All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] spl: remove usage of CMD_BOOT[IZ] from image parsing
@ 2025-03-12  9:42 Anshul Dalal
  2025-03-12 12:53 ` Anshul Dalal
  0 siblings, 1 reply; 2+ messages in thread
From: Anshul Dalal @ 2025-03-12  9:42 UTC (permalink / raw)
  To: u-boot; +Cc: Anshul Dalal, vigneshr, trini

Using CMD_* configs from spl doesn't make logical sense. Therefore this
patch replaces the checks for CMD_BOOT[IZ] with newly added configs
SPL_HAS_BOOT[IZ].

More info:
https://lore.kernel.org/u-boot/20250310135544.GV2640854@bill-the-cat/

Signed-off-by: Anshul Dalal <anshuld@ti.com>
---
Changes in v2:
 * Add SPL_HAS_BOOT[IZ] configs
v1: https://lore.kernel.org/u-boot/20250311093709.3372104-1-anshuld@ti.com/
---
 arch/arm/lib/Makefile |  4 ++--
 common/spl/Kconfig    | 13 +++++++++++++
 common/spl/spl.c      |  6 +++---
 3 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 1c95dd6fed2..e857adddd03 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -36,8 +36,8 @@ obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o
 else
 obj-$(CONFIG_$(PHASE_)FRAMEWORK) += spl.o
 ifdef CONFIG_SPL_FRAMEWORK
-obj-$(CONFIG_CMD_BOOTI) += image.o
-obj-$(CONFIG_CMD_BOOTZ) += zimage.o
+obj-$(CONFIG_SPL_HAS_BOOTI) += image.o
+obj-$(CONFIG_SPL_HAS_BOOTZ) += zimage.o
 endif
 obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
 endif
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 21a5cefee7a..36c0fb063d0 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1153,6 +1153,19 @@ config SPL_OS_BOOT
 	  Enable booting directly to an OS from SPL.
 	  for more info read doc/README.falcon
 
+config SPL_HAS_BOOTZ
+	bool "Allow booting to kernel zimage from SPL"
+	depends on SPL_OS_BOOT
+	help
+	  Boot a linux zimage from memory in falcon boot.
+
+config SPL_HAS_BOOTI
+	bool "Allow booting to kernel image from SPL"
+	depends on SPL_OS_BOOT
+	default y if ARM64 || RISCV || SANDBOX
+	help
+	  Boot an AArch64 Linux Kernel image from memory in falcon boot.
+
 config SPL_PAYLOAD_ARGS_ADDR
 	hex "Address in memory to load 'args' file for Falcon Mode to"
 	depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 76fd56dfe4b..8905c776ea5 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -335,7 +335,7 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
 		panic("** no mkimage signature but raw image not supported");
 	}
 
-	if (CONFIG_IS_ENABLED(OS_BOOT) && IS_ENABLED(CONFIG_CMD_BOOTI)) {
+	if (CONFIG_IS_ENABLED(OS_BOOT) && IS_ENABLED(CONFIG_SPL_HAS_BOOTI)) {
 		ulong start, size;
 
 		if (!booti_setup((ulong)header, &start, &size, 0)) {
@@ -349,9 +349,9 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
 			      spl_image->load_addr, spl_image->size);
 			return 0;
 		}
-	} else if (CONFIG_IS_ENABLED(OS_BOOT) && IS_ENABLED(CONFIG_CMD_BOOTZ)) {
+	} else if (CONFIG_IS_ENABLED(OS_BOOT) &&
+		   IS_ENABLED(CONFIG_SPL_HAS_BOOTI)) {
 		ulong start, end;
-
 		if (!bootz_setup((ulong)header, &start, &end)) {
 			spl_image->name = "Linux";
 			spl_image->os = IH_OS_LINUX;
-- 
2.43.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [PATCH v2] spl: remove usage of CMD_BOOT[IZ] from image parsing
  2025-03-12  9:42 [PATCH v2] spl: remove usage of CMD_BOOT[IZ] from image parsing Anshul Dalal
@ 2025-03-12 12:53 ` Anshul Dalal
  0 siblings, 0 replies; 2+ messages in thread
From: Anshul Dalal @ 2025-03-12 12:53 UTC (permalink / raw)
  To: Anshul Dalal, u-boot; +Cc: vigneshr, trini

