From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: Ezequiel Garcia <ezequiel@collabora.com>
Cc: devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-rockchip@lists.infradead.org,
Jacob Chen <jacob-chen@iotwrt.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH 5/5] media: hantro: Add support for the Rockchip PX30
Date: Fri, 8 Jan 2021 10:05:16 +0100 [thread overview]
Message-ID: <X/ggTOOTBhGoFDpW@aptenodytes> (raw)
In-Reply-To: <f7291b83fe39d71c3192ea58ebf71e3909bd38af.camel@collabora.com>
[-- Attachment #1.1: Type: text/plain, Size: 6312 bytes --]
Hi Ezequiel,
On Thu 07 Jan 21, 16:08, Ezequiel Garcia wrote:
> Happy to see this patch. It was on my TODO list,
> but I hadn't had time to bringup my rk3326 device.
Same here, I just had an occasion to use it again these days so I jumped
on it!
> A few comments.
>
> On Thu, 2021-01-07 at 14:41 +0100, Paul Kocialkowski wrote:
> > The PX30 SoC includes both the VDPU2 and VEPU2 blocks which are similar
> > to the RK3399 (Hantro G1/H1 with shuffled registers).
> >
> > Besides taking an extra clock, it also shares an interrupt with the IOMMU
> > so it's necessary to request the interrupt shared.
> >
>
> Could you clarify on the commit description which iommu device interrupt
> line is being shared?
Sure! It's IRQ 79 of the GIC that's shared with vopl_mmu.
It's not very obvious in the dt commit.
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> > drivers/staging/media/hantro/hantro_drv.c | 5 +++--
> > drivers/staging/media/hantro/hantro_hw.h | 1 +
> > drivers/staging/media/hantro/rk3399_vpu_hw.c | 21 ++++++++++++++++++++
> > 3 files changed, 25 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > index e5f200e64993..076a7782b476 100644
> > --- a/drivers/staging/media/hantro/hantro_drv.c
> > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > @@ -472,6 +472,7 @@ static const struct v4l2_file_operations hantro_fops = {
> >
> > static const struct of_device_id of_hantro_match[] = {
> > #ifdef CONFIG_VIDEO_HANTRO_ROCKCHIP
> > + { .compatible = "rockchip,px30-vpu", .data = &px30_vpu_variant, },
> > { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
> > { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
> > { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
> > @@ -796,8 +797,8 @@ static int hantro_probe(struct platform_device *pdev)
> > return -ENXIO;
> >
> > ret = devm_request_irq(vpu->dev, irq,
> > - vpu->variant->irqs[i].handler, 0,
> > - dev_name(vpu->dev), vpu);
> > + vpu->variant->irqs[i].handler,
> > + IRQF_SHARED, dev_name(vpu->dev), vpu);
>
> Maybe this irq flag should be part of vpu->variant? It sounds like an IP block
> integration specific thing.
Ah right, I agree that it would be justified. But it would also be simple to
just fix the irq handlers and assume this can generally be the case, because it
feels like a bit of a detail to justify a flag.
Do you think this could be a safe/workable assumption?
> Also, you will need a px30-specific interrupt handler now,
> since the rk3399 one is not shared-friendly.
Yeah I realize I haven't been very careful there and didn't really check that
the IOMMU driver is really safe to handle shared interrupts either. I'll take
a look a that when crafting v2.
> > if (ret) {
> > dev_err(vpu->dev, "Could not request %s IRQ.\n",
> > irq_name);
> > diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> > index 34c9e4649a25..07f516fd7a2e 100644
> > --- a/drivers/staging/media/hantro/hantro_hw.h
> > +++ b/drivers/staging/media/hantro/hantro_hw.h
> > @@ -148,6 +148,7 @@ enum hantro_enc_fmt {
> > RK3288_VPU_ENC_FMT_UYVY422 = 3,
> > };
> >
> > +extern const struct hantro_variant px30_vpu_variant;
> > extern const struct hantro_variant rk3399_vpu_variant;
> > extern const struct hantro_variant rk3328_vpu_variant;
> > extern const struct hantro_variant rk3288_vpu_variant;
> > diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw.c b/drivers/staging/media/hantro/rk3399_vpu_hw.c
> > index 7a7962cf771e..4112f98baa60 100644
> > --- a/drivers/staging/media/hantro/rk3399_vpu_hw.c
> > +++ b/drivers/staging/media/hantro/rk3399_vpu_hw.c
>
> Perhaps it's time to rename this to rockchip_vpu_hw.c,
> and merge rk3288 and rk3399? It's a nitpick, though.
Haha, I was thinking the exact same thing but wasn't sure it would be welcome!
