* [PATCH 2/3] wifi: mt76: mt7915: enable .sta_set_txpwr support
2022-11-20 19:51 [PATCH 1/3] wifi: mt76: mt7915: add basedband Txpower info into debugfs Ryder Lee
@ 2022-11-20 19:51 ` Ryder Lee
2022-11-20 21:21 ` Lorenzo Bianconi
2022-11-20 19:51 ` [PATCH 3/3] wifi: mt76: mt7915: fix band_idx usage Ryder Lee
1 sibling, 1 reply; 5+ messages in thread
From: Ryder Lee @ 2022-11-20 19:51 UTC (permalink / raw)
To: Felix Fietkau, linux-wireless
Cc: Lorenzo Bianconi, Shayne Chen, Evelyn Tsai, linux-mediatek,
Ryder Lee
This adds support for adjusting the Txpower level while pushing
traffic to an associated station. The allowed range is from 0 to
the maximum power of channel.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
.../net/wireless/mediatek/mt76/mt7915/init.c | 3 +
.../net/wireless/mediatek/mt76/mt7915/main.c | 33 +++++++
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 92 +++++++++++++++++--
.../net/wireless/mediatek/mt76/mt7915/mcu.h | 8 ++
.../wireless/mediatek/mt76/mt7915/mt7915.h | 4 +
5 files changed, 134 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index b48c2ba9273d..79bd7bf93f33 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -355,6 +355,9 @@ mt7915_init_wiphy(struct ieee80211_hw *hw)
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_DISCOVERY);
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT);
+ if (!is_mt7915(&dev->mt76))
+ wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_STA_TX_PWR);
+
if (!mdev->dev->of_node ||
!of_property_read_bool(mdev->dev->of_node,
"mediatek,disable-radar-background"))
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index a29cbdb47801..9792831090c7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -1126,6 +1126,38 @@ static void mt7915_sta_set_decap_offload(struct ieee80211_hw *hw,
mt76_connac_mcu_wtbl_update_hdr_trans(&dev->mt76, vif, sta);
}
+static int mt7915_sta_set_txpwr(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct mt7915_phy *phy = mt7915_hw_phy(hw);
+ struct mt7915_dev *dev = mt7915_hw_dev(hw);
+ s16 txpower = sta->deflink.txpwr.power;
+ int ret;
+
+ if (sta->deflink.txpwr.type == NL80211_TX_POWER_AUTOMATIC)
+ txpower = 0;
+
+ mutex_lock(&dev->mt76.mutex);
+
+ /* NOTE: temporarily use 0 as minimum limit, which is a
+ * global setting and will be applied to all stations.
+ */
+ ret = mt7915_mcu_set_txpower_frame_min(phy, 0);
+ if (ret)
+ return ret;
+
+ /* This only applies to data frames while pushing traffic,
+ * whereas the management frames or other packets that are
+ * using fixed rate can be configured via TxD.
+ */
+ ret = mt7915_mcu_set_txpower_frame(phy, vif, sta, txpower);
+
+ mutex_unlock(&dev->mt76.mutex);
+
+ return ret;
+}
+
static const char mt7915_gstrings_stats[][ETH_GSTRING_LEN] = {
"tx_ampdu_cnt",
"tx_stop_q_empty_cnt",
@@ -1491,6 +1523,7 @@ const struct ieee80211_ops mt7915_ops = {
.set_bitrate_mask = mt7915_set_bitrate_mask,
.set_coverage_class = mt7915_set_coverage_class,
.sta_statistics = mt7915_sta_statistics,
+ .sta_set_txpwr = mt7915_sta_set_txpwr,
.sta_set_4addr = mt7915_sta_set_4addr,
.sta_set_decap_offload = mt7915_sta_set_decap_offload,
.add_twt_setup = mt7915_mac_add_twt_setup,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 3a0d97dad96f..d911512f31a6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -3083,6 +3083,86 @@ int mt7915_mcu_set_thermal_throttling(struct mt7915_phy *phy, u8 state)
&req, sizeof(req), false);
}
+int mt7915_mcu_set_txpower_frame_min(struct mt7915_phy *phy, s8 txpower)
+{
+ struct mt7915_dev *dev = phy->dev;
+ struct {
+ u8 format_id;
+ u8 rsv;
+ u8 band_idx;
+ s8 txpower_min;
+ } __packed req = {
+ .format_id = TX_POWER_LIMIT_FRAME_MIN,
+ .band_idx = phy != &dev->phy,
+ .txpower_min = txpower * 2, /* 0.5db */
+ };
+
+ return mt76_mcu_send_msg(&dev->mt76,
+ MCU_EXT_CMD(TX_POWER_FEATURE_CTRL), &req,
+ sizeof(req), true);
+}
+
+int mt7915_mcu_set_txpower_frame(struct mt7915_phy *phy,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, s8 txpower)
+{
+ struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
+ struct mt7915_dev *dev = phy->dev;
+ struct {
+ u8 format_id;
+ u8 rsv[3];
+ u8 band_idx;
+ s8 txpower_max;
+ __le16 wcid;
+ s8 txpower_offs[48];
+ } __packed req = {
+ .format_id = TX_POWER_LIMIT_FRAME,
+ .band_idx = phy != &dev->phy,
+ .txpower_max = DIV_ROUND_UP(phy->mt76->txpower_cur, 2),
+ .wcid = cpu_to_le16(msta->wcid.idx),
+ };
+ int ret;
+ s8 txpower_sku[MT7915_SKU_RATE_NUM];
+
+ ret = mt7915_mcu_get_txpower_sku(phy, txpower_sku, sizeof(txpower_sku));
+ if (ret)
+ return ret;
+
+ if (txpower > req.txpower_max || txpower < 0)
+ return -EINVAL;
+
+ if (txpower) {
+ u32 offs, len, i;
+
+ if (sta->deflink.ht_cap.ht_supported) {
+ const u8 *sku_len = mt7915_sku_group_len;
+
+ offs = sku_len[SKU_CCK] + sku_len[SKU_OFDM];
+ len = sku_len[SKU_HT_BW20] + sku_len[SKU_HT_BW40];
+
+ if (sta->deflink.vht_cap.vht_supported) {
+ offs += len;
+ len = sku_len[SKU_VHT_BW20] * 4;
+
+ if (sta->deflink.he_cap.has_he) {
+ offs += len + sku_len[SKU_HE_RU26] * 3;
+ len = sku_len[SKU_HE_RU242] * 4;
+ }
+ }
+ } else {
+ return -EINVAL;
+ }
+
+ for (i = 0; i < len; i++, offs++)
+ req.txpower_offs[i] =
+ txpower - DIV_ROUND_UP(txpower_sku[offs], 2);
+ }
+
+ return mt76_mcu_send_msg(&dev->mt76,
+ MCU_EXT_CMD(TX_POWER_FEATURE_CTRL), &req,
+ sizeof(req), true);
+}
+
int mt7915_mcu_set_txpower_sku(struct mt7915_phy *phy)
{
struct mt7915_dev *dev = phy->dev;
@@ -3094,7 +3174,7 @@ int mt7915_mcu_set_txpower_sku(struct mt7915_phy *phy)
u8 dbdc_idx;
s8 val[MT7915_SKU_RATE_NUM];
} __packed req = {
- .format_id = 4,
+ .format_id = TX_POWER_LIMIT_TABLE,
.dbdc_idx = phy != &dev->phy,
};
struct mt76_power_limits limits_array;
