[PATCH 0/2] Improve gmac0 DT config for NanoPi R5S

[PATCH 0/2] Improve gmac0 DT config for NanoPi R5S

[Diederik de Haas]

These 2 patches contain a fix for an incorrect pinctlr definition and
replaces several deprecated snps,reset* properties with their
non-deprecated replacements.

Diederik de Haas (2):
  arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S
  arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

-- 
2.53.0

[PATCH 0/2] Improve gmac0 DT config for NanoPi R5S

[Diederik de Haas]

These 2 patches contain a fix for an incorrect pinctlr definition and
replaces several deprecated snps,reset* properties with their
non-deprecated replacements.

Diederik de Haas (2):
  arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S
  arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 1/2] arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S

[Diederik de Haas]

According to the NanoPi R5S 2204 schematic on page 6, GPIO0_C4 is for
GMAC0_INT/PMEB_GPIO0_C4, while GPIO0_C5 is for GMAC0_RSTn_GPIO0_C5.
While the 'reset-gpios' property was set correctly, the corresponding
pinctrl didn't match that.

Next to fixing the pinctrl definition, also change the node name and
phandle to match what is used in the schematic.

Fixes: c6629b9a6738 ("arm64: dts: rockchip: Add FriendlyElec Nanopi R5S")
Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index 718d1a2da8e5..90ce6f0e1dcf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -98,7 +98,7 @@ &mdio0 {
 	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
 		pinctrl-names = "default";
 	};
 };
@@ -132,8 +132,8 @@ &pcie3x2 {
 
 &pinctrl {
 	gmac0 {
-		eth_phy0_reset_pin: eth-phy0-reset-pin {
-			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		gmac0_rstn_gpio0_c5_pin: gmac0-rstn-gpio0-c5-pin {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-- 
2.53.0

[PATCH 1/2] arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S

[Diederik de Haas]

According to the NanoPi R5S 2204 schematic on page 6, GPIO0_C4 is for
GMAC0_INT/PMEB_GPIO0_C4, while GPIO0_C5 is for GMAC0_RSTn_GPIO0_C5.
While the 'reset-gpios' property was set correctly, the corresponding
pinctrl didn't match that.

Next to fixing the pinctrl definition, also change the node name and
phandle to match what is used in the schematic.

Fixes: c6629b9a6738 ("arm64: dts: rockchip: Add FriendlyElec Nanopi R5S")
Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index 718d1a2da8e5..90ce6f0e1dcf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -98,7 +98,7 @@ &mdio0 {
 	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
-		pinctrl-0 = <&eth_phy0_reset_pin>;
+		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
 		pinctrl-names = "default";
 	};
 };
@@ -132,8 +132,8 @@ &pcie3x2 {
 
 &pinctrl {
 	gmac0 {
-		eth_phy0_reset_pin: eth-phy0-reset-pin {
-			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+		gmac0_rstn_gpio0_c5_pin: gmac0-rstn-gpio0-c5-pin {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Diederik de Haas]

The various snps,reset-* properties are deprecated, so convert them into
their replacements.

Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index 90ce6f0e1dcf..92d044ec696b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -85,10 +85,6 @@ &gmac0_tx_bus2
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	/* Reset time is 15ms, 50ms for rtl8211f */
-	snps,reset-delays-us = <0 15000 50000>;
 	tx_delay = <0x3c>;
 	rx_delay = <0x2f>;
 	status = "okay";
@@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
 		reg = <1>;
 		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
 		pinctrl-names = "default";
+		reset-assert-us = <15000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
 	};
 };
 
-- 
2.53.0

[PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Diederik de Haas]

The various snps,reset-* properties are deprecated, so convert them into
their replacements.

Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index 90ce6f0e1dcf..92d044ec696b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -85,10 +85,6 @@ &gmac0_tx_bus2
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	/* Reset time is 15ms, 50ms for rtl8211f */
-	snps,reset-delays-us = <0 15000 50000>;
 	tx_delay = <0x3c>;
 	rx_delay = <0x2f>;
 	status = "okay";
@@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
 		reg = <1>;
 		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
 		pinctrl-names = "default";
+		reset-assert-us = <15000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
 	};
 };
 
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Diederik de Haas]

On Wed Apr 1, 2026 at 3:11 PM CEST, Diederik de Haas wrote:
> The various snps,reset-* properties are deprecated, so convert them into
> their replacements.
>
> Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
> index 90ce6f0e1dcf..92d044ec696b 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
> @@ -85,10 +85,6 @@ &gmac0_tx_bus2
>  		     &gmac0_rx_bus2
>  		     &gmac0_rgmii_clk
>  		     &gmac0_rgmii_bus>;
> -	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
> -	snps,reset-active-low;
> -	/* Reset time is 15ms, 50ms for rtl8211f */
> -	snps,reset-delays-us = <0 15000 50000>;
>  	tx_delay = <0x3c>;
>  	rx_delay = <0x2f>;
>  	status = "okay";
> @@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
>  		reg = <1>;
>  		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
>  		pinctrl-names = "default";
> +		reset-assert-us = <15000>;
> +		reset-deassert-us = <50000>;
> +		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>  	};
>  };
>  

Please disregard/drop this patch.