I was thinking of rockchip_vpu2_hw.c or rockchip_vdpu2_hw.c since that's
apparently how it's called in Rockchip terminology: VDPU2 and VEPU2 for the
Hantro G1 and H1 with the shuffled register layout. The rk3288 stuff is
probably VDPU1/VEPU1 and we might want to rename it accordingly as well.
Cheers and thanks for the review!
Paul
> > @@ -220,3 +220,24 @@ const struct hantro_variant rk3328_vpu_variant = {
> > .clk_names = rk3399_clk_names,
> > .num_clocks = ARRAY_SIZE(rk3399_clk_names),
> > };
> > +
> > +static const char * const px30_clk_names[] = {
> > + "aclk", "hclk", "sclk"
> > +};
> > +
> > +const struct hantro_variant px30_vpu_variant = {
> > + .enc_offset = 0x0,
> > + .enc_fmts = rk3399_vpu_enc_fmts,
> > + .num_enc_fmts = ARRAY_SIZE(rk3399_vpu_enc_fmts),
> > + .dec_offset = 0x400,
> > + .dec_fmts = rk3399_vpu_dec_fmts,
> > + .num_dec_fmts = ARRAY_SIZE(rk3399_vpu_dec_fmts),
> > + .codec = HANTRO_JPEG_ENCODER | HANTRO_MPEG2_DECODER |
> > + HANTRO_VP8_DECODER,
> > + .codec_ops = rk3399_vpu_codec_ops,
> > + .irqs = rk3399_irqs,
> > + .num_irqs = ARRAY_SIZE(rk3399_irqs),
> > + .init = rk3399_vpu_hw_init,
> > + .clk_names = px30_clk_names,
> > + .num_clocks = ARRAY_SIZE(px30_clk_names)
> > +};
>
> Thanks,
> Ezequiel
>
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 170 bytes --]
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: Ezequiel Garcia <ezequiel@collabora.com>
Cc: devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-rockchip@lists.infradead.org,
Jacob Chen <jacob-chen@iotwrt.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: Re: [PATCH 5/5] media: hantro: Add support for the Rockchip PX30
Date: Fri, 8 Jan 2021 10:05:16 +0100 [thread overview]
Message-ID: <X/ggTOOTBhGoFDpW@aptenodytes> (raw)
In-Reply-To: <f7291b83fe39d71c3192ea58ebf71e3909bd38af.camel@collabora.com>
[-- Attachment #1.1: Type: text/plain, Size: 6312 bytes --]
Hi Ezequiel,
On Thu 07 Jan 21, 16:08, Ezequiel Garcia wrote:
> Happy to see this patch. It was on my TODO list,
> but I hadn't had time to bringup my rk3326 device.
Same here, I just had an occasion to use it again these days so I jumped
on it!
> A few comments.
>
> On Thu, 2021-01-07 at 14:41 +0100, Paul Kocialkowski wrote:
> > The PX30 SoC includes both the VDPU2 and VEPU2 blocks which are similar
> > to the RK3399 (Hantro G1/H1 with shuffled registers).
> >
> > Besides taking an extra clock, it also shares an interrupt with the IOMMU
> > so it's necessary to request the interrupt shared.
> >
>
> Could you clarify on the commit description which iommu device interrupt
> line is being shared?
Sure! It's IRQ 79 of the GIC that's shared with vopl_mmu.
It's not very obvious in the dt commit.
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> > drivers/staging/media/hantro/hantro_drv.c | 5 +++--
> > drivers/staging/media/hantro/hantro_hw.h | 1 +
> > drivers/staging/media/hantro/rk3399_vpu_hw.c | 21 ++++++++++++++++++++
> > 3 files changed, 25 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > index e5f200e64993..076a7782b476 100644
> > --- a/drivers/staging/media/hantro/hantro_drv.c
> > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > @@ -472,6 +472,7 @@ static const struct v4l2_file_operations hantro_fops = {
> >
> > static const struct of_device_id of_hantro_match[] = {
> > #ifdef CONFIG_VIDEO_HANTRO_ROCKCHIP
> > + { .compatible = "rockchip,px30-vpu", .data = &px30_vpu_variant, },
> > { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
> > { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
> > { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
> > @@ -796,8 +797,8 @@ static int hantro_probe(struct platform_device *pdev)
> > return -ENXIO;
> >
> > ret = devm_request_irq(vpu->dev, irq,
> > - vpu->variant->irqs[i].handler, 0,
> > - dev_name(vpu->dev), vpu);
> > + vpu->variant->irqs[i].handler,
> > + IRQF_SHARED, dev_name(vpu->dev), vpu);
>
> Maybe this irq flag should be part of vpu->variant? It sounds like an IP block
> integration specific thing.
