All of lore.kernel.org
 help / color / mirror / Atom feed
From: Conor Dooley <conor.dooley@microchip.com>
To: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Jonathan Corbet" <corbet@lwn.net>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Conor Dooley" <conor@kernel.org>,
	"Ard Biesheuvel" <ardb@kernel.org>,
	"Björn Töpel" <bjorn@kernel.org>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-riscv@lists.infradead.org,
	"Björn Töpel" <bjorn@rivosinc.com>,
	nathan@kernel.org, llvm@lists.linux.dev, ndesaulniers@google.com
Subject: Re: [PATCH v7 1/1] riscv: Allow to downgrade paging mode from the command line
Date: Mon, 27 Feb 2023 12:31:16 +0000	[thread overview]
Message-ID: <Y/yilORflGv3vXjX@wendy> (raw)
In-Reply-To: <20230224100218.1824569-2-alexghiti@rivosinc.com>

[-- Attachment #1: Type: text/plain, Size: 3495 bytes --]

Hey Alex, clang/llvm folk,

On Fri, Feb 24, 2023 at 11:02:18AM +0100, Alexandre Ghiti wrote:
> Add 2 early command line parameters that allow to downgrade satp mode
> (using the same naming as x86):
> - "no5lvl": use a 4-level page table (down from sv57 to sv48)
> - "no4lvl": use a 3-level page table (down from sv57/sv48 to sv39)
> 
> Note that going through the device tree to get the kernel command line
> works with ACPI too since the efi stub creates a device tree anyway with
> the command line.
> 
> In KASAN kernels, we can't use the libfdt that early in the boot process
> since we are not ready to execute instrumented functions. So instead of
> using the "generic" libfdt, we compile our own versions of those functions
> that are not instrumented and that are prefixed so that they do not
> conflict with the generic ones. We also need the non-instrumented versions
> of the string functions and the prefixed versions of memcpy/memmove.
> 
> This is largely inspired by commit aacd149b6238 ("arm64: head: avoid
> relocating the kernel twice for KASLR") from which I removed compilation
> flags that were not relevant to RISC-V at the moment (LTO, SCS, pie).
> 
> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
> Tested-by: Björn Töpel <bjorn@rivosinc.com>
> Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
> ---
>  .../admin-guide/kernel-parameters.txt         |  5 +-
>  arch/riscv/kernel/Makefile                    |  2 +
>  arch/riscv/kernel/pi/Makefile                 | 37 +++++++++++
>  arch/riscv/kernel/pi/cmdline_early.c          | 62 +++++++++++++++++++

+      4 ld.lld: warning: vmlinux.a(arch/riscv/kernel/pi/string.pi.o):(.init.sdata) is being placed in '.init.sdata'

I'm getting 4 new linker warnings with LLVM=1 clang-15 allmodconfig
builds - but I don't really understand this issue.
Is this spurious, and a just consequence of...

> diff --git a/arch/riscv/kernel/pi/Makefile b/arch/riscv/kernel/pi/Makefile
> new file mode 100644
> index 000000000000..4002ed94b6d3
> --- /dev/null
> +++ b/arch/riscv/kernel/pi/Makefile
> @@ -0,0 +1,37 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# This file was copied from arm64/kernel/pi/Makefile.
> +
> +KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> +		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
> +		   $(call cc-option,-mbranch-protection=none) \
> +		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
> +		   -D__DISABLE_EXPORTS -ffreestanding \
> +		   -fno-asynchronous-unwind-tables -fno-unwind-tables \
> +		   $(call cc-option,-fno-addrsig)
> +
> +CFLAGS_cmdline_early.o += -D__NO_FORTIFY
> +CFLAGS_lib-fdt_ro.o += -D__NO_FORTIFY
> +
> +GCOV_PROFILE	:= n
> +KASAN_SANITIZE	:= n
> +KCSAN_SANITIZE	:= n
> +UBSAN_SANITIZE	:= n
> +KCOV_INSTRUMENT	:= n
> +
> +$(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_ \
> +			       --remove-section=.note.gnu.property \
> +			       --prefix-alloc-sections=.init

...this?

> +$(obj)/%.pi.o: $(obj)/%.o FORCE
> +	$(call if_changed,objcopy)
> +
> +$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
> +	$(call if_changed_rule,cc_o_c)
> +
> +$(obj)/string.o: $(srctree)/lib/string.c FORCE
> +	$(call if_changed_rule,cc_o_c)
> +
> +$(obj)/ctype.o: $(srctree)/lib/ctype.c FORCE
> +	$(call if_changed_rule,cc_o_c)
> +
> +obj-y		:= cmdline_early.pi.o string.pi.o ctype.pi.o lib-fdt.pi.o lib-fdt_ro.pi.o
> +extra-y		:= $(patsubst %.pi.o,%.o,$(obj-y))

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Conor Dooley <conor.dooley@microchip.com>
To: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: "Jonathan Corbet" <corbet@lwn.net>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Conor Dooley" <conor@kernel.org>,
	"Ard Biesheuvel" <ardb@kernel.org>,
	"Björn Töpel" <bjorn@kernel.org>,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-riscv@lists.infradead.org,
	"Björn Töpel" <bjorn@rivosinc.com>,
	nathan@kernel.org, llvm@lists.linux.dev, ndesaulniers@google.com
Subject: Re: [PATCH v7 1/1] riscv: Allow to downgrade paging mode from the command line
Date: Mon, 27 Feb 2023 12:31:16 +0000	[thread overview]
Message-ID: <Y/yilORflGv3vXjX@wendy> (raw)
In-Reply-To: <20230224100218.1824569-2-alexghiti@rivosinc.com>


[-- Attachment #1.1: Type: text/plain, Size: 3495 bytes --]

Hey Alex, clang/llvm folk,

On Fri, Feb 24, 2023 at 11:02:18AM +0100, Alexandre Ghiti wrote:
> Add 2 early command line parameters that allow to downgrade satp mode
> (using the same naming as x86):
> - "no5lvl": use a 4-level page table (down from sv57 to sv48)
> - "no4lvl": use a 3-level page table (down from sv57/sv48 to sv39)
> 
> Note that going through the device tree to get the kernel command line
> works with ACPI too since the efi stub creates a device tree anyway with
> the command line.
> 
> In KASAN kernels, we can't use the libfdt that early in the boot process
> since we are not ready to execute instrumented functions. So instead of
> using the "generic" libfdt, we compile our own versions of those functions
> that are not instrumented and that are prefixed so that they do not
> conflict with the generic ones. We also need the non-instrumented versions
> of the string functions and the prefixed versions of memcpy/memmove.
> 
> This is largely inspired by commit aacd149b6238 ("arm64: head: avoid
> relocating the kernel twice for KASLR") from which I removed compilation
> flags that were not relevant to RISC-V at the moment (LTO, SCS, pie).
> 
> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
> Tested-by: Björn Töpel <bjorn@rivosinc.com>
> Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
> ---
>  .../admin-guide/kernel-parameters.txt         |  5 +-
>  arch/riscv/kernel/Makefile                    |  2 +
>  arch/riscv/kernel/pi/Makefile                 | 37 +++++++++++
>  arch/riscv/kernel/pi/cmdline_early.c          | 62 +++++++++++++++++++

+      4 ld.lld: warning: vmlinux.a(arch/riscv/kernel/pi/string.pi.o):(.init.sdata) is being placed in '.init.sdata'

I'm getting 4 new linker warnings with LLVM=1 clang-15 allmodconfig
builds - but I don't really understand this issue.
Is this spurious, and a just consequence of...

> diff --git a/arch/riscv/kernel/pi/Makefile b/arch/riscv/kernel/pi/Makefile
> new file mode 100644
> index 000000000000..4002ed94b6d3
> --- /dev/null
> +++ b/arch/riscv/kernel/pi/Makefile
> @@ -0,0 +1,37 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# This file was copied from arm64/kernel/pi/Makefile.
> +
> +KBUILD_CFLAGS	:= $(subst $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> +		   -Os -DDISABLE_BRANCH_PROFILING $(DISABLE_STACKLEAK_PLUGIN) \
> +		   $(call cc-option,-mbranch-protection=none) \
> +		   -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
> +		   -D__DISABLE_EXPORTS -ffreestanding \
> +		   -fno-asynchronous-unwind-tables -fno-unwind-tables \
> +		   $(call cc-option,-fno-addrsig)
> +
> +CFLAGS_cmdline_early.o += -D__NO_FORTIFY
> +CFLAGS_lib-fdt_ro.o += -D__NO_FORTIFY
> +
> +GCOV_PROFILE	:= n
> +KASAN_SANITIZE	:= n
> +KCSAN_SANITIZE	:= n
> +UBSAN_SANITIZE	:= n
> +KCOV_INSTRUMENT	:= n
> +
> +$(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_ \
> +			       --remove-section=.note.gnu.property \
> +			       --prefix-alloc-sections=.init

...this?

> +$(obj)/%.pi.o: $(obj)/%.o FORCE
> +	$(call if_changed,objcopy)
> +
> +$(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
> +	$(call if_changed_rule,cc_o_c)
> +
> +$(obj)/string.o: $(srctree)/lib/string.c FORCE
> +	$(call if_changed_rule,cc_o_c)
> +
> +$(obj)/ctype.o: $(srctree)/lib/ctype.c FORCE
> +	$(call if_changed_rule,cc_o_c)
> +
> +obj-y		:= cmdline_early.pi.o string.pi.o ctype.pi.o lib-fdt.pi.o lib-fdt_ro.pi.o
> +extra-y		:= $(patsubst %.pi.o,%.o,$(obj-y))

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 161 bytes --]

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2023-02-27 12:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-24 10:02 [PATCH v7 0/1] riscv: Allow to downgrade paging mode from the command line Alexandre Ghiti
2023-02-24 10:02 ` Alexandre Ghiti
2023-02-24 10:02 ` [PATCH v7 1/1] " Alexandre Ghiti
2023-02-24 10:02   ` Alexandre Ghiti
2023-02-27 12:31   ` Conor Dooley [this message]
2023-02-27 12:31     ` Conor Dooley
2023-02-27 12:56     ` Ard Biesheuvel
2023-02-27 12:56       ` Ard Biesheuvel
2023-02-27 13:27       ` Alexandre Ghiti
2023-02-27 13:27         ` Alexandre Ghiti
2023-02-27 13:42         ` Conor Dooley
2023-02-27 13:42           ` Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y/yilORflGv3vXjX@wendy \
    --to=conor.dooley@microchip.com \
    --cc=alexghiti@rivosinc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=ardb@kernel.org \
    --cc=bjorn@kernel.org \
    --cc=bjorn@rivosinc.com \
    --cc=conor@kernel.org \
    --cc=corbet@lwn.net \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=llvm@lists.linux.dev \
    --cc=nathan@kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.