(no subject)

[Schmid Alexander]

Hello,
I use U-Boot 1.2.0 on MPC5200B. Console over serial works fine. I have a
Grafic controller at LPB Bus and U-Boot shows his console output at VGa too.
But I would need a keyboard. I compiled U-Boot with USB and if i type "usb
reset" the ohci controller scans the USB devices and finds a keyboard. But
nothing happens if i push the buttons on the keyboard!
Can anyone help me please?
Thanks




Alexander Schmid
Dipl. Ing. (FH)
-Entwicklung-
Systeme & Steuerungen GmbH
Josef-Buchinger-Strasse 8
DE-94481 Grafenau


Amtsgericht Passau; HRB-Nr.: 1248
Geschäftsführer: Wolfgang Biewald


Tel.:  +49 85 52 96 39 37
Fax.:    +49 85 52 96 39 40
Email:  a.schmid@systeme-steuerungen.de


Der Inhalt dieser E-Mail ist vertraulich. Wenn Sie nicht der berechtigte
Empfänger sind, bitten wir Sie, uns umgehend zu informieren und den Inhalt
weder für eigene Zwecke zu nutzen noch an Dritte weiterzugeben.

This e-mail is confidential. If you are not the intended recipient, please
notify us immediately. You should not disclose its contents to any other
person nor use it for any purposes.

Re:

[Wolfgang Denk]

Dear Alexander,

In message <FCELKENEBBOLLHKPHCCBEECMCDAA.a.schmid@systeme-steuerungen.de> you wrote:
> 
> I use U-Boot 1.2.0 on MPC5200B. Console over serial works fine. I have a

U-Boot related questions are off topic here. Please post such
questions on the U-Boot mailing list, see
http://lists.denx.de/mailman/listinfo/u-boot

Second, U-Boot 1.2.0 is *very* old, please use recent code (1.3.4 or
later).

> Grafic controller at LPB Bus and U-Boot shows his console output at VGa too.
> But I would need a keyboard. I compiled U-Boot with USB and if i type "usb
> reset" the ohci controller scans the USB devices and finds a keyboard. But
> nothing happens if i push the buttons on the keyboard!

There is no USB keyboard driver in U-Boot yet. Please let me know if
you need help to develop one.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Time is fluid ... like a river with currents, eddies, backwash.
	-- Spock, "The City on the Edge of Forever", stardate 3134.0