All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Paul Parsons" <lost.distance@yahoo.com>
To: <linux-kernel@vger.kernel.org>
Cc: <sameo@linux.intel.com>
Subject: [PATCH 1/2] mfd: Add ASIC3 LED support
Date: Sat, 30 Apr 2011 17:59:25 +0000	[thread overview]
Message-ID: <E1QGERz-0007fX-2a@outmx08.plus.net> (raw)

Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
---
diff -uprN clean-2.6.39-rc5/drivers/mfd/asic3.c linux-2.6.39-rc5/drivers/mfd/asic3.c
--- clean-2.6.39-rc5/drivers/mfd/asic3.c	2011-04-28 11:18:15.622582797 +0100
+++ linux-2.6.39-rc5/drivers/mfd/asic3.c	2011-04-30 15:44:30.288890098 +0100
@@ -88,19 +88,19 @@ struct asic3 {
 
 static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset);
 
-static inline void asic3_write_register(struct asic3 *asic,
-				 unsigned int reg, u32 value)
+void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 value)
 {
 	iowrite16(value, asic->mapping +
 		  (reg >> asic->bus_shift));
 }
+EXPORT_SYMBOL_GPL(asic3_write_register);
 
-static inline u32 asic3_read_register(struct asic3 *asic,
-			       unsigned int reg)
+u32 asic3_read_register(struct asic3 *asic, unsigned int reg)
 {
 	return ioread16(asic->mapping +
 			(reg >> asic->bus_shift));
 }
+EXPORT_SYMBOL_GPL(asic3_read_register);
 
 static void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set)
 {
@@ -584,7 +584,7 @@ static int asic3_gpio_remove(struct plat
 	return gpiochip_remove(&asic->gpio);
 }
 
-static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
+static void asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
 {
 	unsigned long flags;
 	u32 cdex;
@@ -596,8 +596,6 @@ static int asic3_clk_enable(struct asic3
 		asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
 	}
 	spin_unlock_irqrestore(&asic->lock, flags);
-
-	return 0;
 }
 
 static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
@@ -782,7 +780,55 @@ static struct mfd_cell asic3_cell_mmc = 
 	.resources     = asic3_mmc_resources,
 };
 
+static const int clock_ledn[ASIC3_NUM_LEDS] = {
+	[0] = ASIC3_CLOCK_LED0,
+	[1] = ASIC3_CLOCK_LED1,
+	[2] = ASIC3_CLOCK_LED2,
+};
+
+static int asic3_leds_enable(struct platform_device *pdev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	asic3_clk_enable(asic, &asic->clocks[clock_ledn[cell->id]]);
+
+	return 0;
+}
+
+static int asic3_leds_disable(struct platform_device *pdev)
+{
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
+
+	return 0;
+}
+
+static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = {
+	[0] = {
+		.name          = "leds-asic3",
+		.id            = 0,
+		.enable        = asic3_leds_enable,
+		.disable       = asic3_leds_disable,
+	},
+	[1] = {
+		.name          = "leds-asic3",
+		.id            = 1,
+		.enable        = asic3_leds_enable,
+		.disable       = asic3_leds_disable,
+	},
+	[2] = {
+		.name          = "leds-asic3",
+		.id            = 2,
+		.enable        = asic3_leds_enable,
+		.disable       = asic3_leds_disable,
+	},
+};
+
 static int __init asic3_mfd_probe(struct platform_device *pdev,
+				  struct asic3_platform_data *pdata,
 				  struct resource *mem)
 {
 	struct asic3 *asic = platform_get_drvdata(pdev);
@@ -820,9 +866,20 @@ static int __init asic3_mfd_probe(struct
 	if (ret < 0)
 		goto out;
 
-	if (mem_sdio && (irq >= 0))
+	if (mem_sdio && (irq >= 0)) {
 		ret = mfd_add_devices(&pdev->dev, pdev->id,
 			&asic3_cell_mmc, 1, mem_sdio, irq);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (pdata->leds) {
+		asic3_cell_leds[0].mfd_data = &pdata->leds[0];
+		asic3_cell_leds[1].mfd_data = &pdata->leds[1];
+		asic3_cell_leds[2].mfd_data = &pdata->leds[2];
+		ret = mfd_add_devices(&pdev->dev, 0,
+			asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0);
+	}
 
  out:
 	return ret;
@@ -883,6 +940,7 @@ static int __init asic3_probe(struct pla
 		goto out_unmap;
 	}
 
+	asic->gpio.label = "asic3";
 	asic->gpio.base = pdata->gpio_base;
 	asic->gpio.ngpio = ASIC3_NUM_GPIOS;
 	asic->gpio.get = asic3_gpio_get;
@@ -903,7 +961,7 @@ static int __init asic3_probe(struct pla
 	 */
 	memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init));
 
-	asic3_mfd_probe(pdev, mem);
+	asic3_mfd_probe(pdev, pdata, mem);
 
 	dev_info(asic->dev, "ASIC3 Core driver\n");
 
diff -uprN clean-2.6.39-rc5/include/linux/mfd/asic3.h linux-2.6.39-rc5/include/linux/mfd/asic3.h
--- clean-2.6.39-rc5/include/linux/mfd/asic3.h	2011-03-15 01:20:32.000000000 +0000
+++ linux-2.6.39-rc5/include/linux/mfd/asic3.h	2011-04-30 16:06:11.893286349 +0100
@@ -16,6 +16,13 @@
 
 #include <linux/types.h>
 
+struct led_classdev;
+struct asic3_led {
+	const char	*name;
+	const char	*default_trigger;
+	struct led_classdev *cdev;
+};
+
 struct asic3_platform_data {
 	u16 *gpio_config;
 	unsigned int gpio_config_num;
@@ -23,6 +30,8 @@ struct asic3_platform_data {
 	unsigned int irq_base;
 
 	unsigned int gpio_base;
+
+	struct asic3_led *leds;
 };
 
 #define ASIC3_NUM_GPIO_BANKS	4
@@ -111,9 +120,9 @@ struct asic3_platform_data {
 #define ASIC3_GPIOA11_PWM0		ASIC3_CONFIG_GPIO(11, 1, 1, 0)
 #define ASIC3_GPIOA12_PWM1		ASIC3_CONFIG_GPIO(12, 1, 1, 0)
 #define ASIC3_GPIOA15_CONTROL_CX	ASIC3_CONFIG_GPIO(15, 1, 1, 0)
-#define ASIC3_GPIOC0_LED0		ASIC3_CONFIG_GPIO(32, 1, 1, 0)
-#define ASIC3_GPIOC1_LED1		ASIC3_CONFIG_GPIO(33, 1, 1, 0)
-#define ASIC3_GPIOC2_LED2		ASIC3_CONFIG_GPIO(34, 1, 1, 0)
+#define ASIC3_GPIOC0_LED0		ASIC3_CONFIG_GPIO(32, 1, 0, 0)
+#define ASIC3_GPIOC1_LED1		ASIC3_CONFIG_GPIO(33, 1, 0, 0)
+#define ASIC3_GPIOC2_LED2		ASIC3_CONFIG_GPIO(34, 1, 0, 0)
 #define ASIC3_GPIOC3_SPI_RXD		ASIC3_CONFIG_GPIO(35, 1, 0, 0)
 #define ASIC3_GPIOC4_CF_nCD		ASIC3_CONFIG_GPIO(36, 1, 0, 0)
 #define ASIC3_GPIOC4_SPI_TXD		ASIC3_CONFIG_GPIO(36, 1, 1, 0)
@@ -152,6 +161,7 @@ struct asic3_platform_data {
 #define PWM_TIMEBASE_VALUE(x)    ((x)&0xf)   /* Low 4 bits sets time base */
 #define PWM_TIMEBASE_ENABLE     (1 << 4)   /* Enable clock */
 
+#define ASIC3_NUM_LEDS                  3
 #define ASIC3_LED_0_Base                0x0700
 #define ASIC3_LED_1_Base                0x0800
 #define ASIC3_LED_2_Base 		      0x0900
@@ -293,4 +303,10 @@ struct asic3_platform_data {
 #define ASIC3_MAP_SIZE_32BIT	0x2000
 #define ASIC3_MAP_SIZE_16BIT	0x1000
 
+/* Functions needed by leds-asic3 */
+
+struct asic3;
+extern void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 val);
+extern u32 asic3_read_register(struct asic3 *asic, unsigned int reg);
+
 #endif /* __ASIC3_H__ */


             reply	other threads:[~2011-04-30 17:59 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-30 17:59 Paul Parsons [this message]
2011-05-02 15:39 ` [PATCH 1/2] mfd: Add ASIC3 LED support Samuel Ortiz
2011-05-02 22:16   ` Paul Parsons
2011-05-03  8:33     ` Samuel Ortiz
2011-05-03 10:41 ` Philipp Zabel
2011-05-03 10:46   ` Philipp Zabel
2011-05-03 15:38     ` Paul Parsons
2011-05-03 19:46   ` Paul Parsons

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1QGERz-0007fX-2a@outmx08.plus.net \
    --to=lost.distance@yahoo.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.