simon Horman 2015-11-09 1:33 ` Simon Horman 2015-11-09 14:16 ` Laurent Pinchart 2015-11-09 14:16 ` Laurent Pinchart 2015-11-10 0:13 ` Simon Horman 2015-11-10 0:13 ` Simon Horman
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.