All of lore.kernel.org
 help / color / mirror / Atom feed
From: Russell King <rmk+kernel@arm.linux.org.uk>
To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Wim Van Sebroeck <wim@iguana.be>,
	linux-arm-kernel@lists.infradead.org,
	linux-watchdog@vger.kernel.org
Subject: [PATCH 1/2] Watchdog: allow orion_wdt to be built for Dove
Date: Tue, 18 Jun 2013 17:19:32 +0100	[thread overview]
Message-ID: <E1Uoyd2-0001Cp-KL@rmk-PC.arm.linux.org.uk> (raw)

The watchdog infrastructure in Dove is no different from that in
Orion5x or Kirkwood, so let's enable it for Dove.  The only things
missing are a few register settings in Dove's bridge-regs.h.

Rather than duplicating the same register bit masks for the RSTOUTn_MASK
and BRIDGE_CAUSE registers, move the definitions into the watchdog
driver itself.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-dove/include/mach/bridge-regs.h     |    1 +
 arch/arm/mach-kirkwood/include/mach/bridge-regs.h |    2 --
 arch/arm/mach-orion5x/include/mach/bridge-regs.h  |    3 ---
 drivers/watchdog/Kconfig                          |    2 +-
 drivers/watchdog/orion_wdt.c                      |    3 +++
 5 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 99f259e..5362df3 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -26,6 +26,7 @@
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define  SOFT_RESET		0x00000001
 
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
 #define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 5c82b7d..95a4c87 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -20,14 +20,12 @@
 #define CPU_RESET		0x00000002
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
-#define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
-#define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 461fd69..f727d03 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -18,7 +18,6 @@
 #define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE + 0x104)
 
 #define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x108)
-#define WDT_RESET_OUT_EN	0x0002
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE + 0x10c)
 
@@ -26,8 +25,6 @@
 
 #define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE + 0x11C)
 
-#define WDT_INT_REQ		0x0008
-
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x200)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index e89fc31..c077ae9 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -291,7 +291,7 @@ config DAVINCI_WATCHDOG
 
 config ORION_WATCHDOG
 	tristate "Orion watchdog"
-	depends on ARCH_ORION5X || ARCH_KIRKWOOD
+	depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE
 	select WATCHDOG_CORE
 	help
 	  Say Y here if to include support for the watchdog timer
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index da57798..4074244 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -38,6 +38,9 @@
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
 
+#define WDT_RESET_OUT_EN	BIT(1)
+#define WDT_INT_REQ		BIT(3)
+
 static bool nowayout = WATCHDOG_NOWAYOUT;
 static int heartbeat = -1;		/* module parameter (seconds) */
 static unsigned int wdt_max_duration;	/* (seconds) */
-- 
1.7.4.4


WARNING: multiple messages have this Message-ID (diff)
From: rmk+kernel@arm.linux.org.uk (Russell King)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] Watchdog: allow orion_wdt to be built for Dove
Date: Tue, 18 Jun 2013 17:19:32 +0100	[thread overview]
Message-ID: <E1Uoyd2-0001Cp-KL@rmk-PC.arm.linux.org.uk> (raw)

The watchdog infrastructure in Dove is no different from that in
Orion5x or Kirkwood, so let's enable it for Dove.  The only things
missing are a few register settings in Dove's bridge-regs.h.

Rather than duplicating the same register bit masks for the RSTOUTn_MASK
and BRIDGE_CAUSE registers, move the definitions into the watchdog
driver itself.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-dove/include/mach/bridge-regs.h     |    1 +
 arch/arm/mach-kirkwood/include/mach/bridge-regs.h |    2 --
 arch/arm/mach-orion5x/include/mach/bridge-regs.h  |    3 ---
 drivers/watchdog/Kconfig                          |    2 +-
 drivers/watchdog/orion_wdt.c                      |    3 +++
 5 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
index 99f259e..5362df3 100644
--- a/arch/arm/mach-dove/include/mach/bridge-regs.h
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -26,6 +26,7 @@
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define  SOFT_RESET		0x00000001
 
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
 #define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 5c82b7d..95a4c87 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -20,14 +20,12 @@
 #define CPU_RESET		0x00000002
 
 #define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
-#define WDT_RESET_OUT_EN	0x00000002
 #define SOFT_RESET_OUT_EN	0x00000004
 
 #define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
 #define SOFT_RESET		0x00000001
 
 #define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE + 0x0110)
-#define WDT_INT_REQ		0x0008
 
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
index 461fd69..f727d03 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h
@@ -18,7 +18,6 @@
 #define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE + 0x104)
 
 #define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x108)
-#define WDT_RESET_OUT_EN	0x0002
 
 #define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE + 0x10c)
 
@@ -26,8 +25,6 @@
 
 #define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE + 0x11C)
 
-#define WDT_INT_REQ		0x0008
-
 #define BRIDGE_INT_TIMER1_CLR	(~0x0004)
 
 #define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x200)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index e89fc31..c077ae9 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -291,7 +291,7 @@ config DAVINCI_WATCHDOG
 
 config ORION_WATCHDOG
 	tristate "Orion watchdog"
-	depends on ARCH_ORION5X || ARCH_KIRKWOOD
+	depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE
 	select WATCHDOG_CORE
 	help
 	  Say Y here if to include support for the watchdog timer
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index da57798..4074244 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -38,6 +38,9 @@
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
 
+#define WDT_RESET_OUT_EN	BIT(1)
+#define WDT_INT_REQ		BIT(3)
+
 static bool nowayout = WATCHDOG_NOWAYOUT;
 static int heartbeat = -1;		/* module parameter (seconds) */
 static unsigned int wdt_max_duration;	/* (seconds) */
-- 
1.7.4.4

             reply	other threads:[~2013-06-18 16:22 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-18 16:19 Russell King [this message]
2013-06-18 16:19 ` [PATCH 1/2] Watchdog: allow orion_wdt to be built for Dove Russell King
2013-06-18 16:31 ` Jason Cooper
2013-06-18 16:31   ` Jason Cooper
2013-06-18 18:36   ` Sebastian Hesselbarth
2013-06-18 18:36     ` Sebastian Hesselbarth
2013-06-18 18:54     ` Russell King - ARM Linux
2013-06-18 18:54       ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1Uoyd2-0001Cp-KL@rmk-PC.arm.linux.org.uk \
    --to=rmk+kernel@arm.linux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.