Re: [PATCH v3 3/7] soc: renesas: Add r8a7790 SYSC PM Domain Binding Definitions

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Geert,

Thank you for the patch.

On Wednesday 09 March 2016 20:18:38 Geert Uytterhoeven wrote:
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v3:
>   - New.
> ---
>  include/dt-bindings/power/r8a7790-sysc.h | 31 +++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 include/dt-bindings/power/r8a7790-sysc.h
> 
> diff --git a/include/dt-bindings/power/r8a7790-sysc.h
> b/include/dt-bindings/power/r8a7790-sysc.h new file mode 100644
> index 0000000000000000..8ff5b86c12a46e85
> --- /dev/null
> +++ b/include/dt-bindings/power/r8a7790-sysc.h
> @@ -0,0 +1,31 @@
> +/*
> + * Copyright (C) 2016 Glider bvba
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + */
> +#ifndef __DT_BINDINGS_POWER_R8A7790_SYSC_H__
> +#define __DT_BINDINGS_POWER_R8A7790_SYSC_H__
> +
> +/*
> + * These power domain indices match the numbers of the interrupt bits
> + * representing the power areas in the various Interrupt Registers
> + * (e.g. SYSCISR, Interrupt Status Register)
> + */
> +
> +#define R8A7790_PD_CA15_CPU0		 0
> +#define R8A7790_PD_CA15_CPU1		 1
> +#define R8A7790_PD_CA15_CPU2		 2
> +#define R8A7790_PD_CA15_CPU3		 3
> +#define R8A7790_PD_CA7_CPU0		 5
> +#define R8A7790_PD_CA7_CPU1		 6
> +#define R8A7790_PD_CA7_CPU2		 7
> +#define R8A7790_PD_CA7_CPU3		 8
> +#define R8A7790_PD_CA15_SCU		12
> +#define R8A7790_PD_SH			16

The power domain is called SH-4A in the datasheet, how about naming it 
R8A7790_PD_SH_4A ?

Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +#define R8A7790_PD_RGX			20
> +#define R8A7790_PD_CA7_SCU		21
> +#define R8A7790_PD_IMP			24
> +
> +#endif /* __DT_BINDINGS_POWER_R8A7790_SYSC_H__ */

-- 
Regards,

Laurent Pinchart