[PATCH v4 0/4] Minor SoundWire clean ups

[PATCH v4 0/4] Minor SoundWire clean ups

[Charles Keepax]

Just some minor tidy ups and preparation for starting to upstream some
Cirrus SoundWire devices. The first three patches are pretty trivial,
the last patch which moves the remaining core over to using the no_pm
functions could probably use some careful review.

Changes since v3:
 - Return an error and add a WARN_ONCE if the build stubs are used.

Changes since v2:
 - Fix up a memory leak of a buffer on the error path
 - Added some reviewed by's

Thanks,
Charles

*** BLURB HERE ***

Charles Keepax (3):
  soundwire: Provide build stubs for common functions
  soundwire: debugfs: Switch to sdw_read_no_pm
  soundwire: stream: Move remaining register accesses over to no_pm

Simon Trimmer (1):
  soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions

 drivers/soundwire/bus.c       |  10 ++--
 drivers/soundwire/debugfs.c   |  13 ++++-
 drivers/soundwire/stream.c    |  30 +++++-----
 include/linux/soundwire/sdw.h | 107 ++++++++++++++++++++++++++++++----
 4 files changed, 129 insertions(+), 31 deletions(-)

-- 
2.30.2

[PATCH v4 0/4] Minor SoundWire clean ups

[Charles Keepax]

Just some minor tidy ups and preparation for starting to upstream some
Cirrus SoundWire devices. The first three patches are pretty trivial,
the last patch which moves the remaining core over to using the no_pm
functions could probably use some careful review.

Changes since v3:
 - Return an error and add a WARN_ONCE if the build stubs are used.

Changes since v2:
 - Fix up a memory leak of a buffer on the error path
 - Added some reviewed by's

Thanks,
Charles

*** BLURB HERE ***

Charles Keepax (3):
  soundwire: Provide build stubs for common functions
  soundwire: debugfs: Switch to sdw_read_no_pm
  soundwire: stream: Move remaining register accesses over to no_pm

Simon Trimmer (1):
  soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions

 drivers/soundwire/bus.c       |  10 ++--
 drivers/soundwire/debugfs.c   |  13 ++++-
 drivers/soundwire/stream.c    |  30 +++++-----
 include/linux/soundwire/sdw.h | 107 ++++++++++++++++++++++++++++++----
 4 files changed, 129 insertions(+), 31 deletions(-)

-- 
2.30.2

[PATCH v4 1/4] soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions

[Charles Keepax]

From: Simon Trimmer <simont@opensource.cirrus.com>

The commit 167790abb90f ("soundwire: export sdw_write/read_no_pm
functions") exposed the single byte no_pm versions of the IO functions
that can be used without touching PM, export the multi byte no_pm
versions for the same reason.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No change since v3.

 drivers/soundwire/bus.c       | 8 ++++----
 include/linux/soundwire/sdw.h | 2 ++
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 76515c33e639e..ef4878258afad 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -414,8 +414,7 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
  * all clients need to use the pm versions
  */
 
-static int
-sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 {
 	struct sdw_msg msg;
 	int ret;
@@ -430,9 +429,9 @@ sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 		ret = 0;
 	return ret;
 }
+EXPORT_SYMBOL(sdw_nread_no_pm);
 
-static int
-sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
+int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 {
 	struct sdw_msg msg;
 	int ret;
@@ -447,6 +446,7 @@ sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 		ret = 0;
 	return ret;
 }
+EXPORT_SYMBOL(sdw_nwrite_no_pm);
 
 int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value)
 {
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 9e4537f409c29..902ed46f76c80 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -1047,7 +1047,9 @@ int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
 int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
 int sdw_read_no_pm(struct sdw_slave *slave, u32 addr);
 int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
 int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
+int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
 int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 
-- 
2.30.2

[PATCH v4 1/4] soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions

[Charles Keepax]

From: Simon Trimmer <simont@opensource.cirrus.com>

The commit 167790abb90f ("soundwire: export sdw_write/read_no_pm
functions") exposed the single byte no_pm versions of the IO functions
that can be used without touching PM, export the multi byte no_pm
versions for the same reason.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No change since v3.

