* [U-Boot-Users] [PATCH 04/25] include/configs: Use new CONFIG_CMD_* in sbc* board config files.
@ 2007-07-05 3:30 Jon Loeliger
0 siblings, 0 replies; only message in thread
From: Jon Loeliger @ 2007-07-05 3:30 UTC (permalink / raw)
To: u-boot
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
include/configs/sbc2410x.h | 38 ++++++++++++++------------------
include/configs/sbc405.h | 32 ++++++++++++++-------------
include/configs/sbc8240.h | 29 +++++++++++++------------
include/configs/sbc8260.h | 47 +++++++++++++++++++---------------------
include/configs/sbc8349.h | 51 +++++++++++++++----------------------------
5 files changed, 89 insertions(+), 108 deletions(-)
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
index 866f7b0..fe06be6 100644
--- a/include/configs/sbc2410x.h
+++ b/include/configs/sbc2410x.h
@@ -82,24 +82,20 @@
#define CONFIG_BAUDRATE 115200
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_CACHE | \
- /*CFG_CMD_NAND |*/ \
- /*CFG_CMD_EEPROM |*/ \
- /*CFG_CMD_I2C |*/ \
- /*CFG_CMD_USB |*/ \
- CFG_CMD_REGINFO | \
- CFG_CMD_DATE | \
- CFG_CMD_PING | \
- CFG_CMD_DHCP | \
- CFG_CMD_ELF)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
@@ -110,7 +106,7 @@
/*#define CONFIG_BOOTFILE "elinos-lart" */
#define CONFIG_BOOTCOMMAND "dhcp; bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
/* what's this ? it's not used anywhere */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
@@ -193,7 +189,7 @@
/*-----------------------------------------------------------------------
* NAND flash settings
*/
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
@@ -219,7 +215,7 @@
#define NAND_CTL_CLRCLE(nandptr)
#define NAND_CTL_SETCLE(nandptr)
/* #undef CONFIG_MTD_NAND_VERIFY_WRITE */
-#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
+#endif /* CONFIG_CMD_NAND */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h
index beff28a..af34dbb 100644
--- a/include/configs/sbc405.h
+++ b/include/configs/sbc405.h
@@ -88,19 +88,21 @@
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_SDRAM | \
- 0 )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -123,7 +125,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -229,7 +231,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h
index d891e07..b81858b 100644
--- a/include/configs/sbc8240.h
+++ b/include/configs/sbc8240.h
@@ -79,20 +79,21 @@
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_ENV | \
- CFG_CMD_FLASH | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_SDRAM | \
- 0 )
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+
+/*
+ * Command line configuration.
*/
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
+
/*
* Miscellaneous configurable options
@@ -340,7 +341,7 @@ typedef unsigned int led_id_t;
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 9cf0654..2a209d3 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -444,27 +444,26 @@
*/
#define CONFIG_VERSION_VARIABLE
-/* What U-Boot subsytems do you want enabled? */
-#ifdef CONFIG_ETHER_ON_FCC
-# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IMMAP | \
- CFG_CMD_MII | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM )
-#else
-# define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IMMAP | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM )
-#endif /* CONFIG_ETHER_ON_FCC */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#undef CONFIG_CMD_KGDB
+
+#if defined(CONFIG_ETHER_ON_FCC)
+ #define CONFIG_CMD_CMD_MII
+#endif
+
#undef CONFIG_WATCHDOG /* disable the watchdog */
@@ -481,13 +480,11 @@
#define CONFIG_SBC8260 1 /* on an EST SBC8260 Board */
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -627,7 +624,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index e6e3866..81322df 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -439,40 +439,25 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_PCI \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C) \
- & \
- ~(CFG_CMD_ENV \
- | CFG_CMD_LOADS))
-#endif
-#else
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#if defined(CONFIG_PCI)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PCI \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- )
-#else
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_PING \
- | CFG_CMD_I2C \
- | CFG_CMD_MII \
- )
+ #define CONFG_CMD_PCI
#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
#endif
-#include <cmd_confdefs.h>
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -483,7 +468,7 @@
#define CFG_LOAD_ADDR 0x2000000 /* default load address */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -504,7 +489,7 @@
/* Cache Configuration */
#define CFG_DCACHE_SIZE 32768
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
#endif
@@ -655,7 +640,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
--
1.5.2.2.249.g45fd
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2007-07-05 3:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-07-05 3:30 [U-Boot-Users] [PATCH 04/25] include/configs: Use new CONFIG_CMD_* in sbc* board config files Jon Loeliger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.