* [PATCH v3 1/3] scsi: protect req->aiocb with AioContext lock
2023-02-21 21:22 [PATCH v3 0/3] virtio-scsi: fix SCSIDevice hot unplug with IOThread Stefan Hajnoczi
@ 2023-02-21 21:22 ` Stefan Hajnoczi
2023-02-21 21:22 ` [PATCH v3 2/3] dma-helpers: prevent dma_blk_cb() vs dma_aio_cancel() race Stefan Hajnoczi
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Stefan Hajnoczi @ 2023-02-21 21:22 UTC (permalink / raw)
To: qemu-devel
Cc: Michael S. Tsirkin, Peter Xu, Paolo Bonzini,
Philippe Mathieu-Daudé, David Hildenbrand, Fam Zheng,
qemu-block, Stefan Hajnoczi, Eric Blake, Kevin Wolf
If requests are being processed in the IOThread when a SCSIDevice is
unplugged, scsi_device_purge_requests() -> scsi_req_cancel_async() races
with I/O completion callbacks. Both threads load and store req->aiocb.
This can lead to assert(r->req.aiocb == NULL) failures and undefined
behavior.
Protect r->req.aiocb with the AioContext lock to prevent the race.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/scsi/scsi-disk.c | 23 ++++++++++++++++-------
hw/scsi/scsi-generic.c | 11 ++++++-----
2 files changed, 22 insertions(+), 12 deletions(-)
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index d4e360850f..115584f8b9 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -273,9 +273,11 @@ static void scsi_aio_complete(void *opaque, int ret)
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
if (scsi_disk_req_check_error(r, ret, true)) {
goto done;
}
@@ -357,10 +359,11 @@ static void scsi_dma_complete(void *opaque, int ret)
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
if (ret < 0) {
block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
} else {
@@ -393,10 +396,11 @@ static void scsi_read_complete(void *opaque, int ret)
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
if (ret < 0) {
block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
} else {
@@ -446,10 +450,11 @@ static void scsi_do_read_cb(void *opaque, int ret)
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
assert (r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
if (ret < 0) {
block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
} else {
@@ -530,10 +535,11 @@ static void scsi_write_complete(void * opaque, int ret)
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
assert (r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
if (ret < 0) {
block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct);
} else {
@@ -1737,10 +1743,11 @@ static void scsi_unmap_complete(void *opaque, int ret)
SCSIDiskReq *r = data->r;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
if (scsi_disk_req_check_error(r, ret, true)) {
scsi_req_unref(&r->req);
g_free(data);
@@ -1816,9 +1823,11 @@ static void scsi_write_same_complete(void *opaque, int ret)
SCSIDiskReq *r = data->r;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
+ aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
+
if (scsi_disk_req_check_error(r, ret, true)) {
goto done;
}
diff --git a/hw/scsi/scsi-generic.c b/hw/scsi/scsi-generic.c
index 92cce20a4d..ac9fa662b4 100644
--- a/hw/scsi/scsi-generic.c
+++ b/hw/scsi/scsi-generic.c
@@ -111,10 +111,11 @@ static void scsi_command_complete(void *opaque, int ret)
SCSIGenericReq *r = (SCSIGenericReq *)opaque;
SCSIDevice *s = r->req.dev;
+ aio_context_acquire(blk_get_aio_context(s->conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->conf.blk));
scsi_command_complete_noio(r, ret);
aio_context_release(blk_get_aio_context(s->conf.blk));
}
@@ -269,11 +270,11 @@ static void scsi_read_complete(void * opaque, int ret)
SCSIDevice *s = r->req.dev;
int len;
+ aio_context_acquire(blk_get_aio_context(s->conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->conf.blk));
-
if (ret || r->req.io_canceled) {
scsi_command_complete_noio(r, ret);
goto done;
@@ -386,11 +387,11 @@ static void scsi_write_complete(void * opaque, int ret)
trace_scsi_generic_write_complete(ret);
+ aio_context_acquire(blk_get_aio_context(s->conf.blk));
+
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
- aio_context_acquire(blk_get_aio_context(s->conf.blk));
-
if (ret || r->req.io_canceled) {
scsi_command_complete_noio(r, ret);
goto done;
--
2.39.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v3 2/3] dma-helpers: prevent dma_blk_cb() vs dma_aio_cancel() race
2023-02-21 21:22 [PATCH v3 0/3] virtio-scsi: fix SCSIDevice hot unplug with IOThread Stefan Hajnoczi
2023-02-21 21:22 ` [PATCH v3 1/3] scsi: protect req->aiocb with AioContext lock Stefan Hajnoczi
@ 2023-02-21 21:22 ` Stefan Hajnoczi
2023-02-21 21:22 ` [PATCH v3 3/3] virtio-scsi: reset SCSI devices from main loop thread Stefan Hajnoczi
2023-02-23 17:21 ` [PATCH v3 0/3] virtio-scsi: fix SCSIDevice hot unplug with IOThread Kevin Wolf
3 siblings, 0 replies; 5+ messages in thread
From: Stefan Hajnoczi @ 2023-02-21 21:22 UTC (permalink / raw)
To: qemu-devel
Cc: Michael S. Tsirkin, Peter Xu, Paolo Bonzini,
Philippe Mathieu-Daudé, David Hildenbrand, Fam Zheng,
qemu-block, Stefan Hajnoczi, Eric Blake
dma_blk_cb() only takes the AioContext lock around ->io_func(). That
means the rest of dma_blk_cb() is not protected. In particular, the
DMAAIOCB field accesses happen outside the lock.
There is a race when the main loop thread holds the AioContext lock and
invokes scsi_device_purge_requests() -> bdrv_aio_cancel() ->
dma_aio_cancel() while an IOThread executes dma_blk_cb(). The dbs->acb
field determines how cancellation proceeds. If dma_aio_cancel() sees
dbs->acb == NULL while dma_blk_cb() is still running, the request can be
completed twice (-ECANCELED and the actual return value).
The following assertion can occur with virtio-scsi when an IOThread is
used:
../hw/scsi/scsi-disk.c:368: scsi_dma_complete: Assertion `r->req.aiocb != NULL' failed.
Fix the race by holding the AioContext across dma_blk_cb(). Now
dma_aio_cancel() under the AioContext lock will not see
inconsistent/intermediate states.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/scsi/scsi-disk.c | 4 +---
softmmu/dma-helpers.c | 12 +++++++-----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/hw/scsi/scsi-disk.c b/hw/scsi/scsi-disk.c
index 115584f8b9..97c9b1c8cd 100644
--- a/hw/scsi/scsi-disk.c
+++ b/hw/scsi/scsi-disk.c
@@ -354,13 +354,12 @@ done:
scsi_req_unref(&r->req);
}
+/* Called with AioContext lock held */
static void scsi_dma_complete(void *opaque, int ret)
{
SCSIDiskReq *r = (SCSIDiskReq *)opaque;
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
- aio_context_acquire(blk_get_aio_context(s->qdev.conf.blk));
-
assert(r->req.aiocb != NULL);
r->req.aiocb = NULL;
@@ -370,7 +369,6 @@ static void scsi_dma_complete(void *opaque, int ret)
block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct);
}
scsi_dma_complete_noio(r, ret);
- aio_context_release(blk_get_aio_context(s->qdev.conf.blk));
}
static void scsi_read_complete_noio(SCSIDiskReq *r, int ret)
diff --git a/softmmu/dma-helpers.c b/softmmu/dma-helpers.c
index 7820fec54c..2463964805 100644
--- a/softmmu/dma-helpers.c
+++ b/softmmu/dma-helpers.c
@@ -113,17 +113,19 @@ static void dma_complete(DMAAIOCB *dbs, int ret)
static void dma_blk_cb(void *opaque, int ret)
{
DMAAIOCB *dbs = (DMAAIOCB *)opaque;
+ AioContext *ctx = dbs->ctx;
dma_addr_t cur_addr, cur_len;
void *mem;
trace_dma_blk_cb(dbs, ret);
+ aio_context_acquire(ctx);
dbs->acb = NULL;
dbs->offset += dbs->iov.size;
if (dbs->sg_cur_index == dbs->sg->nsg || ret < 0) {
dma_complete(dbs, ret);
- return;
+ goto out;
}
dma_blk_unmap(dbs);
@@ -164,9 +166,9 @@ static void dma_blk_cb(void *opaque, int ret)
if (dbs->iov.size == 0) {
trace_dma_map_wait(dbs);
- dbs->bh = aio_bh_new(dbs->ctx, reschedule_dma, dbs);
+ dbs->bh = aio_bh_new(ctx, reschedule_dma, dbs);
cpu_register_map_client(dbs->bh);
- return;
+ goto out;
}
if (!QEMU_IS_ALIGNED(dbs->iov.size, dbs->align)) {
@@ -174,11 +176,11 @@ static void dma_blk_cb(void *opaque, int ret)
QEMU_ALIGN_DOWN(dbs->iov.size, dbs->align));
}
- aio_context_acquire(dbs->ctx);
dbs->acb = dbs->io_func(dbs->offset, &dbs->iov,
dma_blk_cb, dbs, dbs->io_func_opaque);
- aio_context_release(dbs->ctx);
assert(dbs->acb);
+out:
+ aio_context_release(ctx);
}
static void dma_aio_cancel(BlockAIOCB *acb)
--
2.39.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v3 3/3] virtio-scsi: reset SCSI devices from main loop thread
2023-02-21 21:22 [PATCH v3 0/3] virtio-scsi: fix SCSIDevice hot unplug with IOThread Stefan Hajnoczi
2023-02-21 21:22 ` [PATCH v3 1/3] scsi: protect req->aiocb with AioContext lock Stefan Hajnoczi
2023-02-21 21:22 ` [PATCH v3 2/3] dma-helpers: prevent dma_blk_cb() vs dma_aio_cancel() race Stefan Hajnoczi
@ 2023-02-21 21:22 ` Stefan Hajnoczi
2023-02-23 17:21 ` [PATCH v3 0/3] virtio-scsi: fix SCSIDevice hot unplug with IOThread Kevin Wolf
3 siblings, 0 replies; 5+ messages in thread
From: Stefan Hajnoczi @ 2023-02-21 21:22 UTC (permalink / raw)
To: qemu-devel
Cc: Michael S. Tsirkin, Peter Xu, Paolo Bonzini,
Philippe Mathieu-Daudé, David Hildenbrand, Fam Zheng,
qemu-block, Stefan Hajnoczi, Qing Wang, Eric Blake
When an IOThread is configured, the ctrl virtqueue is processed in the
IOThread. TMFs that reset SCSI devices are currently called directly
from the IOThread and trigger an assertion failure in blk_drain() from
the following call stack:
virtio_scsi_handle_ctrl_req -> virtio_scsi_do_tmf -> device_code_reset
-> scsi_disk_reset -> scsi_device_purge_requests -> blk_drain
../block/block-backend.c:1780: void blk_drain(BlockBackend *): Assertion `qemu_in_main_thread()' failed.
The blk_drain() function is not designed to be called from an IOThread
because it needs the Big QEMU Lock (BQL).
This patch defers TMFs that reset SCSI devices to a Bottom Half (BH)
that runs in the main loop thread under the BQL. This way it's safe to
call blk_drain() and the assertion failure is avoided.
Introduce s->tmf_bh_list for tracking TMF requests that have been
deferred to the BH. When the BH runs it will grab the entire list and
process all requests. Care must be taken to clear the list when the
virtio-scsi device is reset or unrealized. Otherwise deferred TMF
requests could execute later and lead to use-after-free or other
undefined behavior.
The s->resetting counter that's used by TMFs that reset SCSI devices is
accessed from multiple threads. This patch makes that explicit by using
atomic accessor functions. With this patch applied the counter is only
modified by the main loop thread under the BQL but can be read by any
thread.
Reported-by: Qing Wang <qinwang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
include/hw/virtio/virtio-scsi.h | 11 ++-
hw/scsi/virtio-scsi.c | 169 +++++++++++++++++++++++++-------
2 files changed, 143 insertions(+), 37 deletions(-)
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 37b75e15e3..779568ab5d 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -74,13 +74,22 @@ struct VirtIOSCSICommon {
VirtQueue **cmd_vqs;
};
+struct VirtIOSCSIReq;
+
struct VirtIOSCSI {
VirtIOSCSICommon parent_obj;
SCSIBus bus;
- int resetting;
+ int resetting; /* written from main loop thread, read from any thread */
bool events_dropped;
+ /*
+ * TMFs deferred to main loop BH. These fields are protected by
+ * virtio_scsi_acquire().
+ */
+ QEMUBH *tmf_bh;
+ QTAILQ_HEAD(, VirtIOSCSIReq) tmf_bh_list;
+
/* Fields for dataplane below */
AioContext *ctx; /* one iothread per virtio-scsi-pci for now */
diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 2b649ca976..612c525d9d 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -43,13 +43,11 @@ typedef struct VirtIOSCSIReq {
QEMUSGList qsgl;
QEMUIOVector resp_iov;
- union {
- /* Used for two-stage request submission */
- QTAILQ_ENTRY(VirtIOSCSIReq) next;
+ /* Used for two-stage request submission and TMFs deferred to BH */
+ QTAILQ_ENTRY(VirtIOSCSIReq) next;
- /* Used for cancellation of request during TMFs */
- int remaining;
- };
+ /* Used for cancellation of request during TMFs */
+ int remaining;
SCSIRequest *sreq;
size_t resp_size;
@@ -294,6 +292,122 @@ static inline void virtio_scsi_ctx_check(VirtIOSCSI *s, SCSIDevice *d)
}
}
+static void virtio_scsi_do_one_tmf_bh(VirtIOSCSIReq *req)
+{
+ VirtIOSCSI *s = req->dev;
+ SCSIDevice *d = virtio_scsi_device_get(s, req->req.tmf.lun);
+ BusChild *kid;
+ int target;
+
+ switch (req->req.tmf.subtype) {
+ case VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET:
+ if (!d) {
+ req->resp.tmf.response = VIRTIO_SCSI_S_BAD_TARGET;
+ goto out;
+ }
+ if (d->lun != virtio_scsi_get_lun(req->req.tmf.lun)) {
+ req->resp.tmf.response = VIRTIO_SCSI_S_INCORRECT_LUN;
+ goto out;
+ }
+ qatomic_inc(&s->resetting);
+ device_cold_reset(&d->qdev);
+ qatomic_dec(&s->resetting);
+ break;
+
+ case VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET:
+ target = req->req.tmf.lun[1];
+ qatomic_inc(&s->resetting);
+
+ rcu_read_lock();
+ QTAILQ_FOREACH_RCU(kid, &s->bus.qbus.children, sibling) {
+ SCSIDevice *d1 = SCSI_DEVICE(kid->child);
+ if (d1->channel == 0 && d1->id == target) {
+ device_cold_reset(&d1->qdev);
+ }
+ }
+ rcu_read_unlock();
+
+ qatomic_dec(&s->resetting);
+ break;
+
+ default:
+ g_assert_not_reached();
+ break;
+ }
+
+out:
+ object_unref(OBJECT(d));
+
+ virtio_scsi_acquire(s);
+ virtio_scsi_complete_req(req);
+ virtio_scsi_release(s);
+}
+
+/* Some TMFs must be processed from the main loop thread */
+static void virtio_scsi_do_tmf_bh(void *opaque)
+{
+ VirtIOSCSI *s = opaque;
+ QTAILQ_HEAD(, VirtIOSCSIReq) reqs = QTAILQ_HEAD_INITIALIZER(reqs);
+ VirtIOSCSIReq *req;
+ VirtIOSCSIReq *tmp;
+
+ GLOBAL_STATE_CODE();
+
+ virtio_scsi_acquire(s);
+
+ QTAILQ_FOREACH_SAFE(req, &s->tmf_bh_list, next, tmp) {
+ QTAILQ_REMOVE(&s->tmf_bh_list, req, next);
+ QTAILQ_INSERT_TAIL(&reqs, req, next);
+ }
+
+ qemu_bh_delete(s->tmf_bh);
+ s->tmf_bh = NULL;
+
+ virtio_scsi_release(s);
+
+ QTAILQ_FOREACH_SAFE(req, &reqs, next, tmp) {
+ QTAILQ_REMOVE(&reqs, req, next);
+ virtio_scsi_do_one_tmf_bh(req);
+ }
+}
+
+static void virtio_scsi_reset_tmf_bh(VirtIOSCSI *s)
+{
+ VirtIOSCSIReq *req;
+ VirtIOSCSIReq *tmp;
+
+ GLOBAL_STATE_CODE();
+
+ virtio_scsi_acquire(s);
+
+ if (s->tmf_bh) {
+ qemu_bh_delete(s->tmf_bh);
+ s->tmf_bh = NULL;
+ }
+
+ QTAILQ_FOREACH_SAFE(req, &s->tmf_bh_list, next, tmp) {
+ QTAILQ_REMOVE(&s->tmf_bh_list, req, next);
+
+ /* SAM-6 6.3.2 Hard reset */
+ req->resp.tmf.response = VIRTIO_SCSI_S_TARGET_FAILURE;
+ virtio_scsi_complete_req(req);
+ }
+
+ virtio_scsi_release(s);
+}
+
+static void virtio_scsi_defer_tmf_to_bh(VirtIOSCSIReq *req)
+{
+ VirtIOSCSI *s = req->dev;
+
+ QTAILQ_INSERT_TAIL(&s->tmf_bh_list, req, next);
+
+ if (!s->tmf_bh) {
+ s->tmf_bh = qemu_bh_new(virtio_scsi_do_tmf_bh, s);
+ qemu_bh_schedule(s->tmf_bh);
+ }
+}
+
/* Return 0 if the request is ready to be completed and return to guest;
* -EINPROGRESS if the request is submitted and will be completed later, in the
* case of async cancellation. */
@@ -301,8 +415,6 @@ static int virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
{
SCSIDevice *d = virtio_scsi_device_get(s, req->req.tmf.lun);
SCSIRequest *r, *next;
- BusChild *kid;
- int target;
int ret = 0;
virtio_scsi_ctx_check(s, d);
@@ -359,15 +471,9 @@ static int virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
break;
case VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET:
- if (!d) {
- goto fail;
- }
- if (d->lun != virtio_scsi_get_lun(req->req.tmf.lun)) {
- goto incorrect_lun;
- }
- s->resetting++;
- device_cold_reset(&d->qdev);
- s->resetting--;
+ case VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET:
+ virtio_scsi_defer_tmf_to_bh(req);
+ ret = -EINPROGRESS;
break;
case VIRTIO_SCSI_T_TMF_ABORT_TASK_SET:
@@ -410,22 +516,6 @@ static int virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
}
break;
- case VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET:
- target = req->req.tmf.lun[1];
- s->resetting++;
-
- rcu_read_lock();
- QTAILQ_FOREACH_RCU(kid, &s->bus.qbus.children, sibling) {
- SCSIDevice *d1 = SCSI_DEVICE(kid->child);
- if (d1->channel == 0 && d1->id == target) {
- device_cold_reset(&d1->qdev);
- }
- }
- rcu_read_unlock();
-
- s->resetting--;
- break;
-
case VIRTIO_SCSI_T_TMF_CLEAR_ACA:
default:
req->resp.tmf.response = VIRTIO_SCSI_S_FUNCTION_REJECTED;
@@ -655,7 +745,7 @@ static void virtio_scsi_request_cancelled(SCSIRequest *r)
if (!req) {
return;
}
- if (req->dev->resetting) {
+ if (qatomic_read(&req->dev->resetting)) {
req->resp.cmd.response = VIRTIO_SCSI_S_RESET;
} else {
req->resp.cmd.response = VIRTIO_SCSI_S_ABORTED;
@@ -831,9 +921,12 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev);
assert(!s->dataplane_started);
- s->resetting++;
+
+ virtio_scsi_reset_tmf_bh(s);
+
+ qatomic_inc(&s->resetting);
bus_cold_reset(BUS(&s->bus));
- s->resetting--;
+ qatomic_dec(&s->resetting);
vs->sense_size = VIRTIO_SCSI_SENSE_DEFAULT_SIZE;
vs->cdb_size = VIRTIO_SCSI_CDB_DEFAULT_SIZE;
@@ -1053,6 +1146,8 @@ static void virtio_scsi_device_realize(DeviceState *dev, Error **errp)
VirtIOSCSI *s = VIRTIO_SCSI(dev);
Error *err = NULL;
+ QTAILQ_INIT(&s->tmf_bh_list);
+
virtio_scsi_common_realize(dev,
virtio_scsi_handle_ctrl,
virtio_scsi_handle_event,
@@ -1090,6 +1185,8 @@ static void virtio_scsi_device_unrealize(DeviceState *dev)
{
VirtIOSCSI *s = VIRTIO_SCSI(dev);
+ virtio_scsi_reset_tmf_bh(s);
+
qbus_set_hotplug_handler(BUS(&s->bus), NULL);
virtio_scsi_common_unrealize(dev);
}
--
2.39.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v3 0/3] virtio-scsi: fix SCSIDevice hot unplug with IOThread
2023-02-21 21:22 [PATCH v3 0/3] virtio-scsi: fix SCSIDevice hot unplug with IOThread Stefan Hajnoczi
` (2 preceding siblings ...)
2023-02-21 21:22 ` [PATCH v3 3/3] virtio-scsi: reset SCSI devices from main loop thread Stefan Hajnoczi
@ 2023-02-23 17:21 ` Kevin Wolf
3 siblings, 0 replies; 5+ messages in thread
From: Kevin Wolf @ 2023-02-23 17:21 UTC (permalink / raw)
To: Stefan Hajnoczi
Cc: qemu-devel, Michael S. Tsirkin, Peter Xu, Paolo Bonzini,
Philippe Mathieu-Daudé, David Hildenbrand, Fam Zheng,
qemu-block
Am 21.02.2023 um 22:22 hat Stefan Hajnoczi geschrieben:
> v3:
> - Fix s/see/sees/ typo in Patch 2 commit description [Eric]
> - Add call stack to Patch 3 commit description to make it clear how blk_drain()
> is invoked [Kevin]
>
> Unplugging SCSIDevices when virtio-scsi is using an IOThread suffers from race
> conditions:
> - scsi_device_purge_requests() is called from the IOThread in TMF emulation.
> This is unsafe, it should only be called from the BQL.
> - SCSIRequest->aiocb is not protected by a lock, so there are races between the
> main loop thread and the IOThread when scsi_device_purge_requests() runs in
> the main loop thread.
> - DMAAIOCB->acb is not protected by a lock, so there are races in the DMA
> helpers code when cancelling a request from the main loop thread.
>
> These fixes solve assertion failures during SCSIDevice hot unplug in
> virtio-scsi with IOThread. Expanding the use of the AioContext lock isn't great
> since we're in the midst of trying to remove it. However, I think this solution
> is appropriate so that stable trees or distros can backport the fix without
> depending on QEMU multi-queue block layer refactoring.
>
> Special thanks to Qing Wang, who helped me iterate these patches because I
> couldn't reproduce the assertion failures myself.
Thanks, applied to the block branch.
Kevin
^ permalink raw reply [flat|nested] 5+ messages in thread