x86_64 Dom0 crash - Kernel BUG at hypervisor:53

x86_64 Dom0 crash - Kernel BUG at hypervisor:53

[David F Barrera]

Dom0 will not boot on x86_64. Here's a more complete log:
--------------
  Booting 'Xen Domain 0 on a FC4 Linux platform'
                                                                                
kernel (hd0,0)/boot/xen.gz dom0_mem=256000 com2=19200,8n1
console=vga,com2 nore
boot
   [Multiboot-elf, <0x100000:0x5c358:0x22ca8>, shtab=0x17f078,
entry=0x100000]
module (hd0,0)/boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0
   [Multiboot-module @ 0x180000, 0x68c6d0 bytes]
module (hd0,0)/boot/initrd-2.6.11.11-xen0
   [Multiboot-module @ 0x80d000, 0x19cc00 bytes]
                                                                                
 __  __            _____  ___         _                _
 \ \/ /___ _ __   |___ / / _ \     __| | _____   _____| |
  \  // _ \ '_ \    |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
  /  \  __/ | | |  ___) | |_| |__| (_| |  __/\ V /  __/ |
 /_/\_\___|_| |_| |____(_)___/    \__,_|\___| \_/ \___|_|
                                                                                
 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory
                                                                                
 Xen version 3.0-devel (root@ltc.austin.ibm.com) (gcc version 4.0.0
20050405 (Red Hat 4.0.0-0.40)) Fri Jun  3 09:18:15 CDT 2005
 Latest ChangeSet: information unavailable
                                                                                
