[PATCH 1/5] python3-uvloop: import 0.22.1 from meta-homeassistant

[PATCH 1/5] python3-uvloop: import 0.22.1 from meta-homeassistant

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

uvloop is an asyncio event loop built on libuv. The python3-websockets
test suite exercises it, so bring it into oe-core.

Changes from the meta-homeassistant recipe:
* Build against the oe-core libuv recipe through setup.cfg, instead of
  patching setup.py; drop the Cython pin relaxation, since ~=3.1 already
  allows Cython 3.2.
* LICENSE is "Apache-2.0 OR MIT" (dual-licensed upstream), and the
  vendored libuv licenses are dropped since it is not built.
* Drop aiohttp, psutil and pyopenssl from RDEPENDS; they are only test
  dependencies. Add python3-asyncio.
* Move the maintainer entry to maintainers.inc.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
 meta/conf/distro/include/maintainers.inc      |  1 +
 .../0001-setup.cfg-use-system-libuv.patch     | 21 +++++++++++++++++++
 .../python/python3-uvloop_0.22.1.bb           | 17 +++++++++++++++
 3 files changed, 39 insertions(+)
 create mode 100644 meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
 create mode 100644 meta/recipes-devtools/python/python3-uvloop_0.22.1.bb

diff --git a/meta/conf/distro/include/maintainers.inc b/meta/conf/distro/include/maintainers.inc
index 74db3e44e9..0b2b8c5b8a 100644
--- a/meta/conf/distro/include/maintainers.inc
+++ b/meta/conf/distro/include/maintainers.inc
@@ -750,6 +750,7 @@ RECIPE_MAINTAINER:pn-python3-unittest-automake-output = "Ross Burton <ross.burto
 RECIPE_MAINTAINER:pn-python3-uritools = "Marta Rybczynska <marta.rybczynska@ygreky.com>"
 RECIPE_MAINTAINER:pn-python3-urllib3 = "Tim Orling <tim.orling@konsulko.com>"
 RECIPE_MAINTAINER:pn-python3-uv-build = "Trevor Gamblin <tgamblin@baylibre.com>"
+RECIPE_MAINTAINER:pn-python3-uvloop = "Tim Orling <tim.orling@konsulko.com>"
 RECIPE_MAINTAINER:pn-python3-vcs-versioning = "Trevor Gamblin <tgamblin@baylibre.com>"
 RECIPE_MAINTAINER:pn-python3-vcversioner = "Bruce Ashfield <bruce.ashfield@gmail.com>"
 RECIPE_MAINTAINER:pn-python3-wcwidth = "Tim Orling <tim.orling@konsulko.com>"
diff --git a/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch b/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
new file mode 100644
index 0000000000..d295239b90
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
@@ -0,0 +1,21 @@
+From: Tim Orling <tim.orling@konsulko.com>
+Subject: [PATCH] setup.cfg: use system libuv
+
+Build against the libuv recipe instead of the bundled copy in
+vendor/libuv.
+
+Upstream-Status: Inappropriate [oe-core specific]
+Signed-off-by: Tim Orling <tim.orling@konsulko.com>
+---
+ setup.cfg | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/setup.cfg
++++ b/setup.cfg
+@@ -1,3 +1,6 @@
++[build_ext]
++use_system_libuv = 1
++
+ [egg_info]
+ tag_build = 
+ tag_date = 0
diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
new file mode 100644
index 0000000000..887c262ae7
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
@@ -0,0 +1,17 @@
+SUMMARY = "Fast implementation of asyncio event loop on top of libuv"
+HOMEPAGE = "https://github.com/MagicStack/uvloop"
+BUGTRACKER = "https://github.com/MagicStack/uvloop/issues"
+LICENSE = "Apache-2.0 OR MIT"
+LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
+                    file://LICENSE-MIT;md5=489c8bc34154e4b59f5c58e664f7d70f"
+
+DEPENDS += "libuv python3-wheel-native"
+
+SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
+SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
+
+inherit pypi python_setuptools_build_meta cython
+
+RDEPENDS:${PN} = "python3-asyncio"
+
+BBCLASSEXTEND = "native nativesdk"
-- 
2.47.3

[PATCH 2/5] python3-uvloop: enable ptest

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

The sdist ships the test suite. run-ptest deselects:
* tests that conflict with pytest's output capture;
* tests broken by libuv 1.53.0 spawning with posix_spawn() on Linux,
  which bypasses uvloop's preexec_fn fork hook;
* DNS tests that wait for resolver timeouts without network access,
  which took the suite from 1 to 10 minutes over tap without NAT.

.flake8 and mypy.ini let test_sourcecode skip cleanly when flake8 and
mypy are missing.

Tested with core-image-ptest-python3-uvloop on qemux86-64 (kvm, tap):
455 passed, 35 skipped, 0 failed in 82s, so add it to PTESTS_SLOW.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
 .../distro/include/ptest-packagelists.inc     |  1 +
 .../python/python3-uvloop/run-ptest           | 25 +++++++++++++++++
 .../python/python3-uvloop_0.22.1.bb           | 27 +++++++++++++++++--
 3 files changed, 51 insertions(+), 2 deletions(-)
 create mode 100755 meta/recipes-devtools/python/python3-uvloop/run-ptest

diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc
index bef45bb4d5..50b971bace 100644
--- a/meta/conf/distro/include/ptest-packagelists.inc
+++ b/meta/conf/distro/include/ptest-packagelists.inc
@@ -154,6 +154,7 @@ PTESTS_SLOW = "\
     python3-click \
     python3-cryptography \
     python3-numpy \
+    python3-uvloop \
     python3-xmltodict \
     strace \
     tar \
diff --git a/meta/recipes-devtools/python/python3-uvloop/run-ptest b/meta/recipes-devtools/python/python3-uvloop/run-ptest
new file mode 100755
index 0000000000..db86664f9a
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop/run-ptest
@@ -0,0 +1,25 @@
+#!/bin/sh
+# test_process_streams_redirect: replaces the stdout/stderr fds, which
+# conflicts with pytest's output capture.
+# test_process_preexec_fn_{1,2}, Test_UV_DNS test_getaddrinfo_{8,9}: libuv
+# 1.53.0 spawns with posix_spawn(), so preexec_fn never runs, and an empty
+# host gives EAI_NODATA.
+# test_getaddrinfo_{1,2,3,5,6,11}, Test_AIO_DNS test_getaddrinfo_{8,9}: each
+# DNS lookup waits for the resolver timeout without network access.
+# --deselect matches a node id prefix, so -k handles 1, 2 and 11.
+pytest --automake \
+    -k "not (test_getaddrinfo_1 or test_getaddrinfo_2) or test_getaddrinfo_10 or test_getaddrinfo_12 or test_getaddrinfo_13 or test_getaddrinfo_14 or test_getaddrinfo_15 or test_getaddrinfo_16 or test_getaddrinfo_17 or test_getaddrinfo_18 or test_getaddrinfo_19 or test_getaddrinfo_20 or test_getaddrinfo_21 or test_getaddrinfo_22" \
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_streams_redirect \
+    --deselect=tests/test_process.py::Test_AIO_Process::test_process_streams_redirect \
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_1 \
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_2 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_3 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_5 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_6 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_8 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_9 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_3 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_5 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_6 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_8 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_9
diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
index 887c262ae7..39b6a2602a 100644
--- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
+++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
@@ -7,11 +7,34 @@ LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
 
 DEPENDS += "libuv python3-wheel-native"
 
-SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
+SRC_URI += "\
+    file://0001-setup.cfg-use-system-libuv.patch \
+    file://run-ptest \
+"
 SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
 
-inherit pypi python_setuptools_build_meta cython
+inherit pypi python_setuptools_build_meta cython ptest-python-pytest
 
 RDEPENDS:${PN} = "python3-asyncio"
 
+RDEPENDS:${PN}-ptest += "\
+    python3-ctypes \
+    python3-io \
+    python3-logging \
+    python3-math \
+    python3-multiprocessing \
+    python3-netclient \
+    python3-numbers \
+    python3-pickle \
+    python3-pprint \
+    python3-psutil \
+    python3-pyopenssl \
+    python3-threading \
+"
+
+do_install_ptest:append() {
+    # test_sourcecode needs these to skip cleanly when flake8 and mypy are missing
+    install -m 0644 ${S}/.flake8 ${S}/mypy.ini ${D}${PTEST_PATH}/
+}
+
 BBCLASSEXTEND = "native nativesdk"
-- 
2.47.3

[PATCH 3/5] python3-uvloop: upgrade 0.22.1 -> 0.23.0

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

Upstream replaced the wheel build dependency with packaging.

https://github.com/MagicStack/uvloop/releases/tag/v0.23.0
https://github.com/MagicStack/uvloop/compare/v0.22.1...v0.23.0

Tested with core-image-ptest-python3-uvloop on qemux86-64 (kvm, tap):
471 passed, 36 skipped, 0 failed.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
 .../{python3-uvloop_0.22.1.bb => python3-uvloop_0.23.0.bb}    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 rename meta/recipes-devtools/python/{python3-uvloop_0.22.1.bb => python3-uvloop_0.23.0.bb} (89%)

diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
similarity index 89%
rename from meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
rename to meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
index 39b6a2602a..7321429483 100644
--- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
+++ b/meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
@@ -5,13 +5,13 @@ LICENSE = "Apache-2.0 OR MIT"
 LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
                     file://LICENSE-MIT;md5=489c8bc34154e4b59f5c58e664f7d70f"
 
-DEPENDS += "libuv python3-wheel-native"
+DEPENDS += "libuv python3-packaging-native"
 
 SRC_URI += "\
     file://0001-setup.cfg-use-system-libuv.patch \
     file://run-ptest \
 "
-SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
+SRC_URI[sha256sum] = "28d160f51ab4da3b187063652e643dea6831072add4adc1e6d62afbe73b6be27"
 
 inherit pypi python_setuptools_build_meta cython ptest-python-pytest
 
-- 
2.47.3

[PATCH 4/5] python3-websockets: enable ptest; use git fetcher

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

The PyPI sdist prunes tests/, so fetch the 17.1 tag from git. This
re-enables ptest, reverted in a0488f2e1d when the sdist dropped the tests.