 drivers/soundwire/bus.c       | 8 ++++----
 include/linux/soundwire/sdw.h | 2 ++
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 76515c33e639e..ef4878258afad 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -414,8 +414,7 @@ int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave,
  * all clients need to use the pm versions
  */
 
-static int
-sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 {
 	struct sdw_msg msg;
 	int ret;
@@ -430,9 +429,9 @@ sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
 		ret = 0;
 	return ret;
 }
+EXPORT_SYMBOL(sdw_nread_no_pm);
 
-static int
-sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
+int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 {
 	struct sdw_msg msg;
 	int ret;
@@ -447,6 +446,7 @@ sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
 		ret = 0;
 	return ret;
 }
+EXPORT_SYMBOL(sdw_nwrite_no_pm);
 
 int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value)
 {
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 9e4537f409c29..902ed46f76c80 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -1047,7 +1047,9 @@ int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
 int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
 int sdw_read_no_pm(struct sdw_slave *slave, u32 addr);
 int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
+int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val);
 int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
+int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val);
 int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 
-- 
2.30.2

[PATCH v4 2/4] soundwire: Provide build stubs for common functions

[Charles Keepax]

Provide stub functions when CONFIG_SOUNDWIRE is not set for functions
that are quite likely to be used from common code on devices supporting
multiple control buses.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

Changes since v3:
 - Return error code and add WARN_ONCE in build stubs. Note I returned
   EINVAL rather than the discussed ENOSYS since it turns out checkpatch
   informs me I really shouldn't be returning ENOSYS :-)

Thanks,
Charles

 include/linux/soundwire/sdw.h | 105 ++++++++++++++++++++++++++++++----
 1 file changed, 95 insertions(+), 10 deletions(-)

diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 902ed46f76c80..132a0ee97b804 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -4,6 +4,7 @@
 #ifndef __SOUNDWIRE_H
 #define __SOUNDWIRE_H
 
+#include <linux/bug.h>
 #include <linux/mod_devicetable.h>
 #include <linux/bitfield.h>
 
@@ -1021,15 +1022,8 @@ int sdw_stream_add_master(struct sdw_bus *bus,
 		struct sdw_port_config *port_config,
 		unsigned int num_ports,
 		struct sdw_stream_runtime *stream);
-int sdw_stream_add_slave(struct sdw_slave *slave,
-		struct sdw_stream_config *stream_config,
-		struct sdw_port_config *port_config,
-		unsigned int num_ports,
-		struct sdw_stream_runtime *stream);
 int sdw_stream_remove_master(struct sdw_bus *bus,
 		struct sdw_stream_runtime *stream);
-int sdw_stream_remove_slave(struct sdw_slave *slave,
-		struct sdw_stream_runtime *stream);
 int sdw_startup_stream(void *sdw_substream);
 int sdw_prepare_stream(struct sdw_stream_runtime *stream);
 int sdw_enable_stream(struct sdw_stream_runtime *stream);
@@ -1040,8 +1034,20 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus);
 int sdw_bus_clk_stop(struct sdw_bus *bus);
 int sdw_bus_exit_clk_stop(struct sdw_bus *bus);
 
-/* messaging and data APIs */
+int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id);
+void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
 
+#if IS_ENABLED(CONFIG_SOUNDWIRE)
+
+int sdw_stream_add_slave(struct sdw_slave *slave,
+			 struct sdw_stream_config *stream_config,
+			 struct sdw_port_config *port_config,
+			 unsigned int num_ports,
+			 struct sdw_stream_runtime *stream);
+int sdw_stream_remove_slave(struct sdw_slave *slave,
+			    struct sdw_stream_runtime *stream);
+
+/* messaging and data APIs */
 int sdw_read(struct sdw_slave *slave, u32 addr);
 int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
 int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
@@ -1053,7 +1059,86 @@ int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *
 int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 
-int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id);
-void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
+#else
+
+static inline int sdw_stream_add_slave(struct sdw_slave *slave,
+				       struct sdw_stream_config *stream_config,
+				       struct sdw_port_config *port_config,
+				       unsigned int num_ports,
+				       struct sdw_stream_runtime *stream)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_stream_remove_slave(struct sdw_slave *slave,
+					  struct sdw_stream_runtime *stream)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+/* messaging and data APIs */
+static inline int sdw_read(struct sdw_slave *slave, u32 addr)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_write(struct sdw_slave *slave, u32 addr, u8 value)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_read_no_pm(struct sdw_slave *slave, u32 addr)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+#endif /* CONFIG_SOUNDWIRE */
 
 #endif /* __SOUNDWIRE_H */
-- 
2.30.2

[PATCH v4 2/4] soundwire: Provide build stubs for common functions

[Charles Keepax]

Provide stub functions when CONFIG_SOUNDWIRE is not set for functions
that are quite likely to be used from common code on devices supporting
multiple control buses.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

Changes since v3:
 - Return error code and add WARN_ONCE in build stubs. Note I returned
   EINVAL rather than the discussed ENOSYS since it turns out checkpatch
   informs me I really shouldn't be returning ENOSYS :-)

Thanks,
Charles

 include/linux/soundwire/sdw.h | 105 ++++++++++++++++++++++++++++++----
 1 file changed, 95 insertions(+), 10 deletions(-)

diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 902ed46f76c80..132a0ee97b804 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -4,6 +4,7 @@
 #ifndef __SOUNDWIRE_H
 #define __SOUNDWIRE_H
 
+#include <linux/bug.h>
 #include <linux/mod_devicetable.h>
 #include <linux/bitfield.h>
 
@@ -1021,15 +1022,8 @@ int sdw_stream_add_master(struct sdw_bus *bus,
 		struct sdw_port_config *port_config,
 		unsigned int num_ports,
 		struct sdw_stream_runtime *stream);
-int sdw_stream_add_slave(struct sdw_slave *slave,
-		struct sdw_stream_config *stream_config,
-		struct sdw_port_config *port_config,
-		unsigned int num_ports,
-		struct sdw_stream_runtime *stream);
 int sdw_stream_remove_master(struct sdw_bus *bus,
 		struct sdw_stream_runtime *stream);
-int sdw_stream_remove_slave(struct sdw_slave *slave,
-		struct sdw_stream_runtime *stream);
 int sdw_startup_stream(void *sdw_substream);
 int sdw_prepare_stream(struct sdw_stream_runtime *stream);
 int sdw_enable_stream(struct sdw_stream_runtime *stream);
@@ -1040,8 +1034,20 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus);
 int sdw_bus_clk_stop(struct sdw_bus *bus);
 int sdw_bus_exit_clk_stop(struct sdw_bus *bus);
 
-/* messaging and data APIs */
+int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id);
+void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
 
+#if IS_ENABLED(CONFIG_SOUNDWIRE)
+
+int sdw_stream_add_slave(struct sdw_slave *slave,
+			 struct sdw_stream_config *stream_config,
+			 struct sdw_port_config *port_config,
+			 unsigned int num_ports,
+			 struct sdw_stream_runtime *stream);
+int sdw_stream_remove_slave(struct sdw_slave *slave,
+			    struct sdw_stream_runtime *stream);
+
+/* messaging and data APIs */
 int sdw_read(struct sdw_slave *slave, u32 addr);
 int sdw_write(struct sdw_slave *slave, u32 addr, u8 value);
 int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value);
@@ -1053,7 +1059,86 @@ int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *
 int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val);
 
-int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id);
-void sdw_extract_slave_id(struct sdw_bus *bus, u64 addr, struct sdw_slave_id *id);
+#else
+
+static inline int sdw_stream_add_slave(struct sdw_slave *slave,
+				       struct sdw_stream_config *stream_config,
+				       struct sdw_port_config *port_config,
+				       unsigned int num_ports,
+				       struct sdw_stream_runtime *stream)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_stream_remove_slave(struct sdw_slave *slave,
+					  struct sdw_stream_runtime *stream)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+/* messaging and data APIs */
+static inline int sdw_read(struct sdw_slave *slave, u32 addr)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_write(struct sdw_slave *slave, u32 addr, u8 value)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_write_no_pm(struct sdw_slave *slave, u32 addr, u8 value)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_read_no_pm(struct sdw_slave *slave, u32 addr)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nread_no_pm(struct sdw_slave *slave, u32 addr, size_t count, u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_nwrite_no_pm(struct sdw_slave *slave, u32 addr, size_t count, const u8 *val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+static inline int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val)
+{
+	WARN_ONCE(1, "SoundWire API is disabled");
+	return -EINVAL;
+}
+
+#endif /* CONFIG_SOUNDWIRE */
 
 #endif /* __SOUNDWIRE_H */
-- 
2.30.2

[PATCH v4 3/4] soundwire: debugfs: Switch to sdw_read_no_pm

[Charles Keepax]

It is rather inefficient to be constantly playing with the runtime
PM reference for each individual register, switch to holding a PM
runtime reference across the whole register output.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No change since v3.

 drivers/soundwire/debugfs.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/soundwire/debugfs.c b/drivers/soundwire/debugfs.c
index 49900cd207bc7..dea782e0edc4b 100644
--- a/drivers/soundwire/debugfs.c
+++ b/drivers/soundwire/debugfs.c
@@ -4,6 +4,7 @@
 #include <linux/device.h>
 #include <linux/debugfs.h>
 #include <linux/mod_devicetable.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_registers.h>
@@ -35,7 +36,7 @@ static ssize_t sdw_sprintf(struct sdw_slave *slave,
 {
 	int value;
 
-	value = sdw_read(slave, reg);
+	value = sdw_read_no_pm(slave, reg);
 
 	if (value < 0)
 		return scnprintf(buf + pos, RD_BUF - pos, "%3x\tXX\n", reg);
@@ -55,6 +56,12 @@ static int sdw_slave_reg_show(struct seq_file *s_file, void *data)
 	if (!buf)
 		return -ENOMEM;
 
+	ret = pm_runtime_resume_and_get(&slave->dev);
+	if (ret < 0 && ret != -EACCES) {
+		kfree(buf);
+		return ret;
+	}
+
 	ret = scnprintf(buf, RD_BUF, "Register  Value\n");
 
 	/* DP0 non-banked registers */
@@ -112,6 +119,10 @@ static int sdw_slave_reg_show(struct seq_file *s_file, void *data)
 	}
 
 	seq_printf(s_file, "%s", buf);
+
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put(&slave->dev);
+
 	kfree(buf);
 
 	return 0;
-- 
2.30.2

[PATCH v4 3/4] soundwire: debugfs: Switch to sdw_read_no_pm

[Charles Keepax]

It is rather inefficient to be constantly playing with the runtime
PM reference for each individual register, switch to holding a PM
runtime reference across the whole register output.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No change since v3.

 drivers/soundwire/debugfs.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/soundwire/debugfs.c b/drivers/soundwire/debugfs.c
index 49900cd207bc7..dea782e0edc4b 100644
--- a/drivers/soundwire/debugfs.c
+++ b/drivers/soundwire/debugfs.c
@@ -4,6 +4,7 @@
 #include <linux/device.h>
 #include <linux/debugfs.h>
 #include <linux/mod_devicetable.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/soundwire/sdw.h>
 #include <linux/soundwire/sdw_registers.h>
@@ -35,7 +36,7 @@ static ssize_t sdw_sprintf(struct sdw_slave *slave,
 {
 	int value;
 
-	value = sdw_read(slave, reg);
+	value = sdw_read_no_pm(slave, reg);
 
 	if (value < 0)
 		return scnprintf(buf + pos, RD_BUF - pos, "%3x\tXX\n", reg);
@@ -55,6 +56,12 @@ static int sdw_slave_reg_show(struct seq_file *s_file, void *data)
 	if (!buf)
 		return -ENOMEM;
 
+	ret = pm_runtime_resume_and_get(&slave->dev);
+	if (ret < 0 && ret != -EACCES) {
+		kfree(buf);
+		return ret;
+	}
+
 	ret = scnprintf(buf, RD_BUF, "Register  Value\n");
 
 	/* DP0 non-banked registers */
@@ -112,6 +119,10 @@ static int sdw_slave_reg_show(struct seq_file *s_file, void *data)
 	}
 
 	seq_printf(s_file, "%s", buf);
+
+	pm_runtime_mark_last_busy(&slave->dev);
+	pm_runtime_put(&slave->dev);
+
 	kfree(buf);
 
 	return 0;
-- 
2.30.2

[PATCH v4 4/4] soundwire: stream: Move remaining register accesses over to no_pm

[Charles Keepax]

There is no need to play with the runtime reference everytime a register
is accessed. All the remaining "pm" style register accesses trace back
to 4 functions:

sdw_prepare_stream
sdw_deprepare_stream
sdw_enable_stream
sdw_disable_stream

Any sensible implementation will need to hold a runtime reference
across all those functions, it makes no sense to be allowing the
device/bus to suspend whilst streams are being prepared/enabled. And
certainly in the case of the all existing users, they all call these
functions from hw_params/prepare/trigger/hw_free callbacks in ALSA,
which will have already runtime resumed all the audio devices
associated during the open callback.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No change since v3.

 drivers/soundwire/bus.c    |  2 +-
 drivers/soundwire/stream.c | 30 +++++++++++++++---------------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index ef4878258afad..d87a188fcce1e 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1214,7 +1214,7 @@ int sdw_configure_dpn_intr(struct sdw_slave *slave,
 		val &= ~SDW_DPN_INT_PORT_READY;
 	}
 
-	ret = sdw_update(slave, addr, (mask | SDW_DPN_INT_PORT_READY), val);
+	ret = sdw_update_no_pm(slave, addr, (mask | SDW_DPN_INT_PORT_READY), val);
 	if (ret < 0)
 		dev_err(&slave->dev,
 			"SDW_DPN_INTMASK write failed:%d\n", val);
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index bd502368339e5..df3b36670df4c 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -81,14 +81,14 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 	}
 
 	/* Program DPN_OffsetCtrl2 registers */
-	ret = sdw_write(slave, addr1, t_params->offset2);
+	ret = sdw_write_no_pm(slave, addr1, t_params->offset2);
 	if (ret < 0) {
 		dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed\n");
 		return ret;
 	}
 
 	/* Program DPN_BlockCtrl3 register */
-	ret = sdw_write(slave, addr2, t_params->blk_pkg_mode);
+	ret = sdw_write_no_pm(slave, addr2, t_params->blk_pkg_mode);
 	if (ret < 0) {
 		dev_err(bus->dev, "DPN_BlockCtrl3 register write failed\n");
 		return ret;
@@ -105,7 +105,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 	/* Program DPN_SampleCtrl2 register */
 	wbuf = FIELD_GET(SDW_DPN_SAMPLECTRL_HIGH, t_params->sample_interval - 1);
 
-	ret = sdw_write(slave, addr3, wbuf);
+	ret = sdw_write_no_pm(slave, addr3, wbuf);
 	if (ret < 0) {
 		dev_err(bus->dev, "DPN_SampleCtrl2 register write failed\n");
 		return ret;
@@ -115,7 +115,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 	wbuf = FIELD_PREP(SDW_DPN_HCTRL_HSTART, t_params->hstart);
 	wbuf |= FIELD_PREP(SDW_DPN_HCTRL_HSTOP, t_params->hstop);
 
-	ret = sdw_write(slave, addr4, wbuf);
+	ret = sdw_write_no_pm(slave, addr4, wbuf);
 	if (ret < 0)
 		dev_err(bus->dev, "DPN_HCtrl register write failed\n");
 
@@ -163,7 +163,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	wbuf = FIELD_PREP(SDW_DPN_PORTCTRL_DATAMODE, p_params->data_mode);
 	wbuf |= FIELD_PREP(SDW_DPN_PORTCTRL_FLOWMODE, p_params->flow_mode);
 
-	ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf);
+	ret = sdw_update_no_pm(s_rt->slave, addr1, 0xF, wbuf);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
 			"DPN_PortCtrl register write failed for port %d\n",
@@ -173,7 +173,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	if (!dpn_prop->read_only_wordlength) {
 		/* Program DPN_BlockCtrl1 register */
-		ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
+		ret = sdw_write_no_pm(s_rt->slave, addr2, (p_params->bps - 1));
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
 				"DPN_BlockCtrl1 register write failed for port %d\n",
@@ -184,7 +184,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	/* Program DPN_SampleCtrl1 register */
 	wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW;
-	ret = sdw_write(s_rt->slave, addr3, wbuf);
+	ret = sdw_write_no_pm(s_rt->slave, addr3, wbuf);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
 			"DPN_SampleCtrl1 register write failed for port %d\n",
@@ -193,7 +193,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	}
 
 	/* Program DPN_OffsetCtrl1 registers */
-	ret = sdw_write(s_rt->slave, addr4, t_params->offset1);
+	ret = sdw_write_no_pm(s_rt->slave, addr4, t_params->offset1);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
 			"DPN_OffsetCtrl1 register write failed for port %d\n",
@@ -203,7 +203,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	/* Program DPN_BlockCtrl2 register*/
 	if (t_params->blk_grp_ctrl_valid) {
-		ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl);
+		ret = sdw_write_no_pm(s_rt->slave, addr5, t_params->blk_grp_ctrl);
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
 				"DPN_BlockCtrl2 reg write failed for port %d\n",
@@ -214,7 +214,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	/* program DPN_LaneCtrl register */
 	if (slave_prop->lane_control_support) {
-		ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl);
+		ret = sdw_write_no_pm(s_rt->slave, addr6, t_params->lane_ctrl);
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
 				"DPN_LaneCtrl register write failed for port %d\n",
@@ -319,9 +319,9 @@ static int sdw_enable_disable_slave_ports(struct sdw_bus *bus,
 	 * it is safe to reset this register
 	 */
 	if (en)
-		ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
+		ret = sdw_write_no_pm(s_rt->slave, addr, p_rt->ch_mask);
 	else
-		ret = sdw_write(s_rt->slave, addr, 0x0);
+		ret = sdw_write_no_pm(s_rt->slave, addr, 0x0);
 
 	if (ret < 0)
 		dev_err(&s_rt->slave->dev,
@@ -476,9 +476,9 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 		addr = SDW_DPN_PREPARECTRL(p_rt->num);
 
 		if (prep)
-			ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
+			ret = sdw_write_no_pm(s_rt->slave, addr, p_rt->ch_mask);
 		else
-			ret = sdw_write(s_rt->slave, addr, 0x0);
+			ret = sdw_write_no_pm(s_rt->slave, addr, 0x0);
 
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
@@ -491,7 +491,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 		wait_for_completion_timeout(port_ready,
 			msecs_to_jiffies(dpn_prop->ch_prep_timeout));
 
-		val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
+		val = sdw_read_no_pm(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
 		if ((val < 0) || (val & p_rt->ch_mask)) {
 			ret = (val < 0) ? val : -ETIMEDOUT;
 			dev_err(&s_rt->slave->dev,
-- 
2.30.2

[PATCH v4 4/4] soundwire: stream: Move remaining register accesses over to no_pm

[Charles Keepax]

There is no need to play with the runtime reference everytime a register
is accessed. All the remaining "pm" style register accesses trace back
to 4 functions:

sdw_prepare_stream
sdw_deprepare_stream
sdw_enable_stream
sdw_disable_stream

Any sensible implementation will need to hold a runtime reference
across all those functions, it makes no sense to be allowing the
device/bus to suspend whilst streams are being prepared/enabled. And
certainly in the case of the all existing users, they all call these
functions from hw_params/prepare/trigger/hw_free callbacks in ALSA,
which will have already runtime resumed all the audio devices
associated during the open callback.

Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No change since v3.

 drivers/soundwire/bus.c    |  2 +-
 drivers/soundwire/stream.c | 30 +++++++++++++++---------------
 2 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index ef4878258afad..d87a188fcce1e 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1214,7 +1214,7 @@ int sdw_configure_dpn_intr(struct sdw_slave *slave,
 		val &= ~SDW_DPN_INT_PORT_READY;
 	}
 
-	ret = sdw_update(slave, addr, (mask | SDW_DPN_INT_PORT_READY), val);
+	ret = sdw_update_no_pm(slave, addr, (mask | SDW_DPN_INT_PORT_READY), val);
 	if (ret < 0)
 		dev_err(&slave->dev,
 			"SDW_DPN_INTMASK write failed:%d\n", val);
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index bd502368339e5..df3b36670df4c 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -81,14 +81,14 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 	}
 
 	/* Program DPN_OffsetCtrl2 registers */
-	ret = sdw_write(slave, addr1, t_params->offset2);
+	ret = sdw_write_no_pm(slave, addr1, t_params->offset2);
 	if (ret < 0) {
 		dev_err(bus->dev, "DPN_OffsetCtrl2 register write failed\n");
 		return ret;
 	}
 
 	/* Program DPN_BlockCtrl3 register */
-	ret = sdw_write(slave, addr2, t_params->blk_pkg_mode);
+	ret = sdw_write_no_pm(slave, addr2, t_params->blk_pkg_mode);
 	if (ret < 0) {
 		dev_err(bus->dev, "DPN_BlockCtrl3 register write failed\n");
 		return ret;
@@ -105,7 +105,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 	/* Program DPN_SampleCtrl2 register */
 	wbuf = FIELD_GET(SDW_DPN_SAMPLECTRL_HIGH, t_params->sample_interval - 1);
 
-	ret = sdw_write(slave, addr3, wbuf);
+	ret = sdw_write_no_pm(slave, addr3, wbuf);
 	if (ret < 0) {
 		dev_err(bus->dev, "DPN_SampleCtrl2 register write failed\n");
 		return ret;
@@ -115,7 +115,7 @@ static int _sdw_program_slave_port_params(struct sdw_bus *bus,
 	wbuf = FIELD_PREP(SDW_DPN_HCTRL_HSTART, t_params->hstart);
 	wbuf |= FIELD_PREP(SDW_DPN_HCTRL_HSTOP, t_params->hstop);
 
-	ret = sdw_write(slave, addr4, wbuf);
+	ret = sdw_write_no_pm(slave, addr4, wbuf);
 	if (ret < 0)
 		dev_err(bus->dev, "DPN_HCtrl register write failed\n");
 
@@ -163,7 +163,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	wbuf = FIELD_PREP(SDW_DPN_PORTCTRL_DATAMODE, p_params->data_mode);
 	wbuf |= FIELD_PREP(SDW_DPN_PORTCTRL_FLOWMODE, p_params->flow_mode);
 
-	ret = sdw_update(s_rt->slave, addr1, 0xF, wbuf);
+	ret = sdw_update_no_pm(s_rt->slave, addr1, 0xF, wbuf);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
 			"DPN_PortCtrl register write failed for port %d\n",
@@ -173,7 +173,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	if (!dpn_prop->read_only_wordlength) {
 		/* Program DPN_BlockCtrl1 register */
-		ret = sdw_write(s_rt->slave, addr2, (p_params->bps - 1));
+		ret = sdw_write_no_pm(s_rt->slave, addr2, (p_params->bps - 1));
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
 				"DPN_BlockCtrl1 register write failed for port %d\n",
@@ -184,7 +184,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	/* Program DPN_SampleCtrl1 register */
 	wbuf = (t_params->sample_interval - 1) & SDW_DPN_SAMPLECTRL_LOW;
-	ret = sdw_write(s_rt->slave, addr3, wbuf);
+	ret = sdw_write_no_pm(s_rt->slave, addr3, wbuf);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
 			"DPN_SampleCtrl1 register write failed for port %d\n",
@@ -193,7 +193,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 	}
 
 	/* Program DPN_OffsetCtrl1 registers */
-	ret = sdw_write(s_rt->slave, addr4, t_params->offset1);
+	ret = sdw_write_no_pm(s_rt->slave, addr4, t_params->offset1);
 	if (ret < 0) {
 		dev_err(&s_rt->slave->dev,
 			"DPN_OffsetCtrl1 register write failed for port %d\n",
@@ -203,7 +203,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	/* Program DPN_BlockCtrl2 register*/
 	if (t_params->blk_grp_ctrl_valid) {
-		ret = sdw_write(s_rt->slave, addr5, t_params->blk_grp_ctrl);
+		ret = sdw_write_no_pm(s_rt->slave, addr5, t_params->blk_grp_ctrl);
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
 				"DPN_BlockCtrl2 reg write failed for port %d\n",
@@ -214,7 +214,7 @@ static int sdw_program_slave_port_params(struct sdw_bus *bus,
 
 	/* program DPN_LaneCtrl register */
 	if (slave_prop->lane_control_support) {
-		ret = sdw_write(s_rt->slave, addr6, t_params->lane_ctrl);
+		ret = sdw_write_no_pm(s_rt->slave, addr6, t_params->lane_ctrl);
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
 				"DPN_LaneCtrl register write failed for port %d\n",
@@ -319,9 +319,9 @@ static int sdw_enable_disable_slave_ports(struct sdw_bus *bus,
 	 * it is safe to reset this register
 	 */
 	if (en)
-		ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
+		ret = sdw_write_no_pm(s_rt->slave, addr, p_rt->ch_mask);
 	else
-		ret = sdw_write(s_rt->slave, addr, 0x0);
+		ret = sdw_write_no_pm(s_rt->slave, addr, 0x0);
 
 	if (ret < 0)
 		dev_err(&s_rt->slave->dev,
@@ -476,9 +476,9 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 		addr = SDW_DPN_PREPARECTRL(p_rt->num);
 
 		if (prep)
-			ret = sdw_write(s_rt->slave, addr, p_rt->ch_mask);
+			ret = sdw_write_no_pm(s_rt->slave, addr, p_rt->ch_mask);
 		else
-			ret = sdw_write(s_rt->slave, addr, 0x0);
+			ret = sdw_write_no_pm(s_rt->slave, addr, 0x0);
 
 		if (ret < 0) {
 			dev_err(&s_rt->slave->dev,
@@ -491,7 +491,7 @@ static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
 		wait_for_completion_timeout(port_ready,
 			msecs_to_jiffies(dpn_prop->ch_prep_timeout));
 
-		val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
+		val = sdw_read_no_pm(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
 		if ((val < 0) || (val & p_rt->ch_mask)) {
 			ret = (val < 0) ? val : -ETIMEDOUT;
 			dev_err(&s_rt->slave->dev,
-- 
2.30.2

Re: [PATCH v4 0/4] Minor SoundWire clean ups

[Vinod Koul]

On 25-11-22, 14:20, Charles Keepax wrote:
> Just some minor tidy ups and preparation for starting to upstream some
> Cirrus SoundWire devices. The first three patches are pretty trivial,
> the last patch which moves the remaining core over to using the no_pm
> functions could probably use some careful review.

Applied, thanks

> 
> Changes since v3:
>  - Return an error and add a WARN_ONCE if the build stubs are used.
> 
> Changes since v2:
>  - Fix up a memory leak of a buffer on the error path
>  - Added some reviewed by's
> 
> Thanks,
> Charles
> 
> *** BLURB HERE ***

oops :)

 
> 
> Charles Keepax (3):
>   soundwire: Provide build stubs for common functions
>   soundwire: debugfs: Switch to sdw_read_no_pm
>   soundwire: stream: Move remaining register accesses over to no_pm
> 
> Simon Trimmer (1):
>   soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
> 
>  drivers/soundwire/bus.c       |  10 ++--
>  drivers/soundwire/debugfs.c   |  13 ++++-
>  drivers/soundwire/stream.c    |  30 +++++-----
>  include/linux/soundwire/sdw.h | 107 ++++++++++++++++++++++++++++++----
>  4 files changed, 129 insertions(+), 31 deletions(-)
> 
> -- 
> 2.30.2

-- 
~Vinod

Re: [PATCH v4 0/4] Minor SoundWire clean ups

[Vinod Koul]

On 25-11-22, 14:20, Charles Keepax wrote:
> Just some minor tidy ups and preparation for starting to upstream some
> Cirrus SoundWire devices. The first three patches are pretty trivial,
> the last patch which moves the remaining core over to using the no_pm
> functions could probably use some careful review.

Applied, thanks

> 
> Changes since v3:
>  - Return an error and add a WARN_ONCE if the build stubs are used.
> 
> Changes since v2:
>  - Fix up a memory leak of a buffer on the error path
>  - Added some reviewed by's
> 
> Thanks,
> Charles
> 
> *** BLURB HERE ***

oops :)

 
> 
> Charles Keepax (3):
>   soundwire: Provide build stubs for common functions
>   soundwire: debugfs: Switch to sdw_read_no_pm
>   soundwire: stream: Move remaining register accesses over to no_pm
> 
> Simon Trimmer (1):
>   soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions
> 
>  drivers/soundwire/bus.c       |  10 ++--
>  drivers/soundwire/debugfs.c   |  13 ++++-
>  drivers/soundwire/stream.c    |  30 +++++-----
>  include/linux/soundwire/sdw.h | 107 ++++++++++++++++++++++++++++++----
>  4 files changed, 129 insertions(+), 31 deletions(-)
> 
> -- 
> 2.30.2

-- 
~Vinod