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009d400 (usable)
(XEN)  000000000009d400 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000003ffbe680 (usable)
(XEN)  000000003ffbe680 - 000000003ffd0000 (ACPI data)
(XEN)  000000003ffd0000 - 0000000040000000 (reserved)
(XEN)  00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1023MB (1047916kB)
(XEN) Xen heap: 14MB (14820kB)
(XEN) found SMP MP-table at 0009d540
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 IBM                                   ) @
0x00000000000fdfc0
(XEN) ACPI: RSDT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
0x000000003ffcff80
(XEN) ACPI: FADT (v002 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
0x000000003ffcfec™\x01á™™™‘
                (XEN) ACPI: DSDT (v001 IBM    SERBLADE 0x00001000 INTL
0x02002025) @ 0x0000000000000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:4 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
apic_id 11, version 32, address 0xfec81400, GSI 72-95
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ11 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 4 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 3600.308 MHz processor.
(XEN) Using scheduler: Bo1\x11…¡•-XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
(XEN) Booting processor 2/6 eip 90000
(XEN) Initializing CPU#2
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache: 1024K
(XEN) CPU: Physical Processor ID: 3
(XEN) CPU2: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
(XEN) Booting processor 3/7 eip 90000
(XEN) Initializing CPU#3
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
(XEN) CPU: L2 cache(XEN) Time init:
(XEN) .... cpu_freq:    00000000:D6985928
(XEN) .... scale:       00000001:1C6B89AF
(XEN) .... Wall Clock:  1117792227s 180000us
(XEN) Brought up 4 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found:
'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xffffffff80100000,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000008000000->0000000010000000 (31232 pages to
be allocated)
(XEN) VIRTUAL MEMORY ARRK\x022™™™™™™™™™™™™™™™XEN)  Init. ramdisk:
ffffffff80584000->ffffffff80720c00
(XEN)  Phys-Mach map: ffffffff80721000->ffffffff8075f800
(XEN)  Page tables:   ffffffff80760000->ffffffff80767000
(XEN)  Start info:    ffffffff80767000->ffffffff80768000
(XEN)  Boot stack:    ffffffff80768000->ffffffff80769000
(XEN)  TOTAL:         ffffffff80000000->ffffffff80800000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Initrd len 0x19cc00, start at 0xffffffff80584000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
Linux version 2.6.11.11-xen0 (root@bl2-10.ltc.austin.ibm.com) (gcc
version 4.0.0 20050405 (Red Hat 4.0.0-0.40)) #1 Fri Jun 3 09:24:34 CDT
2005
kernel direct mapping tables upto ffff88000fa00000 @ 800000-87f000
Registering memory for bootmem: from  a00000, size = f000000
No mptable found.
arch/xen/x86_64/mm/init.c:336: bad pte
ffff88000136eec8(0000055555555067).
arch/xen/x86_64/mm/init.c:336: bad
pt…ɍ¡á•¹á}µµ¥¹¥Ñ‰…‘ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…‘ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…‘ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…‘ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…‘ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…‘ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…‘ÁÑ•™™™™••¥‘máu…‘‘É•ÍÍmᙕ000] gsi_base[48])á}µµ¥¹¥Ñ‰…‘]–––‚‚‚Šš²*•
IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Built ­É•Í•ÉÙ•‘­‘…Ñ…­¥¹¥Ñount-cache hash table entries: 256 (order: 0,
4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU:                   Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller
0]Z‹+%™Ñ¡¥Í…ÕÍ•Í…‘•Ù¥•Ñ½ÍѽÁݽɭ¥¹¥Ñ¥ÍÁɽ‰…‰±å‰•…ÕÍ•Ñ¡•‘É¥Ù•É™…¥±•‘ѽ…±±Á¥}•¹…‰±•}‘•Ù¥•Í…Ñ•µÁ½É…Éåݽɭ…ɽչ‘Ñ¡•Á¥É½ÕÑ•¥ÉŅɝյ•¹ÑÉ•ÍѽɕÍÑ¡•½±‘‰•¡…Ù¥½É%™Ñ¡¥Í…ɝյ•¹Ñµ…­•ÍÑ¡•‘•Ù¥•Ý½É­……¥¹Á±•…ÍÉåÁѽÉ…Á¡¥A%8042.c: Can't read CTR while initializing i8042.
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.4)
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
tg3.c:v3.23 (February 15, 2005)
ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at hypervisor:53
invalid operand: 0000 [1]
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.11.11-xen0
RIP: e030:[<ffffffff80118911>]
<ffffffff80118911>{xen_l1_entry_update+113}
RSP: e02b:ffff880000a05c08  EFLAGS: 00010282
RAX: 00000000ffffffea RBX: ffff800000000000 RCX: ffffffff8011890d
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880000a05c08
RBP: 0000000000000000 R08: 0000000000007ff0 R09: ffff880000a05c78
R10: 0000000000007ff0 R11: 0000000000000202 R12: 0000000000000001
R13: ffff88000f9e4000 R14: ffff88000f9e4000 R15: 0000000000000400
FS:  0000000000000000(0000) GS:ffffffff804e3980(0000)
knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000
Process swapper (pid: 1, threadinfo ffff880000a04000, task
ffff880000a11440)
Stack: 000000000887ef20 800000003ffba067 ffff880000a05c58
ffffffff80113d84
       ffff880000a05c78 000000000f9e4000 ffff88008f9e4000
000000000f9e4000
       ffff88008f9e4000 ffff880000a05cc0
Call Trace:<ffffffff80113d84>{dma_alloc_coherent+1028}
<ffffffff80535365>{tg3_test_dma+53}
       <ffffffff80536ec0>{tg3_init_one+6400}
<ffffffff80109eb6>{evtchn_do_upcall+118}
       <ffffffff8020eaaf>{pci_device_probe+95}
<ffffffff8024760d>{driver_probe_device+77}
       <ffffffff80247686>{driver_attach+70}
<ffffffff8024775e>{bus_add_driver+142}
       <f
-- 

David F Barrera
IBM Linux Technology Center
dfbp@us.ibm.com

Re: x86_64 Dom0 crash - Kernel BUG at hypervisor:53

[Jerone Young]

[-- Attachment #1: Type: text/plain, Size: 9615 bytes --]

What happens when you add "acpi=off" as an argument for the Xen kernel.

On 6/4/05, David F Barrera <dfbp@us.ibm.com> wrote:
> Dom0 will not boot on x86_64. Here's a more complete log:
> --------------
>   Booting 'Xen Domain 0 on a FC4 Linux platform'
> 
> kernel (hd0,0)/boot/xen.gz dom0_mem=256000 com2=19200,8n1
> console=vga,com2 nore
> boot
>    [Multiboot-elf, <0x100000:0x5c358:0x22ca8>, shtab=0x17f078,
> entry=0x100000]
> module (hd0,0)/boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0
>    [Multiboot-module @ 0x180000, 0x68c6d0 bytes]
> module (hd0,0)/boot/initrd-2.6.11.11-xen0
>    [Multiboot-module @ 0x80d000, 0x19cc00 bytes]
> 
>  __  __            _____  ___         _                _
>  \ \/ /___ _ __   |___ / / _ \     __| | _____   _____| |
>   \  // _ \ '_ \    |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
>   /  \  __/ | | |  ___) | |_| |__| (_| |  __/\ V /  __/ |
>  /_/\_\___|_| |_| |____(_)___/    \__,_|\___| \_/ \___|_|
> 
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
> 
>  Xen version 3.0-devel (root@ltc.austin.ibm.com) (gcc version 4.0.0
> 20050405 (Red Hat 4.0.0-0.40)) Fri Jun  3 09:18:15 CDT 2005
>  Latest ChangeSet: information unavailable
> 
> (XEN) Physical RAM map:
> (XEN)  0000000000000000 - 000000000009d400 (usable)
> (XEN)  000000000009d400 - 00000000000a0000 (reserved)
> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 000000003ffbe680 (usable)
> (XEN)  000000003ffbe680 - 000000003ffd0000 (ACPI data)
> (XEN)  000000003ffd0000 - 0000000040000000 (reserved)
> (XEN)  00000000fec00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 1023MB (1047916kB)
> (XEN) Xen heap: 14MB (14820kB)
> (XEN) found SMP MP-table at 0009d540
> (XEN) DMI 2.3 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: RSDP (v000 IBM                                   ) @
> 0x00000000000fdfc0
> (XEN) ACPI: RSDT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
> 0x000000003ffcff80
> (XEN) ACPI: FADT (v002 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
> 0x000000003ffcfec™\x01á™™™'
>                 (XEN) ACPI: DSDT (v001 IBM    SERBLADE 0x00001000 INTL
> 0x02002025) @ 0x0000000000000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
> (XEN) Processor #6 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
> apic_id 11, version 32, address 0xfec81400, GSI 72-95
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ11 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 4 I/O APICs
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Initializing CPU#0
> (XEN) Detected 3600.308 MHz processor.
> (XEN) Using scheduler: Bo1\x11…¡•-XEN) CPU: L2 cache: 1024K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> (XEN) Booting processor 2/6 eip 90000
> (XEN) Initializing CPU#2
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
> (XEN) CPU: L2 cache: 1024K
> (XEN) CPU: Physical Processor ID: 3
> (XEN) CPU2: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> (XEN) Booting processor 3/7 eip 90000
> (XEN) Initializing CPU#3
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
> (XEN) CPU: L2 cache(XEN) Time init:
> (XEN) .... cpu_freq:    00000000:D6985928
> (XEN) .... scale:       00000001:1C6B89AF
> (XEN) .... Wall Clock:  1117792227s 180000us
> (XEN) Brought up 4 CPUs
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
> 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xffffffff80100000,LOADER=generic'
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   0000000008000000->0000000010000000 (31232 pages to
> be allocated)
> (XEN) VIRTUAL MEMORY ARRK\x022™™™™™™™™™™™™™™™XEN)  Init. ramdisk:
> ffffffff80584000->ffffffff80720c00
> (XEN)  Phys-Mach map: ffffffff80721000->ffffffff8075f800
> (XEN)  Page tables:   ffffffff80760000->ffffffff80767000
> (XEN)  Start info:    ffffffff80767000->ffffffff80768000
> (XEN)  Boot stack:    ffffffff80768000->ffffffff80769000
> (XEN)  TOTAL:         ffffffff80000000->ffffffff80800000
> (XEN)  ENTRY ADDRESS: ffffffff80100000
> (XEN) Initrd len 0x19cc00, start at 0xffffffff80584000
> (XEN) Scrubbing Free RAM: ...........done.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xen).
> Linux version 2.6.11.11-xen0 (root@bl2-10.ltc.austin.ibm.com) (gcc
> version 4.0.0 20050405 (Red Hat 4.0.0-0.40)) #1 Fri Jun 3 09:24:34 CDT
> 2005
> kernel direct mapping tables upto ffff88000fa00000 @ 800000-87f000
> Registering memory for bootmem: from  a00000, size = f000000
> No mptable found.
> arch/xen/x86_64/mm/init.c:336: bad pte
> ffff88000136eec8(0000055555555067).
> arch/xen/x86_64/mm/init.c:336: bad
> pt…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••¥'máu…''É•ÍÍmᙕ000] gsi_base[48])á}µµ¥¹¥Ñ‰…']–––‚‚‚Šš²*•
> IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71
> ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
> IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Built ­É•Í•ÉÙ•'­'…Ñ…­¥¹¥Ñount-cache hash table entries: 256 (order: 0,
> 4096 bytes)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU:                   Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> NET: Registered protocol family 16
> PCI: Using configuration type 1
> ACPI: Subsystem revision 20050211
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller
> 0]Z‹+%™Ñ¡¥Í…ÕÍ•Í…'•Ù¥•Ñ½ÍѽÁݽɭ¥¹¥Ñ¥ÍÁɽ‰…‰±å‰•…ÕÍ•Ñ¡•'É¥Ù•É™…¥±•'ѽ…±±Á¥}•¹…‰±•}'•Ù¥•Í…Ñ•µÁ½É…Éåݽɭ…ɽչ'Ñ¡•Á¥É½ÕÑ•¥ÉŅɝյ•¹ÑÉ•ÍѽɕÍÑ¡•½±'‰•¡…Ù¥½É%™Ñ¡¥Í…ɝյ•¹Ñµ…­•ÍÑ¡•'•Ù¥•Ý½É­……¥¹Á±•…ÍÉåÁѽÉ…Á¡¥A%8042.c: Can't read CTR while initializing i8042.
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> Floppy drive(s): fd0 is 1.44M
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> loop: loaded (max 8 devices)
> HP CISS Driver (v 2.6.4)
> Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> Copyright (c) 1999-2004 Intel Corporation.
> pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
> e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
> e100: Copyright(c) 1999-2004 Intel Corporation
> tg3.c:v3.23 (February 15, 2005)
> ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
> ----------- [cut here ] --------- [please bite here ] ---------
> Kernel BUG at hypervisor:53
> invalid operand: 0000 [1]
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.11.11-xen0
> RIP: e030:[<ffffffff80118911>]
> <ffffffff80118911>{xen_l1_entry_update+113}
> RSP: e02b:ffff880000a05c08  EFLAGS: 00010282
> RAX: 00000000ffffffea RBX: ffff800000000000 RCX: ffffffff8011890d
> RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880000a05c08
> RBP: 0000000000000000 R08: 0000000000007ff0 R09: ffff880000a05c78
> R10: 0000000000007ff0 R11: 0000000000000202 R12: 0000000000000001
> R13: ffff88000f9e4000 R14: ffff88000f9e4000 R15: 0000000000000400
> FS:  0000000000000000(0000) GS:ffffffff804e3980(0000)
> knlGS:0000000000000000
> CS:  e033 DS: 0000 ES: 0000
> Process swapper (pid: 1, threadinfo ffff880000a04000, task
> ffff880000a11440)
> Stack: 000000000887ef20 800000003ffba067 ffff880000a05c58
> ffffffff80113d84
>        ffff880000a05c78 000000000f9e4000 ffff88008f9e4000
> 000000000f9e4000
>        ffff88008f9e4000 ffff880000a05cc0
> Call Trace:<ffffffff80113d84>{dma_alloc_coherent+1028}
> <ffffffff80535365>{tg3_test_dma+53}
>        <ffffffff80536ec0>{tg3_init_one+6400}
> <ffffffff80109eb6>{evtchn_do_upcall+118}
>        <ffffffff8020eaaf>{pci_device_probe+95}
> <ffffffff8024760d>{driver_probe_device+77}
>        <ffffffff80247686>{driver_attach+70}
> <ffffffff8024775e>{bus_add_driver+142}
>        <f
> --
> 
> David F Barrera
> IBM Linux Technology Center
> dfbp@us.ibm.com
> 
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: x86_64 Dom0 crash - Kernel BUG at hypervisor:53

[David F Barrera]

On Fri, 2005-06-03 at 08:27, Jerone Young wrote:
> What happens when you add "acpi=off" as an argument for the Xen kernel.

I get the same error. It does not make any difference.

> 
> On 6/4/05, David F Barrera <dfbp@us.ibm.com> wrote:
> > Dom0 will not boot on x86_64. Here's a more complete log:
> > --------------
> >   Booting 'Xen Domain 0 on a FC4 Linux platform'
> > 
> > kernel (hd0,0)/boot/xen.gz dom0_mem=256000 com2=19200,8n1
> > console=vga,com2 nore
> > boot
> >    [Multiboot-elf, <0x100000:0x5c358:0x22ca8>, shtab=0x17f078,
> > entry=0x100000]
> > module (hd0,0)/boot/vmlinuz-2.6-xen0 root=/dev/sda1 ro console=tty0
> >    [Multiboot-module @ 0x180000, 0x68c6d0 bytes]
> > module (hd0,0)/boot/initrd-2.6.11.11-xen0
> >    [Multiboot-module @ 0x80d000, 0x19cc00 bytes]
> > 
> >  __  __            _____  ___         _                _
> >  \ \/ /___ _ __   |___ / / _ \     __| | _____   _____| |
> >   \  // _ \ '_ \    |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
> >   /  \  __/ | | |  ___) | |_| |__| (_| |  __/\ V /  __/ |
> >  /_/\_\___|_| |_| |____(_)___/    \__,_|\___| \_/ \___|_|
> > 
> >  http://www.cl.cam.ac.uk/netos/xen
> >  University of Cambridge Computer Laboratory
> > 
> >  Xen version 3.0-devel (root@ltc.austin.ibm.com) (gcc version 4.0.0
> > 20050405 (Red Hat 4.0.0-0.40)) Fri Jun  3 09:18:15 CDT 2005
> >  Latest ChangeSet: information unavailable
> > 
> > (XEN) Physical RAM map:
> > (XEN)  0000000000000000 - 000000000009d400 (usable)
> > (XEN)  000000000009d400 - 00000000000a0000 (reserved)
> > (XEN)  00000000000e0000 - 0000000000100000 (reserved)
> > (XEN)  0000000000100000 - 000000003ffbe680 (usable)
> > (XEN)  000000003ffbe680 - 000000003ffd0000 (ACPI data)
> > (XEN)  000000003ffd0000 - 0000000040000000 (reserved)
> > (XEN)  00000000fec00000 - 0000000100000000 (reserved)
> > (XEN) System RAM: 1023MB (1047916kB)
> > (XEN) Xen heap: 14MB (14820kB)
> > (XEN) found SMP MP-table at 0009d540
> > (XEN) DMI 2.3 present.
> > (XEN) Using APIC driver default
> > (XEN) ACPI: RSDP (v000 IBM                                   ) @
> > 0x00000000000fdfc0
> > (XEN) ACPI: RSDT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
> > 0x000000003ffcff80
> > (XEN) ACPI: FADT (v002 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @
> > 0x000000003ffcfec™\x01á™™™'
> >                 (XEN) ACPI: DSDT (v001 IBM    SERBLADE 0x00001000 INTL
> > 0x02002025) @ 0x0000000000000000
> > (XEN) ACPI: Local APIC address 0xfee00000
> > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > (XEN) Processor #0 15:4 APIC version 20
> > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
> > (XEN) Processor #6 15:4 APIC version 20
> > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> > (XEN) Processor #1 15:4 APIC version 20
> > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
> > apic_id 11, version 32, address 0xfec81400, GSI 72-95
> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> > (XEN) ACPI: IRQ0 used by override.
> > (XEN) ACPI: IRQ2 used by override.
> > (XEN) ACPI: IRQ11 used by override.
> > (XEN) Enabling APIC mode:  Flat.  Using 4 I/O APICs
> > (XEN) Using ACPI (MADT) for SMP configuration information
> > (XEN) Initializing CPU#0
> > (XEN) Detected 3600.308 MHz processor.
> > (XEN) Using scheduler: Bo1\x11…¡•-XEN) CPU: L2 cache: 1024K
> > (XEN) CPU: Physical Processor ID: 0
> > (XEN) CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> > (XEN) Booting processor 2/6 eip 90000
> > (XEN) Initializing CPU#2
> > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
> > (XEN) CPU: L2 cache: 1024K
> > (XEN) CPU: Physical Processor ID: 3
> > (XEN) CPU2: Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> > (XEN) Booting processor 3/7 eip 90000
> > (XEN) Initializing CPU#3
> > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
> > (XEN) CPU: L2 cache(XEN) Time init:
> > (XEN) .... cpu_freq:    00000000:D6985928
> > (XEN) .... scale:       00000001:1C6B89AF
> > (XEN) .... Wall Clock:  1117792227s 180000us
> > (XEN) Brought up 4 CPUs
> > (XEN) mtrr: v2.0 (20020519)
> > (XEN) *** LOADING DOMAIN 0 ***
> > (XEN) Xen-ELF header found:
> > 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xffffffff80100000,LOADER=generic'
> > (XEN) PHYSICAL MEMORY ARRANGEMENT:
> > (XEN)  Dom0 alloc.:   0000000008000000->0000000010000000 (31232 pages to
> > be allocated)
> > (XEN) VIRTUAL MEMORY ARRK\x022™™™™™™™™™™™™™™™XEN)  Init. ramdisk:
> > ffffffff80584000->ffffffff80720c00
> > (XEN)  Phys-Mach map: ffffffff80721000->ffffffff8075f800
> > (XEN)  Page tables:   ffffffff80760000->ffffffff80767000
> > (XEN)  Start info:    ffffffff80767000->ffffffff80768000
> > (XEN)  Boot stack:    ffffffff80768000->ffffffff80769000
> > (XEN)  TOTAL:         ffffffff80000000->ffffffff80800000
> > (XEN)  ENTRY ADDRESS: ffffffff80100000
> > (XEN) Initrd len 0x19cc00, start at 0xffffffff80584000
> > (XEN) Scrubbing Free RAM: ...........done.
> > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> > input to Xen).
> > Linux version 2.6.11.11-xen0 (root@bl2-10.ltc.austin.ibm.com) (gcc
> > version 4.0.0 20050405 (Red Hat 4.0.0-0.40)) #1 Fri Jun 3 09:24:34 CDT
> > 2005
> > kernel direct mapping tables upto ffff88000fa00000 @ 800000-87f000
> > Registering memory for bootmem: from  a00000, size = f000000
> > No mptable found.
> > arch/xen/x86_64/mm/init.c:336: bad pte
> > ffff88000136eec8(0000055555555067).
> > arch/xen/x86_64/mm/init.c:336: bad
> > pt…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••…ɍ¡á•¹á}µµ¥¹¥Ñ‰…'ÁÑ•™™™™••¥'máu…''É•ÍÍmᙕ000] gsi_base[48])á}µµ¥¹¥Ñ‰…']–––‚‚‚Šš²*•
> > IOAPIC[2]: apic_id 12, version 32, address 0xfec81000, GSI 48-71
> > ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
> > IOAPIC[3]: apic_id 11, version 32, address 0xfec81400, GSI 72-95
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
> > Setting APIC routing to flat
> > Using ACPI (MADT) for SMP configuration information
> > Built ­É•Í•ÉÙ•'­'…Ñ…­¥¹¥Ñount-cache hash table entries: 256 (order: 0,
> > 4096 bytes)
> > CPU: Trace cache: 12K uops, L1 D cache: 16K
> > CPU: L2 cache: 1024K
> > CPU:                   Intel(R) Xeon(TM) CPU 3.60GHz stepping 01
