Re: [Xenomai-help] Xenomai kernel compile issue

[Sam Ferguson <samf48@domain.hid>]

No, I get the same error as before. Am I using the right patch?  I have an
HP laptop with an AMD chipset in it, should I be using i386 or x86.  I've
tried both now with the same problem as before.  I start the script, then
after 2 seconds it returns me to the terminal.  I am now using xenomai-2.4.5
and linux-2.6.26.3 with no luck.  Is there a log file generated from the
prepare-kernel.sh script I can look at?


On 9/3/08 11:33 PM, "Gilles Chanteperdrix"
<gilles.chanteperdrix@xenomai.org> wrote:

> Sam Ferguson wrote:
>> Ok, so I updated my kernel and tried again, the script doesn't error out but
>> it also doesn't say that it finished. Here's what happens:
>> igvc@domain.hid$ sudo scripts/prepare-kernel.sh
>> Linux tree [default /lib/modules/2.6.24-19-generic/source]:
>> /usr/src/linux-2.6.26.3
>> Target architecture [default i686]:
>> Adeos patch [default
>> /usr/src/xenomai-2.4.4/ksrc/arch/x86/patches/adeos-ipipe-2.6.26-x86-2.0-09.p
>> atch]: 
> 
> There was two suggestions in my post:
> - please use the proper patch for the kernel version you are using,
> which you have followed;
> - please use the latest revision in the 2.4.x branch, that is xenomai
> 2.4.5, which you have not followed;
> 
> But the important question is: does it compile now ?