@@ -3144,11 +3224,11 @@ int mt7915_mcu_get_txpower_sku(struct mt7915_phy *phy, s8 *txpower, int len)
u8 band;
u8 _rsv;
} __packed req = {
- .format_id = 7,
+ .format_id = TX_POWER_LIMIT_INFO,
.category = RATE_POWER_INFO,
.band = phy != &dev->phy,
};
- s8 res[MT7915_SKU_RATE_NUM][2];
+ s8 txpower_sku[MT7915_SKU_RATE_NUM][2];
struct sk_buff *skb;
int ret, i;
@@ -3158,9 +3238,9 @@ int mt7915_mcu_get_txpower_sku(struct mt7915_phy *phy, s8 *txpower, int len)
if (ret)
return ret;
- memcpy(res, skb->data + 4, sizeof(res));
+ memcpy(txpower_sku, skb->data + 4, sizeof(txpower_sku));
for (i = 0; i < len; i++)
- txpower[i] = res[i][req.band];
+ txpower[i] = txpower_sku[i][req.band_idx];
dev_kfree_skb(skb);
@@ -3198,7 +3278,7 @@ int mt7915_mcu_set_sku_en(struct mt7915_phy *phy, bool enable)
u8 dbdc_idx;
u8 rsv;
} __packed req = {
- .format_id = 0,
+ .format_id = TX_POWER_LIMIT_ENABLE,
.dbdc_idx = phy != &dev->phy,
.sku_enable = enable,
};
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
index 2fc09fd53777..46c517e50ae4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
@@ -419,6 +419,14 @@ enum {
#define RATE_CFG_PHY_TYPE GENMASK(27, 24)
#define RATE_CFG_HE_LTF GENMASK(31, 28)
+enum {
+ TX_POWER_LIMIT_ENABLE,
+ TX_POWER_LIMIT_TABLE = 0x4,
+ TX_POWER_LIMIT_INFO = 0x7,
+ TX_POWER_LIMIT_FRAME = 0x11,
+ TX_POWER_LIMIT_FRAME_MIN = 0x12,
+};
+
enum {
SPR_ENABLE = 0x1,
SPR_ENABLE_SD = 0x3,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
index 0bad78cf32c7..015c7190d79f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
@@ -526,6 +526,10 @@ int mt7915_mcu_set_ser(struct mt7915_dev *dev, u8 action, u8 set, u8 band);
int mt7915_mcu_set_sku_en(struct mt7915_phy *phy, bool enable);
int mt7915_mcu_set_txpower_sku(struct mt7915_phy *phy);
int mt7915_mcu_get_txpower_sku(struct mt7915_phy *phy, s8 *txpower, int len);
+int mt7915_mcu_set_txpower_frame_min(struct mt7915_phy *phy, s8 txpower);
+int mt7915_mcu_set_txpower_frame(struct mt7915_phy *phy,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, s8 txpower);
int mt7915_mcu_set_txbf(struct mt7915_dev *dev, u8 action);
int mt7915_mcu_set_fcc5_lpn(struct mt7915_dev *dev, int val);
int mt7915_mcu_set_pulse_th(struct mt7915_dev *dev,
--
2.36.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH 3/3] wifi: mt76: mt7915: fix band_idx usage
2022-11-20 19:51 [PATCH 1/3] wifi: mt76: mt7915: add basedband Txpower info into debugfs Ryder Lee
2022-11-20 19:51 ` [PATCH 2/3] wifi: mt76: mt7915: enable .sta_set_txpwr support Ryder Lee
@ 2022-11-20 19:51 ` Ryder Lee
1 sibling, 0 replies; 5+ messages in thread
From: Ryder Lee @ 2022-11-20 19:51 UTC (permalink / raw)
To: Felix Fietkau, linux-wireless
Cc: Lorenzo Bianconi, Shayne Chen, Evelyn Tsai, linux-mediatek,
Ryder Lee
The commit 006b9d4ad5bf introduced phy->band_idx to accommodate the
band definition change for mt7986 so that the band_idx of main_phy
can be 0 or 1. Accordingly, the source of band_idx 1 has switched to
"phy != &dev->phy" or "dev->phy.band_idx = 1".
We still use ext_phy to represent band 1 somewhere in driver, so fix it.
Also, band_idx sounds more reasonable than dbdc_idx, so change it.