> > NET: Registered protocol family 16
> > PCI: Using configuration type 1
> > ACPI: Subsystem revision 20050211
> > ACPI: Interpreter enabled
> > ACPI: Using IOAPIC for interrupt routing
> > ACPI: PCI Root Bridge [PCI0] (00:00)
> > PCI: Probing PCI hardware (bus 00)
> > PCI: Ignoring BAR0-3 of IDE controller
> > 0]Z‹+%™Ñ¡¥Í…ÕÍ•Í…'•Ù¥•Ñ½ÍѽÁݽɭ¥¹¥Ñ¥ÍÁɽ‰…‰±å‰•…ÕÍ•Ñ¡•'É¥Ù•É™…¥±•'ѽ…±±Á¥}•¹…‰±•}'•Ù¥•Í…Ñ•µÁ½É…Éåݽɭ…ɽչ'Ñ¡•Á¥É½ÕÑ•¥ÉŅɝյ•¹ÑÉ•ÍѽɕÍÑ¡•½±'‰•¡…Ù¥½É%™Ñ¡¥Í…ɝյ•¹Ñµ…­•ÍÑ¡•'•Ù¥•Ý½É­……¥¹Á±•…ÍÉåÁѽÉ…Á¡¥A%8042.c: Can't read CTR while initializing i8042.
> > io scheduler noop registered
> > io scheduler anticipatory registered
> > io scheduler deadline registered
> > io scheduler cfq registered
> > Floppy drive(s): fd0 is 1.44M
> > floppy0: no floppy controllers found
> > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> > loop: loaded (max 8 devices)
> > HP CISS Driver (v 2.6.4)
> > Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
> > Copyright (c) 1999-2004 Intel Corporation.
> > pcnet32.c:v1.30i 06.28.2004 tsbogend@alpha.franken.de
> > e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
> > e100: Copyright(c) 1999-2004 Intel Corporation
> > tg3.c:v3.23 (February 15, 2005)
> > ACPI: PCI interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
> > ----------- [cut here ] --------- [please bite here ] ---------
> > Kernel BUG at hypervisor:53
> > invalid operand: 0000 [1]
> > CPU 0
> > Modules linked in:
> > Pid: 1, comm: swapper Not tainted 2.6.11.11-xen0
> > RIP: e030:[<ffffffff80118911>]
> > <ffffffff80118911>{xen_l1_entry_update+113}
> > RSP: e02b:ffff880000a05c08  EFLAGS: 00010282
> > RAX: 00000000ffffffea RBX: ffff800000000000 RCX: ffffffff8011890d
> > RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880000a05c08
> > RBP: 0000000000000000 R08: 0000000000007ff0 R09: ffff880000a05c78
> > R10: 0000000000007ff0 R11: 0000000000000202 R12: 0000000000000001
> > R13: ffff88000f9e4000 R14: ffff88000f9e4000 R15: 0000000000000400
> > FS:  0000000000000000(0000) GS:ffffffff804e3980(0000)
> > knlGS:0000000000000000
> > CS:  e033 DS: 0000 ES: 0000
> > Process swapper (pid: 1, threadinfo ffff880000a04000, task
> > ffff880000a11440)
> > Stack: 000000000887ef20 800000003ffba067 ffff880000a05c58
> > ffffffff80113d84
> >        ffff880000a05c78 000000000f9e4000 ffff88008f9e4000
> > 000000000f9e4000
> >        ffff88008f9e4000 ffff880000a05cc0
> > Call Trace:<ffffffff80113d84>{dma_alloc_coherent+1028}
> > <ffffffff80535365>{tg3_test_dma+53}
> >        <ffffffff80536ec0>{tg3_init_one+6400}
> > <ffffffff80109eb6>{evtchn_do_upcall+118}
> >        <ffffffff8020eaaf>{pci_device_probe+95}
> > <ffffffff8024760d>{driver_probe_device+77}
> >        <ffffffff80247686>{driver_attach+70}
> > <ffffffff8024775e>{bus_add_driver+142}
> >        <f
> > --
> > 
> > David F Barrera
> > IBM Linux Technology Center
> > dfbp@us.ibm.com
> > 
> > 
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@lists.xensource.com
> > http://lists.xensource.com/xen-devel
> >
-- 

David F Barrera
IBM Linux Technology Center
dfbp@us.ibm.com