From: rmk+kernel@armlinux.org.uk (Russell King)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC 11/12] drm/i2c: tda998x: remove complexity from tda998x_audio_get_eld()
Date: Tue, 08 Nov 2016 12:25:52 +0000 [thread overview]
Message-ID: <E1c45TM-0005kN-UB@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20161108122420.GP1041@n2100.armlinux.org.uk>
tda998x_audio_get_eld() is needlessly complex - the connector associated
with the encoder is always our own priv->connector. Remove this
complexity, but ensure that there are no races when copying out the ELD.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index b1ad5ed5d645..226871e34442 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -910,21 +910,13 @@ static int tda998x_audio_get_eld(struct device *dev, void *data,
uint8_t *buf, size_t len)
{
struct tda998x_priv *priv = dev_get_drvdata(dev);
- struct drm_mode_config *config = &priv->encoder.dev->mode_config;
- struct drm_connector *connector;
- int ret = -ENODEV;
-
- mutex_lock(&config->mutex);
- list_for_each_entry(connector, &config->connector_list, head) {
- if (&priv->encoder == connector->encoder) {
- memcpy(buf, connector->eld,
- min(sizeof(connector->eld), len));
- ret = 0;
- }
- }
- mutex_unlock(&config->mutex);
- return ret;
+ mutex_lock(&priv->audio_mutex);
+ memcpy(buf, priv->connector.eld,
+ min(sizeof(priv->connector.eld), len));
+ mutex_unlock(&priv->audio_mutex);
+
+ return 0;
}
static const struct hdmi_codec_ops audio_codec_ops = {
@@ -975,6 +967,7 @@ static int tda998x_connector_fill_modes(struct drm_connector *connector,
struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
int ret;
+ mutex_lock(&priv->audio_mutex);
ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
if (connector->edid_blob_ptr) {
@@ -984,6 +977,7 @@ static int tda998x_connector_fill_modes(struct drm_connector *connector,
} else {
priv->sink_has_audio = false;
}
+ mutex_unlock(&priv->audio_mutex);
return ret;
}
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Russell King <rmk+kernel@armlinux.org.uk>
To: Brian Starkey <brian.starkey@arm.com>,
Liviu Dudau <Liviu.Dudau@arm.com>, Jyri Sarha <jsarha@ti.com>
Cc: linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org
Subject: [PATCH RFC 11/12] drm/i2c: tda998x: remove complexity from tda998x_audio_get_eld()
Date: Tue, 08 Nov 2016 12:25:52 +0000 [thread overview]
Message-ID: <E1c45TM-0005kN-UB@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20161108122420.GP1041@n2100.armlinux.org.uk>
tda998x_audio_get_eld() is needlessly complex - the connector associated
with the encoder is always our own priv->connector. Remove this
complexity, but ensure that there are no races when copying out the ELD.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/gpu/drm/i2c/tda998x_drv.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index b1ad5ed5d645..226871e34442 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -910,21 +910,13 @@ static int tda998x_audio_get_eld(struct device *dev, void *data,
uint8_t *buf, size_t len)
{
struct tda998x_priv *priv = dev_get_drvdata(dev);
- struct drm_mode_config *config = &priv->encoder.dev->mode_config;
- struct drm_connector *connector;
- int ret = -ENODEV;
-
- mutex_lock(&config->mutex);
- list_for_each_entry(connector, &config->connector_list, head) {
- if (&priv->encoder == connector->encoder) {
- memcpy(buf, connector->eld,
- min(sizeof(connector->eld), len));
- ret = 0;
- }
- }
- mutex_unlock(&config->mutex);
- return ret;
+ mutex_lock(&priv->audio_mutex);
+ memcpy(buf, priv->connector.eld,