Upstream advises packagers against running the suite because timeout
tests can flake on slow build farms; under ptest it runs on the target,
and it passed repeatedly on qemux86-64.

tests/trio is ignored because python3-trio is not in oe-core.
python3-misc provides tracemalloc for the test utilities. Set
CVE_PRODUCT to the NVD websockets_project:websockets, since the pypi
default no longer applies and never matched.

Tested with core-image-ptest-python3-websockets on qemux86-64 (kvm):
2031 passed, 75 skipped, 0 failed in 82s, so add it to PTESTS_SLOW.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
 meta/conf/distro/include/ptest-packagelists.inc   |  1 +
 .../python/python3-websockets/run-ptest           |  3 +++
 .../python/python3-websockets_17.1.bb             | 15 +++++++++++++--
 3 files changed, 17 insertions(+), 2 deletions(-)
 create mode 100755 meta/recipes-devtools/python/python3-websockets/run-ptest

diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc
index 50b971bace..7ec75757bc 100644
--- a/meta/conf/distro/include/ptest-packagelists.inc
+++ b/meta/conf/distro/include/ptest-packagelists.inc
@@ -155,6 +155,7 @@ PTESTS_SLOW = "\
     python3-cryptography \
     python3-numpy \
     python3-uvloop \
+    python3-websockets \
     python3-xmltodict \
     strace \
     tar \
diff --git a/meta/recipes-devtools/python/python3-websockets/run-ptest b/meta/recipes-devtools/python/python3-websockets/run-ptest
new file mode 100755
index 0000000000..a71ba0b951
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-websockets/run-ptest
@@ -0,0 +1,3 @@
+#!/bin/sh
+# tests/trio requires python3-trio, which is not in oe-core
+pytest --automake --ignore=tests/trio
diff --git a/meta/recipes-devtools/python/python3-websockets_17.1.bb b/meta/recipes-devtools/python/python3-websockets_17.1.bb
index b5ee3ec661..d1bec373e0 100644
--- a/meta/recipes-devtools/python/python3-websockets_17.1.bb
+++ b/meta/recipes-devtools/python/python3-websockets_17.1.bb
@@ -4,12 +4,23 @@ HOMEPAGE = "https://github.com/aaugustin/websockets"
 LICENSE = "BSD-3-Clause"
 LIC_FILES_CHKSUM = "file://LICENSE;md5=51924a6af4495b8cfaee1b1da869b6f4"
 
-inherit pypi python_setuptools_build_meta
+# The PyPI sdist prunes tests, so fetch from git for ptest
+SRC_URI = "\
+    git://github.com/python-websockets/websockets;branch=main;protocol=https;tag=${PV} \
+    file://run-ptest \
+"
+SRCREV = "e87ea9be0373edd5065b5e94dfa714cfde23023b"
+
+CVE_PRODUCT = "websockets_project:websockets"
 
-SRC_URI[sha256sum] = "acfea4c20bf54384883ea33b1240fc1db4f52e190823a4e2b334bc3e8bfca96a"
+inherit python_setuptools_build_meta ptest-python-pytest
 
 BBCLASSEXTEND = "native nativesdk"
 
 RDEPENDS:${PN} = " \
     python3-asyncio \
 "
+
+RDEPENDS:${PN}-ptest += "\
+    python3-misc \
+"
-- 
2.47.3

[PATCH 5/5] python3-websockets: upgrade 17.1 -> 17.4

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

17.4 fixes a denial of service by memory exhaustion: recv() now rejects
fragmented messages split into more than 4096 frames (tunable via
WEBSOCKETS_MAX_FRAGMENTS). 17.2 and 17.3 are bug fix releases.

17.3 added uvloop variants of the asyncio tests, so add python3-uvloop
to the ptest dependencies.

https://websockets.readthedocs.io/en/stable/project/changelog.html
https://github.com/python-websockets/websockets/compare/17.1...17.4

Tested with core-image-ptest-python3-websockets on qemux86-64 (kvm,
slirp): 2550 passed, 114 skipped, 0 failed.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
 .../{python3-websockets_17.1.bb => python3-websockets_17.4.bb} | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
 rename meta/recipes-devtools/python/{python3-websockets_17.1.bb => python3-websockets_17.4.bb} (89%)

diff --git a/meta/recipes-devtools/python/python3-websockets_17.1.bb b/meta/recipes-devtools/python/python3-websockets_17.4.bb
similarity index 89%
rename from meta/recipes-devtools/python/python3-websockets_17.1.bb
rename to meta/recipes-devtools/python/python3-websockets_17.4.bb
index d1bec373e0..a2357ebee6 100644
--- a/meta/recipes-devtools/python/python3-websockets_17.1.bb
+++ b/meta/recipes-devtools/python/python3-websockets_17.4.bb
@@ -9,7 +9,7 @@ SRC_URI = "\
     git://github.com/python-websockets/websockets;branch=main;protocol=https;tag=${PV} \
     file://run-ptest \
 "
-SRCREV = "e87ea9be0373edd5065b5e94dfa714cfde23023b"
+SRCREV = "625a59ed613ac60e60d577dd64b8641d59ecb2b1"
 
 CVE_PRODUCT = "websockets_project:websockets"
 
@@ -23,4 +23,5 @@ RDEPENDS:${PN} = " \
 
 RDEPENDS:${PN}-ptest += "\
     python3-misc \
+    python3-uvloop \
 "
-- 
2.47.3

Patchtest results for [PATCH 2/5] python3-uvloop: enable ptest

[patchtest]

[-- Attachment #1: Type: text/plain, Size: 3232 bytes --]

Thank you for your submission. Patchtest identified one
or more issues with the patch. Please see the log below for
more information:

---
Testing patch /home/patchtest/share/mboxes/2-5-python3-uvloop-enable-ptest.patch

FAIL: test max line length: Patch line too long (current length 333, maximum is 200) (test_metadata.TestMetadata.test_max_line_length)

PASS: test Signed-off-by presence (test_mbox.TestMbox.test_signed_off_by_presence)
PASS: test auh changelog truncation notice (test_mbox.TestMbox.test_auh_changelog_truncation_notice)
PASS: test author valid (test_mbox.TestMbox.test_author_valid)
PASS: test commit message presence (test_mbox.TestMbox.test_commit_message_presence)
PASS: test commit message user tags (test_mbox.TestMbox.test_commit_message_user_tags)
PASS: test mbox format (test_mbox.TestMbox.test_mbox_format)
PASS: test non-AUH upgrade (test_mbox.TestMbox.test_non_auh_upgrade)
PASS: test shortlog format (test_mbox.TestMbox.test_shortlog_format)
PASS: test shortlog length (test_mbox.TestMbox.test_shortlog_length)
PASS: test target mailing list (test_mbox.TestMbox.test_target_mailing_list)

SKIP: pretest pylint: No python related patches, skipping test (test_python_pylint.PyLint.pretest_pylint)
SKIP: pretest src uri left files: Patch cannot be merged (test_metadata.TestMetadata.pretest_src_uri_left_files)
SKIP: test CVE check ignore: No modified recipes or older target branch, skipping test (test_metadata.TestMetadata.test_cve_check_ignore)
SKIP: test CVE tag format: No new source patches introduced (test_patch.TestPatch.test_cve_tag_format)
SKIP: test Signed-off-by presence: No new source patches introduced (test_patch.TestPatch.test_signed_off_by_presence)
SKIP: test Upstream-Status presence: No new source patches introduced (test_patch.TestPatch.test_upstream_status_presence_format)
SKIP: test bugzilla entry format: No bug ID found (test_mbox.TestMbox.test_bugzilla_entry_format)
SKIP: test lic files chksum modified not mentioned: No modified recipes, skipping test (test_metadata.TestMetadata.test_lic_files_chksum_modified_not_mentioned)
SKIP: test lic files chksum presence: No added recipes, skipping test (test_metadata.TestMetadata.test_lic_files_chksum_presence)
SKIP: test license presence: No added recipes, skipping test (test_metadata.TestMetadata.test_license_presence)
SKIP: test pylint: No python related patches, skipping test (test_python_pylint.PyLint.test_pylint)
SKIP: test series merge on head: Merge test is disabled for now (test_mbox.TestMbox.test_series_merge_on_head)
SKIP: test src uri left files: Patch cannot be merged (test_metadata.TestMetadata.test_src_uri_left_files)
SKIP: test summary presence: No added recipes, skipping test (test_metadata.TestMetadata.test_summary_presence)

---

Please address the issues identified and
submit a new revision of the patch, or alternatively, reply to this
email with an explanation of why the patch should be accepted. If you
believe these results are due to an error in patchtest, please submit a
bug at https://bugzilla.yoctoproject.org/ (use the 'Patchtest' category
under 'Yocto Project Subprojects'). For more information on specific
failures, see: https://wiki.yoctoproject.org/wiki/Patchtest. Thank
you!

Re: [OE-core] [PATCH 2/5] python3-uvloop: enable ptest

[Mathieu Dubois-Briand]

On Mon Nov 2, 2026 at 2:18 AM CET, Tim Orling via openembedded-core wrote:
> From: Tim Orling <tim.orling@konsulko.com>
>
> The sdist ships the test suite. run-ptest deselects:
> * tests that conflict with pytest's output capture;
> * tests broken by libuv 1.53.0 spawning with posix_spawn() on Linux,
>   which bypasses uvloop's preexec_fn fork hook;
> * DNS tests that wait for resolver timeouts without network access,
>   which took the suite from 1 to 10 minutes over tap without NAT.
>
> .flake8 and mypy.ini let test_sourcecode skip cleanly when flake8 and
> mypy are missing.
>
> Tested with core-image-ptest-python3-uvloop on qemux86-64 (kvm, tap):
> 455 passed, 35 skipped, 0 failed in 82s, so add it to PTESTS_SLOW.
>
> AI-Generated: Uses Claude Code (Claude Opus 5.5)
> Signed-off-by: Tim Orling <tim.orling@konsulko.com>
> ---

Hi Tim,

Thanks for your patch.

I can see it tends to fail on riscv.

First build:
Failed ptests:
{'python3-uvloop': ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression',
                    'tests/test_tcp.py:Test_UV_TCPSSL.test_create_connection_ssl_1',
                    'tests/test_tcp.py:Test_UV_TCPSSL.test_create_server_ssl_over_ssl',
                    'tests/test_tcp.py:Test_UV_TCPSSL.test_renegotiation',
                    'tests/test_tcp.py:Test_AIO_TCPSSL.test_create_connection_ssl_1',
                    'tests/test_unix.py:Test_UV_UnixSSL.test_create_unix_connection_ssl_1',
                    'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_connection_ssl_1',
                    'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_server_ssl_1']}
https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2713

Second build:
Failed ptests:
{'python3-uvloop': ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression']}
https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2714

This is riscv, so emulation is slower than for other architectures.
Maybe we need to relax a bit some timings.

Thanks,
Mathieu

-- 
Mathieu Dubois-Briand, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [OE-core] [PATCH 2/5] python3-uvloop: enable ptest

[Tim Orling]

[-- Attachment #1: Type: text/plain, Size: 2835 bytes --]

I have a v2 in testing which drops 8 time sensitive tests on qemuriscv64.
I'll double check the skips against your list of failures before I send.

On Mon, Nov 2, 2026 at 06:10 Mathieu Dubois-Briand via openembedded-core
<mathieu.dubois-briand=bootlin.com@lists.openembedded.org> wrote:

> On Mon Nov 2, 2026 at 2:18 AM CET, Tim Orling via openembedded-core wrote:
> > From: Tim Orling <tim.orling@konsulko.com>
> >
> > The sdist ships the test suite. run-ptest deselects:
> > * tests that conflict with pytest's output capture;
> > * tests broken by libuv 1.53.0 spawning with posix_spawn() on Linux,
> >   which bypasses uvloop's preexec_fn fork hook;
> > * DNS tests that wait for resolver timeouts without network access,
> >   which took the suite from 1 to 10 minutes over tap without NAT.
> >
> > .flake8 and mypy.ini let test_sourcecode skip cleanly when flake8 and
> > mypy are missing.
> >
> > Tested with core-image-ptest-python3-uvloop on qemux86-64 (kvm, tap):
> > 455 passed, 35 skipped, 0 failed in 82s, so add it to PTESTS_SLOW.
> >
> > AI-Generated: Uses Claude Code (Claude Opus 5.5)
> > Signed-off-by: Tim Orling <tim.orling@konsulko.com>
> > ---
>
> Hi Tim,
>
> Thanks for your patch.
>
> I can see it tends to fail on riscv.
>
> First build:
> Failed ptests:
> {'python3-uvloop':
> ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression',
>
> 'tests/test_tcp.py:Test_UV_TCPSSL.test_create_connection_ssl_1',
>
> 'tests/test_tcp.py:Test_UV_TCPSSL.test_create_server_ssl_over_ssl',
>                     'tests/test_tcp.py:Test_UV_TCPSSL.test_renegotiation',
>
> 'tests/test_tcp.py:Test_AIO_TCPSSL.test_create_connection_ssl_1',
>
> 'tests/test_unix.py:Test_UV_UnixSSL.test_create_unix_connection_ssl_1',
>
> 'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_connection_ssl_1',
>
> 'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_server_ssl_1']}
> https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2713
>
> Second build:
> Failed ptests:
> {'python3-uvloop':
> ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression']}
> https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2714
>
> This is riscv, so emulation is slower than for other architectures.
> Maybe we need to relax a bit some timings.
>
> Thanks,
> Mathieu
>
> --
> Mathieu Dubois-Briand, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#249211):
> https://lists.openembedded.org/g/openembedded-core/message/249211
> Mute This Topic: https://lists.openembedded.org/mt/122051652/924729
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [
> ticotimo@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>

[-- Attachment #2: Type: text/html, Size: 4585 bytes --]

[PATCH v2 1/5] python3-uvloop: import 0.22.1 from meta-homeassistant

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

uvloop is an asyncio event loop built on libuv. The python3-websockets
test suite exercises it, so bring it into oe-core.

Changes from the meta-homeassistant recipe:
* Build against the oe-core libuv recipe through setup.cfg, instead of
  patching setup.py; drop the Cython pin relaxation, since ~=3.1 already
  allows Cython 3.2.
* LICENSE is "Apache-2.0 OR MIT" (dual-licensed upstream), and the
  vendored libuv licenses are dropped since it is not built.
* Drop aiohttp, psutil and pyopenssl from RDEPENDS; they are only test
  dependencies. Add python3-asyncio.
* Move the maintainer entry to maintainers.inc.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Unchanged from v1

 meta/conf/distro/include/maintainers.inc      |  1 +
 .../0001-setup.cfg-use-system-libuv.patch     | 21 +++++++++++++++++++
 .../python/python3-uvloop_0.22.1.bb           | 17 +++++++++++++++
 3 files changed, 39 insertions(+)
 create mode 100644 meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
 create mode 100644 meta/recipes-devtools/python/python3-uvloop_0.22.1.bb

diff --git a/meta/conf/distro/include/maintainers.inc b/meta/conf/distro/include/maintainers.inc
index 74db3e44e9..0b2b8c5b8a 100644
--- a/meta/conf/distro/include/maintainers.inc
+++ b/meta/conf/distro/include/maintainers.inc
@@ -750,6 +750,7 @@ RECIPE_MAINTAINER:pn-python3-unittest-automake-output = "Ross Burton <ross.burto
 RECIPE_MAINTAINER:pn-python3-uritools = "Marta Rybczynska <marta.rybczynska@ygreky.com>"
 RECIPE_MAINTAINER:pn-python3-urllib3 = "Tim Orling <tim.orling@konsulko.com>"
 RECIPE_MAINTAINER:pn-python3-uv-build = "Trevor Gamblin <tgamblin@baylibre.com>"
+RECIPE_MAINTAINER:pn-python3-uvloop = "Tim Orling <tim.orling@konsulko.com>"
 RECIPE_MAINTAINER:pn-python3-vcs-versioning = "Trevor Gamblin <tgamblin@baylibre.com>"
 RECIPE_MAINTAINER:pn-python3-vcversioner = "Bruce Ashfield <bruce.ashfield@gmail.com>"
 RECIPE_MAINTAINER:pn-python3-wcwidth = "Tim Orling <tim.orling@konsulko.com>"
diff --git a/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch b/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
new file mode 100644
index 0000000000..d295239b90
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
@@ -0,0 +1,21 @@
+From: Tim Orling <tim.orling@konsulko.com>
+Subject: [PATCH] setup.cfg: use system libuv
+
+Build against the libuv recipe instead of the bundled copy in
+vendor/libuv.
+
+Upstream-Status: Inappropriate [oe-core specific]
+Signed-off-by: Tim Orling <tim.orling@konsulko.com>
+---
+ setup.cfg | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/setup.cfg
++++ b/setup.cfg
+@@ -1,3 +1,6 @@
++[build_ext]
++use_system_libuv = 1
++
+ [egg_info]
+ tag_build = 
+ tag_date = 0
diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
new file mode 100644
index 0000000000..887c262ae7
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
@@ -0,0 +1,17 @@
+SUMMARY = "Fast implementation of asyncio event loop on top of libuv"
+HOMEPAGE = "https://github.com/MagicStack/uvloop"
+BUGTRACKER = "https://github.com/MagicStack/uvloop/issues"
+LICENSE = "Apache-2.0 OR MIT"
+LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
+                    file://LICENSE-MIT;md5=489c8bc34154e4b59f5c58e664f7d70f"
+
+DEPENDS += "libuv python3-wheel-native"
+
+SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
+SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
+
+inherit pypi python_setuptools_build_meta cython
+
+RDEPENDS:${PN} = "python3-asyncio"
+
+BBCLASSEXTEND = "native nativesdk"
-- 
2.47.3

[PATCH v2 2/5] python3-uvloop: enable ptest

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

The sdist ships the test suite. run-ptest deselects:
* tests that conflict with pytest's output capture;
* tests broken by libuv 1.53.0 spawning with posix_spawn() on Linux,
  which bypasses uvloop's preexec_fn fork hook;
* DNS tests that wait for resolver timeouts without network access,
  which took the suite from 1 to 10 minutes over tap without NAT;
* on riscv64 only, TLS stress tests, the issue39 deadlock check and a
  socket cancellation test, whose fixed timeouts are too short for qemu
  without KVM.

.flake8 and mypy.ini let test_sourcecode skip cleanly when flake8 and
mypy are missing.

Tested with core-image-ptest-python3-uvloop on qemux86-64. It takes
over 30 seconds, so add it to PTESTS_SLOW.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v2:
- Skip 13 timing sensitive tests on riscv64 only, covering the
  qemuriscv64 AutoBuilder failures plus their counterparts in the other
  event loop class and test_socket_cancel_sock_sendall, found in 10 runs
  under load (stress-ng)
- Build the -k expression in a loop to fix patchtest's line length check
- Drop the test counts from the commit message

 .../distro/include/ptest-packagelists.inc     |  1 +
 .../python/python3-uvloop/run-ptest           | 50 +++++++++++++++++++
 .../python/python3-uvloop_0.22.1.bb           | 27 +++++++++-
 3 files changed, 76 insertions(+), 2 deletions(-)
 create mode 100755 meta/recipes-devtools/python/python3-uvloop/run-ptest

diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc
index bef45bb4d5..50b971bace 100644
--- a/meta/conf/distro/include/ptest-packagelists.inc
+++ b/meta/conf/distro/include/ptest-packagelists.inc
@@ -154,6 +154,7 @@ PTESTS_SLOW = "\
     python3-click \
     python3-cryptography \
     python3-numpy \
+    python3-uvloop \
     python3-xmltodict \
     strace \
     tar \
diff --git a/meta/recipes-devtools/python/python3-uvloop/run-ptest b/meta/recipes-devtools/python/python3-uvloop/run-ptest
new file mode 100755
index 0000000000..0cb9a26b88
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop/run-ptest
@@ -0,0 +1,50 @@
+#!/bin/sh
+# test_process_streams_redirect: replaces the stdout/stderr fds, which
+# conflicts with pytest's output capture.
+# test_process_preexec_fn_{1,2}, Test_UV_DNS test_getaddrinfo_{8,9}: libuv
+# 1.53.0 spawns with posix_spawn(), so preexec_fn never runs, and an empty
+# host gives EAI_NODATA.
+# test_getaddrinfo_{1,2,3,5,6,11}, Test_AIO_DNS test_getaddrinfo_{8,9}: each
+# DNS lookup waits for the resolver timeout without network access.
+# --deselect matches a node id prefix, so -k handles 1, 2 and 11.
+# riscv64: qemu runs without KVM there, too slow for the fixed timeouts in
+# the TLS stress tests, the issue39 deadlock check (signal.alarm(5)) and
+# test_socket_cancel_sock_sendall, which must cancel within 0.2s.
+SLOW=""
+if [ "$(uname -m)" = "riscv64" ]; then
+    SLOW="
+        --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_connection_ssl_1
+        --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_server_ssl_over_ssl
+        --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_renegotiation
+        --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_connection_ssl_1
+        --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_server_ssl_over_ssl
+        --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_renegotiation
+        --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_connection_ssl_1
+        --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_server_ssl_1
+        --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_connection_ssl_1
+        --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_server_ssl_1
+        --deselect=tests/test_regr1.py::TestIssue39Regr::test_issue39_regression
+        --deselect=tests/test_sockets.py::TestUVSockets::test_socket_cancel_sock_sendall
+        --deselect=tests/test_sockets.py::TestAIOSockets::test_socket_cancel_sock_sendall
+    "
+fi
+KEEP="not (test_getaddrinfo_1 or test_getaddrinfo_2)"
+for n in 10 12 13 14 15 16 17 18 19 20 21 22; do
+    KEEP="$KEEP or test_getaddrinfo_$n"
+done
+pytest --automake $SLOW \
+    -k "$KEEP" \
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_streams_redirect \
+    --deselect=tests/test_process.py::Test_AIO_Process::test_process_streams_redirect \
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_1 \
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_2 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_3 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_5 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_6 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_8 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_9 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_3 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_5 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_6 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_8 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_9
diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
index 887c262ae7..39b6a2602a 100644
--- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
+++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
@@ -7,11 +7,34 @@ LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
 
 DEPENDS += "libuv python3-wheel-native"
 
-SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
+SRC_URI += "\
+    file://0001-setup.cfg-use-system-libuv.patch \
+    file://run-ptest \
+"
 SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
 
-inherit pypi python_setuptools_build_meta cython
+inherit pypi python_setuptools_build_meta cython ptest-python-pytest
 
 RDEPENDS:${PN} = "python3-asyncio"
 
+RDEPENDS:${PN}-ptest += "\
+    python3-ctypes \
+    python3-io \
+    python3-logging \
+    python3-math \
+    python3-multiprocessing \
+    python3-netclient \
+    python3-numbers \
+    python3-pickle \
+    python3-pprint \
+    python3-psutil \
+    python3-pyopenssl \
+    python3-threading \
+"
+
+do_install_ptest:append() {
+    # test_sourcecode needs these to skip cleanly when flake8 and mypy are missing
+    install -m 0644 ${S}/.flake8 ${S}/mypy.ini ${D}${PTEST_PATH}/
+}
+
 BBCLASSEXTEND = "native nativesdk"
-- 
2.47.3

[PATCH v2 3/5] python3-uvloop: upgrade 0.22.1 -> 0.23.0

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

Upstream replaced the wheel build dependency with packaging.

https://github.com/MagicStack/uvloop/releases/tag/v0.23.0
https://github.com/MagicStack/uvloop/compare/v0.22.1...v0.23.0

Tested with core-image-ptest-python3-uvloop on qemux86-64 and
qemuriscv64.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v2:
- Drop the test counts from the commit message

 .../{python3-uvloop_0.22.1.bb => python3-uvloop_0.23.0.bb}    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 rename meta/recipes-devtools/python/{python3-uvloop_0.22.1.bb => python3-uvloop_0.23.0.bb} (89%)

diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
similarity index 89%
rename from meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
rename to meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
index 39b6a2602a..7321429483 100644
--- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
+++ b/meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
@@ -5,13 +5,13 @@ LICENSE = "Apache-2.0 OR MIT"
 LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
                     file://LICENSE-MIT;md5=489c8bc34154e4b59f5c58e664f7d70f"
 
-DEPENDS += "libuv python3-wheel-native"
+DEPENDS += "libuv python3-packaging-native"
 
 SRC_URI += "\
     file://0001-setup.cfg-use-system-libuv.patch \
     file://run-ptest \
 "
-SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
+SRC_URI[sha256sum] = "28d160f51ab4da3b187063652e643dea6831072add4adc1e6d62afbe73b6be27"
 
 inherit pypi python_setuptools_build_meta cython ptest-python-pytest
 
-- 
2.47.3

[PATCH v2 4/5] python3-websockets: enable ptest; use git fetcher

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

The PyPI sdist prunes tests/, so fetch the 17.1 tag from git. This
re-enables ptest, reverted in a0488f2e1d when the sdist dropped the tests.

Upstream advises packagers against running the suite because timeout
tests can flake on slow build farms; under ptest it runs on the target,
and it passed repeatedly on qemux86-64.

tests/trio is ignored because python3-trio is not in oe-core.
python3-misc provides tracemalloc for the test utilities. Set
CVE_PRODUCT to the NVD websockets_project:websockets, since the pypi
default no longer applies and never matched.

Tested with core-image-ptest-python3-websockets on qemux86-64. It takes
over 30 seconds, so add it to PTESTS_SLOW.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v2:
- Drop the test counts from the commit message

 meta/conf/distro/include/ptest-packagelists.inc   |  1 +
 .../python/python3-websockets/run-ptest           |  3 +++
 .../python/python3-websockets_17.1.bb             | 15 +++++++++++++--
 3 files changed, 17 insertions(+), 2 deletions(-)
 create mode 100755 meta/recipes-devtools/python/python3-websockets/run-ptest

diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc
index 50b971bace..7ec75757bc 100644
--- a/meta/conf/distro/include/ptest-packagelists.inc
+++ b/meta/conf/distro/include/ptest-packagelists.inc
@@ -155,6 +155,7 @@ PTESTS_SLOW = "\
     python3-cryptography \
     python3-numpy \
     python3-uvloop \
+    python3-websockets \
     python3-xmltodict \
     strace \
     tar \
diff --git a/meta/recipes-devtools/python/python3-websockets/run-ptest b/meta/recipes-devtools/python/python3-websockets/run-ptest
new file mode 100755
index 0000000000..a71ba0b951
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-websockets/run-ptest
@@ -0,0 +1,3 @@
+#!/bin/sh
+# tests/trio requires python3-trio, which is not in oe-core
+pytest --automake --ignore=tests/trio
diff --git a/meta/recipes-devtools/python/python3-websockets_17.1.bb b/meta/recipes-devtools/python/python3-websockets_17.1.bb
index b5ee3ec661..d1bec373e0 100644
--- a/meta/recipes-devtools/python/python3-websockets_17.1.bb
+++ b/meta/recipes-devtools/python/python3-websockets_17.1.bb
@@ -4,12 +4,23 @@ HOMEPAGE = "https://github.com/aaugustin/websockets"
 LICENSE = "BSD-3-Clause"
 LIC_FILES_CHKSUM = "file://LICENSE;md5=51924a6af4495b8cfaee1b1da869b6f4"
 
-inherit pypi python_setuptools_build_meta
+# The PyPI sdist prunes tests, so fetch from git for ptest
+SRC_URI = "\
+    git://github.com/python-websockets/websockets;branch=main;protocol=https;tag=${PV} \
+    file://run-ptest \
+"
+SRCREV = "e87ea9be0373edd5065b5e94dfa714cfde23023b"
+
+CVE_PRODUCT = "websockets_project:websockets"
 
-SRC_URI[sha256sum] = "acfea4c20bf54384883ea33b1240fc1db4f52e190823a4e2b334bc3e8bfca96a"
+inherit python_setuptools_build_meta ptest-python-pytest
 
 BBCLASSEXTEND = "native nativesdk"
 
 RDEPENDS:${PN} = " \
     python3-asyncio \
 "
+
+RDEPENDS:${PN}-ptest += "\
+    python3-misc \
+"
-- 
2.47.3

[PATCH v2 5/5] python3-websockets: upgrade 17.1 -> 17.4

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

17.4 fixes a denial of service by memory exhaustion: recv() now rejects
fragmented messages split into more than 4096 frames (tunable via
WEBSOCKETS_MAX_FRAGMENTS). 17.2 and 17.3 are bug fix releases.

17.3 added uvloop variants of the asyncio tests, so add python3-uvloop
to the ptest dependencies.

https://websockets.readthedocs.io/en/stable/project/changelog.html
https://github.com/python-websockets/websockets/compare/17.1...17.4

Tested with core-image-ptest-python3-websockets on qemux86-64 and
qemuriscv64.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v2:
- Drop the test counts from the commit message

 .../{python3-websockets_17.1.bb => python3-websockets_17.4.bb} | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
 rename meta/recipes-devtools/python/{python3-websockets_17.1.bb => python3-websockets_17.4.bb} (89%)

diff --git a/meta/recipes-devtools/python/python3-websockets_17.1.bb b/meta/recipes-devtools/python/python3-websockets_17.4.bb
similarity index 89%
rename from meta/recipes-devtools/python/python3-websockets_17.1.bb
rename to meta/recipes-devtools/python/python3-websockets_17.4.bb
index d1bec373e0..a2357ebee6 100644
--- a/meta/recipes-devtools/python/python3-websockets_17.1.bb
+++ b/meta/recipes-devtools/python/python3-websockets_17.4.bb
@@ -9,7 +9,7 @@ SRC_URI = "\
     git://github.com/python-websockets/websockets;branch=main;protocol=https;tag=${PV} \
     file://run-ptest \
 "
-SRCREV = "e87ea9be0373edd5065b5e94dfa714cfde23023b"
+SRCREV = "625a59ed613ac60e60d577dd64b8641d59ecb2b1"
 
 CVE_PRODUCT = "websockets_project:websockets"
 
@@ -23,4 +23,5 @@ RDEPENDS:${PN} = " \
 
 RDEPENDS:${PN}-ptest += "\
     python3-misc \
+    python3-uvloop \
 "
-- 
2.47.3

Re: [PATCH v2 2/5] python3-uvloop: enable ptest

[Trevor Gamblin]

On Tue Nov 3, 2026 at 2:38 PM EST, tim.orling wrote:
> From: Tim Orling <tim.orling@konsulko.com>
>
> The sdist ships the test suite. run-ptest deselects:
> * tests that conflict with pytest's output capture;
> * tests broken by libuv 1.53.0 spawning with posix_spawn() on Linux,
>   which bypasses uvloop's preexec_fn fork hook;
> * DNS tests that wait for resolver timeouts without network access,
>   which took the suite from 1 to 10 minutes over tap without NAT;
> * on riscv64 only, TLS stress tests, the issue39 deadlock check and a
>   socket cancellation test, whose fixed timeouts are too short for qemu
>   without KVM.
>
> .flake8 and mypy.ini let test_sourcecode skip cleanly when flake8 and
> mypy are missing.
>
> Tested with core-image-ptest-python3-uvloop on qemux86-64. It takes
> over 30 seconds, so add it to PTESTS_SLOW.
>
> AI-Generated: Uses Claude Code (Claude Opus 5.5)
> Signed-off-by: Tim Orling <tim.orling@konsulko.com>
> ---
> Changes in v2:
> - Skip 13 timing sensitive tests on riscv64 only, covering the
>   qemuriscv64 AutoBuilder failures plus their counterparts in the other
>   event loop class and test_socket_cancel_sock_sendall, found in 10 runs
>   under load (stress-ng)
> - Build the -k expression in a loop to fix patchtest's line length check
> - Drop the test counts from the commit message
>
>  .../distro/include/ptest-packagelists.inc     |  1 +
>  .../python/python3-uvloop/run-ptest           | 50 +++++++++++++++++++
>  .../python/python3-uvloop_0.22.1.bb           | 27 +++++++++-
>  3 files changed, 76 insertions(+), 2 deletions(-)
>  create mode 100755 meta/recipes-devtools/python/python3-uvloop/run-ptest
>
> diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc
> index bef45bb4d5..50b971bace 100644
> --- a/meta/conf/distro/include/ptest-packagelists.inc
> +++ b/meta/conf/distro/include/ptest-packagelists.inc
> @@ -154,6 +154,7 @@ PTESTS_SLOW = "\
>      python3-click \
>      python3-cryptography \
>      python3-numpy \
> +    python3-uvloop \
>      python3-xmltodict \
>      strace \
>      tar \
> diff --git a/meta/recipes-devtools/python/python3-uvloop/run-ptest b/meta/recipes-devtools/python/python3-uvloop/run-ptest
> new file mode 100755
> index 0000000000..0cb9a26b88
> --- /dev/null
> +++ b/meta/recipes-devtools/python/python3-uvloop/run-ptest
> @@ -0,0 +1,50 @@
> +#!/bin/sh
> +# test_process_streams_redirect: replaces the stdout/stderr fds, which
> +# conflicts with pytest's output capture.
> +# test_process_preexec_fn_{1,2}, Test_UV_DNS test_getaddrinfo_{8,9}: libuv
> +# 1.53.0 spawns with posix_spawn(), so preexec_fn never runs, and an empty
> +# host gives EAI_NODATA.
> +# test_getaddrinfo_{1,2,3,5,6,11}, Test_AIO_DNS test_getaddrinfo_{8,9}: each
> +# DNS lookup waits for the resolver timeout without network access.
> +# --deselect matches a node id prefix, so -k handles 1, 2 and 11.
> +# riscv64: qemu runs without KVM there, too slow for the fixed timeouts in
> +# the TLS stress tests, the issue39 deadlock check (signal.alarm(5)) and
> +# test_socket_cancel_sock_sendall, which must cancel within 0.2s.
> +SLOW=""
> +if [ "$(uname -m)" = "riscv64" ]; then
> +    SLOW="
> +        --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_connection_ssl_1
> +        --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_server_ssl_over_ssl
> +        --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_renegotiation
> +        --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_connection_ssl_1
> +        --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_server_ssl_over_ssl
> +        --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_renegotiation
> +        --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_connection_ssl_1
> +        --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_server_ssl_1
> +        --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_connection_ssl_1
> +        --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_server_ssl_1
> +        --deselect=tests/test_regr1.py::TestIssue39Regr::test_issue39_regression
> +        --deselect=tests/test_sockets.py::TestUVSockets::test_socket_cancel_sock_sendall
> +        --deselect=tests/test_sockets.py::TestAIOSockets::test_socket_cancel_sock_sendall
> +    "
> +fi
> +KEEP="not (test_getaddrinfo_1 or test_getaddrinfo_2)"

This 'KEEP' variable name seems misleading given that it's using 'not' to avoid
running those two test cases, but then gets built up in a loop. I think it'd be
better to just add them with --deselect like the others, even if it ends up
being more verbose.

> +for n in 10 12 13 14 15 16 17 18 19 20 21 22; do
> +    KEEP="$KEEP or test_getaddrinfo_$n"
> +done
> +pytest --automake $SLOW \
> +    -k "$KEEP" \
> +    --deselect=tests/test_process.py::Test_UV_Process::test_process_streams_redirect \
> +    --deselect=tests/test_process.py::Test_AIO_Process::test_process_streams_redirect \
> +    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_1 \
> +    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_2 \
> +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_3 \
> +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_5 \
> +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_6 \
> +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_8 \
> +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_9 \
> +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_3 \
> +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_5 \
> +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_6 \
> +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_8 \
> +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_9

I wonder if we could keep this list inside the recipe file itself, similar to
how python3's recipe uses SKIPPED_TESTS with various appends? That example uses
unittest instead of pytest, but it should be possible to pass the list. Maybe
I'm wrong.

Trevor

> diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
> index 887c262ae7..39b6a2602a 100644
> --- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
> +++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
> @@ -7,11 +7,34 @@ LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
>  
>  DEPENDS += "libuv python3-wheel-native"
>  
> -SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
> +SRC_URI += "\
> +    file://0001-setup.cfg-use-system-libuv.patch \
> +    file://run-ptest \
> +"
>  SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
>  
> -inherit pypi python_setuptools_build_meta cython
> +inherit pypi python_setuptools_build_meta cython ptest-python-pytest
>  
>  RDEPENDS:${PN} = "python3-asyncio"
>  
> +RDEPENDS:${PN}-ptest += "\
> +    python3-ctypes \
> +    python3-io \
> +    python3-logging \
> +    python3-math \
> +    python3-multiprocessing \
> +    python3-netclient \
> +    python3-numbers \
> +    python3-pickle \
> +    python3-pprint \
> +    python3-psutil \
> +    python3-pyopenssl \
> +    python3-threading \
> +"
> +
> +do_install_ptest:append() {
> +    # test_sourcecode needs these to skip cleanly when flake8 and mypy are missing
> +    install -m 0644 ${S}/.flake8 ${S}/mypy.ini ${D}${PTEST_PATH}/
> +}
> +
>  BBCLASSEXTEND = "native nativesdk"

Re: [OE-core] [PATCH v2 2/5] python3-uvloop: enable ptest

[Tim Orling]

[-- Attachment #1: Type: text/plain, Size: 8809 bytes --]

On Tue, Nov 3, 2026 at 1:07 PM Trevor Gamblin via openembedded-core
<tgamblin=baylibre.com@lists.openembedded.org> wrote:

> On Tue Nov 3, 2026 at 2:38 PM EST, tim.orling wrote:
> > From: Tim Orling <tim.orling@konsulko.com>
> >
> > The sdist ships the test suite. run-ptest deselects:
> > * tests that conflict with pytest's output capture;
> > * tests broken by libuv 1.53.0 spawning with posix_spawn() on Linux,
> >   which bypasses uvloop's preexec_fn fork hook;
> > * DNS tests that wait for resolver timeouts without network access,
> >   which took the suite from 1 to 10 minutes over tap without NAT;
> > * on riscv64 only, TLS stress tests, the issue39 deadlock check and a
> >   socket cancellation test, whose fixed timeouts are too short for qemu
> >   without KVM.
> >
> > .flake8 and mypy.ini let test_sourcecode skip cleanly when flake8 and
> > mypy are missing.
> >
> > Tested with core-image-ptest-python3-uvloop on qemux86-64. It takes
> > over 30 seconds, so add it to PTESTS_SLOW.
> >
> > AI-Generated: Uses Claude Code (Claude Opus 5.5)
> > Signed-off-by: Tim Orling <tim.orling@konsulko.com>
> > ---
> > Changes in v2:
> > - Skip 13 timing sensitive tests on riscv64 only, covering the
> >   qemuriscv64 AutoBuilder failures plus their counterparts in the other
> >   event loop class and test_socket_cancel_sock_sendall, found in 10 runs
> >   under load (stress-ng)
> > - Build the -k expression in a loop to fix patchtest's line length check
> > - Drop the test counts from the commit message
> >
> >  .../distro/include/ptest-packagelists.inc     |  1 +
> >  .../python/python3-uvloop/run-ptest           | 50 +++++++++++++++++++
> >  .../python/python3-uvloop_0.22.1.bb           | 27 +++++++++-
> >  3 files changed, 76 insertions(+), 2 deletions(-)
> >  create mode 100755 meta/recipes-devtools/python/python3-uvloop/run-ptest
> >
> > diff --git a/meta/conf/distro/include/ptest-packagelists.inc
> b/meta/conf/distro/include/ptest-packagelists.inc
> > index bef45bb4d5..50b971bace 100644
> > --- a/meta/conf/distro/include/ptest-packagelists.inc
> > +++ b/meta/conf/distro/include/ptest-packagelists.inc
> > @@ -154,6 +154,7 @@ PTESTS_SLOW = "\
> >      python3-click \
> >      python3-cryptography \
> >      python3-numpy \
> > +    python3-uvloop \
> >      python3-xmltodict \
> >      strace \
> >      tar \
> > diff --git a/meta/recipes-devtools/python/python3-uvloop/run-ptest
> b/meta/recipes-devtools/python/python3-uvloop/run-ptest
> > new file mode 100755
> > index 0000000000..0cb9a26b88
> > --- /dev/null
> > +++ b/meta/recipes-devtools/python/python3-uvloop/run-ptest
> > @@ -0,0 +1,50 @@
> > +#!/bin/sh
> > +# test_process_streams_redirect: replaces the stdout/stderr fds, which
> > +# conflicts with pytest's output capture.
> > +# test_process_preexec_fn_{1,2}, Test_UV_DNS test_getaddrinfo_{8,9}:
> libuv
> > +# 1.53.0 spawns with posix_spawn(), so preexec_fn never runs, and an
> empty
> > +# host gives EAI_NODATA.
> > +# test_getaddrinfo_{1,2,3,5,6,11}, Test_AIO_DNS test_getaddrinfo_{8,9}:
> each
> > +# DNS lookup waits for the resolver timeout without network access.
> > +# --deselect matches a node id prefix, so -k handles 1, 2 and 11.
> > +# riscv64: qemu runs without KVM there, too slow for the fixed timeouts
> in
> > +# the TLS stress tests, the issue39 deadlock check (signal.alarm(5)) and
> > +# test_socket_cancel_sock_sendall, which must cancel within 0.2s.
> > +SLOW=""
> > +if [ "$(uname -m)" = "riscv64" ]; then
> > +    SLOW="
> > +
> --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_connection_ssl_1
> > +
> --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_server_ssl_over_ssl
> > +        --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_renegotiation
> > +
> --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_connection_ssl_1
> > +
> --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_server_ssl_over_ssl
> > +
> --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_renegotiation
> > +
> --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_connection_ssl_1
> > +
> --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_server_ssl_1
> > +
> --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_connection_ssl_1
> > +
> --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_server_ssl_1
> > +
> --deselect=tests/test_regr1.py::TestIssue39Regr::test_issue39_regression
> > +
> --deselect=tests/test_sockets.py::TestUVSockets::test_socket_cancel_sock_sendall
> > +
> --deselect=tests/test_sockets.py::TestAIOSockets::test_socket_cancel_sock_sendall
> > +    "
> > +fi
> > +KEEP="not (test_getaddrinfo_1 or test_getaddrinfo_2)"
>
> This 'KEEP' variable name seems misleading given that it's using 'not' to
> avoid
> running those two test cases, but then gets built up in a loop. I think
> it'd be
> better to just add them with --deselect like the others, even if it ends up
> being more verbose.
>
> > +for n in 10 12 13 14 15 16 17 18 19 20 21 22; do
> > +    KEEP="$KEEP or test_getaddrinfo_$n"
> > +done
> > +pytest --automake $SLOW \
> > +    -k "$KEEP" \
> > +
> --deselect=tests/test_process.py::Test_UV_Process::test_process_streams_redirect
> \
> > +
> --deselect=tests/test_process.py::Test_AIO_Process::test_process_streams_redirect
> \
> > +
> --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_1
> \
> > +
> --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_2
> \
> > +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_3 \
> > +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_5 \
> > +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_6 \
> > +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_8 \
> > +    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_9 \
> > +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_3 \
> > +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_5 \
> > +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_6 \
> > +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_8 \
> > +    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_9
>
> I wonder if we could keep this list inside the recipe file itself, similar
> to
> how python3's recipe uses SKIPPED_TESTS with various appends? That example
> uses
> unittest instead of pytest, but it should be possible to pass the list.
> Maybe
> I'm wrong.
>

Good points that honestly I was not aware of previously. I am working on a
SKIPPED_TESTS v3.

Thank you for the review!

--Tim


>
> Trevor
>
> > diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
> b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
> > index 887c262ae7..39b6a2602a 100644
> > --- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
> > +++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
> > @@ -7,11 +7,34 @@ LIC_FILES_CHKSUM =
> "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
> >
> >  DEPENDS += "libuv python3-wheel-native"
> >
> > -SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
> > +SRC_URI += "\
> > +    file://0001-setup.cfg-use-system-libuv.patch \
> > +    file://run-ptest \
> > +"
> >  SRC_URI[sha256sum] =
> "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
> >
> > -inherit pypi python_setuptools_build_meta cython
> > +inherit pypi python_setuptools_build_meta cython ptest-python-pytest
> >
> >  RDEPENDS:${PN} = "python3-asyncio"
> >
> > +RDEPENDS:${PN}-ptest += "\
> > +    python3-ctypes \
> > +    python3-io \
> > +    python3-logging \
> > +    python3-math \
> > +    python3-multiprocessing \
> > +    python3-netclient \
> > +    python3-numbers \
> > +    python3-pickle \
> > +    python3-pprint \
> > +    python3-psutil \
> > +    python3-pyopenssl \
> > +    python3-threading \
> > +"
> > +
> > +do_install_ptest:append() {
> > +    # test_sourcecode needs these to skip cleanly when flake8 and mypy
> are missing
> > +    install -m 0644 ${S}/.flake8 ${S}/mypy.ini ${D}${PTEST_PATH}/
> > +}
> > +
> >  BBCLASSEXTEND = "native nativesdk"
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#249298):
> https://lists.openembedded.org/g/openembedded-core/message/249298
> Mute This Topic: https://lists.openembedded.org/mt/122082304/924729
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [
> ticotimo@gmail.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>
>

[-- Attachment #2: Type: text/html, Size: 11486 bytes --]

[PATCH v3 1/5] python3-uvloop: import 0.22.1 from meta-homeassistant

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

uvloop is an asyncio event loop built on libuv. The python3-websockets
test suite exercises it, so bring it into oe-core.

Changes from the meta-homeassistant recipe:
* Build against the oe-core libuv recipe through setup.cfg, instead of
  patching setup.py; drop the Cython pin relaxation, since ~=3.1 already
  allows Cython 3.2.
* LICENSE is "Apache-2.0 OR MIT" (dual-licensed upstream), and the
  vendored libuv licenses are dropped since it is not built.
* Drop aiohttp, psutil and pyopenssl from RDEPENDS; they are only test
  dependencies. Add python3-asyncio.
* Move the maintainer entry to maintainers.inc.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
No changes in v2 or v3.

 meta/conf/distro/include/maintainers.inc      |  1 +
 .../0001-setup.cfg-use-system-libuv.patch     | 21 +++++++++++++++++++
 .../python/python3-uvloop_0.22.1.bb           | 17 +++++++++++++++
 3 files changed, 39 insertions(+)
 create mode 100644 meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
 create mode 100644 meta/recipes-devtools/python/python3-uvloop_0.22.1.bb

diff --git a/meta/conf/distro/include/maintainers.inc b/meta/conf/distro/include/maintainers.inc
index 74db3e44e9..0b2b8c5b8a 100644
--- a/meta/conf/distro/include/maintainers.inc
+++ b/meta/conf/distro/include/maintainers.inc
@@ -750,6 +750,7 @@ RECIPE_MAINTAINER:pn-python3-unittest-automake-output = "Ross Burton <ross.burto
 RECIPE_MAINTAINER:pn-python3-uritools = "Marta Rybczynska <marta.rybczynska@ygreky.com>"
 RECIPE_MAINTAINER:pn-python3-urllib3 = "Tim Orling <tim.orling@konsulko.com>"
 RECIPE_MAINTAINER:pn-python3-uv-build = "Trevor Gamblin <tgamblin@baylibre.com>"
+RECIPE_MAINTAINER:pn-python3-uvloop = "Tim Orling <tim.orling@konsulko.com>"
 RECIPE_MAINTAINER:pn-python3-vcs-versioning = "Trevor Gamblin <tgamblin@baylibre.com>"
 RECIPE_MAINTAINER:pn-python3-vcversioner = "Bruce Ashfield <bruce.ashfield@gmail.com>"
 RECIPE_MAINTAINER:pn-python3-wcwidth = "Tim Orling <tim.orling@konsulko.com>"
diff --git a/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch b/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
new file mode 100644
index 0000000000..d295239b90
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop/0001-setup.cfg-use-system-libuv.patch
@@ -0,0 +1,21 @@
+From: Tim Orling <tim.orling@konsulko.com>
+Subject: [PATCH] setup.cfg: use system libuv
+
+Build against the libuv recipe instead of the bundled copy in
+vendor/libuv.
+
+Upstream-Status: Inappropriate [oe-core specific]
+Signed-off-by: Tim Orling <tim.orling@konsulko.com>
+---
+ setup.cfg | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/setup.cfg
++++ b/setup.cfg
+@@ -1,3 +1,6 @@
++[build_ext]
++use_system_libuv = 1
++
+ [egg_info]
+ tag_build = 
+ tag_date = 0
diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
new file mode 100644
index 0000000000..887c262ae7
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
@@ -0,0 +1,17 @@
+SUMMARY = "Fast implementation of asyncio event loop on top of libuv"
+HOMEPAGE = "https://github.com/MagicStack/uvloop"
+BUGTRACKER = "https://github.com/MagicStack/uvloop/issues"
+LICENSE = "Apache-2.0 OR MIT"
+LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
+                    file://LICENSE-MIT;md5=489c8bc34154e4b59f5c58e664f7d70f"
+
+DEPENDS += "libuv python3-wheel-native"
+
+SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
+SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
+
+inherit pypi python_setuptools_build_meta cython
+
+RDEPENDS:${PN} = "python3-asyncio"
+
+BBCLASSEXTEND = "native nativesdk"
-- 
2.47.3

[PATCH v3 2/5] python3-uvloop: enable ptest

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

The sdist ships the test suite. As in the python3 recipe, the recipe
lists the tests to skip in SKIPPED_TESTS and writes them into run-ptest:
* tests that conflict with pytest's output capture;
* tests broken by libuv 1.53.0 spawning with posix_spawn() on Linux,
  which bypasses uvloop's preexec_fn fork hook;
* DNS tests that wait for resolver timeouts without network access,
  which took the suite from 1 to 10 minutes over tap without NAT;
* on riscv64 only (an override), TLS stress tests, the issue39 deadlock check and a
  socket cancellation test, whose fixed timeouts are too short for qemu
  without KVM.

.flake8 and mypy.ini let test_sourcecode skip cleanly when flake8 and
mypy are missing.

