All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Marcin Szycik <marcin.szycik@linux.intel.com>,
	intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org,
	Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
	Przemek Kitszel <przemyslaw.kitszel@intel.com>
Subject: Re: [Intel-wired-lan] [PATCH net] ice: fix setting RSS VSI hash for E830
Date: Mon, 12 Jan 2026 11:15:44 +0000	[thread overview]
Message-ID: <979e42ca-66fb-4ca6-b68f-c10b4e441369@linux.dev> (raw)
In-Reply-To: <1e162d79-20a2-4de3-8862-aa4fbe842132@linux.intel.com>

On 12/01/2026 09:36, Marcin Szycik wrote:
> 
> 
> On 09.01.2026 17:44, Vadim Fedorenko wrote:
>> On 09/01/2026 08:53, Marcin Szycik wrote:
>>> ice_set_rss_hfunc() performs a VSI update, in which it sets hashing
>>> function, leaving other VSI options unchanged. However, ::q_opt_flags is
>>> mistakenly set to the value of another field, instead of its original
>>> value, probably due to a typo. What happens next is hardware-dependent:
>>>
>>> On E810, only the first bit is meaningful (see
>>> ICE_AQ_VSI_Q_OPT_PE_FLTR_EN) and can potentially end up in a different
>>> state than before VSI update.
>>>
>>> On E830, some of the remaining bits are not reserved. Setting them
>>> to some unrelated values can cause the firmware to reject the update
>>> because of invalid settings, or worse - succeed.
>>>
>>> Reproducer:
>>>     sudo ethtool -X $PF1 equal 8
>>>
>>> Output in dmesg:
>>>     Failed to configure RSS hash for VSI 6, error -5
>>>
>>> Fixes: 352e9bf23813 ("ice: enable symmetric-xor RSS for Toeplitz hash function")
>>> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
>>> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
>>> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
>>> ---
>>>    drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
>>> index cf8ba5a85384..08268f1a03da 100644
>>> --- a/drivers/net/ethernet/intel/ice/ice_main.c
>>> +++ b/drivers/net/ethernet/intel/ice/ice_main.c
>>> @@ -8038,7 +8038,7 @@ int ice_set_rss_hfunc(struct ice_vsi *vsi, u8 hfunc)
>>>        ctx->info.q_opt_rss |=
>>>            FIELD_PREP(ICE_AQ_VSI_Q_OPT_RSS_HASH_M, hfunc);
>>>        ctx->info.q_opt_tc = vsi->info.q_opt_tc;
>>> -    ctx->info.q_opt_flags = vsi->info.q_opt_rss;
>>> +    ctx->info.q_opt_flags = vsi->info.q_opt_flags;
>>
>> The very same typo pattern is in ice_vc_handle_rss_cfg() in
>> ice/virt/rss.c
>>
>> I believe both places have to be fixed.
> 
> Hmm... where exactly? ice_vc_rss_hash_update() (called from ice_vc_handle_rss_cfg()) looks correct.

Sorry, it was fixed in 3a6d87e2eaac ("ice: implement GTP RSS context
tracking and configuration") when the logic was moved to
ice_vc_rss_hash_update(), but this code was never backported, the
problem exists in 6.18...

> 
> Thanks for reviewing,
> Marcin
> 
>>
>>>          err = ice_update_vsi(hw, vsi->idx, ctx, NULL);
>>>        if (err) {
>>
> 


WARNING: multiple messages have this Message-ID (diff)
From: Vadim Fedorenko <vadim.fedorenko@linux.dev>
To: Marcin Szycik <marcin.szycik@linux.intel.com>,
	intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org,
	Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
	Przemek Kitszel <przemyslaw.kitszel@intel.com>
Subject: Re: [PATCH net] ice: fix setting RSS VSI hash for E830
Date: Mon, 12 Jan 2026 11:15:44 +0000	[thread overview]
Message-ID: <979e42ca-66fb-4ca6-b68f-c10b4e441369@linux.dev> (raw)
In-Reply-To: <1e162d79-20a2-4de3-8862-aa4fbe842132@linux.intel.com>

On 12/01/2026 09:36, Marcin Szycik wrote:
> 
> 
> On 09.01.2026 17:44, Vadim Fedorenko wrote:
>> On 09/01/2026 08:53, Marcin Szycik wrote:
>>> ice_set_rss_hfunc() performs a VSI update, in which it sets hashing
>>> function, leaving other VSI options unchanged. However, ::q_opt_flags is
>>> mistakenly set to the value of another field, instead of its original
>>> value, probably due to a typo. What happens next is hardware-dependent:
>>>
>>> On E810, only the first bit is meaningful (see
>>> ICE_AQ_VSI_Q_OPT_PE_FLTR_EN) and can potentially end up in a different
>>> state than before VSI update.
>>>
>>> On E830, some of the remaining bits are not reserved. Setting them
>>> to some unrelated values can cause the firmware to reject the update
>>> because of invalid settings, or worse - succeed.
>>>
>>> Reproducer:
>>>     sudo ethtool -X $PF1 equal 8
>>>
>>> Output in dmesg:
>>>     Failed to configure RSS hash for VSI 6, error -5
>>>
>>> Fixes: 352e9bf23813 ("ice: enable symmetric-xor RSS for Toeplitz hash function")
>>> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
>>> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
>>> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
>>> ---
>>>    drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
>>> index cf8ba5a85384..08268f1a03da 100644
>>> --- a/drivers/net/ethernet/intel/ice/ice_main.c
>>> +++ b/drivers/net/ethernet/intel/ice/ice_main.c
>>> @@ -8038,7 +8038,7 @@ int ice_set_rss_hfunc(struct ice_vsi *vsi, u8 hfunc)
>>>        ctx->info.q_opt_rss |=
>>>            FIELD_PREP(ICE_AQ_VSI_Q_OPT_RSS_HASH_M, hfunc);
>>>        ctx->info.q_opt_tc = vsi->info.q_opt_tc;
>>> -    ctx->info.q_opt_flags = vsi->info.q_opt_rss;
>>> +    ctx->info.q_opt_flags = vsi->info.q_opt_flags;
>>
>> The very same typo pattern is in ice_vc_handle_rss_cfg() in
>> ice/virt/rss.c
>>
>> I believe both places have to be fixed.
> 
> Hmm... where exactly? ice_vc_rss_hash_update() (called from ice_vc_handle_rss_cfg()) looks correct.

Sorry, it was fixed in 3a6d87e2eaac ("ice: implement GTP RSS context
tracking and configuration") when the logic was moved to
ice_vc_rss_hash_update(), but this code was never backported, the
problem exists in 6.18...

> 
> Thanks for reviewing,
> Marcin
> 
>>
>>>          err = ice_update_vsi(hw, vsi->idx, ctx, NULL);
>>>        if (err) {
>>
> 


  reply	other threads:[~2026-01-12 11:16 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-09  8:53 [Intel-wired-lan] [PATCH net] ice: fix setting RSS VSI hash for E830 Marcin Szycik
2026-01-09  8:53 ` Marcin Szycik
2026-01-09 16:44 ` [Intel-wired-lan] " Vadim Fedorenko
2026-01-09 16:44   ` Vadim Fedorenko
2026-01-12  9:36   ` [Intel-wired-lan] " Marcin Szycik
2026-01-12  9:36     ` Marcin Szycik
2026-01-12 11:15     ` Vadim Fedorenko [this message]
2026-01-12 11:15       ` Vadim Fedorenko
2026-01-29 11:24       ` [Intel-wired-lan] " Marcin Szycik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=979e42ca-66fb-4ca6-b68f-c10b4e441369@linux.dev \
    --to=vadim.fedorenko@linux.dev \
    --cc=aleksandr.loktionov@intel.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=marcin.szycik@linux.intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=przemyslaw.kitszel@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.