* [PATCH V2] dtc: Basic integer expressions
@ 2012-03-28 2:24 Stephen Warren
[not found] ` <1332901483-3751-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
0 siblings, 1 reply; 5+ messages in thread
From: Stephen Warren @ 2012-03-28 2:24 UTC (permalink / raw)
To: David Gibson, Jon Loeliger; +Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
Written by David Gibson <david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>. Additions by me:
* Ported to ToT dtc.
* Renamed cell to integer throughout.
* Implemented value range checks.
* Allow L/UL/LL/ULL suffix on literals.
* Enabled the commented test.
Signed-off-by: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
---
v2:
* s/cell/integer/ throughout.
* Allow signed-extended values to pass the overall cell range check.
* Allow L/UL/LL/ULL suffix on literals. This is purely for compatibility
with C, and has no effect on dtc's processing.
* Enabled the 3 disabled tests.
I'm not sure if the literal suffix handling is hacky or not...
dtc-lexer.l | 11 +++-
dtc-parser.y | 131 ++++++++++++++++++++++++++++++++++++++++---
tests/Makefile.tests | 3 +-
tests/integer-expressions.c | 117 ++++++++++++++++++++++++++++++++++++++
tests/run_tests.sh | 5 ++
5 files changed, 256 insertions(+), 11 deletions(-)
create mode 100644 tests/integer-expressions.c
diff --git a/dtc-lexer.l b/dtc-lexer.l
index 73d190c..0dbbbd5 100644
--- a/dtc-lexer.l
+++ b/dtc-lexer.l
@@ -110,7 +110,7 @@ static int pop_input_file(void);
return DT_LABEL;
}
-<V1>[0-9]+|0[xX][0-9a-fA-F]+ {
+<V1>([0-9]+|0[xX][0-9a-fA-F]+)(L|UL|LL|ULL)? {
yylval.literal = xstrdup(yytext);
DPRINT("Literal: '%s'\n", yylval.literal);
return DT_LITERAL;
@@ -164,6 +164,15 @@ static int pop_input_file(void);
<*>{COMMENT}+ /* eat C-style comments */
<*>{LINECOMMENT}+ /* eat C++-style comments */
+<*>"<<" { return DT_LSHIFT; };
+<*>">>" { return DT_RSHIFT; };
+<*>"<=" { return DT_LE; };
+<*>">=" { return DT_GE; };
+<*>"==" { return DT_EQ; };
+<*>"!=" { return DT_NE; };
+<*>"&&" { return DT_AND; };
+<*>"||" { return DT_OR; };
+
<*>. {
DPRINT("Char: %c (\\x%02x)\n", yytext[0],
(unsigned)yytext[0]);
diff --git a/dtc-parser.y b/dtc-parser.y
index 348616b..19db90e 100644
--- a/dtc-parser.y
+++ b/dtc-parser.y
@@ -56,10 +56,12 @@ static unsigned char eval_char_literal(const char *s);
struct node *node;
struct node *nodelist;
struct reserve_info *re;
+ uint64_t integer;
}
%token DT_V1
%token DT_MEMRESERVE
+%token DT_LSHIFT DT_RSHIFT DT_LE DT_GE DT_EQ DT_NE DT_AND DT_OR
%token DT_BITS
%token <propnodename> DT_PROPNODENAME
%token <literal> DT_LITERAL
@@ -86,6 +88,21 @@ static unsigned char eval_char_literal(const char *s);
%type <node> subnode
%type <nodelist> subnodes
+%type <integer> integer_prim
+%type <integer> integer_unary
+%type <integer> integer_mul
+%type <integer> integer_add
+%type <integer> integer_shift
+%type <integer> integer_rela
+%type <integer> integer_eq
+%type <integer> integer_bitand
+%type <integer> integer_bitxor
+%type <integer> integer_bitor
+%type <integer> integer_and
+%type <integer> integer_or
+%type <integer> integer_trinary
+%type <integer> integer_expr
+
%%
sourcefile:
@@ -267,17 +284,17 @@ arrayprefix:
$$.data = empty_data;
$$.bits = 32;
}
- | arrayprefix DT_LITERAL
- {
- uint64_t val = eval_literal($2, 0, $1.bits);
-
- $$.data = data_append_integer($1.data, val, $1.bits);
- }
- | arrayprefix DT_CHAR_LITERAL
+ | arrayprefix integer_prim
{
- uint64_t val = eval_char_literal($2);
+ if ($1.bits < 64) {
+ uint64_t mask = (1ULL << $1.bits) - 1;
+ if (($2 > mask) && (($2 | mask) != -1ULL))
+ print_error(
+ "integer value out of range "
+ "%016lx (%d bits)", $1.bits);
+ }
- $$.data = data_append_integer($1.data, val, $1.bits);
+ $$.data = data_append_integer($1.data, $2, $1.bits);
}
| arrayprefix DT_REF
{
@@ -299,6 +316,95 @@ arrayprefix:
}
;
+integer_prim:
+ DT_LITERAL
+ {
+ $$ = eval_literal($1, 0, 64);
+ }
+ | DT_CHAR_LITERAL
+ {
+ $$ = eval_char_literal($1);
+ }
+ | '(' integer_expr ')'
+ {
+ $$ = $2;
+ }
+ ;
+
+integer_expr:
+ integer_trinary
+ ;
+
+integer_trinary:
+ integer_or
+ | integer_or '?' integer_expr ':' integer_trinary { $$ = $1 ? $3 : $5 }
+ ;
+
+integer_or:
+ integer_and
+ | integer_or DT_OR integer_and { $$ = $1 || $3 };
+ ;
+
+integer_and:
+ integer_bitor
+ | integer_and DT_AND integer_bitor { $$ = $1 && $3 };
+ ;
+
+integer_bitor:
+ integer_bitxor
+ | integer_bitor '|' integer_bitxor { $$ = $1 | $3 };
+ ;
+
+integer_bitxor:
+ integer_bitand
+ | integer_bitxor '^' integer_bitand { $$ = $1 ^ $3 };
+ ;
+
+integer_bitand:
+ integer_eq
+ | integer_bitand '&' integer_eq { $$ = $1 & $3 };
+ ;
+
+integer_eq:
+ integer_rela
+ | integer_eq DT_EQ integer_rela { $$ = $1 == $3; }
+ | integer_eq DT_NE integer_rela { $$ = $1 != $3; }
+ ;
+
+integer_rela:
+ integer_shift
+ | integer_rela '<' integer_shift { $$ = $1 < $3; }
+ | integer_rela '>' integer_shift { $$ = $1 > $3; }
+ | integer_rela DT_LE integer_shift { $$ = $1 <= $3; }
+ | integer_rela DT_GE integer_shift { $$ = $1 >= $3; }
+ ;
+
+integer_shift:
+ integer_shift DT_LSHIFT integer_add { $$ = $1 << $3; }
+ | integer_shift DT_RSHIFT integer_add { $$ = $1 >> $3; }
+ | integer_add
+ ;
+
+integer_add:
+ integer_add '+' integer_mul { $$ = $1 + $3; }
+ | integer_add '-' integer_mul { $$ = $1 - $3; }
+ | integer_mul
+ ;
+
+integer_mul:
+ integer_mul '*' integer_unary { $$ = $1 * $3; }
+ | integer_mul '/' integer_unary { $$ = $1 / $3; }
+ | integer_mul '%' integer_unary { $$ = $1 % $3; }
+ | integer_unary
+ ;
+
+integer_unary:
+ integer_prim
+ | '-' integer_unary { $$ = -$2; }
+ | '~' integer_unary { $$ = ~$2; }
+ | '!' integer_unary { $$ = !$2; }
+ ;
+
bytestring:
/* empty */
{
@@ -364,6 +470,13 @@ static unsigned long long eval_literal(const char *s, int base, int bits)
unsigned long long val;
char *e;
+ e = strchr(s, 'U');
+ if (e)
+ *e = '\0';
+ e = strchr(s, 'L');
+ if (e)
+ *e = '\0';
+
errno = 0;
val = strtoull(s, &e, base);
if (*e)
diff --git a/tests/Makefile.tests b/tests/Makefile.tests
index 2eee708..1795466 100644
--- a/tests/Makefile.tests
+++ b/tests/Makefile.tests
@@ -19,7 +19,8 @@ LIB_TESTS_L = get_mem_rsv \
dtbs_equal_ordered \
dtb_reverse dtbs_equal_unordered \
add_subnode_with_nops path_offset_aliases \
- utilfdt_test
+ utilfdt_test \
+ integer-expressions
LIB_TESTS = $(LIB_TESTS_L:%=$(TESTS_PREFIX)%)
LIBTREE_TESTS_L = truncated_property
diff --git a/tests/integer-expressions.c b/tests/integer-expressions.c
new file mode 100644
index 0000000..d778f02
--- /dev/null
+++ b/tests/integer-expressions.c
@@ -0,0 +1,117 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Testcase for dtc expression support
+ * Copyright (C) 2008 David Gibson, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1 of
+ * the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "tests.h"
+#include "testdata.h"
+
+struct test_expr {
+ const char *expr;
+ uint32_t result;
+} expr_table[] = {
+#define TE(expr) { #expr, (expr) }
+ TE(0xdeadbeef),
+ TE(-0x21524111),
+ TE(1+1),
+ TE(2*3),
+ TE(4/2),
+ TE(10/3),
+ TE(19%4),
+ TE(1 << 13),
+ TE(0x1000 >> 4),
+ TE(3*2+1), TE(3*(2+1)),
+ TE(1+2*3), TE((1+2)*3),
+ TE(1 < 2), TE(2 < 1), TE(1 < 1),
+ TE(1 <= 2), TE(2 <= 1), TE(1 <= 1),
+ TE(1 > 2), TE(2 > 1), TE(1 > 1),
+ TE(1 >= 2), TE(2 >= 1), TE(1 >= 1),
+ TE(1 == 1), TE(1 == 2),
+ TE(1 != 1), TE(1 != 2),
+ TE(0xabcdabcd & 0xffff0000),
+ TE(0xdead4110 ^ 0xf0f0f0f0),
+ TE(0xabcd0000 | 0x0000abcd),
+ TE(~0x21524110),
+ TE(~~0xdeadbeef),
+ TE(0 && 0), TE(17 && 0), TE(0 && 17), TE(17 && 17),
+ TE(0 || 0), TE(17 || 0), TE(0 || 17), TE(17 || 17),
+ TE(!0), TE(!1), TE(!17), TE(!!0), TE(!!17),
+ TE(0 ? 17 : 39), TE(1 ? 17 : 39), TE(17 ? 0xdeadbeef : 0xabcd1234),
+ TE(11 * 257 * 1321517ULL),
+ TE(123456790 - 4/2 + 17%4),
+};
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+int main(int argc, char *argv[])
+{
+ void *fdt;
+ const uint32_t *res;
+ int reslen;
+ int i;
+
+ test_init(argc, argv);
+
+ if ((argc == 3) && (strcmp(argv[1], "-g") == 0)) {
+ FILE *f = fopen(argv[2], "w");
+
+ if (!f)
+ FAIL("Couldn't open \"%s\" for output: %s\n",
+ argv[2], strerror(errno));
+
+ fprintf(f, "/dts-v1/;\n");
+ fprintf(f, "/ {\n");
+ fprintf(f, "\texpressions = <\n");
+ for (i = 0; i < ARRAY_SIZE(expr_table); i++)
+ fprintf(f, "\t\t(%s)\n", expr_table[i].expr);
+ fprintf(f, "\t>;\n");
+ fprintf(f, "};\n");
+ fclose(f);
+ } else {
+ fdt = load_blob_arg(argc, argv);
+
+ res = fdt_getprop(fdt, 0, "expressions", &reslen);
+
+ if (!res)
+ FAIL("Error retreiving expression results: %s\n",
+ fdt_strerror(reslen));
+
+ if (reslen != (ARRAY_SIZE(expr_table) * sizeof(uint32_t)))
+ FAIL("Unexpected length of results %d instead of %ld\n",
+ reslen, ARRAY_SIZE(expr_table) * sizeof(uint32_t));
+
+ for (i = 0; i < ARRAY_SIZE(expr_table); i++)
+ if (fdt32_to_cpu(res[i]) != expr_table[i].result)
+ FAIL("Incorrect result for expression \"%s\","
+ " 0x%x instead of 0x%x\n",
+ expr_table[i].expr, fdt32_to_cpu(res[i]),
+ expr_table[i].result);
+ }
+
+ PASS();
+}
diff --git a/tests/run_tests.sh b/tests/run_tests.sh
index e470b82..ab8133c 100755
--- a/tests/run_tests.sh
+++ b/tests/run_tests.sh
@@ -404,6 +404,11 @@ dtc_tests () {
run_dtc_test -I dtb -O dts -o stdin_odts_test_tree1.dtb.test.dts - < test_tree1.dtb
run_wrap_test cmp stdin_odts_test_tree1.dtb.test.dts odts_test_tree1.dtb.test.dts
+ # Check integer expresisons
+ run_test integer-expressions -g integer-expressions.test.dts
+ run_dtc_test -I dts -O dtb -o integer-expressions.test.dtb integer-expressions.test.dts
+ run_test integer-expressions integer-expressions.test.dtb
+
# Check for graceful failure in some error conditions
run_sh_test dtc-fatal.sh -I dts -O dtb nosuchfile.dts
run_sh_test dtc-fatal.sh -I dtb -O dtb nosuchfile.dtb
--
1.7.5.4
^ permalink raw reply related [flat|nested] 5+ messages in thread[parent not found: <1332901483-3751-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>]
* Re: [PATCH V2] dtc: Basic integer expressions [not found] ` <1332901483-3751-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> @ 2012-03-31 14:24 ` Jon Loeliger [not found] ` <E1SDzDw-0003C1-Ag-CYoMK+44s/E@public.gmane.org> 2012-04-04 0:04 ` David Gibson 1 sibling, 1 reply; 5+ messages in thread From: Jon Loeliger @ 2012-03-31 14:24 UTC (permalink / raw) To: Stephen Warren; +Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ > Written by David Gibson <david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>. Additions by me: > * Ported to ToT dtc. > * Renamed cell to integer throughout. > * Implemented value range checks. > * Allow L/UL/LL/ULL suffix on literals. > * Enabled the commented test. > > Signed-off-by: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> > --- > v2: > * s/cell/integer/ throughout. > * Allow signed-extended values to pass the overall cell range check. > * Allow L/UL/LL/ULL suffix on literals. This is purely for compatibility > with C, and has no effect on dtc's processing. > * Enabled the 3 disabled tests. > > I'm not sure if the literal suffix handling is hacky or not... I get this too: CC tests/integer-expressions.o cc1: warnings being treated as errors tests/integer-expressions.c: In function 'main' tests/integer-expressions.c:105: error: format tests/integer-expressions.o cc1: warnings being treated as errors tests/integer-expressions.c:105: error: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' make: *** [tests/integer-expressions.o] Error 1 $ gcc --version gcc (Debian 4.4.5-8) 4.4.5 jdl ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <E1SDzDw-0003C1-Ag-CYoMK+44s/E@public.gmane.org>]
* Re: [PATCH V2] dtc: Basic integer expressions [not found] ` <E1SDzDw-0003C1-Ag-CYoMK+44s/E@public.gmane.org> @ 2012-04-02 16:16 ` Stephen Warren [not found] ` <4F79D0DB.9010500-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 0 siblings, 1 reply; 5+ messages in thread From: Stephen Warren @ 2012-04-02 16:16 UTC (permalink / raw) To: Jon Loeliger; +Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ On 03/31/2012 08:24 AM, Jon Loeliger wrote: >> Written by David Gibson <david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>. Additions by me: >> * Ported to ToT dtc. >> * Renamed cell to integer throughout. >> * Implemented value range checks. >> * Allow L/UL/LL/ULL suffix on literals. >> * Enabled the commented test. >> >> Signed-off-by: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> >> --- >> v2: >> * s/cell/integer/ throughout. >> * Allow signed-extended values to pass the overall cell range check. >> * Allow L/UL/LL/ULL suffix on literals. This is purely for compatibility >> with C, and has no effect on dtc's processing. >> * Enabled the 3 disabled tests. >> >> I'm not sure if the literal suffix handling is hacky or not... > > I get this too: > > CC tests/integer-expressions.o > cc1: warnings being treated as errors > tests/integer-expressions.c: In function 'main' > tests/integer-expressions.c:105: error: format tests/integer-expressions.o > cc1: warnings being treated as errors > tests/integer-expressions.c:105: error: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' > make: *** [tests/integer-expressions.o] Error 1 > > $ gcc --version > gcc (Debian 4.4.5-8) 4.4.5 I assume this is a 32-bit system? I guess I can use <inttypes.h> to solve this if needed. ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <4F79D0DB.9010500-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>]
* Re: [PATCH V2] dtc: Basic integer expressions [not found] ` <4F79D0DB.9010500-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> @ 2012-04-03 23:12 ` David Gibson 0 siblings, 0 replies; 5+ messages in thread From: David Gibson @ 2012-04-03 23:12 UTC (permalink / raw) To: Stephen Warren; +Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ On Mon, Apr 02, 2012 at 10:16:27AM -0600, Stephen Warren wrote: > On 03/31/2012 08:24 AM, Jon Loeliger wrote: > >> Written by David Gibson <david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>. Additions by me: > >> * Ported to ToT dtc. > >> * Renamed cell to integer throughout. > >> * Implemented value range checks. > >> * Allow L/UL/LL/ULL suffix on literals. > >> * Enabled the commented test. > >> > >> Signed-off-by: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> > >> --- > >> v2: > >> * s/cell/integer/ throughout. > >> * Allow signed-extended values to pass the overall cell range check. > >> * Allow L/UL/LL/ULL suffix on literals. This is purely for compatibility > >> with C, and has no effect on dtc's processing. > >> * Enabled the 3 disabled tests. > >> > >> I'm not sure if the literal suffix handling is hacky or not... > > > > I get this too: > > > > CC tests/integer-expressions.o > > cc1: warnings being treated as errors > > tests/integer-expressions.c: In function 'main' > > tests/integer-expressions.c:105: error: format tests/integer-expressions.o > > cc1: warnings being treated as errors > > tests/integer-expressions.c:105: error: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' > > make: *** [tests/integer-expressions.o] Error 1 > > > > $ gcc --version > > gcc (Debian 4.4.5-8) 4.4.5 > > I assume this is a 32-bit system? I guess I can use <inttypes.h> to > solve this if needed. The expression in question is based on sizeof() so has type size_t. So %zd should do the trick. -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH V2] dtc: Basic integer expressions [not found] ` <1332901483-3751-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 2012-03-31 14:24 ` Jon Loeliger @ 2012-04-04 0:04 ` David Gibson 1 sibling, 0 replies; 5+ messages in thread From: David Gibson @ 2012-04-04 0:04 UTC (permalink / raw) To: Stephen Warren; +Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ On Tue, Mar 27, 2012 at 08:24:43PM -0600, Stephen Warren wrote: > Written by David Gibson <david-xT8FGy+AXnRB3Ne2BGzF6laj5H9X9Tb+@public.gmane.org>. Additions by me: > * Ported to ToT dtc. > * Renamed cell to integer throughout. > * Implemented value range checks. > * Allow L/UL/LL/ULL suffix on literals. > * Enabled the commented test. > > Signed-off-by: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> > --- > v2: > * s/cell/integer/ throughout. > * Allow signed-extended values to pass the overall cell range check. > * Allow L/UL/LL/ULL suffix on literals. This is purely for compatibility > with C, and has no effect on dtc's processing. > * Enabled the 3 disabled tests. > > I'm not sure if the literal suffix handling is hacky or not... > > dtc-lexer.l | 11 +++- > dtc-parser.y | 131 ++++++++++++++++++++++++++++++++++++++++--- > tests/Makefile.tests | 3 +- > tests/integer-expressions.c | 117 ++++++++++++++++++++++++++++++++++++++ > tests/run_tests.sh | 5 ++ > 5 files changed, 256 insertions(+), 11 deletions(-) > create mode 100644 tests/integer-expressions.c > > diff --git a/dtc-lexer.l b/dtc-lexer.l > index 73d190c..0dbbbd5 100644 > --- a/dtc-lexer.l > +++ b/dtc-lexer.l > @@ -110,7 +110,7 @@ static int pop_input_file(void); > return DT_LABEL; > } > > -<V1>[0-9]+|0[xX][0-9a-fA-F]+ { > +<V1>([0-9]+|0[xX][0-9a-fA-F]+)(L|UL|LL|ULL)? { Should include 'U' here as well. > yylval.literal = xstrdup(yytext); > DPRINT("Literal: '%s'\n", yylval.literal); > return DT_LITERAL; > @@ -164,6 +164,15 @@ static int pop_input_file(void); > <*>{COMMENT}+ /* eat C-style comments */ > <*>{LINECOMMENT}+ /* eat C++-style comments */ > > +<*>"<<" { return DT_LSHIFT; }; > +<*>">>" { return DT_RSHIFT; }; > +<*>"<=" { return DT_LE; }; > +<*>">=" { return DT_GE; }; > +<*>"==" { return DT_EQ; }; > +<*>"!=" { return DT_NE; }; > +<*>"&&" { return DT_AND; }; > +<*>"||" { return DT_OR; }; > + > <*>. { > DPRINT("Char: %c (\\x%02x)\n", yytext[0], > (unsigned)yytext[0]); > diff --git a/dtc-parser.y b/dtc-parser.y > index 348616b..19db90e 100644 > --- a/dtc-parser.y > +++ b/dtc-parser.y > @@ -56,10 +56,12 @@ static unsigned char eval_char_literal(const char *s); > struct node *node; > struct node *nodelist; > struct reserve_info *re; > + uint64_t integer; > } > > %token DT_V1 > %token DT_MEMRESERVE > +%token DT_LSHIFT DT_RSHIFT DT_LE DT_GE DT_EQ DT_NE DT_AND DT_OR > %token DT_BITS > %token <propnodename> DT_PROPNODENAME > %token <literal> DT_LITERAL > @@ -86,6 +88,21 @@ static unsigned char eval_char_literal(const char *s); > %type <node> subnode > %type <nodelist> subnodes > > +%type <integer> integer_prim > +%type <integer> integer_unary > +%type <integer> integer_mul > +%type <integer> integer_add > +%type <integer> integer_shift > +%type <integer> integer_rela > +%type <integer> integer_eq > +%type <integer> integer_bitand > +%type <integer> integer_bitxor > +%type <integer> integer_bitor > +%type <integer> integer_and > +%type <integer> integer_or > +%type <integer> integer_trinary > +%type <integer> integer_expr > + > %% > > sourcefile: > @@ -267,17 +284,17 @@ arrayprefix: > $$.data = empty_data; > $$.bits = 32; > } > - | arrayprefix DT_LITERAL > - { > - uint64_t val = eval_literal($2, 0, $1.bits); > - > - $$.data = data_append_integer($1.data, val, $1.bits); > - } > - | arrayprefix DT_CHAR_LITERAL > + | arrayprefix integer_prim Here is good, but you can also allow expressions in /memreserve/ lines. > { > - uint64_t val = eval_char_literal($2); > + if ($1.bits < 64) { > + uint64_t mask = (1ULL << $1.bits) - 1; > + if (($2 > mask) && (($2 | mask) != -1ULL)) Hrm. That condition isn't the most instantly understandable. > + print_error( > + "integer value out of range " > + "%016lx (%d bits)", $1.bits); > + } > > - $$.data = data_append_integer($1.data, val, $1.bits); > + $$.data = data_append_integer($1.data, $2, $1.bits); > } > | arrayprefix DT_REF > { > @@ -299,6 +316,95 @@ arrayprefix: > } > ; > > +integer_prim: > + DT_LITERAL > + { > + $$ = eval_literal($1, 0, 64); > + } > + | DT_CHAR_LITERAL > + { > + $$ = eval_char_literal($1); > + } > + | '(' integer_expr ')' > + { > + $$ = $2; > + } > + ; > + > +integer_expr: > + integer_trinary > + ; > + > +integer_trinary: > + integer_or > + | integer_or '?' integer_expr ':' integer_trinary { $$ = $1 ? $3 : $5 } Missing a ; at the end of the statement, likewise in a whole bunch of the following pieces. I guess it works for you, by accident of where ;s happen to appear in the bison template, but for me at least, bison spews a whole bunch of warnings about this. > + ; > + > +integer_or: > + integer_and > + | integer_or DT_OR integer_and { $$ = $1 || $3 }; > + ; > + > +integer_and: > + integer_bitor > + | integer_and DT_AND integer_bitor { $$ = $1 && $3 }; > + ; > + > +integer_bitor: > + integer_bitxor > + | integer_bitor '|' integer_bitxor { $$ = $1 | $3 }; > + ; > + > +integer_bitxor: > + integer_bitand > + | integer_bitxor '^' integer_bitand { $$ = $1 ^ $3 }; > + ; > + > +integer_bitand: > + integer_eq > + | integer_bitand '&' integer_eq { $$ = $1 & $3 }; > + ; > + > +integer_eq: > + integer_rela > + | integer_eq DT_EQ integer_rela { $$ = $1 == $3; } > + | integer_eq DT_NE integer_rela { $$ = $1 != $3; } > + ; > + > +integer_rela: > + integer_shift > + | integer_rela '<' integer_shift { $$ = $1 < $3; } > + | integer_rela '>' integer_shift { $$ = $1 > $3; } > + | integer_rela DT_LE integer_shift { $$ = $1 <= $3; } > + | integer_rela DT_GE integer_shift { $$ = $1 >= $3; } > + ; > + > +integer_shift: > + integer_shift DT_LSHIFT integer_add { $$ = $1 << $3; } > + | integer_shift DT_RSHIFT integer_add { $$ = $1 >> $3; } > + | integer_add > + ; > + > +integer_add: > + integer_add '+' integer_mul { $$ = $1 + $3; } > + | integer_add '-' integer_mul { $$ = $1 - $3; } > + | integer_mul > + ; > + > +integer_mul: > + integer_mul '*' integer_unary { $$ = $1 * $3; } > + | integer_mul '/' integer_unary { $$ = $1 / $3; } > + | integer_mul '%' integer_unary { $$ = $1 % $3; } > + | integer_unary > + ; > + > +integer_unary: > + integer_prim > + | '-' integer_unary { $$ = -$2; } > + | '~' integer_unary { $$ = ~$2; } > + | '!' integer_unary { $$ = !$2; } > + ; > + > bytestring: > /* empty */ > { > @@ -364,6 +470,13 @@ static unsigned long long eval_literal(const char *s, int base, int bits) > unsigned long long val; > char *e; > > + e = strchr(s, 'U'); > + if (e) > + *e = '\0'; > + e = strchr(s, 'L'); > + if (e) > + *e = '\0'; > + Hrm. This makes some assumptions about the format of the given string that are true given the grammar, but I'd prefer not to make here. Better, I think to handle the suffixes with a strspn() in the if (*e) clause below. > errno = 0; > val = strtoull(s, &e, base); > if (*e) > diff --git a/tests/Makefile.tests b/tests/Makefile.tests > index 2eee708..1795466 100644 > --- a/tests/Makefile.tests > +++ b/tests/Makefile.tests > @@ -19,7 +19,8 @@ LIB_TESTS_L = get_mem_rsv \ > dtbs_equal_ordered \ > dtb_reverse dtbs_equal_unordered \ > add_subnode_with_nops path_offset_aliases \ > - utilfdt_test > + utilfdt_test \ > + integer-expressions > LIB_TESTS = $(LIB_TESTS_L:%=$(TESTS_PREFIX)%) > > LIBTREE_TESTS_L = truncated_property > diff --git a/tests/integer-expressions.c b/tests/integer-expressions.c > new file mode 100644 > index 0000000..d778f02 > --- /dev/null > +++ b/tests/integer-expressions.c > @@ -0,0 +1,117 @@ > +/* > + * libfdt - Flat Device Tree manipulation Not really part of libfdt > + * Testcase for dtc expression support > + * Copyright (C) 2008 David Gibson, IBM Corporation. > + * > + * This library is free software; you can redistribute it and/or > + * modify it under the terms of the GNU Lesser General Public License > + * as published by the Free Software Foundation; either version 2.1 of > + * the License, or (at your option) any later version. > + * > + * This library is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * Lesser General Public License for more details. > + * > + * You should have received a copy of the GNU Lesser General Public > + * License along with this library; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA > + */ > + > +#include <stdlib.h> > +#include <stdio.h> > +#include <string.h> > +#include <stdint.h> > +#include <errno.h> > + > + > +#include <fdt.h> > +#include <libfdt.h> > + > +#include "tests.h" > +#include "testdata.h" > + > +struct test_expr { > + const char *expr; > + uint32_t result; > +} expr_table[] = { > +#define TE(expr) { #expr, (expr) } > + TE(0xdeadbeef), > + TE(-0x21524111), > + TE(1+1), > + TE(2*3), > + TE(4/2), > + TE(10/3), > + TE(19%4), > + TE(1 << 13), > + TE(0x1000 >> 4), > + TE(3*2+1), TE(3*(2+1)), > + TE(1+2*3), TE((1+2)*3), > + TE(1 < 2), TE(2 < 1), TE(1 < 1), > + TE(1 <= 2), TE(2 <= 1), TE(1 <= 1), > + TE(1 > 2), TE(2 > 1), TE(1 > 1), > + TE(1 >= 2), TE(2 >= 1), TE(1 >= 1), > + TE(1 == 1), TE(1 == 2), > + TE(1 != 1), TE(1 != 2), > + TE(0xabcdabcd & 0xffff0000), > + TE(0xdead4110 ^ 0xf0f0f0f0), > + TE(0xabcd0000 | 0x0000abcd), > + TE(~0x21524110), > + TE(~~0xdeadbeef), > + TE(0 && 0), TE(17 && 0), TE(0 && 17), TE(17 && 17), > + TE(0 || 0), TE(17 || 0), TE(0 || 17), TE(17 || 17), > + TE(!0), TE(!1), TE(!17), TE(!!0), TE(!!17), > + TE(0 ? 17 : 39), TE(1 ? 17 : 39), TE(17 ? 0xdeadbeef : 0xabcd1234), > + TE(11 * 257 * 1321517ULL), > + TE(123456790 - 4/2 + 17%4), > +}; > + > +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) > + > +int main(int argc, char *argv[]) > +{ > + void *fdt; > + const uint32_t *res; > + int reslen; > + int i; > + > + test_init(argc, argv); > + > + if ((argc == 3) && (strcmp(argv[1], "-g") == 0)) { > + FILE *f = fopen(argv[2], "w"); > + > + if (!f) > + FAIL("Couldn't open \"%s\" for output: %s\n", > + argv[2], strerror(errno)); > + > + fprintf(f, "/dts-v1/;\n"); > + fprintf(f, "/ {\n"); > + fprintf(f, "\texpressions = <\n"); > + for (i = 0; i < ARRAY_SIZE(expr_table); i++) > + fprintf(f, "\t\t(%s)\n", expr_table[i].expr); > + fprintf(f, "\t>;\n"); > + fprintf(f, "};\n"); > + fclose(f); > + } else { > + fdt = load_blob_arg(argc, argv); > + > + res = fdt_getprop(fdt, 0, "expressions", &reslen); > + > + if (!res) > + FAIL("Error retreiving expression results: %s\n", > + fdt_strerror(reslen)); > + > + if (reslen != (ARRAY_SIZE(expr_table) * sizeof(uint32_t))) > + FAIL("Unexpected length of results %d instead of %ld\n", > + reslen, ARRAY_SIZE(expr_table) * sizeof(uint32_t)); > + > + for (i = 0; i < ARRAY_SIZE(expr_table); i++) > + if (fdt32_to_cpu(res[i]) != expr_table[i].result) > + FAIL("Incorrect result for expression \"%s\"," > + " 0x%x instead of 0x%x\n", > + expr_table[i].expr, fdt32_to_cpu(res[i]), > + expr_table[i].result); > + } > + > + PASS(); > +} > diff --git a/tests/run_tests.sh b/tests/run_tests.sh > index e470b82..ab8133c 100755 > --- a/tests/run_tests.sh > +++ b/tests/run_tests.sh > @@ -404,6 +404,11 @@ dtc_tests () { > run_dtc_test -I dtb -O dts -o stdin_odts_test_tree1.dtb.test.dts - < test_tree1.dtb > run_wrap_test cmp stdin_odts_test_tree1.dtb.test.dts odts_test_tree1.dtb.test.dts > > + # Check integer expresisons > + run_test integer-expressions -g integer-expressions.test.dts > + run_dtc_test -I dts -O dtb -o integer-expressions.test.dtb integer-expressions.test.dts > + run_test integer-expressions integer-expressions.test.dtb > + > # Check for graceful failure in some error conditions > run_sh_test dtc-fatal.sh -I dts -O dtb nosuchfile.dts > run_sh_test dtc-fatal.sh -I dtb -O dtb nosuchfile.dtb -- David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-04-04 0:04 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-28 2:24 [PATCH V2] dtc: Basic integer expressions Stephen Warren
[not found] ` <1332901483-3751-1-git-send-email-swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-03-31 14:24 ` Jon Loeliger
[not found] ` <E1SDzDw-0003C1-Ag-CYoMK+44s/E@public.gmane.org>
2012-04-02 16:16 ` Stephen Warren
[not found] ` <4F79D0DB.9010500-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2012-04-03 23:12 ` David Gibson
2012-04-04 0:04 ` David Gibson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.