All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Alexei Starovoitov <ast@kernel.org>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	bpf@vger.kernel.org, Daniel Borkmann <daniel@iogearbox.net>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Jesper Dangaard Brouer <hawk@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org,
	Paolo Abeni <pabeni@redhat.com>,
	Stanislav Fomichev <sdf@fomichev.me>
Subject: [PATCH net-next 09/15] net: stmmac: add helper to set receive buffer size
Date: Wed, 11 Mar 2026 09:52:50 +0000	[thread overview]
Message-ID: <E1w0GFG-0000000CiTP-1EJi@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <abE7LWj04-JNxgS2@shell.armlinux.org.uk>

There are three sites that configure the hardware for the receive
buffer size using the same logic to determine the buffer size.
Add a helper so there is only one copy of this code.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 54 ++++++++-----------
 1 file changed, 21 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 787b02c2607a..47b536c15c0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -393,6 +393,24 @@ static void stmmac_set_queue_rx_tail_ptr(struct stmmac_priv *priv,
 	stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_tail_addr, chan);
 }
 
+static void stmmac_set_queue_rx_buf_size(struct stmmac_priv *priv,
+					 struct stmmac_rx_queue *rx_q,
+					 unsigned int chan)
+{
+	u32 buf_size;
+
+	if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
+		buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
+		stmmac_set_dma_bfsize(priv, priv->ioaddr,
+				      buf_size,
+				      rx_q->queue_index);
+	} else {
+		stmmac_set_dma_bfsize(priv, priv->ioaddr,
+				      priv->dma_conf.dma_buf_sz,
+				      rx_q->queue_index);
+	}
+}
+
 /**
  * stmmac_rx_dirty - Get RX queue dirty
  * @priv: driver private structure
@@ -2605,23 +2623,13 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 	/* configure all channels */
 	for (chan = 0; chan < rx_channels_count; chan++) {
 		struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[chan];
-		u32 buf_size;
 
 		qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
 
 		stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
 				rxfifosz, qmode);
 
-		if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
-			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      buf_size,
-					      chan);
-		} else {
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      priv->dma_conf.dma_buf_sz,
-					      chan);
-		}
+		stmmac_set_queue_rx_buf_size(priv, rx_q, chan);
 	}
 
 	for (chan = 0; chan < tx_channels_count; chan++) {
@@ -6935,7 +6943,6 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
 	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 	struct stmmac_channel *ch = &priv->channel[queue];
 	unsigned long flags;
-	u32 buf_size;
 	int ret;
 
 	ret = __alloc_dma_rx_desc_resources(priv, &priv->dma_conf, queue);
@@ -6960,16 +6967,7 @@ void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
 	stmmac_set_queue_rx_tail_ptr(priv, rx_q, rx_q->queue_index,
 				     rx_q->buf_alloc_num);
 
-	if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
-		buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
-		stmmac_set_dma_bfsize(priv, priv->ioaddr,
-				      buf_size,
-				      rx_q->queue_index);
-	} else {
-		stmmac_set_dma_bfsize(priv, priv->ioaddr,
-				      priv->dma_conf.dma_buf_sz,
-				      rx_q->queue_index);
-	}
+	stmmac_set_queue_rx_buf_size(priv, rx_q, rx_q->queue_index);
 
 	stmmac_start_rx_dma(priv, queue);
 
@@ -7072,7 +7070,6 @@ int stmmac_xdp_open(struct net_device *dev)
 	u8 dma_csr_ch = max(rx_cnt, tx_cnt);
 	struct stmmac_rx_queue *rx_q;
 	struct stmmac_tx_queue *tx_q;
-	u32 buf_size;
 	bool sph_en;
 	u8 chan;
 	int ret;
@@ -7112,16 +7109,7 @@ int stmmac_xdp_open(struct net_device *dev)
 		stmmac_set_queue_rx_tail_ptr(priv, rx_q, chan,
 					     rx_q->buf_alloc_num);
 
-		if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
-			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      buf_size,
-					      rx_q->queue_index);
-		} else {
-			stmmac_set_dma_bfsize(priv, priv->ioaddr,
-					      priv->dma_conf.dma_buf_sz,
-					      rx_q->queue_index);
-		}
+		stmmac_set_queue_rx_buf_size(priv, rx_q, chan);
 
 		stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
 	}
-- 
2.47.3


  parent reply	other threads:[~2026-03-11  9:53 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-11  9:51 [PATCH net-next 00/15] net: stmmac: clean up descriptor handling part 1 Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 01/15] net: stmmac: rearrange stmmac_tx_info members to pack better Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 02/15] net: stmmac: helpers for filling tx_q->tx_skbuff_dma Russell King (Oracle)
2026-03-11 14:57   ` Andrew Lunn
2026-03-11 14:59     ` Russell King (Oracle)
2026-03-12  8:54   ` Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 03/15] net: stmmac: clean up stmmac_clear_rx_descriptors() Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 04/15] net: stmmac: add helper to get hardware receive descriptor Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 05/15] net: stmmac: add helper to get size of a " Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 06/15] net: stmmac: add helper to set receive tail pointer Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 07/15] net: stmmac: remove rx_tail_addr Russell King (Oracle)
2026-03-11  9:52 ` [PATCH net-next 08/15] net: stmmac: use consistent tests for receive buffer size Russell King (Oracle)
2026-03-11  9:52 ` Russell King (Oracle) [this message]
2026-03-11  9:52 ` [PATCH net-next 10/15] net: stmmac: simplify stmmac_set_queue_rx_buf_size() Russell King (Oracle)
2026-03-11  9:53 ` [PATCH net-next 11/15] net: stmmac: add helper to get hardware transmit descriptor Russell King (Oracle)
2026-03-11  9:53 ` [PATCH net-next 12/15] net: stmmac: add helper to get size of a " Russell King (Oracle)
2026-03-11  9:53 ` [PATCH net-next 13/15] net: stmmac: add helper to set transmit tail pointer Russell King (Oracle)
2026-03-11  9:53 ` [PATCH net-next 14/15] net: stmmac: remove tx_tail_addr Russell King (Oracle)
2026-03-11  9:53 ` [PATCH net-next 15/15] net: stmmac: use queue rather than ->queue_index Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1w0GFG-0000000CiTP-1EJi@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hawk@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sdf@fomichev.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.