* OpenBMC add sensor in IPMI interface
@ 2021-01-05 14:05 Stanley Liu
2021-01-12 7:08 ` Andrei Kartashev
0 siblings, 1 reply; 4+ messages in thread
From: Stanley Liu @ 2021-01-05 14:05 UTC (permalink / raw)
To: openbmc@lists.ozlabs.org
[-- Attachment #1.1: Type: text/plain, Size: 315 bytes --]
Greeting,
Could you share any document or specification for add a sensor and can show up from ipmitool, please?
I tried to add serval sensors with ISL68137 but fail.
--
Stanley Liu
BMC Technical Manager
+886.(2)77455671
[cid:image005.jpg@01CC9FA7.483A8010]
www.phoenix.com<http://www.phoenix.com/>
[-- Attachment #1.2: Type: text/html, Size: 3731 bytes --]
[-- Attachment #2: image001.jpg --]
[-- Type: image/jpeg, Size: 2458 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: OpenBMC add sensor in IPMI interface
2021-01-05 14:05 OpenBMC add sensor in IPMI interface Stanley Liu
@ 2021-01-12 7:08 ` Andrei Kartashev
2021-01-12 14:53 ` Mike Jones
0 siblings, 1 reply; 4+ messages in thread
From: Andrei Kartashev @ 2021-01-12 7:08 UTC (permalink / raw)
To: openbmc
This is highly depend on which packets do you use to manage sensors and
IPMI.
E.g. for EntityManager + dbus-sensors + intel-ipmi-oem you likely need
to ensure dbus-sensors know how to work with ISL68137 and enable it EM
configuration.
On Tue, 2021-01-05 at 14:05 +0000, Stanley Liu wrote:
> Greeting,
> Could you share any document or specification for add a sensor and
> can show up from ipmitool, please?
> I tried to add serval sensors with ISL68137 but fail.
>
> --
> Stanley Liu
> BMC Technical Manager
> +886.(2)77455671
>
>
>
> www.phoenix.com
>
--
Best regards,
Andrei Kartashev
^ permalink raw reply [flat|nested] 4+ messages in thread
* OpenBMC add sensor in IPMI interface
@ 2021-01-06 3:36 Stanley Liu
0 siblings, 0 replies; 4+ messages in thread
From: Stanley Liu @ 2021-01-06 3:36 UTC (permalink / raw)
To: openbmc@lists.ozlabs.org
[-- Attachment #1.1: Type: text/plain, Size: 315 bytes --]
Greeting,
Could you share any document or specification for add a sensor and can show up from ipmitool, please?
I tried to add serval sensors with ISL68137 but fail.
--
Stanley Liu
BMC Technical Manager
+886.(2)77455671
[cid:image005.jpg@01CC9FA7.483A8010]
www.phoenix.com<http://www.phoenix.com/>
[-- Attachment #1.2: Type: text/html, Size: 3731 bytes --]
[-- Attachment #2: image001.jpg --]
[-- Type: image/jpeg, Size: 2458 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-01-12 14:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-01-05 14:05 OpenBMC add sensor in IPMI interface Stanley Liu
2021-01-12 7:08 ` Andrei Kartashev
2021-01-12 14:53 ` Mike Jones
-- strict thread matches above, loose matches on Subject: below --
2021-01-06 3:36 Stanley Liu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.