Fixes: 006b9d4ad5bf ("mt76: mt7915: introduce band_idx in mt7915_phy")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
.../wireless/mediatek/mt76/mt7915/debugfs.c | 10 ++---
.../net/wireless/mediatek/mt76/mt7915/mac.c | 13 +++---
.../net/wireless/mediatek/mt76/mt7915/main.c | 36 +++++++--------
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 44 +++++++++----------
.../wireless/mediatek/mt76/mt7915/testmode.c | 18 ++++----
5 files changed, 60 insertions(+), 61 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
index 1244f5c4172b..f6069a858927 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
@@ -51,7 +51,7 @@ mt7915_sys_recovery_set(struct file *file, const char __user *user_buf,
{
struct mt7915_phy *phy = file->private_data;
struct mt7915_dev *dev = phy->dev;
- bool ext_phy = phy != &dev->phy;
+ bool band = phy->band_idx;
char buf[16];
int ret = 0;
u16 val;
@@ -83,7 +83,7 @@ mt7915_sys_recovery_set(struct file *file, const char __user *user_buf,
* 8: trigger firmware crash.
*/
case SER_QUERY:
- ret = mt7915_mcu_set_ser(dev, 0, 0, ext_phy);
+ ret = mt7915_mcu_set_ser(dev, 0, 0, band);
break;
case SER_SET_RECOVER_L1:
case SER_SET_RECOVER_L2:
@@ -91,17 +91,17 @@ mt7915_sys_recovery_set(struct file *file, const char __user *user_buf,
case SER_SET_RECOVER_L3_TX_ABORT:
case SER_SET_RECOVER_L3_TX_DISABLE:
case SER_SET_RECOVER_L3_BF:
- ret = mt7915_mcu_set_ser(dev, SER_ENABLE, BIT(val), ext_phy);
+ ret = mt7915_mcu_set_ser(dev, SER_ENABLE, BIT(val), band);
if (ret)
return ret;
- ret = mt7915_mcu_set_ser(dev, SER_RECOVER, val, ext_phy);
+ ret = mt7915_mcu_set_ser(dev, SER_RECOVER, val, band);
break;
/* enable full chip reset */
case SER_SET_RECOVER_FULL:
mt76_set(dev, MT_WFDMA0_MCU_HOST_INT_ENA, MT_MCU_CMD_WDT_MASK);
- ret = mt7915_mcu_set_ser(dev, 1, 3, ext_phy);
+ ret = mt7915_mcu_set_ser(dev, 1, 3, band);
if (ret)
return ret;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 117ddb00348c..6cd8930a10f2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1228,18 +1228,18 @@ void mt7915_mac_set_timing(struct mt7915_phy *phy)
MT_ARB_SCR_TX_DISABLE | MT_ARB_SCR_RX_DISABLE);
}
-void mt7915_mac_enable_nf(struct mt7915_dev *dev, bool ext_phy)
+void mt7915_mac_enable_nf(struct mt7915_dev *dev, bool band)
{
u32 reg;
- reg = is_mt7915(&dev->mt76) ? MT_WF_PHY_RXTD12(ext_phy) :
- MT_WF_PHY_RXTD12_MT7916(ext_phy);
+ reg = is_mt7915(&dev->mt76) ? MT_WF_PHY_RXTD12(band) :
+ MT_WF_PHY_RXTD12_MT7916(band);
mt76_set(dev, reg,
MT_WF_PHY_RXTD12_IRPI_SW_CLR_ONLY |
MT_WF_PHY_RXTD12_IRPI_SW_CLR);
- reg = is_mt7915(&dev->mt76) ? MT_WF_PHY_RX_CTRL1(ext_phy) :
- MT_WF_PHY_RX_CTRL1_MT7916(ext_phy);
+ reg = is_mt7915(&dev->mt76) ? MT_WF_PHY_RX_CTRL1(band) :
+ MT_WF_PHY_RX_CTRL1_MT7916(band);
mt76_set(dev, reg, FIELD_PREP(MT_WF_PHY_RX_CTRL1_IPI_EN, 0x5));
}
@@ -1948,7 +1948,6 @@ void mt7915_mac_update_stats(struct mt7915_phy *phy)
static void mt7915_mac_severe_check(struct mt7915_phy *phy)
{
struct mt7915_dev *dev = phy->dev;
- bool ext_phy = phy != &dev->phy;
u32 trb;
if (!phy->omac_mask)
@@ -1966,7 +1965,7 @@ static void mt7915_mac_severe_check(struct mt7915_phy *phy)
FIELD_GET(MT_TRB_RXPSR0_RX_WTBL_PTR, phy->trb_ts)) &&
trb == phy->trb_ts)
mt7915_mcu_set_ser(dev, SER_RECOVER, SER_SET_RECOVER_L3_RX_ABORT,
- ext_phy);
+ phy->band_idx);
phy->trb_ts = trb;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 9792831090c7..e6315ca16308 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -30,31 +30,31 @@ int mt7915_run(struct ieee80211_hw *hw)
running = mt7915_dev_running(dev);
if (!running) {
- ret = mt76_connac_mcu_set_pm(&dev->mt76, 0, 0);
+ ret = mt76_connac_mcu_set_pm(&dev->mt76, dev->phy.band_idx, 0);
if (ret)
goto out;
- ret = mt7915_mcu_set_mac(dev, 0, true, true);
+ ret = mt7915_mcu_set_mac(dev, dev->phy.band_idx, true, true);
if (ret)
goto out;
- mt7915_mac_enable_nf(dev, 0);
+ mt7915_mac_enable_nf(dev, dev->phy.band_idx);
}
- if (phy != &dev->phy || phy->band_idx) {
- ret = mt76_connac_mcu_set_pm(&dev->mt76, 1, 0);
+ if (phy != &dev->phy) {
+ ret = mt76_connac_mcu_set_pm(&dev->mt76, phy->band_idx, 0);
if (ret)
goto out;
- ret = mt7915_mcu_set_mac(dev, 1, true, true);
+ ret = mt7915_mcu_set_mac(dev, phy->band_idx, true, true);
if (ret)
goto out;
- mt7915_mac_enable_nf(dev, 1);
+ mt7915_mac_enable_nf(dev, phy->band_idx);
}
ret = mt76_connac_mcu_set_rts_thresh(&dev->mt76, 0x92b,
- phy != &dev->phy);
+ phy->band_idx);
if (ret)
goto out;
@@ -107,13 +107,13 @@ static void mt7915_stop(struct ieee80211_hw *hw)
clear_bit(MT76_STATE_RUNNING, &phy->mt76->state);
if (phy != &dev->phy) {
- mt76_connac_mcu_set_pm(&dev->mt76, 1, 1);
- mt7915_mcu_set_mac(dev, 1, false, false);
+ mt76_connac_mcu_set_pm(&dev->mt76, phy->band_idx, 1);
+ mt7915_mcu_set_mac(dev, phy->band_idx, false, false);
}
if (!mt7915_dev_running(dev)) {
- mt76_connac_mcu_set_pm(&dev->mt76, 0, 1);
- mt7915_mcu_set_mac(dev, 0, false, false);
+ mt76_connac_mcu_set_pm(&dev->mt76, dev->phy.band_idx, 1);
+ mt7915_mcu_set_mac(dev, dev->phy.band_idx, false, false);
}
mutex_unlock(&dev->mt76.mutex);
@@ -440,7 +440,6 @@ static int mt7915_config(struct ieee80211_hw *hw, u32 changed)
{
struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mt7915_phy *phy = mt7915_hw_phy(hw);
- bool band = phy != &dev->phy;
int ret;
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
@@ -468,6 +467,7 @@ static int mt7915_config(struct ieee80211_hw *hw, u32 changed)
if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
bool enabled = !!(hw->conf.flags & IEEE80211_CONF_MONITOR);
+ bool band = phy->band_idx;
if (!enabled)
phy->rxfilter |= MT_WF_RFCR_DROP_OTHER_UC;
@@ -506,7 +506,7 @@ static void mt7915_configure_filter(struct ieee80211_hw *hw,
{
struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mt7915_phy *phy = mt7915_hw_phy(hw);
- bool band = phy != &dev->phy;
+ bool band = phy->band_idx;
u32 ctl_flags = MT_WF_RFCR1_DROP_ACK |
MT_WF_RFCR1_DROP_BF_POLL |