Ah right, I agree that it would be justified. But it would also be simple to
just fix the irq handlers and assume this can generally be the case, because it
feels like a bit of a detail to justify a flag.
Do you think this could be a safe/workable assumption?
> Also, you will need a px30-specific interrupt handler now,
> since the rk3399 one is not shared-friendly.
Yeah I realize I haven't been very careful there and didn't really check that
the IOMMU driver is really safe to handle shared interrupts either. I'll take
a look a that when crafting v2.
> > if (ret) {
> > dev_err(vpu->dev, "Could not request %s IRQ.\n",
> > irq_name);
> > diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> > index 34c9e4649a25..07f516fd7a2e 100644
> > --- a/drivers/staging/media/hantro/hantro_hw.h
> > +++ b/drivers/staging/media/hantro/hantro_hw.h
> > @@ -148,6 +148,7 @@ enum hantro_enc_fmt {
> > RK3288_VPU_ENC_FMT_UYVY422 = 3,
> > };
> >
> > +extern const struct hantro_variant px30_vpu_variant;
> > extern const struct hantro_variant rk3399_vpu_variant;
> > extern const struct hantro_variant rk3328_vpu_variant;
> > extern const struct hantro_variant rk3288_vpu_variant;
> > diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw.c b/drivers/staging/media/hantro/rk3399_vpu_hw.c
> > index 7a7962cf771e..4112f98baa60 100644
> > --- a/drivers/staging/media/hantro/rk3399_vpu_hw.c
> > +++ b/drivers/staging/media/hantro/rk3399_vpu_hw.c
>
> Perhaps it's time to rename this to rockchip_vpu_hw.c,
> and merge rk3288 and rk3399? It's a nitpick, though.
Haha, I was thinking the exact same thing but wasn't sure it would be welcome!
I was thinking of rockchip_vpu2_hw.c or rockchip_vdpu2_hw.c since that's
apparently how it's called in Rockchip terminology: VDPU2 and VEPU2 for the
Hantro G1 and H1 with the shuffled register layout. The rk3288 stuff is
probably VDPU1/VEPU1 and we might want to rename it accordingly as well.
Cheers and thanks for the review!
Paul
> > @@ -220,3 +220,24 @@ const struct hantro_variant rk3328_vpu_variant = {
> > .clk_names = rk3399_clk_names,
> > .num_clocks = ARRAY_SIZE(rk3399_clk_names),
> > };
> > +
> > +static const char * const px30_clk_names[] = {
> > + "aclk", "hclk", "sclk"
> > +};
> > +
> > +const struct hantro_variant px30_vpu_variant = {
> > + .enc_offset = 0x0,
> > + .enc_fmts = rk3399_vpu_enc_fmts,
> > + .num_enc_fmts = ARRAY_SIZE(rk3399_vpu_enc_fmts),
> > + .dec_offset = 0x400,
> > + .dec_fmts = rk3399_vpu_dec_fmts,
> > + .num_dec_fmts = ARRAY_SIZE(rk3399_vpu_dec_fmts),
> > + .codec = HANTRO_JPEG_ENCODER | HANTRO_MPEG2_DECODER |
> > + HANTRO_VP8_DECODER,
> > + .codec_ops = rk3399_vpu_codec_ops,
> > + .irqs = rk3399_irqs,
> > + .num_irqs = ARRAY_SIZE(rk3399_irqs),
> > + .init = rk3399_vpu_hw_init,
> > + .clk_names = px30_clk_names,
> > + .num_clocks = ARRAY_SIZE(px30_clk_names)
> > +};
>
> Thanks,
> Ezequiel
>
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: Ezequiel Garcia <ezequiel@collabora.com>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jacob Chen <jacob-chen@iotwrt.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Philipp Zabel <p.zabel@pengutronix.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH 5/5] media: hantro: Add support for the Rockchip PX30
Date: Fri, 8 Jan 2021 10:05:16 +0100 [thread overview]
Message-ID: <X/ggTOOTBhGoFDpW@aptenodytes> (raw)
In-Reply-To: <f7291b83fe39d71c3192ea58ebf71e3909bd38af.camel@collabora.com>
[-- Attachment #1: Type: text/plain, Size: 6312 bytes --]
Hi Ezequiel,
On Thu 07 Jan 21, 16:08, Ezequiel Garcia wrote:
> Happy to see this patch. It was on my TODO list,
> but I hadn't had time to bringup my rk3326 device.
Same here, I just had an occasion to use it again these days so I jumped
on it!
> A few comments.
>
> On Thu, 2021-01-07 at 14:41 +0100, Paul Kocialkowski wrote:
> > The PX30 SoC includes both the VDPU2 and VEPU2 blocks which are similar
> > to the RK3399 (Hantro G1/H1 with shuffled registers).
> >
> > Besides taking an extra clock, it also shares an interrupt with the IOMMU
> > so it's necessary to request the interrupt shared.
> >
>
> Could you clarify on the commit description which iommu device interrupt
> line is being shared?
Sure! It's IRQ 79 of the GIC that's shared with vopl_mmu.
It's not very obvious in the dt commit.
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> > drivers/staging/media/hantro/hantro_drv.c | 5 +++--
> > drivers/staging/media/hantro/hantro_hw.h | 1 +
> > drivers/staging/media/hantro/rk3399_vpu_hw.c | 21 ++++++++++++++++++++
> > 3 files changed, 25 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> > index e5f200e64993..076a7782b476 100644
> > --- a/drivers/staging/media/hantro/hantro_drv.c
> > +++ b/drivers/staging/media/hantro/hantro_drv.c
> > @@ -472,6 +472,7 @@ static const struct v4l2_file_operations hantro_fops = {
> >
> > static const struct of_device_id of_hantro_match[] = {
> > #ifdef CONFIG_VIDEO_HANTRO_ROCKCHIP
> > + { .compatible = "rockchip,px30-vpu", .data = &px30_vpu_variant, },
> > { .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
> > { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
> > { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
> > @@ -796,8 +797,8 @@ static int hantro_probe(struct platform_device *pdev)
> > return -ENXIO;
> >
> > ret = devm_request_irq(vpu->dev, irq,
> > - vpu->variant->irqs[i].handler, 0,
> > - dev_name(vpu->dev), vpu);
> > + vpu->variant->irqs[i].handler,
> > + IRQF_SHARED, dev_name(vpu->dev), vpu);
>
> Maybe this irq flag should be part of vpu->variant? It sounds like an IP block
> integration specific thing.
Ah right, I agree that it would be justified. But it would also be simple to
just fix the irq handlers and assume this can generally be the case, because it
feels like a bit of a detail to justify a flag.
Do you think this could be a safe/workable assumption?
> Also, you will need a px30-specific interrupt handler now,
> since the rk3399 one is not shared-friendly.
Yeah I realize I haven't been very careful there and didn't really check that
the IOMMU driver is really safe to handle shared interrupts either. I'll take
a look a that when crafting v2.
> > if (ret) {
> > dev_err(vpu->dev, "Could not request %s IRQ.\n",
> > irq_name);
> > diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> > index 34c9e4649a25..07f516fd7a2e 100644
> > --- a/drivers/staging/media/hantro/hantro_hw.h
> > +++ b/drivers/staging/media/hantro/hantro_hw.h
> > @@ -148,6 +148,7 @@ enum hantro_enc_fmt {
> > RK3288_VPU_ENC_FMT_UYVY422 = 3,
> > };
> >
> > +extern const struct hantro_variant px30_vpu_variant;
> > extern const struct hantro_variant rk3399_vpu_variant;
> > extern const struct hantro_variant rk3328_vpu_variant;
> > extern const struct hantro_variant rk3288_vpu_variant;
> > diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw.c b/drivers/staging/media/hantro/rk3399_vpu_hw.c
> > index 7a7962cf771e..4112f98baa60 100644
> > --- a/drivers/staging/media/hantro/rk3399_vpu_hw.c
> > +++ b/drivers/staging/media/hantro/rk3399_vpu_hw.c
>
> Perhaps it's time to rename this to rockchip_vpu_hw.c,
> and merge rk3288 and rk3399? It's a nitpick, though.
Haha, I was thinking the exact same thing but wasn't sure it would be welcome!
I was thinking of rockchip_vpu2_hw.c or rockchip_vdpu2_hw.c since that's
apparently how it's called in Rockchip terminology: VDPU2 and VEPU2 for the
Hantro G1 and H1 with the shuffled register layout. The rk3288 stuff is
probably VDPU1/VEPU1 and we might want to rename it accordingly as well.
Cheers and thanks for the review!
