All of lore.kernel.org
 help / color / mirror / Atom feed
From: Russell King <rmk+kernel@armlinux.org.uk>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Sascha Hauer <s.hauer@pengutronix.de>,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: dts: imx6-sr-som: add ethernet PHY configuration
Date: Wed, 15 Apr 2020 16:44:17 +0100	[thread overview]
Message-ID: <E1jOkD3-00067R-RZ@rmk-PC.armlinux.org.uk> (raw)

Add ethernet PHY configuration ahead of removing the quirk that
configures the clocking mode for the PHY.  The RGMII delay is
already set correctly.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
This patch depends on b1f4c209d840 ("net: phy: at803x: fix clock
sink configuration on ATH8030 and ATH8035") which has been
recently merged.

 arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 6d7f6b9035bc..b06577808ff4 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,10 +53,21 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-handle = <&phy>;
 	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &iomuxc {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Russell King <rmk+kernel@armlinux.org.uk>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH] arm: dts: imx6-sr-som: add ethernet PHY configuration
Date: Wed, 15 Apr 2020 16:44:17 +0100	[thread overview]
Message-ID: <E1jOkD3-00067R-RZ@rmk-PC.armlinux.org.uk> (raw)

Add ethernet PHY configuration ahead of removing the quirk that
configures the clocking mode for the PHY.  The RGMII delay is
already set correctly.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
This patch depends on b1f4c209d840 ("net: phy: at803x: fix clock
sink configuration on ATH8030 and ATH8035") which has been
recently merged.

 arch/arm/boot/dts/imx6qdl-sr-som.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 6d7f6b9035bc..b06577808ff4 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,10 +53,21 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-handle = <&phy>;
 	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &iomuxc {
-- 
2.20.1


             reply	other threads:[~2020-04-15 15:44 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-15 15:44 Russell King [this message]
2020-04-15 15:44 ` [PATCH] arm: dts: imx6-sr-som: add ethernet PHY configuration Russell King
2020-04-15 19:26 ` Fabio Estevam
2020-04-15 19:26   ` Fabio Estevam
2020-04-29  2:44 ` Shawn Guo
2020-04-29  2:44   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1jOkD3-00067R-RZ@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=mark.rutland@arm.com \
    --cc=o.rempel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.