I was recently made aware of 'sashiko.dev' and checked whether it had
also checked my patch, which it did:
https://sashiko.dev/#/patchset/20260401131551.734456-1-diederik%40cknow-tech.com

And it turns out that the concern raised is valid (thanks Quentin!), so
this patch could introduce a regression.
So it looks like staying with the deprecated properties is actually
better (in this case?).

Cheers,
  Diederik

Re: [PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Diederik de Haas]

On Wed Apr 1, 2026 at 3:11 PM CEST, Diederik de Haas wrote:
> The various snps,reset-* properties are deprecated, so convert them into
> their replacements.
>
> Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
> index 90ce6f0e1dcf..92d044ec696b 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
> @@ -85,10 +85,6 @@ &gmac0_tx_bus2
>  		     &gmac0_rx_bus2
>  		     &gmac0_rgmii_clk
>  		     &gmac0_rgmii_bus>;
> -	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
> -	snps,reset-active-low;
> -	/* Reset time is 15ms, 50ms for rtl8211f */
> -	snps,reset-delays-us = <0 15000 50000>;
>  	tx_delay = <0x3c>;
>  	rx_delay = <0x2f>;
>  	status = "okay";
> @@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
>  		reg = <1>;
>  		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
>  		pinctrl-names = "default";
> +		reset-assert-us = <15000>;
> +		reset-deassert-us = <50000>;
> +		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>  	};
>  };
>  

Please disregard/drop this patch.

I was recently made aware of 'sashiko.dev' and checked whether it had
also checked my patch, which it did:
https://sashiko.dev/#/patchset/20260401131551.734456-1-diederik%40cknow-tech.com

And it turns out that the concern raised is valid (thanks Quentin!), so
this patch could introduce a regression.
So it looks like staying with the deprecated properties is actually
better (in this case?).

Cheers,
  Diederik

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Tianling Shen]

On 2026/4/15 22:23, Diederik de Haas wrote:
> On Wed Apr 1, 2026 at 3:11 PM CEST, Diederik de Haas wrote:
>> The various snps,reset-* properties are deprecated, so convert them into
>> their replacements.
>>
>> Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
>>   1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>> index 90ce6f0e1dcf..92d044ec696b 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>> @@ -85,10 +85,6 @@ &gmac0_tx_bus2
>>   		     &gmac0_rx_bus2
>>   		     &gmac0_rgmii_clk
>>   		     &gmac0_rgmii_bus>;
>> -	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>> -	snps,reset-active-low;
>> -	/* Reset time is 15ms, 50ms for rtl8211f */
>> -	snps,reset-delays-us = <0 15000 50000>;
>>   	tx_delay = <0x3c>;
>>   	rx_delay = <0x2f>;
>>   	status = "okay";
>> @@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
>>   		reg = <1>;
>>   		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
>>   		pinctrl-names = "default";
>> +		reset-assert-us = <15000>;
>> +		reset-deassert-us = <50000>;
>> +		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>>   	};
>>   };
>>   
> 
> Please disregard/drop this patch.
> 
> I was recently made aware of 'sashiko.dev' and checked whether it had
> also checked my patch, which it did:
> https://sashiko.dev/#/patchset/20260401131551.734456-1-diederik%40cknow-tech.com
> 
> And it turns out that the concern raised is valid (thanks Quentin!), so
> this patch could introduce a regression.
> So it looks like staying with the deprecated properties is actually
> better (in this case?).

Well actually we more or less rely on U-Boot to reset the PHY first now. 
Many rockchip boards in tree require a reset before the PHY can be 
recognized, but we just use the generic "ethernet-phy-ieee802.3-c22" 
compatible.

Another option is to move the reset props to mdio node instead of PHY 
node, though.

Thanks,
Tianling.

> 
> Cheers,
>    Diederik

Re: [PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Tianling Shen]

On 2026/4/15 22:23, Diederik de Haas wrote:
> On Wed Apr 1, 2026 at 3:11 PM CEST, Diederik de Haas wrote:
>> The various snps,reset-* properties are deprecated, so convert them into
>> their replacements.
>>
>> Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
>>   1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>> index 90ce6f0e1dcf..92d044ec696b 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>> @@ -85,10 +85,6 @@ &gmac0_tx_bus2
>>   		     &gmac0_rx_bus2
>>   		     &gmac0_rgmii_clk
>>   		     &gmac0_rgmii_bus>;
>> -	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>> -	snps,reset-active-low;
>> -	/* Reset time is 15ms, 50ms for rtl8211f */
>> -	snps,reset-delays-us = <0 15000 50000>;
>>   	tx_delay = <0x3c>;
>>   	rx_delay = <0x2f>;
>>   	status = "okay";
>> @@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
>>   		reg = <1>;
>>   		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
>>   		pinctrl-names = "default";
>> +		reset-assert-us = <15000>;
>> +		reset-deassert-us = <50000>;
>> +		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>>   	};
>>   };
>>   
> 
> Please disregard/drop this patch.
> 
> I was recently made aware of 'sashiko.dev' and checked whether it had
> also checked my patch, which it did:
> https://sashiko.dev/#/patchset/20260401131551.734456-1-diederik%40cknow-tech.com
> 
> And it turns out that the concern raised is valid (thanks Quentin!), so
> this patch could introduce a regression.
> So it looks like staying with the deprecated properties is actually
> better (in this case?).

Well actually we more or less rely on U-Boot to reset the PHY first now. 
Many rockchip boards in tree require a reset before the PHY can be 
recognized, but we just use the generic "ethernet-phy-ieee802.3-c22" 
compatible.

Another option is to move the reset props to mdio node instead of PHY 
node, though.

Thanks,
Tianling.

> 
> Cheers,
>    Diederik


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Diederik de Haas]

On Mon Apr 20, 2026 at 8:58 AM CEST, Tianling Shen wrote:
> On 2026/4/15 22:23, Diederik de Haas wrote:
>> On Wed Apr 1, 2026 at 3:11 PM CEST, Diederik de Haas wrote:
>>> The various snps,reset-* properties are deprecated, so convert them into
>>> their replacements.
>>>
>>> Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
>>> ---
>>>   arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
>>>   1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> index 90ce6f0e1dcf..92d044ec696b 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> @@ -85,10 +85,6 @@ &gmac0_tx_bus2
>>>   		     &gmac0_rx_bus2
>>>   		     &gmac0_rgmii_clk
>>>   		     &gmac0_rgmii_bus>;
>>> -	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>>> -	snps,reset-active-low;
>>> -	/* Reset time is 15ms, 50ms for rtl8211f */
>>> -	snps,reset-delays-us = <0 15000 50000>;
>>>   	tx_delay = <0x3c>;
>>>   	rx_delay = <0x2f>;
>>>   	status = "okay";
>>> @@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
>>>   		reg = <1>;
>>>   		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
>>>   		pinctrl-names = "default";
>>> +		reset-assert-us = <15000>;
>>> +		reset-deassert-us = <50000>;
>>> +		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>>>   	};
>>>   };
>>>   
>> 
>> Please disregard/drop this patch.
>> 
>> I was recently made aware of 'sashiko.dev' and checked whether it had
>> also checked my patch, which it did:
>> https://sashiko.dev/#/patchset/20260401131551.734456-1-diederik%40cknow-tech.com
>> 
>> And it turns out that the concern raised is valid (thanks Quentin!), so
>> this patch could introduce a regression.
>> So it looks like staying with the deprecated properties is actually
>> better (in this case?).
>
> Well actually we more or less rely on U-Boot to reset the PHY first now. 

This change would introduce such a dependency where it was not there
before, so this could introduce a regression.

> Many rockchip boards in tree require a reset before the PHY can be 
> recognized, but we just use the generic "ethernet-phy-ieee802.3-c22" 
> compatible.

I've identified ~40 Rockchip based boards where there is a dependency on
the bootloader due to using that generic compatible. Some from the start
and some got it added with a similar conversion as I proposed above.
I haven't seen massive bug reports, so it looks like it's currently ok.
I don't like having such a dependency and certainly not adding one where
it previously was not the case.

In other cases, the generic compatible was replaced with a specific one
for the PHY being used, which 'circumvents' the raised concern:
https://lore.kernel.org/linux-rockchip/20260202-px30-eth-phy-v1-0-ef365be64922@cherry.de/

According to the FriendlyELEC schematics I checked, they seem to use the
RTL8211F a LOT. On the NanoPi R6* they use a/the specific compatible:
https://elixir.bootlin.com/linux/v7.0/source/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi#L348

I've sent FriendlyELEC an email to ask whether they ONLY used that PHY
in the R5S (LTS) in which case it is safe to replace the generic
compatible with the specific one. I haven't received a response yet.

> Another option is to move the reset props to mdio node instead of PHY 
> node, though.

I prefer that there's first an agreed upon 'strategy' on how to deal 
with the above mentioned raised concern so that it can be implemented
consistently.

Cheers,
  Diederik

Re: [PATCH 2/2] arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S

[Diederik de Haas]

On Mon Apr 20, 2026 at 8:58 AM CEST, Tianling Shen wrote:
> On 2026/4/15 22:23, Diederik de Haas wrote:
>> On Wed Apr 1, 2026 at 3:11 PM CEST, Diederik de Haas wrote:
>>> The various snps,reset-* properties are deprecated, so convert them into
>>> their replacements.
>>>
>>> Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
>>> ---
>>>   arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
>>>   1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> index 90ce6f0e1dcf..92d044ec696b 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
>>> @@ -85,10 +85,6 @@ &gmac0_tx_bus2
>>>   		     &gmac0_rx_bus2
>>>   		     &gmac0_rgmii_clk
>>>   		     &gmac0_rgmii_bus>;
>>> -	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>>> -	snps,reset-active-low;
>>> -	/* Reset time is 15ms, 50ms for rtl8211f */
>>> -	snps,reset-delays-us = <0 15000 50000>;
>>>   	tx_delay = <0x3c>;
>>>   	rx_delay = <0x2f>;
>>>   	status = "okay";
>>> @@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
>>>   		reg = <1>;
>>>   		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
>>>   		pinctrl-names = "default";
>>> +		reset-assert-us = <15000>;
>>> +		reset-deassert-us = <50000>;
>>> +		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
>>>   	};
>>>   };
>>>   
>> 
>> Please disregard/drop this patch.
>> 
>> I was recently made aware of 'sashiko.dev' and checked whether it had
>> also checked my patch, which it did:
>> https://sashiko.dev/#/patchset/20260401131551.734456-1-diederik%40cknow-tech.com
>> 
>> And it turns out that the concern raised is valid (thanks Quentin!), so
>> this patch could introduce a regression.
>> So it looks like staying with the deprecated properties is actually
>> better (in this case?).
>
> Well actually we more or less rely on U-Boot to reset the PHY first now. 

This change would introduce such a dependency where it was not there
before, so this could introduce a regression.

> Many rockchip boards in tree require a reset before the PHY can be 
> recognized, but we just use the generic "ethernet-phy-ieee802.3-c22" 
> compatible.

I've identified ~40 Rockchip based boards where there is a dependency on
the bootloader due to using that generic compatible. Some from the start
and some got it added with a similar conversion as I proposed above.
I haven't seen massive bug reports, so it looks like it's currently ok.
I don't like having such a dependency and certainly not adding one where
it previously was not the case.

In other cases, the generic compatible was replaced with a specific one
for the PHY being used, which 'circumvents' the raised concern:
https://lore.kernel.org/linux-rockchip/20260202-px30-eth-phy-v1-0-ef365be64922@cherry.de/

According to the FriendlyELEC schematics I checked, they seem to use the
RTL8211F a LOT. On the NanoPi R6* they use a/the specific compatible:
https://elixir.bootlin.com/linux/v7.0/source/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi#L348

I've sent FriendlyELEC an email to ask whether they ONLY used that PHY
in the R5S (LTS) in which case it is safe to replace the generic
compatible with the specific one. I haven't received a response yet.

> Another option is to move the reset props to mdio node instead of PHY 
> node, though.

I prefer that there's first an agreed upon 'strategy' on how to deal 
with the above mentioned raised concern so that it can be implemented
consistently.

Cheers,
  Diederik

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: (subset) [PATCH 0/2] Improve gmac0 DT config for NanoPi R5S

[Heiko Stuebner]

On Wed, 01 Apr 2026 15:11:37 +0200, Diederik de Haas wrote:
> These 2 patches contain a fix for an incorrect pinctlr definition and
> replaces several deprecated snps,reset* properties with their
> non-deprecated replacements.
> 
> Diederik de Haas (2):
>   arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S
>   arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S
      commit: c83c4a09d4c01c91d6c52d6d4d77a06892a3e83b

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

Re: (subset) [PATCH 0/2] Improve gmac0 DT config for NanoPi R5S

[Heiko Stuebner]

On Wed, 01 Apr 2026 15:11:37 +0200, Diederik de Haas wrote:
> These 2 patches contain a fix for an incorrect pinctlr definition and
> replaces several deprecated snps,reset* properties with their
> non-deprecated replacements.
> 
> Diederik de Haas (2):
>   arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S
>   arm64: dts: rockchip: Replace deprecated snps,* props for NanoPi R5S
> 
> [...]

Applied, thanks!

[1/2] arm64: dts: rockchip: Fix gmac0 reset pin for NanoPi R5S
      commit: c83c4a09d4c01c91d6c52d6d4d77a06892a3e83b

Best regards,
-- 
Heiko Stuebner <heiko@sntech.de>

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip