Xen 3.4 fails to shutdown on a Dell E6400 machine

Xen 3.4 fails to shutdown on a Dell E6400 machine

[Tom Rotenberg]

[-- Attachment #1.1: Type: text/plain, Size: 1468 bytes --]

Hi,

I am using a Dell E6400 machine with Xen 3.4 version, and the Xen hypervisor
fails to shutdown the machine.

Here are my test results:
1. When booting with a regular Linux (without Xen), then running the
command: 'shutdown -hP now' causes the machine to be shut-down.
2. When using Xen 3.4, and running the command: 'shutdown -hP now', the
machine looks like it was shutdown, but it's still on. It looks, like the
Xen's code, didn't shut it down "completely".
The last log lines of Xen are:
[   60.511271] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   60.748492] sd 0:0:0:0: [sda] Stopping disk
[   61.546728] ACPI: PCI interrupt for device 0000:00:19.0 disabled
[   61.562170] hub 2-0:1.0: hub_port_status failed (err = -110)
[   61.562263] hub 2-0:1.0: hub_port_status failed (err = -110)
[   61.567306] Disabling non-boot CPUs ...
[   61.341223] Broke affinity for irq 259
[   61.341312] Broke affinity for irq 260
[   61.341394] Broke affinity for irq 261
[   61.678156] SMP alternatives: switching to UP code
[   61.679481] CPU1 is down
[   61.679559] Power down.
[   61.679636] acpi_power_off called
(XEN) Preparing system for ACPI S5 state.Freezing cpus ...
(XEN) Prepare to bring CPU1 down...
(XEN) Cannot set affinity for vector 224 (irq 0)
(XEN) CPU 1 is now offline
(XEN) CPU1 is down
(XEN) Entering ACPI S5 state.

It looks like the hypervisor said he was enetring "ACPI S5 state", but
didn't do it.

Can someone please help me with this issue?

Tom

[-- Attachment #1.2: Type: text/html, Size: 1676 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

Re: Xen 3.4 fails to shutdown on a Dell E6400 machine

[Keir Fraser]

On 01/07/2009 12:13, "Tom Rotenberg" <tom.rotenberg@gmail.com> wrote:

> It looks like the hypervisor said he was enetring "ACPI S5 state", but didn't
> do it.
> 
> Can someone please help me with this issue?

Does reboot work for you, out of interest?

 -- Keir

Re: Xen 3.4 fails to shutdown on a Dell E6400 machine

[Tom Rotenberg]

[-- Attachment #1.1: Type: text/plain, Size: 413 bytes --]

[Forgot to send it to all the mailing list]

No, reboot doesn't work also.

2009/7/1 Keir Fraser <keir.fraser@eu.citrix.com>

> On 01/07/2009 12:13, "Tom Rotenberg" <tom.rotenberg@gmail.com> wrote:
>
> > It looks like the hypervisor said he was enetring "ACPI S5 state", but
> didn't
> > do it.
> >
> > Can someone please help me with this issue?
>
> Does reboot work for you, out of interest?
>
>  -- Keir
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 882 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel