From: "Stefan Dösinger" <stefandoesinger@gmail.com>
To: linux-arm-kernel@lists.infradead.org,
Navid Ghahremani <ghahramani.navid@gmail.com>
Cc: arnd@arndb.de, krzk@kernel.org,
Navid Ghahremani <ghahramani.navid@gmail.com>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org
Subject: Re: [PATCH v2 08/24] gpio: Add ZTE ZX279128S GPIO driver
Date: Wed, 14 Oct 2026 23:11:40 +0200 [thread overview]
Message-ID: <PSg3JObRTl2eiB9vIwNJDQ@gmail.com> (raw)
In-Reply-To: <20261014072109.1759502-9-ghahramani.navid@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 665 bytes --]
Am Mittwoch, 14. Oktober 2026, 09:20:48 Mitteleuropäische Sommerzeit schrieb
Navid Ghahremani:
> + * Each bank has 16 lines, one bit per line in each register. The registers
> + * at 0x04-0x10 and 0x28-0x34 control the interrupts, which are not
> supported + * yet.
> + */
> +#define ZX279128S_GPIO_DIR 0x00 /* 1: output */
> +#define ZX279128S_GPIO_DATA 0x14 /* line level */
> +#define ZX279128S_GPIO_SET 0x18 /* write 1: drive high */
> +#define ZX279128S_GPIO_CLEAR 0x1c /* write 1: drive low */
Fyi, there is also Documentation/devicetree/bindings/gpio/gpio-mmio.yaml,
which allows you to put this directly into the DTS without a driver shim.
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 870 bytes --]
next prev parent reply other threads:[~2026-10-14 21:11 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-14 7:20 [PATCH v2 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 01/24] MAINTAINERS: Consolidate ARM/ZTE ZX SOC SUPPORT with Stefan Doesinger Navid Ghahremani
2026-10-14 20:11 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 02/24] dt-bindings: arm: Add ZTE ZX279128S platform descriptions Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 03/24] ARM: zte: Add ZX279128S platform and CPU hotplug support Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 04/24] dt-bindings: clock: Add ZTE ZX279128S CRM clock bindings Navid Ghahremani
2026-10-14 21:48 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 05/24] dt-bindings: reset: Add ZTE ZX279128S reset controller bindings Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 06/24] clk: zte: Add ZX279128S CRM clock and reset driver Navid Ghahremani
2026-10-14 13:21 ` Philipp Zabel
2026-10-14 19:39 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 07/24] dt-bindings: gpio: Add ZTE ZX279128S GPIO controller Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 08/24] gpio: Add ZTE ZX279128S GPIO driver Navid Ghahremani
2026-10-14 21:11 ` Stefan Dösinger [this message]
2026-10-14 7:20 ` [PATCH v2 09/24] dt-bindings: pinctrl: pinctrl-single: Add ZTE ZX279128S pin mux Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 10/24] dt-bindings: phy: Add ZTE ZX279128S PCIe PHY binding Navid Ghahremani
2026-10-14 7:20 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 11/24] phy: zte: Add ZTE ZX279128S PCIe PHY driver Navid Ghahremani
2026-10-14 7:20 ` Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 13/24] PCI: dwc: Add ZTE ZX279128S host controller driver Navid Ghahremani
2026-10-14 13:19 ` Bjorn Helgaas
2026-10-14 21:06 ` Stefan Dösinger
2026-10-14 7:20 ` [PATCH v2 14/24] dt-bindings: net: Add ZTE ZX279128S MDIO controller Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 15/24] net: mdio: " Navid Ghahremani
2026-10-14 12:13 ` Andrew Lunn
2026-10-14 7:20 ` [PATCH v2 16/24] net: phy: Add Sanechips ZX5201 PHY support Navid Ghahremani
2026-10-14 12:37 ` Andrew Lunn
2026-10-14 7:20 ` [PATCH v2 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 18/24] net: ethernet: zte: Add ZX279128S Ethernet switch driver Navid Ghahremani
2026-10-14 7:20 ` [PATCH v2 19/24] dt-bindings: spi: Add ZTE ZX family SPI flash controller binding Navid Ghahremani
2026-10-14 20:33 ` Stefan Dösinger
2026-10-14 7:21 ` [PATCH v2 20/24] spi: zx: Add ZTE ZX family SPI flash controller driver Navid Ghahremani
2026-10-14 19:28 ` Stefan Dösinger
2026-10-14 7:21 ` [PATCH v2 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 23/24] ARM: dts: zte: Add ZX279128S SoC description Navid Ghahremani
2026-10-14 7:21 ` [PATCH v2 24/24] ARM: dts: zte: Add ZTE ZXHN H3600 board Navid Ghahremani
2026-10-14 12:52 ` Andrew Lunn
2026-10-14 20:00 ` [PATCH v2 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Stefan Dösinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PSg3JObRTl2eiB9vIwNJDQ@gmail.com \
--to=stefandoesinger@gmail.com \
--cc=arnd@arndb.de \
--cc=brgl@kernel.org \
--cc=ghahramani.navid@gmail.com \
--cc=krzk@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.