+ min(sizeof(priv->connector.eld), len));
+ mutex_unlock(&priv->audio_mutex);
+
+ return 0;
}
static const struct hdmi_codec_ops audio_codec_ops = {
@@ -975,6 +967,7 @@ static int tda998x_connector_fill_modes(struct drm_connector *connector,
struct tda998x_priv *priv = conn_to_tda998x_priv(connector);
int ret;
+ mutex_lock(&priv->audio_mutex);
ret = drm_helper_probe_single_connector_modes(connector, maxX, maxY);
if (connector->edid_blob_ptr) {
@@ -984,6 +977,7 @@ static int tda998x_connector_fill_modes(struct drm_connector *connector,
} else {
priv->sink_has_audio = false;
}
+ mutex_unlock(&priv->audio_mutex);
return ret;
}
--
2.7.4
next prev parent reply other threads:[~2016-11-08 12:25 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-08 12:24 [PATCH RFC 00/12] tda998x updates Russell King - ARM Linux
2016-11-08 12:24 ` Russell King - ARM Linux
2016-11-08 12:25 ` [PATCH RFC 01/12] drm/i2c: tda998x: avoid race in tda998x_encoder_mode_set() Russell King
2016-11-08 12:25 ` Russell King
2016-11-18 0:01 ` Russell King - ARM Linux
2016-11-18 0:01 ` Russell King - ARM Linux
2016-11-08 12:25 ` [PATCH RFC 02/12] drm/i2c: tda998x: avoid racy access to mode clock Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 03/12] drm/i2c: tda998x: avoid race when programming audio Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 04/12] drm/i2c: tda998x: only configure infoframes and audio if supported Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 05/12] drm/i2c: tda998x: only enable audio if supported by sink Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 06/12] drm/i2c: tda998x: correct function name in comments Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 07/12] drm/i2c: tda998x: move and rename tda998x_encoder_set_config() Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 08/12] drm/i2c: tda998x: group connector functions and funcs together Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 09/12] drm/i2c: tda998x: separate connector initialisation Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` [PATCH RFC 10/12] drm/i2c: tda998x: group audio functions together Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 12:25 ` Russell King [this message]
2016-11-08 12:25 ` [PATCH RFC 11/12] drm/i2c: tda998x: remove complexity from tda998x_audio_get_eld() Russell King
2016-11-08 12:25 ` [PATCH RFC 12/12] drm/i2c: tda998x: switch to boolean is_on Russell King
2016-11-08 12:25 ` Russell King
2016-11-08 13:19 ` [PATCH RFC 00/12] tda998x updates Robin Murphy
2016-11-08 13:19 ` Robin Murphy
2016-11-08 13:32 ` Russell King - ARM Linux
2016-11-08 13:32 ` Russell King - ARM Linux
2016-11-08 13:34 ` Russell King - ARM Linux
2016-11-08 13:34 ` Russell King - ARM Linux
2016-11-08 15:25 ` Robin Murphy
2016-11-08 15:25 ` Robin Murphy
2016-11-08 15:42 ` Russell King - ARM Linux
2016-11-08 15:42 ` Russell King - ARM Linux
2016-11-08 17:20 ` Jon Medhurst (Tixy)
2016-11-08 17:20 ` Jon Medhurst (Tixy)
2016-11-08 18:24 ` Russell King - ARM Linux
2016-11-08 18:24 ` Russell King - ARM Linux
2016-11-09 11:45 ` Jon Medhurst (Tixy)
2016-11-09 11:45 ` Jon Medhurst (Tixy)
2016-11-09 22:14 ` Russell King - ARM Linux
2016-11-09 22:14 ` Russell King - ARM Linux
2016-11-11 15:10 ` Jyri Sarha
2016-11-11 15:10 ` Jyri Sarha
2016-11-11 15:27 ` Russell King - ARM Linux
2016-11-11 15:27 ` Russell King - ARM Linux
2016-11-11 16:24 ` Jyri Sarha
2016-11-11 16:24 ` Jyri Sarha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1c45TM-0005kN-UB@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.