All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Abel Vesa <abel.vesa@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-phy@lists.infradead.org
Subject: Re: [PATCH 03/10] phy: qcom-qmp-ufs: Add SM8550 support
Date: Thu, 24 Nov 2022 23:25:44 +0530	[thread overview]
Message-ID: <Y3+wIOQqH0uWx4TU@matsya> (raw)
In-Reply-To: <20221116120157.2706810-4-abel.vesa@linaro.org>

On 16-11-22, 14:01, Abel Vesa wrote:
> Add SM8550 specific register layout and table configs.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 91 +++++++++++++++++++++++++
>  1 file changed, 91 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index 189103d1bd18..14cb716752e6 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -96,6 +96,13 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
>  	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL,
>  };
>  
> +static const unsigned int sm8550_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> +	[QPHY_START_CTRL]		= QPHY_V6_PCS_UFS_PHY_START,
> +	[QPHY_PCS_READY_STATUS]		= QPHY_V6_PCS_UFS_READY_STATUS,
> +	[QPHY_SW_RESET]			= QPHY_V6_PCS_UFS_SW_RESET,
> +	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL,
> +};
> +
>  static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
>  	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
>  	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> @@ -520,6 +527,65 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
>  	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
>  };
>  
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};

Unused?

> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
> +
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60),
> +
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60),
> +
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B3, 0x9e),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = {
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
>  struct qmp_ufs_offsets {
>  	u16 serdes;
>  	u16 pcs;
> @@ -613,6 +679,10 @@ static const char * const sm8450_ufs_phy_clk_l[] = {
>  	"qref", "ref", "ref_aux",
>  };
>  
> +static const char * const sm8550_ufs_phy_clk_l[] = {
> +	"qref", "ref",
> +};
> +
>  static const char * const sdm845_ufs_phy_clk_l[] = {
>  	"ref", "ref_aux",
>  };
> @@ -766,6 +836,24 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
>  	.regs			= sm8150_ufsphy_regs_layout,
>  };
>  
> +static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
> +	.lanes			= 2,
> +
> +	.serdes_tbl		= sm8550_ufsphy_serdes,
> +	.serdes_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_serdes),
> +	.tx_tbl			= sm8550_ufsphy_tx,
> +	.tx_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_tx),
> +	.rx_tbl			= sm8550_ufsphy_rx,
> +	.rx_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_rx),
> +	.pcs_tbl		= sm8550_ufsphy_pcs,
> +	.pcs_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_pcs),
> +	.clk_list		= sm8550_ufs_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(sm8550_ufs_phy_clk_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= sm8550_ufsphy_regs_layout,
> +};
> +
>  static void qmp_ufs_configure_lane(void __iomem *base,
>  					const struct qmp_phy_init_tbl tbl[],
>  					int num,
> @@ -1189,6 +1277,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
>  	}, {
>  		.compatible = "qcom,sm8450-qmp-ufs-phy",
>  		.data = &sm8450_ufsphy_cfg,
> +	}, {
> +		.compatible = "qcom,sm8550-qmp-ufs-phy",
> +		.data = &sm8550_ufsphy_cfg,
>  	},
>  	{ },
>  };
> -- 
> 2.34.1

-- 
~Vinod

WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Abel Vesa <abel.vesa@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-phy@lists.infradead.org
Subject: Re: [PATCH 03/10] phy: qcom-qmp-ufs: Add SM8550 support
Date: Thu, 24 Nov 2022 23:25:44 +0530	[thread overview]
Message-ID: <Y3+wIOQqH0uWx4TU@matsya> (raw)
In-Reply-To: <20221116120157.2706810-4-abel.vesa@linaro.org>

On 16-11-22, 14:01, Abel Vesa wrote:
> Add SM8550 specific register layout and table configs.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 91 +++++++++++++++++++++++++
>  1 file changed, 91 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index 189103d1bd18..14cb716752e6 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -96,6 +96,13 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
>  	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL,
>  };
>  
> +static const unsigned int sm8550_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
> +	[QPHY_START_CTRL]		= QPHY_V6_PCS_UFS_PHY_START,
> +	[QPHY_PCS_READY_STATUS]		= QPHY_V6_PCS_UFS_READY_STATUS,
> +	[QPHY_SW_RESET]			= QPHY_V6_PCS_UFS_SW_RESET,
> +	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL,
> +};
> +
>  static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = {
>  	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e),
>  	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
> @@ -520,6 +527,65 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = {
>  	QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
>  };
>  
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99),
> +	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
> +};

Unused?

> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = {
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0f),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
> +
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60),
> +
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60),
> +
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B3, 0x9e),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36),
> +	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
> +};
> +
> +static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = {
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
> +	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
> +};
> +
>  struct qmp_ufs_offsets {
>  	u16 serdes;
>  	u16 pcs;
> @@ -613,6 +679,10 @@ static const char * const sm8450_ufs_phy_clk_l[] = {
>  	"qref", "ref", "ref_aux",
>  };
>  
> +static const char * const sm8550_ufs_phy_clk_l[] = {
> +	"qref", "ref",
> +};
> +
>  static const char * const sdm845_ufs_phy_clk_l[] = {
>  	"ref", "ref_aux",
>  };
> @@ -766,6 +836,24 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = {
>  	.regs			= sm8150_ufsphy_regs_layout,
>  };
>  
> +static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
> +	.lanes			= 2,
> +
> +	.serdes_tbl		= sm8550_ufsphy_serdes,
> +	.serdes_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_serdes),
> +	.tx_tbl			= sm8550_ufsphy_tx,
> +	.tx_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_tx),
> +	.rx_tbl			= sm8550_ufsphy_rx,
> +	.rx_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_rx),
> +	.pcs_tbl		= sm8550_ufsphy_pcs,
> +	.pcs_tbl_num		= ARRAY_SIZE(sm8550_ufsphy_pcs),
> +	.clk_list		= sm8550_ufs_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(sm8550_ufs_phy_clk_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= sm8550_ufsphy_regs_layout,
> +};
> +
>  static void qmp_ufs_configure_lane(void __iomem *base,
>  					const struct qmp_phy_init_tbl tbl[],
>  					int num,
> @@ -1189,6 +1277,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
>  	}, {
>  		.compatible = "qcom,sm8450-qmp-ufs-phy",
>  		.data = &sm8450_ufsphy_cfg,
> +	}, {
> +		.compatible = "qcom,sm8550-qmp-ufs-phy",
> +		.data = &sm8550_ufsphy_cfg,
>  	},
>  	{ },
>  };
> -- 
> 2.34.1

-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2022-11-24 17:56 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-16 12:01 [PATCH 00/10] phy: qualcomm: Add support for SM8550 Abel Vesa
2022-11-16 12:01 ` Abel Vesa
2022-11-16 12:01 ` [PATCH 01/10] phy: qcom-qmp: qserdes-com: Add v6 register offsets Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-24 17:54   ` Vinod Koul
2022-11-24 17:54     ` Vinod Koul
2022-11-16 12:01 ` [PATCH 02/10] dt-bindings: phy: Add QMP UFS PHY comptible for SM8550 Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-16 13:46   ` Johan Hovold
2022-11-16 13:46     ` Johan Hovold
2022-11-16 12:01 ` [PATCH 03/10] phy: qcom-qmp-ufs: Add SM8550 support Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-17 15:36   ` kernel test robot
2022-11-17 15:36     ` kernel test robot
2022-11-24 17:55   ` Vinod Koul [this message]
2022-11-24 17:55     ` Vinod Koul
2022-11-16 12:01 ` [PATCH 04/10] dt-bindings: phy: qcom,qmp-usb: Document SM8550 compatible Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-16 13:46   ` Johan Hovold
2022-11-16 13:46     ` Johan Hovold
2023-01-23 10:19     ` Johan Hovold
2023-01-23 10:19       ` Johan Hovold
2023-01-23 10:48       ` Abel Vesa
2023-01-23 10:48         ` Abel Vesa
2023-01-23 10:49         ` Johan Hovold
2023-01-23 10:49           ` Johan Hovold
2022-11-16 12:01 ` [PATCH 05/10] phy: qualcomm: qmp-usb: Add support for SM8550 Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-17 16:17   ` kernel test robot
2022-11-17 16:17     ` kernel test robot
2022-11-24 17:56   ` Vinod Koul
2022-11-24 17:56     ` Vinod Koul
2022-11-16 12:01 ` [PATCH 06/10] dt-bindings: phy: qcom,qmp-pcie: Document SM8550 compatible Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-16 13:47   ` Johan Hovold
2022-11-16 13:47     ` Johan Hovold
2022-11-16 12:01 ` [PATCH 07/10] phy: qualcomm: qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2023-01-01 20:15   ` Dmitry Baryshkov
2023-01-01 20:15     ` Dmitry Baryshkov
2023-01-17 13:57     ` Abel Vesa
2023-01-17 13:57       ` Abel Vesa
2023-01-17 14:08       ` Dmitry Baryshkov
2023-01-17 14:08         ` Dmitry Baryshkov
2022-11-16 12:01 ` [PATCH 08/10] dt-bindings: phy: Add qcom,snps-eusb2-phy schema file Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-16 15:29   ` Rob Herring
2022-11-16 15:29     ` Rob Herring
2022-11-16 15:44   ` Rob Herring
2022-11-16 15:44     ` Rob Herring
2022-11-16 12:01 ` [PATCH 09/10] phy: qualcomm: Add QCOM SNPS eUSB2 driver Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-24 18:01   ` Vinod Koul
2022-11-24 18:01     ` Vinod Koul
2022-11-16 12:01 ` [PATCH 10/10] phy: qualcomm: phy-qcom-snps-eusb2: Add support for eUSB2 repeater Abel Vesa
2022-11-16 12:01   ` Abel Vesa
2022-11-17  1:43   ` kernel test robot
2022-11-17  1:43     ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y3+wIOQqH0uWx4TU@matsya \
    --to=vkoul@kernel.org \
    --cc=abel.vesa@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.