[PATCH net-next 02/10] net: stmmac: convert plat->phylink_node to fwnode

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Feiyang Chen <chenfeiyang@loongson.cn>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net-next 02/10] net: stmmac: convert plat->phylink_node to fwnode
Date: Thu, 24 Aug 2023 14:37:58 +0100	[thread overview]
Message-ID: <E1qZAX8-005pTo-OT@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <ZOddFH22PWmOmbT5@shell.armlinux.org.uk>

All users of plat->phylink_node first convert it to a fwnode. Rather
than repeatedly convert to a fwnode, store it as a fwnode. To reflect
this change, call it plat->port_node instead - it is used for more
than just phylink.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 4 ++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c     | 3 ++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +-
 include/linux/stmmac.h                                | 2 +-
 4 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7a9bbcf03ea5..a2dfb624e10c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1153,7 +1153,7 @@ static int stmmac_init_phy(struct net_device *dev)
 	if (!phylink_expects_phy(priv->phylink))
 		return 0;
 
-	fwnode = of_fwnode_handle(priv->plat->phylink_node);
+	fwnode = priv->plat->port_node;
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
 
@@ -1200,7 +1200,7 @@ static int stmmac_init_phy(struct net_device *dev)
 static int stmmac_phy_setup(struct stmmac_priv *priv)
 {
 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
-	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
+	struct fwnode_handle *fwnode = priv->plat->port_node;
 	int max_speed = priv->plat->max_speed;
 	int mode = priv->plat->phy_interface;
 	struct phylink *phylink;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index dd9e2fec5328..fa9e7e7040b9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -533,11 +533,11 @@ int stmmac_mdio_register(struct net_device *ndev)
 	int err = 0;
 	struct mii_bus *new_bus;
 	struct stmmac_priv *priv = netdev_priv(ndev);
-	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
 	struct device_node *mdio_node = priv->plat->mdio_node;
 	struct device *dev = ndev->dev.parent;
 	struct fwnode_handle *fixed_node;
+	struct fwnode_handle *fwnode;
 	int addr, found, max_addr;
 
 	if (!mdio_bus_data)
@@ -601,6 +601,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 		stmmac_xgmac2_mdio_read_c45(new_bus, 0, 0, 0);
 
 	/* If fixed-link is set, skip PHY scanning */
+	fwnode = priv->plat->port_node;
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index be8e79c7aa34..ff330423ee66 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -428,7 +428,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
 
 	/* PHYLINK automatically parses the phy-handle property */
-	plat->phylink_node = np;
+	plat->port_node = of_fwnode_handle(np);
 
 	/* Get max speed of operation from device tree */
 	of_property_read_u32(np, "max-speed", &plat->max_speed);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 784277d666eb..b2ccd827bb80 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -227,7 +227,7 @@ struct plat_stmmacenet_data {
 	phy_interface_t phy_interface;
 	struct stmmac_mdio_bus_data *mdio_bus_data;
 	struct device_node *phy_node;
-	struct device_node *phylink_node;
+	struct fwnode_handle *port_node;
 	struct device_node *mdio_node;
 	struct stmmac_dma_cfg *dma_cfg;
 	struct stmmac_est *est;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