MT_WF_RFCR1_DROP_BA |
@@ -743,7 +743,7 @@ static int mt7915_set_rts_threshold(struct ieee80211_hw *hw, u32 val)
int ret;
mutex_lock(&dev->mt76.mutex);
- ret = mt76_connac_mcu_set_rts_thresh(&dev->mt76, val, phy != &dev->phy);
+ ret = mt76_connac_mcu_set_rts_thresh(&dev->mt76, val, phy->band_idx);
mutex_unlock(&dev->mt76.mutex);
return ret;
@@ -846,7 +846,7 @@ u64 __mt7915_get_tsf(struct ieee80211_hw *hw, struct mt7915_vif *mvif)
{
struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mt7915_phy *phy = mt7915_hw_phy(hw);
- bool band = phy != &dev->phy;
+ bool band = phy->band_idx;
union {
u64 t64;
u32 t32[2];
@@ -891,7 +891,7 @@ mt7915_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mt7915_phy *phy = mt7915_hw_phy(hw);
- bool band = phy != &dev->phy;
+ bool band = phy->band_idx;
union {
u64 t64;
u32 t32[2];
@@ -922,7 +922,7 @@ mt7915_offset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct mt7915_vif *mvif = (struct mt7915_vif *)vif->drv_priv;
struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mt7915_phy *phy = mt7915_hw_phy(hw);
- bool band = phy != &dev->phy;
+ bool band = phy->band_idx;
union {
u64 t64;
u32 t32[2];
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index d911512f31a6..9e977684a61d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -599,7 +599,7 @@ mt7915_mcu_muar_config(struct mt7915_phy *phy, struct ieee80211_vif *vif,
.mode = !!mask || enable,
.entry_count = 1,
.write = 1,
- .band = phy != &dev->phy,
+ .band = phy->band_idx,
.index = idx * 2 + bssid,
};
@@ -1693,7 +1693,7 @@ int mt7915_mcu_add_dev_info(struct mt7915_phy *phy,
struct {
struct req_hdr {
u8 omac_idx;
- u8 dbdc_idx;
+ u8 band_idx;
__le16 tlv_num;
u8 is_tlv_append;
u8 rsv[3];
@@ -1702,13 +1702,13 @@ int mt7915_mcu_add_dev_info(struct mt7915_phy *phy,
__le16 tag;
__le16 len;
u8 active;
- u8 dbdc_idx;
+ u8 band_idx;
u8 omac_addr[ETH_ALEN];
} __packed tlv;
} data = {
.hdr = {
.omac_idx = mvif->mt76.omac_idx,
- .dbdc_idx = mvif->mt76.band_idx,
+ .band_idx = mvif->mt76.band_idx,
.tlv_num = cpu_to_le16(1),
.is_tlv_append = 1,
},
@@ -1716,7 +1716,7 @@ int mt7915_mcu_add_dev_info(struct mt7915_phy *phy,
.tag = cpu_to_le16(DEV_INFO_ACTIVE),
.len = cpu_to_le16(sizeof(struct req_tlv)),
.active = enable,
- .dbdc_idx = mvif->mt76.band_idx,
+ .band_idx = mvif->mt76.band_idx,
},
};
@@ -2563,7 +2563,7 @@ mt7915_mcu_background_chain_ctrl(struct mt7915_phy *phy,
req.monitor_central_chan =
ieee80211_frequency_to_channel(chandef->center_freq1);
req.monitor_bw = mt76_connac_chan_bw(chandef);
- req.band_idx = phy != &dev->phy;
+ req.band_idx = phy->band_idx;
req.scan_mode = 1;
break;
}
@@ -2571,7 +2571,7 @@ mt7915_mcu_background_chain_ctrl(struct mt7915_phy *phy,
req.monitor_chan = chandef->chan->hw_value;
req.monitor_central_chan =
ieee80211_frequency_to_channel(chandef->center_freq1);
- req.band_idx = phy != &dev->phy;
+ req.band_idx = phy->band_idx;
req.scan_mode = 2;
break;
case CH_SWITCH_BACKGROUND_SCAN_STOP:
@@ -2975,7 +2975,7 @@ int mt7915_mcu_get_chan_mib_info(struct mt7915_phy *phy, bool chan_switch)
}
for (i = 0; i < 5; i++) {
- req[i].band = cpu_to_le32(phy != &dev->phy);
+ req[i].band = cpu_to_le32(phy->band_idx);
req[i].offs = cpu_to_le32(offs[i + start]);
if (!is_mt7915(&dev->mt76) && i == 3)
@@ -3020,11 +3020,11 @@ int mt7915_mcu_get_temperature(struct mt7915_phy *phy)
struct {
u8 ctrl_id;
u8 action;
- u8 dbdc_idx;
+ u8 band_idx;
u8 rsv[5];
} req = {
.ctrl_id = THERMAL_SENSOR_TEMP_QUERY,
- .dbdc_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
};
return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(THERMAL_CTRL), &req,
@@ -3093,7 +3093,7 @@ int mt7915_mcu_set_txpower_frame_min(struct mt7915_phy *phy, s8 txpower)
s8 txpower_min;
} __packed req = {
.format_id = TX_POWER_LIMIT_FRAME_MIN,
- .band_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
.txpower_min = txpower * 2, /* 0.5db */
};
@@ -3117,7 +3117,7 @@ int mt7915_mcu_set_txpower_frame(struct mt7915_phy *phy,
s8 txpower_offs[48];
} __packed req = {
.format_id = TX_POWER_LIMIT_FRAME,
- .band_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
.txpower_max = DIV_ROUND_UP(phy->mt76->txpower_cur, 2),
.wcid = cpu_to_le16(msta->wcid.idx),
};
@@ -3171,11 +3171,11 @@ int mt7915_mcu_set_txpower_sku(struct mt7915_phy *phy)
struct mt7915_sku_val {
u8 format_id;
u8 limit_type;
- u8 dbdc_idx;
+ u8 band_idx;
s8 val[MT7915_SKU_RATE_NUM];
} __packed req = {
.format_id = TX_POWER_LIMIT_TABLE,
- .dbdc_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
};
struct mt76_power_limits limits_array;
s8 *la = (s8 *)&limits_array;
@@ -3221,12 +3221,12 @@ int mt7915_mcu_get_txpower_sku(struct mt7915_phy *phy, s8 *txpower, int len)
struct {
u8 format_id;
u8 category;
- u8 band;
+ u8 band_idx;
u8 _rsv;
} __packed req = {
.format_id = TX_POWER_LIMIT_INFO,
.category = RATE_POWER_INFO,
- .band = phy != &dev->phy,
+ .band_idx = phy->band_idx,
};
s8 txpower_sku[MT7915_SKU_RATE_NUM][2];
struct sk_buff *skb;
@@ -3275,11 +3275,11 @@ int mt7915_mcu_set_sku_en(struct mt7915_phy *phy, bool enable)
struct mt7915_sku {
u8 format_id;
u8 sku_enable;
- u8 dbdc_idx;
+ u8 band_idx;
u8 rsv;
} __packed req = {
.format_id = TX_POWER_LIMIT_ENABLE,
- .dbdc_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
.sku_enable = enable,
};
@@ -3361,7 +3361,7 @@ mt7915_mcu_enable_obss_spr(struct mt7915_phy *phy, u8 action, u8 val)
struct mt7915_mcu_sr_ctrl req = {
.action = action,
.argnum = 1,
- .band_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
.val = cpu_to_le32(val),
};
@@ -3392,7 +3392,7 @@ mt7915_mcu_set_obss_spr_pd(struct mt7915_phy *phy,
.ctrl = {
.action = SPR_SET_PARAM,
.argnum = 9,
- .band_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
},
};
int ret;
@@ -3441,7 +3441,7 @@ mt7915_mcu_set_obss_spr_siga(struct mt7915_phy *phy, struct ieee80211_vif *vif,
.ctrl = {
.action = SPR_SET_SIGA,
.argnum = 1,
- .band_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
},
.siga = {
.omac = omac > HW_BSSID_MAX ? omac - 12 : omac,
@@ -3480,7 +3480,7 @@ mt7915_mcu_set_obss_spr_bitmap(struct mt7915_phy *phy,
.ctrl = {
.action = SPR_SET_SRG_BITMAP,
.argnum = 4,
- .band_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
},
};
u32 bitmap;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
index a979460fad2d..7ace05e0b63b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/testmode.c
@@ -44,14 +44,14 @@ mt7915_tm_set_tx_power(struct mt7915_phy *phy)
int ret;
struct {
u8 format_id;
- u8 dbdc_idx;
+ u8 band_idx;
s8 tx_power;
u8 ant_idx; /* Only 0 is valid */
u8 center_chan;
u8 rsv[3];
} __packed req = {
.format_id = 0xf,
- .dbdc_idx = phy != &dev->phy,
+ .band_idx = phy->band_idx,
.center_chan = ieee80211_frequency_to_channel(freq),
};
u8 *tx_power = NULL;
@@ -77,7 +77,7 @@ mt7915_tm_set_freq_offset(struct mt7915_phy *phy, bool en, u32 val)
struct mt7915_tm_cmd req = {
.testmode_en = en,
.param_idx = MCU_ATE_SET_FREQ_OFFSET,
- .param.freq.band = phy != &dev->phy,
+ .param.freq.band = phy->band_idx,
.param.freq.freq_offset = cpu_to_le32(val),
};
@@ -111,7 +111,7 @@ mt7915_tm_set_trx(struct mt7915_phy *phy, int type, bool en)
.param_idx = MCU_ATE_SET_TRX,
.param.trx.type = type,
.param.trx.enable = en,
- .param.trx.band = phy != &dev->phy,
+ .param.trx.band = phy->band_idx,
};
return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(ATE_CTRL), &req,
@@ -126,7 +126,7 @@ mt7915_tm_clean_hwq(struct mt7915_phy *phy, u8 wcid)
.testmode_en = 1,
.param_idx = MCU_ATE_CLEAN_TXQUEUE,
.param.clean.wcid = wcid,
- .param.clean.band = phy != &dev->phy,
+ .param.clean.band = phy->band_idx,
};
return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(ATE_CTRL), &req,
@@ -144,7 +144,7 @@ mt7915_tm_set_slot_time(struct mt7915_phy *phy, u8 slot_time, u8 sifs)
.param.slot.sifs = sifs,
.param.slot.rifs = 2,
.param.slot.eifs = cpu_to_le16(60),
- .param.slot.band = phy != &dev->phy,
+ .param.slot.band = phy->band_idx,
};
return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD(ATE_CTRL), &req,
@@ -488,7 +488,7 @@ mt7915_tm_set_rx_frames(struct mt7915_phy *phy, bool en)
mt7915_tm_update_channel(phy);
/* read-clear */
- mt76_rr(dev, MT_MIB_SDR3(phy != &dev->phy));
+ mt76_rr(dev, MT_MIB_SDR3(phy->band_idx));
mt7915_tm_set_trx(phy, TM_MAC_RX_RXV, en);
}
}
@@ -526,7 +526,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
tx_cont->control_ch = chandef->chan->hw_value;
tx_cont->center_ch = freq1;
tx_cont->tx_ant = td->tx_antenna_mask;
- tx_cont->band = phy != &dev->phy;
+ tx_cont->band = phy->band_idx;
switch (chandef->width) {
case NL80211_CHAN_WIDTH_40:
@@ -558,7 +558,7 @@ mt7915_tm_set_tx_cont(struct mt7915_phy *phy, bool en)
}
if (!en) {
- req.op.rf.param.func_data = cpu_to_le32(phy != &dev->phy);
+ req.op.rf.param.func_data = cpu_to_le32(phy->band_idx);
goto out;
}
--
2.36.1
^ permalink raw reply related [flat|nested] 5+ messages in thread