Re: [PATCH v4 0/3] Enable initial support for StarFive VisionFive V1 SBC

[Conor Dooley <conor@kernel.org>]

On Tue, Oct 18, 2022 at 12:05:39AM +0300, Cristian Ciocaltea wrote:
> The StarFive VisionFive V1 SBC [1] is similar with the already supported
> BeagleV Starlight Beta board, both being based on the StarFive JH7100 SoC.
> 
> In addition to documenting the necessary compatibles, this patch series 
> moves most of the content from jh7100-beaglev-starlight.dts to a new file
> jh7100-common.dtsi, to be shared between the two boards.
> 
> No other changes are required in order to successfully boot the board.
> 
> [1] https://github.com/starfive-tech/VisionFive

Hey Cristian,

Apologies for the delay here, we've been sorting out re-routing RISC-V
DT stuff via the SoC tree. That should be sorted now, so I have picked
the series up. Should be at:
https://git.kernel.org/conor/c/a3fe69160c7328a284ebc711ccb689f3beec42dc

Thanks,
Conor.

> 
> Changes in v4:
>  - Rebased onto v6.1.0-rc1
>  - Fixed a conflict in patch 2/3 as pinctrl-starfive.h has been renamed
>    to pinctrl-starfive-jh7100.h
> 
> Changes in v3:
>  - Added Reviewed-by tag from Krzysztof in patch 1/3
>  - Optimized patch 2/3 by enabling copy detection on "git format-patch",
>    as indicated by Krzysztof
> 
> Changes in v2:
>  - Simplified documentation by using 'enum' instead of 'const' in 
>    patch 1/3, according to Conor's review
>  - Added Reviewed-by tags from Conor
> 
> Cristian Ciocaltea (3):
>   dt-bindings: riscv: starfive: Add StarFive VisionFive V1 board
>   riscv: dts: starfive: Add common DT for JH7100 based boards
>   riscv: dts: starfive: Add StarFive VisionFive V1 device tree
> 
>  .../devicetree/bindings/riscv/starfive.yaml   |   4 +-
>  arch/riscv/boot/dts/starfive/Makefile         |   2 +-
>  .../dts/starfive/jh7100-beaglev-starlight.dts | 153 +-----------------
>  ...aglev-starlight.dts => jh7100-common.dtsi} |   3 -
>  .../jh7100-starfive-visionfive-v1.dts         |  20 +++
>  5 files changed, 25 insertions(+), 157 deletions(-)
>  copy arch/riscv/boot/dts/starfive/{jh7100-beaglev-starlight.dts => jh7100-common.dtsi} (96%)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
> 
> 
> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780
> -- 
> 2.38.0
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv