Re: [PATCH 7/9] dt-bindings: spi: mtk-snfi: add two timing delay property

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 28/11/2022 03:06, Xiangsheng Hou wrote:
> add rx-sample-delay and rx-latch-latency property.

Start sentences with capital letter.

Here and in commit subject: property->properties

> 
> Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
> ---
>  .../bindings/spi/mediatek,spi-mtk-snfi.yaml      | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
> index ee20075cd0e7..367862688e92 100644
> --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
> +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml
> @@ -55,6 +55,22 @@ properties:
>      description: device-tree node of the accompanying ECC engine.
>      $ref: /schemas/types.yaml#/definitions/phandle
>  
> +  rx-sample-delay:

No, use existing property, don't invent your own stuff - missing unit
suffix. See spi-peripheral-props.yaml.

> +    description: Rx delay to sample data with this value, the valid
> +                 values are from 0 to 47. The delay is smaller than
> +                 the rx-latch-latency.
> +    $ref: /schemas/types.yaml#/definitions/uint32

Drop $ref.

> +    minItems: 0
> +    maxItems: 47
> +    default: 0
> +
> +  rx-latch-latency:

Same problems. Did you check spi-peripheral-props.yaml or other SPI
controller schemas for such property?

> +    description: Rx delay to sample data with this value, the value
> +                 unit is clock cycle.

I think the unit should be rather time (e.g. us).

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3]
> +    default: 0
> +
>  required:
>    - compatible
>    - reg

Best regards,
Krzysztof