On Wed Mar 12, 2025 at 3:12 PM IST, Anshul Dalal wrote:
> Using CMD_* configs from spl doesn't make logical sense. Therefore this
> patch replaces the checks for CMD_BOOT[IZ] with newly added configs
> SPL_HAS_BOOT[IZ].
>
> More info:
> https://lore.kernel.org/u-boot/20250310135544.GV2640854@bill-the-cat/
>
> Signed-off-by: Anshul Dalal <anshuld@ti.com>
> ---
> Changes in v2:
>  * Add SPL_HAS_BOOT[IZ] configs
> v1: https://lore.kernel.org/u-boot/20250311093709.3372104-1-anshuld@ti.com/
> ---
>  arch/arm/lib/Makefile |  4 ++--
>  common/spl/Kconfig    | 13 +++++++++++++
>  common/spl/spl.c      |  6 +++---
>  3 files changed, 18 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
> index 1c95dd6fed2..e857adddd03 100644
> --- a/arch/arm/lib/Makefile
> +++ b/arch/arm/lib/Makefile
> @@ -36,8 +36,8 @@ obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o
>  else
>  obj-$(CONFIG_$(PHASE_)FRAMEWORK) += spl.o
>  ifdef CONFIG_SPL_FRAMEWORK
> -obj-$(CONFIG_CMD_BOOTI) += image.o
> -obj-$(CONFIG_CMD_BOOTZ) += zimage.o
> +obj-$(CONFIG_SPL_HAS_BOOTI) += image.o
> +obj-$(CONFIG_SPL_HAS_BOOTZ) += zimage.o
>  endif
>  obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
>  endif
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 21a5cefee7a..36c0fb063d0 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -1153,6 +1153,19 @@ config SPL_OS_BOOT
>  	  Enable booting directly to an OS from SPL.
>  	  for more info read doc/README.falcon
>  
> +config SPL_HAS_BOOTZ
> +	bool "Allow booting to kernel zimage from SPL"
> +	depends on SPL_OS_BOOT
> +	help
> +	  Boot a linux zimage from memory in falcon boot.
> +
> +config SPL_HAS_BOOTI
> +	bool "Allow booting to kernel image from SPL"
> +	depends on SPL_OS_BOOT
> +	default y if ARM64 || RISCV || SANDBOX
> +	help
> +	  Boot an AArch64 Linux Kernel image from memory in falcon boot.
> +
>  config SPL_PAYLOAD_ARGS_ADDR
>  	hex "Address in memory to load 'args' file for Falcon Mode to"
>  	depends on SPL_OS_BOOT || SPL_LOAD_FIT_OPENSBI_OS_BOOT
> diff --git a/common/spl/spl.c b/common/spl/spl.c
> index 76fd56dfe4b..8905c776ea5 100644
> --- a/common/spl/spl.c
> +++ b/common/spl/spl.c
> @@ -335,7 +335,7 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
>  		panic("** no mkimage signature but raw image not supported");
>  	}
>  
> -	if (CONFIG_IS_ENABLED(OS_BOOT) && IS_ENABLED(CONFIG_CMD_BOOTI)) {
> +	if (CONFIG_IS_ENABLED(OS_BOOT) && IS_ENABLED(CONFIG_SPL_HAS_BOOTI)) {
>  		ulong start, size;
>  
>  		if (!booti_setup((ulong)header, &start, &size, 0)) {
> @@ -349,9 +349,9 @@ int spl_parse_image_header(struct spl_image_info *spl_image,
>  			      spl_image->load_addr, spl_image->size);
>  			return 0;
>  		}
> -	} else if (CONFIG_IS_ENABLED(OS_BOOT) && IS_ENABLED(CONFIG_CMD_BOOTZ)) {
> +	} else if (CONFIG_IS_ENABLED(OS_BOOT) &&
> +		   IS_ENABLED(CONFIG_SPL_HAS_BOOTI)) {
>  		ulong start, end;
> -
>  		if (!bootz_setup((ulong)header, &start, &end)) {
>  			spl_image->name = "Linux";
>  			spl_image->os = IH_OS_LINUX;

Superseded by v3:
https://lore.kernel.org/u-boot/20250312124757.789013-1-anshuld@ti.com/

Anshul

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2025-03-12 12:53 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-03-12  9:42 [PATCH v2] spl: remove usage of CMD_BOOT[IZ] from image parsing Anshul Dalal
2025-03-12 12:53 ` Anshul Dalal

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.