Tested with core-image-ptest-python3-uvloop on qemux86-64 and
qemuriscv64. It takes over 30 seconds, so add it to PTESTS_SLOW.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v3:
- Keep the skip list in the recipe as SKIPPED_TESTS, as python3 does, with
  the riscv64 tests in an override instead of a uname check
- Rename KEEP to DNS_FILTER and explain why -k handles
  test_getaddrinfo_{1,2}

Changes in v2:
- Skip 13 timing sensitive tests on riscv64 only, covering the
  qemuriscv64 AutoBuilder failures plus their counterparts in the other
  event loop class and test_socket_cancel_sock_sendall, found in 10 runs
  under load
- Build the -k expression in a loop to fix patchtest's line length check
- Drop the test counts from the commit message

 .../distro/include/ptest-packagelists.inc     |  1 +
 .../python/python3-uvloop/run-ptest           | 11 +++
 .../python/python3-uvloop_0.22.1.bb           | 78 ++++++++++++++++++-
 3 files changed, 88 insertions(+), 2 deletions(-)
 create mode 100755 meta/recipes-devtools/python/python3-uvloop/run-ptest

diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc
index bef45bb4d5..50b971bace 100644
--- a/meta/conf/distro/include/ptest-packagelists.inc
+++ b/meta/conf/distro/include/ptest-packagelists.inc
@@ -154,6 +154,7 @@ PTESTS_SLOW = "\
     python3-click \
     python3-cryptography \
     python3-numpy \
+    python3-uvloop \
     python3-xmltodict \
     strace \
     tar \
diff --git a/meta/recipes-devtools/python/python3-uvloop/run-ptest b/meta/recipes-devtools/python/python3-uvloop/run-ptest
new file mode 100755
index 0000000000..04716fe101
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-uvloop/run-ptest
@@ -0,0 +1,11 @@
+#!/bin/sh
+# The recipe fills in SKIPPED_TESTS.
+SKIPPED_TESTS=
+# test_getaddrinfo_{1,2} wait for the resolver timeout without network access.
+# --deselect and -k would also drop test_getaddrinfo_1x and _2x, so exclude
+# 1 and 2 with -k and add the rest back.
+DNS_FILTER="not (test_getaddrinfo_1 or test_getaddrinfo_2)"
+for n in 10 11 12 13 14 15 16 17 18 19 20 21 22; do
+    DNS_FILTER="$DNS_FILTER or test_getaddrinfo_$n"
+done
+pytest --automake $SKIPPED_TESTS -k "$DNS_FILTER"
diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
index 887c262ae7..e414f2b470 100644
--- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
+++ b/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
@@ -7,11 +7,85 @@ LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
 
 DEPENDS += "libuv python3-wheel-native"
 
-SRC_URI += "file://0001-setup.cfg-use-system-libuv.patch"
+SRC_URI += "\
+    file://0001-setup.cfg-use-system-libuv.patch \
+    file://run-ptest \
+"
 SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
 
-inherit pypi python_setuptools_build_meta cython
+inherit pypi python_setuptools_build_meta cython ptest-python-pytest
 
 RDEPENDS:${PN} = "python3-asyncio"
 
+RDEPENDS:${PN}-ptest += "\
+    python3-ctypes \
+    python3-io \
+    python3-logging \
+    python3-math \
+    python3-multiprocessing \
+    python3-netclient \
+    python3-numbers \
+    python3-pickle \
+    python3-pprint \
+    python3-psutil \
+    python3-pyopenssl \
+    python3-threading \
+"
+
+# These replace the stdout/stderr fds, which conflicts with pytest's output
+# capture
+SKIPPED_TESTS = "\
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_streams_redirect \
+    --deselect=tests/test_process.py::Test_AIO_Process::test_process_streams_redirect \
+"
+
+# libuv 1.53.0 spawns with posix_spawn(), so preexec_fn never runs, and an
+# empty host gives EAI_NODATA
+SKIPPED_TESTS += "\
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_1 \
+    --deselect=tests/test_process.py::Test_UV_Process::test_process_preexec_fn_2 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_8 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_9 \
+"
+
+# Each DNS lookup waits for the resolver timeout without network access.
+# run-ptest handles test_getaddrinfo_{1,2}.
+SKIPPED_TESTS += "\
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_3 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_5 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_6 \
+    --deselect=tests/test_dns.py::Test_UV_DNS::test_getaddrinfo_11 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_3 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_5 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_6 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_8 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_9 \
+    --deselect=tests/test_dns.py::Test_AIO_DNS::test_getaddrinfo_11 \
+"
+
+# qemu runs without KVM on riscv64, too slow for the fixed timeouts in the TLS
+# stress tests, the issue39 deadlock check (signal.alarm(5)) and
+# test_socket_cancel_sock_sendall, which must cancel within 0.2s
+SKIPPED_TESTS:append:riscv64 = " \
+    --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_connection_ssl_1 \
+    --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_create_server_ssl_over_ssl \
+    --deselect=tests/test_tcp.py::Test_UV_TCPSSL::test_renegotiation \
+    --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_connection_ssl_1 \
+    --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_create_server_ssl_over_ssl \
+    --deselect=tests/test_tcp.py::Test_AIO_TCPSSL::test_renegotiation \
+    --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_connection_ssl_1 \
+    --deselect=tests/test_unix.py::Test_UV_UnixSSL::test_create_unix_server_ssl_1 \
+    --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_connection_ssl_1 \
+    --deselect=tests/test_unix.py::Test_AIO_UnixSSL::test_create_unix_server_ssl_1 \
+    --deselect=tests/test_regr1.py::TestIssue39Regr::test_issue39_regression \
+    --deselect=tests/test_sockets.py::TestUVSockets::test_socket_cancel_sock_sendall \
+    --deselect=tests/test_sockets.py::TestAIOSockets::test_socket_cancel_sock_sendall \
+"
+
+do_install_ptest:append() {
+    # test_sourcecode needs these to skip cleanly when flake8 and mypy are missing
+    install -m 0644 ${S}/.flake8 ${S}/mypy.ini ${D}${PTEST_PATH}/
+    sed -i -e "s|^SKIPPED_TESTS=$|SKIPPED_TESTS=\"${SKIPPED_TESTS}\"|" ${D}${PTEST_PATH}/run-ptest
+}
+
 BBCLASSEXTEND = "native nativesdk"
-- 
2.47.3

[PATCH v3 3/5] python3-uvloop: upgrade 0.22.1 -> 0.23.0

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

Upstream replaced the wheel build dependency with packaging.

https://github.com/MagicStack/uvloop/releases/tag/v0.23.0
https://github.com/MagicStack/uvloop/compare/v0.22.1...v0.23.0

Tested with core-image-ptest-python3-uvloop on qemux86-64 and
qemuriscv64.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v3: none

Changes in v2:
- Drop the test counts from the commit message

 .../{python3-uvloop_0.22.1.bb => python3-uvloop_0.23.0.bb}    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 rename meta/recipes-devtools/python/{python3-uvloop_0.22.1.bb => python3-uvloop_0.23.0.bb} (96%)

diff --git a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb b/meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
similarity index 96%
rename from meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
rename to meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
index e414f2b470..3aa5e2fbe9 100644
--- a/meta/recipes-devtools/python/python3-uvloop_0.22.1.bb
+++ b/meta/recipes-devtools/python/python3-uvloop_0.23.0.bb
@@ -5,13 +5,13 @@ LICENSE = "Apache-2.0 OR MIT"
 LIC_FILES_CHKSUM = "file://LICENSE-APACHE;md5=bb92739ddad0a2811957bd98bdb90474 \
                     file://LICENSE-MIT;md5=489c8bc34154e4b59f5c58e664f7d70f"
 
-DEPENDS += "libuv python3-wheel-native"
+DEPENDS += "libuv python3-packaging-native"
 
 SRC_URI += "\
     file://0001-setup.cfg-use-system-libuv.patch \
     file://run-ptest \
 "
-SRC_URI[sha256sum] = "6c84bae345b9147082b17371e3dd5d42775bddce91f885499017f4607fdaf39f"
+SRC_URI[sha256sum] = "28d160f51ab4da3b187063652e643dea6831072add4adc1e6d62afbe73b6be27"
 
 inherit pypi python_setuptools_build_meta cython ptest-python-pytest
 
-- 
2.47.3

[PATCH v3 4/5] python3-websockets: enable ptest; use git fetcher

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

The PyPI sdist prunes tests/, so fetch the 17.1 tag from git. This
re-enables ptest, reverted in a0488f2e1d when the sdist dropped the tests.

Upstream advises packagers against running the suite because timeout
tests can flake on slow build farms; under ptest it runs on the target,
and it passed repeatedly on qemux86-64.

tests/trio is ignored because python3-trio is not in oe-core.
python3-misc provides tracemalloc for the test utilities. Set
CVE_PRODUCT to the NVD websockets_project:websockets, since the pypi
default no longer applies and never matched.

Tested with core-image-ptest-python3-websockets on qemux86-64. It takes
over 30 seconds, so add it to PTESTS_SLOW.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v3: none

Changes in v2:
- Drop the test counts from the commit message

 meta/conf/distro/include/ptest-packagelists.inc   |  1 +
 .../python/python3-websockets/run-ptest           |  3 +++
 .../python/python3-websockets_17.1.bb             | 15 +++++++++++++--
 3 files changed, 17 insertions(+), 2 deletions(-)
 create mode 100755 meta/recipes-devtools/python/python3-websockets/run-ptest

diff --git a/meta/conf/distro/include/ptest-packagelists.inc b/meta/conf/distro/include/ptest-packagelists.inc
index 50b971bace..7ec75757bc 100644
--- a/meta/conf/distro/include/ptest-packagelists.inc
+++ b/meta/conf/distro/include/ptest-packagelists.inc
@@ -155,6 +155,7 @@ PTESTS_SLOW = "\
     python3-cryptography \
     python3-numpy \
     python3-uvloop \
+    python3-websockets \
     python3-xmltodict \
     strace \
     tar \
diff --git a/meta/recipes-devtools/python/python3-websockets/run-ptest b/meta/recipes-devtools/python/python3-websockets/run-ptest
new file mode 100755
index 0000000000..a71ba0b951
--- /dev/null
+++ b/meta/recipes-devtools/python/python3-websockets/run-ptest
@@ -0,0 +1,3 @@
+#!/bin/sh
+# tests/trio requires python3-trio, which is not in oe-core
+pytest --automake --ignore=tests/trio
diff --git a/meta/recipes-devtools/python/python3-websockets_17.1.bb b/meta/recipes-devtools/python/python3-websockets_17.1.bb
index b5ee3ec661..d1bec373e0 100644
--- a/meta/recipes-devtools/python/python3-websockets_17.1.bb
+++ b/meta/recipes-devtools/python/python3-websockets_17.1.bb
@@ -4,12 +4,23 @@ HOMEPAGE = "https://github.com/aaugustin/websockets"
 LICENSE = "BSD-3-Clause"
 LIC_FILES_CHKSUM = "file://LICENSE;md5=51924a6af4495b8cfaee1b1da869b6f4"
 
-inherit pypi python_setuptools_build_meta
+# The PyPI sdist prunes tests, so fetch from git for ptest
+SRC_URI = "\
+    git://github.com/python-websockets/websockets;branch=main;protocol=https;tag=${PV} \
+    file://run-ptest \
+"
+SRCREV = "e87ea9be0373edd5065b5e94dfa714cfde23023b"
+
+CVE_PRODUCT = "websockets_project:websockets"
 
-SRC_URI[sha256sum] = "acfea4c20bf54384883ea33b1240fc1db4f52e190823a4e2b334bc3e8bfca96a"
+inherit python_setuptools_build_meta ptest-python-pytest
 
 BBCLASSEXTEND = "native nativesdk"
 
 RDEPENDS:${PN} = " \
     python3-asyncio \
 "
+
+RDEPENDS:${PN}-ptest += "\
+    python3-misc \
+"
-- 
2.47.3

[PATCH v3 5/5] python3-websockets: upgrade 17.1 -> 17.4

[tim.orling]

From: Tim Orling <tim.orling@konsulko.com>

17.4 fixes a denial of service by memory exhaustion: recv() now rejects
fragmented messages split into more than 4096 frames (tunable via
WEBSOCKETS_MAX_FRAGMENTS). 17.2 and 17.3 are bug fix releases.

17.3 added uvloop variants of the asyncio tests, so add python3-uvloop
to the ptest dependencies.

https://websockets.readthedocs.io/en/stable/project/changelog.html
https://github.com/python-websockets/websockets/compare/17.1...17.4

Tested with core-image-ptest-python3-websockets on qemux86-64 and
qemuriscv64.

AI-Generated: Uses Claude Code (Claude Opus 5.5)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
---
Changes in v3: none

Changes in v2:
- Drop the test counts from the commit message

 .../{python3-websockets_17.1.bb => python3-websockets_17.4.bb} | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
 rename meta/recipes-devtools/python/{python3-websockets_17.1.bb => python3-websockets_17.4.bb} (89%)

diff --git a/meta/recipes-devtools/python/python3-websockets_17.1.bb b/meta/recipes-devtools/python/python3-websockets_17.4.bb
similarity index 89%
rename from meta/recipes-devtools/python/python3-websockets_17.1.bb
rename to meta/recipes-devtools/python/python3-websockets_17.4.bb
index d1bec373e0..a2357ebee6 100644
--- a/meta/recipes-devtools/python/python3-websockets_17.1.bb
+++ b/meta/recipes-devtools/python/python3-websockets_17.4.bb
@@ -9,7 +9,7 @@ SRC_URI = "\
     git://github.com/python-websockets/websockets;branch=main;protocol=https;tag=${PV} \
     file://run-ptest \
 "
-SRCREV = "e87ea9be0373edd5065b5e94dfa714cfde23023b"
+SRCREV = "625a59ed613ac60e60d577dd64b8641d59ecb2b1"
 
 CVE_PRODUCT = "websockets_project:websockets"
 
@@ -23,4 +23,5 @@ RDEPENDS:${PN} = " \
 
 RDEPENDS:${PN}-ptest += "\
     python3-misc \
+    python3-uvloop \
 "
-- 
2.47.3

Re: [OE-core] [PATCH v2 4/5] python3-websockets: enable ptest; use git fetcher

[Ross Burton]

On 3 Nov 2026, at 19:38, Tim Orling via openembedded-core <tim.orling=konsulko.com@lists.openembedded.org> wrote:
> The PyPI sdist prunes tests/, so fetch the 17.1 tag from git. This
> re-enables ptest, reverted in a0488f2e1d when the sdist dropped the tests.
> 
> Upstream advises packagers against running the suite because timeout
> tests can flake on slow build farms; under ptest it runs on the target,
> and it passed repeatedly on qemux86-64.

Whilst I approve of ptests in general, I think this one will be a cause of pain.

Tests are not shipped in the sdists on purpose[1], and upstream is very clear that the tests are not for packagers[2]:

“”"
If you’re packaging websockets for a distribution, you must use releases published on PyPI as input. You may check SLSA attestations on GitHub.
You mustn’t rely on the git repository as input. Specifically, you mustn’t attempt to run the main test suite. It isn’t treated as a deliverable of the project. It doesn’t do what you think it does. It’s designed for the needs of developers, not packagers.
On a typical build farm for a distribution, tests that exercise timeouts will fail randomly. Indeed, the test suite is optimized for running very fast, with a tolerable level of flakiness, on a high-end laptop without noisy neighbors. This isn’t your context.
“””

This feels like it will be too flaky for the autobuilder, even if we remove tests which have tight timeouts.

Ross

[1] https://github.com/python-websockets/websockets/issues/1739#issuecomment-5016084799
[2] https://websockets.readthedocs.io/en/stable/project/contributing.html#packaging

Re: [OE-core] [PATCH 2/5] python3-uvloop: enable ptest

[Joao Marcos Costa]

Hello, Tim and Mathieu

On 11/2/26 3:10 PM, Mathieu Dubois-Briand via openembedded-core wrote:
(...)
> 
> I can see it tends to fail on riscv.
> 
> First build:
> Failed ptests:
> {'python3-uvloop': ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression',
>                      'tests/test_tcp.py:Test_UV_TCPSSL.test_create_connection_ssl_1',
>                      'tests/test_tcp.py:Test_UV_TCPSSL.test_create_server_ssl_over_ssl',
>                      'tests/test_tcp.py:Test_UV_TCPSSL.test_renegotiation',
>                      'tests/test_tcp.py:Test_AIO_TCPSSL.test_create_connection_ssl_1',
>                      'tests/test_unix.py:Test_UV_UnixSSL.test_create_unix_connection_ssl_1',
>                      'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_connection_ssl_1',
>                      'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_server_ssl_1']}
> https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2713
> 
> Second build:
> Failed ptests:
> {'python3-uvloop': ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression']}
> https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2714
> 
> This is riscv, so emulation is slower than for other architectures.
> Maybe we need to relax a bit some timings.
> 
> Thanks,
> Mathieu

FYI, there was another failure on RISC-V related to another patch in 
this series:

Failed ptests:
{'python3-websockets': 
['tests/asyncio/test_client.py:ClientTests.test_reconnect']}

https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2734/steps/15/logs/stdio

-- 
Best regards,
João Marcos Costa

Re: [OE-core] [PATCH v2 4/5] python3-websockets: enable ptest; use git fetcher

[Tim Orling]

On Thu Nov 5, 2026 at 6:41 AM PST, Ross Burton wrote:
> On 3 Nov 2026, at 19:38, Tim Orling via openembedded-core <tim.orling=konsulko.com@lists.openembedded.org> wrote:
>> The PyPI sdist prunes tests/, so fetch the 17.1 tag from git. This
>> re-enables ptest, reverted in a0488f2e1d when the sdist dropped the tests.
>> 
>> Upstream advises packagers against running the suite because timeout
>> tests can flake on slow build farms; under ptest it runs on the target,
>> and it passed repeatedly on qemux86-64.
>
> Whilst I approve of ptests in general, I think this one will be a cause of pain.
>
> Tests are not shipped in the sdists on purpose[1], and upstream is very clear that the tests are not for packagers[2]:
>
> “”"
> If you’re packaging websockets for a distribution, you must use releases published on PyPI as input. You may check SLSA attestations on GitHub.
> You mustn’t rely on the git repository as input. Specifically, you mustn’t attempt to run the main test suite. It isn’t treated as a deliverable of the project. It doesn’t do what you think it does. It’s designed for the needs of developers, not packagers.
> On a typical build farm for a distribution, tests that exercise timeouts will fail randomly. Indeed, the test suite is optimized for running very fast, with a tolerable level of flakiness, on a high-end laptop without noisy neighbors. This isn’t your context.
> “””
>
> This feels like it will be too flaky for the autobuilder, even if we remove tests which have tight timeouts.

As much as I want ptest to feel comfortable with updates, I cannot deny your conclusions.

I am abandoning this series.

--Tim

>
> Ross
>
> [1] https://github.com/python-websockets/websockets/issues/1739#issuecomment-5016084799
> [2] https://websockets.readthedocs.io/en/stable/project/contributing.html#packaging

Re: [OE-core] [PATCH 2/5] python3-uvloop: enable ptest

[Tim Orling]

On Thu Nov 5, 2026 at 8:54 AM PST, Joao Marcos Costa wrote:
> Hello, Tim and Mathieu
>
> On 11/2/26 3:10 PM, Mathieu Dubois-Briand via openembedded-core wrote:
> (...)
>> 
>> I can see it tends to fail on riscv.
>> 
>> First build:
>> Failed ptests:
>> {'python3-uvloop': ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression',
>>                      'tests/test_tcp.py:Test_UV_TCPSSL.test_create_connection_ssl_1',
>>                      'tests/test_tcp.py:Test_UV_TCPSSL.test_create_server_ssl_over_ssl',
>>                      'tests/test_tcp.py:Test_UV_TCPSSL.test_renegotiation',
>>                      'tests/test_tcp.py:Test_AIO_TCPSSL.test_create_connection_ssl_1',
>>                      'tests/test_unix.py:Test_UV_UnixSSL.test_create_unix_connection_ssl_1',
>>                      'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_connection_ssl_1',
>>                      'tests/test_unix.py:Test_AIO_UnixSSL.test_create_unix_server_ssl_1']}
>> https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2713
>> 
>> Second build:
>> Failed ptests:
>> {'python3-uvloop': ['tests/test_regr1.py:TestIssue39Regr.test_issue39_regression']}
>> https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2714
>> 
>> This is riscv, so emulation is slower than for other architectures.
>> Maybe we need to relax a bit some timings.
>> 
>> Thanks,
>> Mathieu
>
> FYI, there was another failure on RISC-V related to another patch in 
> this series:
>
> Failed ptests:
> {'python3-websockets': 
> ['tests/asyncio/test_client.py:ClientTests.test_reconnect']}

Given the discussion with Ross about abandoning ptest for python3-websockets, there is no
longer a reason to import python3-uvloop, so drop this entire series.

Thank you for the review and feedback.

--Tim
>
> https://autobuilder.yoctoproject.org/valkyrie/#/builders/56/builds/2734/steps/15/logs/stdio