Paul
> > @@ -220,3 +220,24 @@ const struct hantro_variant rk3328_vpu_variant = {
> > .clk_names = rk3399_clk_names,
> > .num_clocks = ARRAY_SIZE(rk3399_clk_names),
> > };
> > +
> > +static const char * const px30_clk_names[] = {
> > + "aclk", "hclk", "sclk"
> > +};
> > +
> > +const struct hantro_variant px30_vpu_variant = {
> > + .enc_offset = 0x0,
> > + .enc_fmts = rk3399_vpu_enc_fmts,
> > + .num_enc_fmts = ARRAY_SIZE(rk3399_vpu_enc_fmts),
> > + .dec_offset = 0x400,
> > + .dec_fmts = rk3399_vpu_dec_fmts,
> > + .num_dec_fmts = ARRAY_SIZE(rk3399_vpu_dec_fmts),
> > + .codec = HANTRO_JPEG_ENCODER | HANTRO_MPEG2_DECODER |
> > + HANTRO_VP8_DECODER,
> > + .codec_ops = rk3399_vpu_codec_ops,
> > + .irqs = rk3399_irqs,
> > + .num_irqs = ARRAY_SIZE(rk3399_irqs),
> > + .init = rk3399_vpu_hw_init,
> > + .clk_names = px30_clk_names,
> > + .num_clocks = ARRAY_SIZE(px30_clk_names)
> > +};
>
> Thanks,
> Ezequiel
>
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2021-01-08 9:05 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-07 13:40 [PATCH 0/5] Rockchip PX30 RGA and VPU support Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 13:40 ` [PATCH 1/5] dt-bindings: media: rockchip-rga: Add PX30 compatible Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 15:47 ` Rob Herring
2021-01-07 15:47 ` Rob Herring
2021-01-07 15:47 ` Rob Herring
2021-01-07 13:40 ` [PATCH 2/5] arm64: dts: rockchip: Add RGA support to the PX30 Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 14:24 ` Paul Kocialkowski
2021-01-07 14:24 ` Paul Kocialkowski
2021-01-07 14:24 ` Paul Kocialkowski
2021-01-07 13:40 ` [PATCH 3/5] dt-bindings: media: rockchip-vpu: Add PX30 compatible Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 13:40 ` Paul Kocialkowski
2021-01-07 14:55 ` Philipp Zabel
2021-01-07 14:55 ` Philipp Zabel
2021-01-07 14:55 ` Philipp Zabel
2021-01-11 17:20 ` Paul Kocialkowski
2021-01-11 17:20 ` Paul Kocialkowski
2021-01-11 17:20 ` Paul Kocialkowski
2021-01-07 15:47 ` Rob Herring
2021-01-07 15:47 ` Rob Herring
2021-01-07 15:47 ` Rob Herring
2021-01-07 13:41 ` [PATCH 4/5] arm64: dts: rockchip: Add VPU support for the PX30 Paul Kocialkowski
2021-01-07 13:41 ` Paul Kocialkowski
2021-01-07 13:41 ` Paul Kocialkowski
2021-01-07 13:41 ` [PATCH 5/5] media: hantro: Add support for the Rockchip PX30 Paul Kocialkowski
2021-01-07 13:41 ` Paul Kocialkowski
2021-01-07 13:41 ` Paul Kocialkowski
2021-01-07 19:08 ` Ezequiel Garcia
2021-01-07 19:08 ` Ezequiel Garcia
2021-01-07 19:08 ` Ezequiel Garcia
2021-01-08 9:05 ` Paul Kocialkowski [this message]
2021-01-08 9:05 ` Paul Kocialkowski
2021-01-08 9:05 ` Paul Kocialkowski
2021-01-08 10:48 ` Heiko Stübner
2021-01-08 10:48 ` Heiko Stübner
2021-01-08 10:48 ` Heiko Stübner
2021-01-08 10:49 ` Heiko Stübner
2021-01-08 10:49 ` Heiko Stübner
2021-01-08 10:49 ` Heiko Stübner
2021-01-08 13:13 ` Ezequiel Garcia
2021-01-08 13:13 ` Ezequiel Garcia
2021-01-08 13:13 ` Ezequiel Garcia
2021-01-11 17:23 ` Paul Kocialkowski
2021-01-11 17:23 ` Paul Kocialkowski
2021-01-11 17:23 ` Paul Kocialkowski
2021-06-21 2:57 ` [PATCH 0/5] Rockchip PX30 RGA and VPU support Ezequiel Garcia
2021-06-21 2:57 ` Ezequiel Garcia
2021-06-21 2:57 ` Ezequiel Garcia
2021-10-16 15:15 ` Michael Nazzareno Trimarchi
2021-10-16 15:15 ` Michael Nazzareno Trimarchi
2021-10-16 15:15 ` Michael Nazzareno Trimarchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=X/ggTOOTBhGoFDpW@aptenodytes \
--to=paul.kocialkowski@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=ezequiel@collabora.com \
--cc=gregkh@linuxfoundation.org \
--cc=heiko@sntech.de \
--cc=jacob-chen@iotwrt.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.