Re: [Intel-gfx] [PATCH 15/15] drm/edid: convert to device specific logging

["Ville Syrjälä" <ville.syrjala@linux.intel.com>]

On Tue, Oct 11, 2022 at 04:49:49PM +0300, Jani Nikula wrote:
> Convert to drm_kms_dbg/drm_err where possible, and unify the rest of the
> debugs to DRM_DEBUG_KMS.
> 
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
>  drivers/gpu/drm/drm_edid.c | 105 ++++++++++++++++++-------------------
>  1 file changed, 50 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 935bdf4e6269..09b0b8337382 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -1979,7 +1979,7 @@ bool drm_edid_block_valid(u8 *_block, int block_num, bool print_bad_edid,
>  
>  	status = edid_block_check(block, is_base_block);
>  	if (status == EDID_BLOCK_HEADER_REPAIR) {
> -		DRM_DEBUG("Fixing EDID header, your hardware may be failing\n");
> +		DRM_DEBUG_KMS("Fixing EDID header, your hardware may be failing\n");
>  		edid_header_fix(block);
>  
>  		/* Retry with fixed header, update status if that worked. */
> @@ -2281,8 +2281,9 @@ int drm_edid_override_connector_update(struct drm_connector *connector)
>  
>  		drm_edid_free(override);
>  
> -		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] adding %d modes via fallback override/firmware EDID\n",
> -			      connector->base.id, connector->name, num_modes);
> +		drm_dbg_kms(connector->dev,
> +			    "[CONNECTOR:%d:%s] adding %d modes via fallback override/firmware EDID\n",
> +			    connector->base.id, connector->name, num_modes);
>  	}
>  
>  	return num_modes;
> @@ -3389,17 +3390,16 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
>  		return NULL;
>  
>  	if (pt->misc & DRM_EDID_PT_STEREO) {
> -		DRM_DEBUG_KMS("stereo mode not supported\n");
> +		drm_dbg_kms(dev, "Stereo mode not supported\n");
>  		return NULL;
>  	}
>  	if (!(pt->misc & DRM_EDID_PT_SEPARATE_SYNC)) {
> -		DRM_DEBUG_KMS("composite sync not supported\n");
> +		drm_dbg_kms(dev, "Composite sync not supported\n");
>  	}
>  
>  	/* it is incorrect if hsync/vsync width is zero */
>  	if (!hsync_pulse_width || !vsync_pulse_width) {
> -		DRM_DEBUG_KMS("Incorrect Detailed timing. "
> -				"Wrong Hsync/Vsync pulse width\n");
> +		drm_dbg_kms(dev, "Incorrect Detailed timing. Wrong Hsync/Vsync pulse width\n");
>  		return NULL;
>  	}
>  
> @@ -4643,7 +4643,7 @@ static int add_hdmi_mode(struct drm_connector *connector, u8 vic)
>  	struct drm_display_mode *newmode;
>  
>  	if (!drm_valid_hdmi_vic(vic)) {
> -		DRM_ERROR("Unknown HDMI VIC: %d\n", vic);
> +		drm_err(connector->dev, "Unknown HDMI VIC: %d\n", vic);

Quit a lot of these could also do the full [CONNECTOR:...] 
thing it seems.

-- 
Ville Syrjälä
Intel